Претраживање
Приказ резултата 1-10 од 77
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Component failures due to the hydrogen embrittlement (HE) were observed in different industrial systems, including high-pressure hydrogen storage tanks, aircraft components, high-strength alloy components, and high-strength ...
Multi-objective design optimization strategies for small-scale vertical-axis wind turbines
(Springer, New York, 2016)
Extracting energy from wind has been an interesting and serious topic over the last few decades and a lot of work has been done on the subject. This paper discusses in detail possible approaches to optimization of a somewhat ...
Hydrogen Embrittlement of Industrial Components: Prediction, Prevention, and Models
(Natl Assoc Corrosion Eng, Houston, 2016)
Hydrogen embrittlement is a common, dangerous, and poorly understood cause of failure in many metal alloys. In practice, it is observed that different types of damage to industrial components have been tied to the presence ...
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
Local brittle zones (LBZ) cause the unstable fracture behaviour of weld metals. This threatens the safe service of welded structures and makes structural assessment procedures difficult. Therefore, the unstable fracture ...
Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams
(Elsevier Science Inc, New York, 2002)
In consideration of the very high energy consumption of drying processes it is astonishing and disadvantageous that the majority of industrial dryers are offered and operated without energy recovery. The avoidance of fouling ...
Model analysis of bucket wheel excavator SchRs 630 strength
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
The possibilities of testing real constructions are often limited, especially in case of large constructions. The idea of model testing is to create a sub-scaled model in order to anticipate the behavior of the real ...
Fracture properties of multiphase alloy MP35N
(Elsevier Science Sa, Lausanne, 2003)
This paper addresses the fracture properties of commercially cold-drawn (53%) MP35N (35% Co, 35% Ni, 20% Cr, and 10% Mo) in both the cold-worked and the cold-worked and aged conditions. MP35N is a superalloy that exhibits ...
New modular concept for the helium cooled pebble bed test blanket module for ITER
(Elsevier Science Sa, Lausanne, 2005)
Starting from the latest European design of the HCPB blanket for the DEMO a test blanket module for ITER has been deduced. The paper describes the new design and presents the rational of the design choices and the results ...
Prediction of ductile fracture initiation using micromechanical analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
In the paper ductile fracture initiation analysis of low-alloyed ferritic steel has been made by application of two micromechanical models: the Rice-Tracey void growth model and the Gurson-Tvergaard-Needleman (GTN) model. ...
Plane strain fracture toughness of MP35N in aged and unaged conditions measured using modified CT specimens
(Elsevier Science Sa, Lausanne, 2003)
The multiphase alloy MP35N (35% Ni, 35% Co, 10% Mo, 20% Cr) is a high strength, high toughness alloy of choice for several safety-critical applications in aerospace, oil drilling, and biomedical industries. Several previous ...