Pretraživanje
Prikaz rezultata 101-110 od 111
The resistance to crack growth of different regions of weldments in a real structure
(International Journal of Pressure Vessels and Piping, 1992)
The growth of a crack in regions of welded joints, made from high-strength low-alloy steel, has been analysed on specimens and full-scale structures. The effect of such crack growth on the safety of welded steel pressure ...
Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach
(MDPI, 2023)
The research represents the ongoing investigation of the welded joints behavior made
of low-carbon low-alloyed steel in the presence of different multiple defects. Following the initial
experimental and numerical analyses ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
The Influence of Modifying Methods on the Quality of Eutectic and Hypereutectic Silumine for Diesel Engine Pistons
(International Journal of Cast Metals Research, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
Assessment of Grain Size and Grain Refinement Efficiency by Calculation of Released Heat Attributed to Formation of Primary Aluminum Crystals During Solidification of Al7Si4Cu Alloy
(Springer India, New Delhi, )
Assessing heat released only related to the formation of primary crystals provides results with a significantly higher sensitivity than a traditional assessment of undercooling value. In this work, two similar Ti5B1 master ...
Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens
(International Institute for the Science of Sintering, 2022)
This paper presents a part of development of a non-standard method for testing of cylindrical test specimens for measurement of fracture properties of pipeline materials. This method for testing of cylindrical structures ...
Hydroxyapatite-based dental inserts: Microstructure, mechanical properties, bonding efficiency and fracture resistance of molars with occlusal restorations
(Wiley, 2023)
This study aimed to (1) comparatively analyze properties of Sr- and Mg-substituted hydroxyapatite (HAP)-based dental inserts; (2) evaluate insert bonding to restorative materials, and (3) evaluate the effect of doped HAP ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Science of Sintering, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale
(Springer Heidelberg, Heidelberg, 2020)
Metal matrix composites are very inhomogeneous materials, and their properties depend on various parameters (production process, constituents, their interfaces, etc.). The influence of SiC microparticles (40 mu m) reinforcement ...
High-temperature deformation behaviour of Ti3Al-11Nb intermetallic
(Carl Hanser Verlag, Munich, 2011)
A mechanism of high-temperature plasticity has been studied in terms of stress exponent and activation energy for deformation. A Ti3Al-based intermetallic was processed by hot-rolling in the two-phase field to accomplish ...