Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
Само за регистроване кориснике
2019
Аутори
Kovacević, TihomirRusmirović, Jelena D.
Tomić, Nataša
Mladenović, Goran
Milošević, Miloš
Mitrović, Nenad
Marinković, Aleksandar
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated polyester resin (UPR)-based composites was main topic presented in this paper. NMF particles were treated using four different oxidative/etching agents: H2SO4/KMnO4 (NMF1), H2SO4/HNO3 (NMF2), HNO3 (NMF3), and NaOH (NMF4). Treated NMF(1-4) particles were characterized using fourier transform infrared, Boehm titration, optical microscopy and SEM analysis. Tensile strength and micro Vickers hardness of UPR/NMF(1-4) composites were the most improved with addition of 0.5wt% of filler, for 5.9-24.7%, in comparison to composite filled with non-treated NMF particles. Cross-linking density (nu), storage, and loss modulus (G' and G''), damping factor (tan delta) and glass transition temperature (T-g) of the composites were determined from the dynamic-mechanical analysis (DMA) test...ing. Shrinkage measurements, performed using Aramis 6.2.0, showed significant improvement in shrinkage reducing, for 17.8-30.6%, by introduction the oxidized NMF particles. Qualitative/quantitative evaluation of NMF(1-4) surface functionalities helped in understanding their influences on mechanical, DMA and shrinkage properties change of studied composites. POLYM. COMPOS., 40:1170-1186, 2019.
Извор:
Polymer Composites, 2019, 40, 3, 1170-1186Издавач:
- Wiley, Hoboken
Финансирање / пројекти:
- Иновативна синергија нус-продуката, минимизације отпада и чистије производње у металургији (RS-34033)
- Развој опреме и процеса добијања полимерних композитних материјала са унапред дефинисаним функционалним својствима (RS-34011)
- Усмерена синтеза, структура и својства мултифункционалних материјала (RS-172057)
DOI: 10.1002/pc.24827
ISSN: 0272-8397
WoS: 000460659700033
Scopus: 2-s2.0-85062649306
Институција/група
Inovacioni centarTY - JOUR AU - Kovacević, Tihomir AU - Rusmirović, Jelena D. AU - Tomić, Nataša AU - Mladenović, Goran AU - Milošević, Miloš AU - Mitrović, Nenad AU - Marinković, Aleksandar PY - 2019 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3089 AB - The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated polyester resin (UPR)-based composites was main topic presented in this paper. NMF particles were treated using four different oxidative/etching agents: H2SO4/KMnO4 (NMF1), H2SO4/HNO3 (NMF2), HNO3 (NMF3), and NaOH (NMF4). Treated NMF(1-4) particles were characterized using fourier transform infrared, Boehm titration, optical microscopy and SEM analysis. Tensile strength and micro Vickers hardness of UPR/NMF(1-4) composites were the most improved with addition of 0.5wt% of filler, for 5.9-24.7%, in comparison to composite filled with non-treated NMF particles. Cross-linking density (nu), storage, and loss modulus (G' and G''), damping factor (tan delta) and glass transition temperature (T-g) of the composites were determined from the dynamic-mechanical analysis (DMA) testing. Shrinkage measurements, performed using Aramis 6.2.0, showed significant improvement in shrinkage reducing, for 17.8-30.6%, by introduction the oxidized NMF particles. Qualitative/quantitative evaluation of NMF(1-4) surface functionalities helped in understanding their influences on mechanical, DMA and shrinkage properties change of studied composites. POLYM. COMPOS., 40:1170-1186, 2019. PB - Wiley, Hoboken T2 - Polymer Composites T1 - Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites EP - 1186 IS - 3 SP - 1170 VL - 40 DO - 10.1002/pc.24827 ER -
@article{ author = "Kovacević, Tihomir and Rusmirović, Jelena D. and Tomić, Nataša and Mladenović, Goran and Milošević, Miloš and Mitrović, Nenad and Marinković, Aleksandar", year = "2019", abstract = "The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated polyester resin (UPR)-based composites was main topic presented in this paper. NMF particles were treated using four different oxidative/etching agents: H2SO4/KMnO4 (NMF1), H2SO4/HNO3 (NMF2), HNO3 (NMF3), and NaOH (NMF4). Treated NMF(1-4) particles were characterized using fourier transform infrared, Boehm titration, optical microscopy and SEM analysis. Tensile strength and micro Vickers hardness of UPR/NMF(1-4) composites were the most improved with addition of 0.5wt% of filler, for 5.9-24.7%, in comparison to composite filled with non-treated NMF particles. Cross-linking density (nu), storage, and loss modulus (G' and G''), damping factor (tan delta) and glass transition temperature (T-g) of the composites were determined from the dynamic-mechanical analysis (DMA) testing. Shrinkage measurements, performed using Aramis 6.2.0, showed significant improvement in shrinkage reducing, for 17.8-30.6%, by introduction the oxidized NMF particles. Qualitative/quantitative evaluation of NMF(1-4) surface functionalities helped in understanding their influences on mechanical, DMA and shrinkage properties change of studied composites. POLYM. COMPOS., 40:1170-1186, 2019.", publisher = "Wiley, Hoboken", journal = "Polymer Composites", title = "Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites", pages = "1186-1170", number = "3", volume = "40", doi = "10.1002/pc.24827" }
Kovacević, T., Rusmirović, J. D., Tomić, N., Mladenović, G., Milošević, M., Mitrović, N.,& Marinković, A.. (2019). Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites. in Polymer Composites Wiley, Hoboken., 40(3), 1170-1186. https://doi.org/10.1002/pc.24827
Kovacević T, Rusmirović JD, Tomić N, Mladenović G, Milošević M, Mitrović N, Marinković A. Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites. in Polymer Composites. 2019;40(3):1170-1186. doi:10.1002/pc.24827 .
Kovacević, Tihomir, Rusmirović, Jelena D., Tomić, Nataša, Mladenović, Goran, Milošević, Miloš, Mitrović, Nenad, Marinković, Aleksandar, "Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites" in Polymer Composites, 40, no. 3 (2019):1170-1186, https://doi.org/10.1002/pc.24827 . .