Претраживање
Приказ резултата 1-10 од 84
Integrity assessment and determination of residual fatigue life of vital parts of bucket-wheel excavator operating under dynamic loads
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper are presented results of tests and analyses of complex dynamic loads carried out on the bucket-wheel excavator SchRs 650/5x24 Krupp, as well as assessment of service life of vital welded structures of a ...
Fracture mechanics and fatigue crack propagation in armor steel welds
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The welding process of armor steel is a complex process due to possible welding faults appearing in all zones of weld metal joint in the form of cracks and pores, as results of high percentage of carbon in the base metal. ...
Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, the results of determining the Paris law coefficients, C and m, are presented, based on the experimental data obtained by three-point bending testing of 8 welded joint specimens. The specimens were taken ...
Thermal-hydraulics of helium cooled First Wall channels and scoping investigations on performance improvement by application of ribs and mixing devices
(Elsevier Science Sa, Lausanne, 2016)
The first wall (FW) of DEMO is a component with high thermal loads. The cooling of the FW has to comply with the material's upper and lower temperature limits and requirements from stress assessment, like low temperature ...
Life Cycle Impact Assessment of Miscanthus Crop for Sustainable Household Heating in Serbia
(MDPI, Basel, 2018)
This paper investigates the environmental impacts and energy benefits of the cultivation of Miscanthus (Miscanthus x giganteus Greef et Deu.), in order to initiate its use in sustainable household heating in the Republic ...
Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength
(MDPI, Basel, 2016)
The paper presents a study on the surface modifications of nickel based superalloy Nimonic 263 induced by laser shock peening (LSP) process. The process was performed by Nd3+:Yttrium Aluminium Garnet (YAG) picosecond laser ...
Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
(Elsevier Sci Ltd, Oxford, 2017)
This paper describes fatigue crack growth in a friction stir welded T joints made of aluminum alloy A2024-T351 under three point bending loads. For this purpose, three dimensional homogeneous isotropic model is used to ...
Utilization of waste ceramics and roof tiles for radionuclide sorption
(Inst Chemical Engineers, Rugby, 2017)
The possible utilization of waste ceramic (CT) and roof tiles (RT), as sorbents for liquid radioactive waste (LRW) treatment, was investigated. Following the European directives on waste and politics of saving natural raw ...
Design of capacitive voltage divider for measuring ultrafast voltages
(Elsevier Sci Ltd, Oxford, 2018)
The aim of this paper is to consider and analyze design of capacitive voltage divider for measuring ultrafast voltage occurrence. Measuring pulse voltages by means of a capacitive divider in nanosecond range is affected ...
Creep crack growth properties of P91 and P22 welded joints
(Wiley, Hoboken, 2017)
The ferritic P22 and bainitic-martenstic P91 steel welded joints operating at elevated temperatures are highly vulnerable to premature failure, because microstructure gradients can lead to cracking in the heat-affected ...