Претраживање
Приказ резултата 1-7 од 7
Effect of laser beam welded reinforcement on integral skin panel fatigue life
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, numerical analyses of fatigue crack growth in integral skin-stringer panel produced by means of laser beam welding (LBW) are presented along with fatigue results verified by previously conducted experiments. ...
Structural integrity and life assessment of rotating equipment
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
Failures of rotating equipment often cause severe consequences, so it is necessary to study their integrity and life as detailed as possible, especially when crack is detected. In the case studied here, hydro power plant ...
XFEM based analysis of fatigue crack growth in damaged wing-uselage attachment lug
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
The research presented in this paper is based on the use of extended finite element method (XFEM) for stress intensity factors (SIFs) determination in the case of fatigue crack presented in the wing-fuselage attachment lug ...
Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, the results of determining the Paris law coefficients, C and m, are presented, based on the experimental data obtained by three-point bending testing of 8 welded joint specimens. The specimens were taken ...
Fracture mechanics and fatigue crack propagation in armor steel welds
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The welding process of armor steel is a complex process due to possible welding faults appearing in all zones of weld metal joint in the form of cracks and pores, as results of high percentage of carbon in the base metal. ...
Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
(Elsevier Sci Ltd, Oxford, 2017)
This paper describes fatigue crack growth in a friction stir welded T joints made of aluminum alloy A2024-T351 under three point bending loads. For this purpose, three dimensional homogeneous isotropic model is used to ...
Numerical analysis of fatigue crack growth of hip implant
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Fatigue crack growth in hip implant has been analysed using the extended finite element method. Toward this aim, the three-dimensional finite element model is created and used in ABAQUS and Morfeo/crack add-in for ABAQUS ...