Претраживање
Приказ резултата 1-10 од 84
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module Part 2: Presentation of results
(Elsevier Science Sa, Lausanne, 2015)
This paper is the continuation of the first report on investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module for ITER submitted to this Journal (see Ilic et al. [ID. The investigations ...
Active boundary layer control in linear cascades using CFD and artificial neural networks
(Elsevier France-Editions Scientifiques Medicales Elsevier, Issy-Les-Moulineaux, 2014)
Flow field in linear cascades under high subsonic/transonic conditions has been investigated numerically. Active boundary layer control was employed in the form of sources (jets) distributed across the upper surface of the ...
Failure investigation of the bucket wheel excavator crawler chain link
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The high mobility of open pit machines in heavy duty conditions provides fertile ground for the occurrence of various failures of the traveling mechanisms' vital parts such as chain links. The goal of the study presented ...
Experimental studies on active vibration control of a smart composite beam using a PID controller
(IOP Publishing Ltd, Bristol, 2013)
This paper presents experimental verification of the active vibration control of a smart cantilever composite beam using a PID controller. In order to prevent negative occurrences in the derivative and integral terms in a ...
HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
(Elsevier Science Sa, Lausanne, 2011)
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first ...
Compressive strains and displacement in a partially dentate lower jaw rehabilitated with two different treatment modalities
(Wiley, Hoboken, 2012)
Background: Understanding of the biomechanical consequences of the stresses generated to the supporting bone during occlusal loading is significant for improving the design and clinical planning process in partial edentulism ...
Geometry, mechanical and ballistic properties of ADI material perforated plates
(Elsevier Sci Ltd, Oxford, 2015)
In this paper, austempered ductile iron has been evaluated as an alternative to steel for perforated plates applied in the ballistic protection of military vehicles. The austempering was performed in lower and higher ...
An attempt to create a standardized (reference) model for experimental investigations on implant's sample
(Elsevier Sci Ltd, Oxford, 2015)
The aim of this study was to determine, evaluate and measure strain of vertically loaded implant using the digital image correlation method. The Straumann (R) dental implant system with the SLActive (R) surface was used ...
Thermal-hydraulic analysis of a steam boiler with rifled evaporating tubes
(Pergamon-Elsevier Science Ltd, Oxford, 2007)
Rifled evaporating tubes are applied in the steam boilers with the aim to increase the steam-water mixture turbulization and to prevent the burnout of tubes walls. The rifled evaporating tubes and the working fluid forced ...
A computer code for the prediction of mill gases and hot air distribution between burners' sections at the utility boiler
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
One of the main tasks during the design or simulation and analyses of the utility steam boiler operation is the prediction of a distribution of mill gases and hot air flow rates between burners' sections. These are the ...