Brkić, A., Spasojević Brkić, V., Mihajlović, I., Misita, M., Đurić, G., Bugarić, U.,& Stević, Ž.. (2024). Контекстуални адаптивни систем за митигацију ризика рада рударских машина. in Odluka Matičnog odbora od 29.03.2024. o kategorizaciji M81- Novo tehničko rešenje primenjeno na međunarodnom nivou.
https://hdl.handle.net/21.15107/rcub_machinery_7796

Brkić A, Spasojević Brkić V, Mihajlović I, Misita M, Đurić G, Bugarić U, Stević Ž. Контекстуални адаптивни систем за митигацију ризика рада рударских машина. in Odluka Matičnog odbora od 29.03.2024. o kategorizaciji M81- Novo tehničko rešenje primenjeno na međunarodnom nivou. 2024;.
https://hdl.handle.net/21.15107/rcub_machinery_7796 .

Brkić, Aleksandar, Spasojević Brkić, Vesna, Mihajlović, Ivan, Misita, Mirjana, Đurić, Goran, Bugarić, Uglješa, Stević, Željko, "Контекстуални адаптивни систем за митигацију ризика рада рударских машина" in Odluka Matičnog odbora od 29.03.2024. o kategorizaciji M81- Novo tehničko rešenje primenjeno na međunarodnom nivou (2024),
https://hdl.handle.net/21.15107/rcub_machinery_7796 .

TY  - JOUR
AU  - Alsharif, Abdulghder Mohahmed
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Mihajlović, Ivan
AU  - Brkić, Aleksandar
AU  - Papić, Neda
AU  - Perišić, Martina
PY  - 2024
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7746
AB  - Transport and mining companies are vulnerable to a variety of hazards, and this paper offers a novel conceptual framework for organisational resilience assessment at different organisational levels. It is based on a safety climate and performances assessment in companies in the transport and mining sector. The framework contains factor and reliability analysis and continues by applying the SMART method from the perspective of resilience corners: anticipate, monitor, react and learn. The highest resilience coefficients at all organisational levels are obtained regarding safety awareness, safety training and safety communication areas, while the lowest values are observed for risk assessment and the organisational environment. The obtained results indicate that the ‘monitor’ resilience corner must be improved at all organisational levels, employees trained and procedures changed, since employees do not sufficiently use experience from previous events. The very high values at all organisational levels of the coefficients regarding the ‘anticipate’ and ‘learn’ resilience corners indicate organisational adaptation to changes through corrective activities, rather than planned preventive ones. All hierarchical levels have good resilience indicators, except for middle management, which expressed an adequate resilience index, due to the lower ratings of the safety training, organisational commitment, risk assessment and management support areas.
PB  - Taylor & Francis
T2  - Civil Engineering and Environmental Systems
T1  - The safety climate, hierarchical levels and resilience assessment in transport and mining companies
DO  - 10.1080/10286608.2024.2313753
ER  - 

@article{
author = "Alsharif, Abdulghder Mohahmed and Spasojević Brkić, Vesna and Misita, Mirjana and Mihajlović, Ivan and Brkić, Aleksandar and Papić, Neda and Perišić, Martina",
year = "2024",
abstract = "Transport and mining companies are vulnerable to a variety of hazards, and this paper offers a novel conceptual framework for organisational resilience assessment at different organisational levels. It is based on a safety climate and performances assessment in companies in the transport and mining sector. The framework contains factor and reliability analysis and continues by applying the SMART method from the perspective of resilience corners: anticipate, monitor, react and learn. The highest resilience coefficients at all organisational levels are obtained regarding safety awareness, safety training and safety communication areas, while the lowest values are observed for risk assessment and the organisational environment. The obtained results indicate that the ‘monitor’ resilience corner must be improved at all organisational levels, employees trained and procedures changed, since employees do not sufficiently use experience from previous events. The very high values at all organisational levels of the coefficients regarding the ‘anticipate’ and ‘learn’ resilience corners indicate organisational adaptation to changes through corrective activities, rather than planned preventive ones. All hierarchical levels have good resilience indicators, except for middle management, which expressed an adequate resilience index, due to the lower ratings of the safety training, organisational commitment, risk assessment and management support areas.",
publisher = "Taylor & Francis",
journal = "Civil Engineering and Environmental Systems",
title = "The safety climate, hierarchical levels and resilience assessment in transport and mining companies",
doi = "10.1080/10286608.2024.2313753"
}

Alsharif, A. M., Spasojević Brkić, V., Misita, M., Mihajlović, I., Brkić, A., Papić, N.,& Perišić, M.. (2024). The safety climate, hierarchical levels and resilience assessment in transport and mining companies. in Civil Engineering and Environmental Systems
Taylor & Francis..
https://doi.org/10.1080/10286608.2024.2313753

Alsharif AM, Spasojević Brkić V, Misita M, Mihajlović I, Brkić A, Papić N, Perišić M. The safety climate, hierarchical levels and resilience assessment in transport and mining companies. in Civil Engineering and Environmental Systems. 2024;.
doi:10.1080/10286608.2024.2313753 .

Alsharif, Abdulghder Mohahmed, Spasojević Brkić, Vesna, Misita, Mirjana, Mihajlović, Ivan, Brkić, Aleksandar, Papić, Neda, Perišić, Martina, "The safety climate, hierarchical levels and resilience assessment in transport and mining companies" in Civil Engineering and Environmental Systems (2024),
https://doi.org/10.1080/10286608.2024.2313753 . .

TY  - CONF
AU  - Janev, Nemanja
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Mihajlović, Ivan
AU  - Perišić, Martina
AU  - Papić, Neda
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7111
AB  - For the production planning process to be successful, an enterprise's internal business processes
must be effective and efficient, while the DMAIC cycle is important aspect of practice-based continuous
improvement. In accordance to those facts, this preliminary research includes the first part of the DMAIC
methodology - “define“ and “measure“ tools, applied to a case study in automotive industry, with the aim of
improving production planning processes. Analysis in “define“ phase starts with SIPOC, continues with
calculation of critical indicators in “measure“ phase and is followed by Pareto charts. Research shows that
the existing method of manual collection of production data is not precise enough, and during two months
observation period, between 14 and 52 percent of planned production time on 9 observed machines, passed
as unnoticed downtime. Further data analysis showed that this time is 1.5 to 9 times higher than the total
reported downtime on individual machines. Results show that the further development of data collection
tools is crucial, and the recommendation is to move in the direction of automation of that process in order
to make the most of available technical resources, in “improve“ phase and to “control“ it by statistical
comparison of previous and new state indicators
PB  - Industrial Innovation in Digital Age
C3  - Proceedings on 19th International Conference on Industrial Systems – IS’23
T1  - PRODUCTION PLANNING AND “DEFINE, MEASURE AND ANALYSIS“ TOOLS IN AUTOMOTIVE INDUSTRY AS PREREQUISITE OF AUTOMATION: A CASE STUDY
EP  - 395
SP  - 390
VL  - 19
DO  - 10.24867/IS-2023-T6.2-6_07541
ER  - 

@conference{
author = "Janev, Nemanja and Spasojević Brkić, Vesna and Misita, Mirjana and Mihajlović, Ivan and Perišić, Martina and Papić, Neda",
year = "2023",
abstract = "For the production planning process to be successful, an enterprise's internal business processes
must be effective and efficient, while the DMAIC cycle is important aspect of practice-based continuous
improvement. In accordance to those facts, this preliminary research includes the first part of the DMAIC
methodology - “define“ and “measure“ tools, applied to a case study in automotive industry, with the aim of
improving production planning processes. Analysis in “define“ phase starts with SIPOC, continues with
calculation of critical indicators in “measure“ phase and is followed by Pareto charts. Research shows that
the existing method of manual collection of production data is not precise enough, and during two months
observation period, between 14 and 52 percent of planned production time on 9 observed machines, passed
as unnoticed downtime. Further data analysis showed that this time is 1.5 to 9 times higher than the total
reported downtime on individual machines. Results show that the further development of data collection
tools is crucial, and the recommendation is to move in the direction of automation of that process in order
to make the most of available technical resources, in “improve“ phase and to “control“ it by statistical
comparison of previous and new state indicators",
publisher = "Industrial Innovation in Digital Age",
journal = "Proceedings on 19th International Conference on Industrial Systems – IS’23",
title = "PRODUCTION PLANNING AND “DEFINE, MEASURE AND ANALYSIS“ TOOLS IN AUTOMOTIVE INDUSTRY AS PREREQUISITE OF AUTOMATION: A CASE STUDY",
pages = "395-390",
volume = "19",
doi = "10.24867/IS-2023-T6.2-6_07541"
}

Janev, N., Spasojević Brkić, V., Misita, M., Mihajlović, I., Perišić, M.,& Papić, N.. (2023). PRODUCTION PLANNING AND “DEFINE, MEASURE AND ANALYSIS“ TOOLS IN AUTOMOTIVE INDUSTRY AS PREREQUISITE OF AUTOMATION: A CASE STUDY. in Proceedings on 19th International Conference on Industrial Systems – IS’23
Industrial Innovation in Digital Age., 19, 390-395.
https://doi.org/10.24867/IS-2023-T6.2-6_07541

Janev N, Spasojević Brkić V, Misita M, Mihajlović I, Perišić M, Papić N. PRODUCTION PLANNING AND “DEFINE, MEASURE AND ANALYSIS“ TOOLS IN AUTOMOTIVE INDUSTRY AS PREREQUISITE OF AUTOMATION: A CASE STUDY. in Proceedings on 19th International Conference on Industrial Systems – IS’23. 2023;19:390-395.
doi:10.24867/IS-2023-T6.2-6_07541 .

Janev, Nemanja, Spasojević Brkić, Vesna, Misita, Mirjana, Mihajlović, Ivan, Perišić, Martina, Papić, Neda, "PRODUCTION PLANNING AND “DEFINE, MEASURE AND ANALYSIS“ TOOLS IN AUTOMOTIVE INDUSTRY AS PREREQUISITE OF AUTOMATION: A CASE STUDY" in Proceedings on 19th International Conference on Industrial Systems – IS’23, 19 (2023):390-395,
https://doi.org/10.24867/IS-2023-T6.2-6_07541 . .

TY  - CONF
AU  - Brkić, Aleksandar
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Papić, Neda
AU  - Perišić, Martina
AU  - Janev, Nemanja
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6951
AB  - Two-level risk mapping and assessment methodology was proposed with several criteria for risk prioritization (frequency of occurrence, downtime, level of danger, type of stoppage, cause of downtime, risk number). In a period of one year all stoppages, both planned and unplanned, were monitored and later on classified by type into: technological, mechanical, electrical, stoppages caused by the machine operator, external stoppages, which include stoppages of machine inactivity due to weather conditions and the like. The methodology proposed is oriented towards the calculation of risks to people, property, etc., which arise from various types of downtime. Then, based on the recording of data on stoppages of the observed machine, the structure of the share of individual stoppages was analyzed and appropriate measures to prevent
incidents/accidents were recommended. The main causes of stoppages are isolated based on the frequency of occurrence, the percentage of the downtime duration in the total time spent and the level of danger. The primary cause of stoppages according to the mentioned criteria is the rupture of the hose in the observed machine with percentage participation in the duration of mechanical stoppages of 25.17%, with a frequency of 25% and a degree of danger of 6, while repairing the rod clamp is the second causal factor singled out as important from the risk aspect. Thanks to this, it is possible to plan maintenance activities and manage risks in an adequate way. The proposal for further research is further performance prediction and the determination of optimum operating parameters for different working conditions.
PB  - Elsevier
C3  - Procedia Structural Integrity
T1  - Methodology for Analysing Risk Factor on Surface Top Hammer Drill Rig
EP  - 103
IS  - C
SP  - 96
VL  - 48
DO  - 10.1016/j.prostr.2023.07.115
ER  - 

@conference{
author = "Brkić, Aleksandar and Spasojević Brkić, Vesna and Misita, Mirjana and Papić, Neda and Perišić, Martina and Janev, Nemanja",
year = "2023",
abstract = "Two-level risk mapping and assessment methodology was proposed with several criteria for risk prioritization (frequency of occurrence, downtime, level of danger, type of stoppage, cause of downtime, risk number). In a period of one year all stoppages, both planned and unplanned, were monitored and later on classified by type into: technological, mechanical, electrical, stoppages caused by the machine operator, external stoppages, which include stoppages of machine inactivity due to weather conditions and the like. The methodology proposed is oriented towards the calculation of risks to people, property, etc., which arise from various types of downtime. Then, based on the recording of data on stoppages of the observed machine, the structure of the share of individual stoppages was analyzed and appropriate measures to prevent
incidents/accidents were recommended. The main causes of stoppages are isolated based on the frequency of occurrence, the percentage of the downtime duration in the total time spent and the level of danger. The primary cause of stoppages according to the mentioned criteria is the rupture of the hose in the observed machine with percentage participation in the duration of mechanical stoppages of 25.17%, with a frequency of 25% and a degree of danger of 6, while repairing the rod clamp is the second causal factor singled out as important from the risk aspect. Thanks to this, it is possible to plan maintenance activities and manage risks in an adequate way. The proposal for further research is further performance prediction and the determination of optimum operating parameters for different working conditions.",
publisher = "Elsevier",
journal = "Procedia Structural Integrity",
title = "Methodology for Analysing Risk Factor on Surface Top Hammer Drill Rig",
pages = "103-96",
number = "C",
volume = "48",
doi = "10.1016/j.prostr.2023.07.115"
}

Brkić, A., Spasojević Brkić, V., Misita, M., Papić, N., Perišić, M.,& Janev, N.. (2023). Methodology for Analysing Risk Factor on Surface Top Hammer Drill Rig. in Procedia Structural Integrity
Elsevier., 48(C), 96-103.
https://doi.org/10.1016/j.prostr.2023.07.115

Brkić A, Spasojević Brkić V, Misita M, Papić N, Perišić M, Janev N. Methodology for Analysing Risk Factor on Surface Top Hammer Drill Rig. in Procedia Structural Integrity. 2023;48(C):96-103.
doi:10.1016/j.prostr.2023.07.115 .

Brkić, Aleksandar, Spasojević Brkić, Vesna, Misita, Mirjana, Papić, Neda, Perišić, Martina, Janev, Nemanja, "Methodology for Analysing Risk Factor on Surface Top Hammer Drill Rig" in Procedia Structural Integrity, 48, no. C (2023):96-103,
https://doi.org/10.1016/j.prostr.2023.07.115 . .

TY  - JOUR
AU  - Janev, Nemanja
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Perišić, Martina
AU  - Papić, Neda
PY  - 2023
UR  - https://scindeks.ceon.rs/Article.aspx?artid=0040-21762305607J
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7112
AB  - The process of assembling micro components requires careful planning where precise and reliable data
collecting is necessary due to a short production cycle time. After determining the shortages of the
current data monitoring system, in this paper, by using the „Improve“ and „Control“ phases of DMAIC
cycle, the development and later testing of a new tool for automatic capture and analysis of data obtained
from the machine was done. SWOT analysis was used to establish the production site's and current
manufacturing execution system strengths and weaknesses, opportunities and threats, which were then
utilized to create the newly developed solution accurate and feasible. A tool calibration data was
obtained on 9 machines in automotive company's micro component assembly unit. To confirm the
accuracy of the data, a RunAtRate test was done on the machines, and by using hypothesis testing, the
initial reliability of the new solution was determined. Further testing and comparison revealed that the
newly proposed tool recorded 73-80% greater downtime and 40-50% more defective parts than the
previously installed system. Accordingly, the usefulness of the proposed Lean Six Sigma tool is
confirmed, and for periodic accuracy checks and further improve.ment, it is necessary to apply the PDCA
cycle.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - „Improve“ and „Control“ Tools in Assembly of Micro Components: A Case Study
EP  - 613
IS  - 5
SP  - 607
VL  - 78
DO  - 10.5937/tehnika2305607J
ER  - 

@article{
author = "Janev, Nemanja and Spasojević Brkić, Vesna and Misita, Mirjana and Perišić, Martina and Papić, Neda",
year = "2023",
abstract = "The process of assembling micro components requires careful planning where precise and reliable data
collecting is necessary due to a short production cycle time. After determining the shortages of the
current data monitoring system, in this paper, by using the „Improve“ and „Control“ phases of DMAIC
cycle, the development and later testing of a new tool for automatic capture and analysis of data obtained
from the machine was done. SWOT analysis was used to establish the production site's and current
manufacturing execution system strengths and weaknesses, opportunities and threats, which were then
utilized to create the newly developed solution accurate and feasible. A tool calibration data was
obtained on 9 machines in automotive company's micro component assembly unit. To confirm the
accuracy of the data, a RunAtRate test was done on the machines, and by using hypothesis testing, the
initial reliability of the new solution was determined. Further testing and comparison revealed that the
newly proposed tool recorded 73-80% greater downtime and 40-50% more defective parts than the
previously installed system. Accordingly, the usefulness of the proposed Lean Six Sigma tool is
confirmed, and for periodic accuracy checks and further improve.ment, it is necessary to apply the PDCA
cycle.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "„Improve“ and „Control“ Tools in Assembly of Micro Components: A Case Study",
pages = "613-607",
number = "5",
volume = "78",
doi = "10.5937/tehnika2305607J"
}

Janev, N., Spasojević Brkić, V., Misita, M., Perišić, M.,& Papić, N.. (2023). „Improve“ and „Control“ Tools in Assembly of Micro Components: A Case Study. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 78(5), 607-613.
https://doi.org/10.5937/tehnika2305607J

Janev N, Spasojević Brkić V, Misita M, Perišić M, Papić N. „Improve“ and „Control“ Tools in Assembly of Micro Components: A Case Study. in Tehnika. 2023;78(5):607-613.
doi:10.5937/tehnika2305607J .

Janev, Nemanja, Spasojević Brkić, Vesna, Misita, Mirjana, Perišić, Martina, Papić, Neda, "„Improve“ and „Control“ Tools in Assembly of Micro Components: A Case Study" in Tehnika, 78, no. 5 (2023):607-613,
https://doi.org/10.5937/tehnika2305607J . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Perišić, Martina
AU  - Brkić, Aleksandar
AU  - Veljković, Zorica
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4111
AB  - Heavy mobile machinery cabs and their equipment are still not well adjusted to operators, so it is not surprising that we are still witnessing huge consequences of accidents at sites where they operate. The checklist with 39 questions, based on the previous research, is formed, and its’ measurement structure has been tested on the sample of 102 transport, construction, and mining machines, including cranes, excavators, bucket wheel excavators, bulldozers, loaders, graders, backhoe loaders, trenchers, dump trucks, and scrapers by correlation analysis, Cronbach’s alpha, Spearman-Brown and Kendall’s W coefficient, exploratory factor analysis, and confirmatory factor analysis. The results validate the measurement structure of a checklist with only 17 items and five constructs. The results show that special attention should be put to the design of armrests and working conditions/exhaust gases, which are negatively correlated to cab interior space and task visibility. All other correlations between seat characteristics, the characteristics of armrests, whole-body vibration influences, reaching commands, the characteristics of cab interior space and environments, and interpersonal relationships are positive, which means that improvements to one area lead to improvements in another. Accordingly, the proposed model should be used for the fast, efficient, and cost-effective evaluation of ergonomics risks and as a guideline for further cab design improvements.
PB  - MDPI
T2  - Mathematics
T1  - Validating Measurement Structure of Checklist for Evaluating Ergonomics Risks in Heavy Mobile Machinery Cabs
IS  - 1
SP  - 23
VL  - 11
DO  - 10.3390/math11010023
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Misita, Mirjana and Perišić, Martina and Brkić, Aleksandar and Veljković, Zorica",
year = "2023",
abstract = "Heavy mobile machinery cabs and their equipment are still not well adjusted to operators, so it is not surprising that we are still witnessing huge consequences of accidents at sites where they operate. The checklist with 39 questions, based on the previous research, is formed, and its’ measurement structure has been tested on the sample of 102 transport, construction, and mining machines, including cranes, excavators, bucket wheel excavators, bulldozers, loaders, graders, backhoe loaders, trenchers, dump trucks, and scrapers by correlation analysis, Cronbach’s alpha, Spearman-Brown and Kendall’s W coefficient, exploratory factor analysis, and confirmatory factor analysis. The results validate the measurement structure of a checklist with only 17 items and five constructs. The results show that special attention should be put to the design of armrests and working conditions/exhaust gases, which are negatively correlated to cab interior space and task visibility. All other correlations between seat characteristics, the characteristics of armrests, whole-body vibration influences, reaching commands, the characteristics of cab interior space and environments, and interpersonal relationships are positive, which means that improvements to one area lead to improvements in another. Accordingly, the proposed model should be used for the fast, efficient, and cost-effective evaluation of ergonomics risks and as a guideline for further cab design improvements.",
publisher = "MDPI",
journal = "Mathematics",
title = "Validating Measurement Structure of Checklist for Evaluating Ergonomics Risks in Heavy Mobile Machinery Cabs",
number = "1",
pages = "23",
volume = "11",
doi = "10.3390/math11010023"
}

Spasojević Brkić, V., Misita, M., Perišić, M., Brkić, A.,& Veljković, Z.. (2023). Validating Measurement Structure of Checklist for Evaluating Ergonomics Risks in Heavy Mobile Machinery Cabs. in Mathematics
MDPI., 11(1), 23.
https://doi.org/10.3390/math11010023

Spasojević Brkić V, Misita M, Perišić M, Brkić A, Veljković Z. Validating Measurement Structure of Checklist for Evaluating Ergonomics Risks in Heavy Mobile Machinery Cabs. in Mathematics. 2023;11(1):23.
doi:10.3390/math11010023 .

Spasojević Brkić, Vesna, Misita, Mirjana, Perišić, Martina, Brkić, Aleksandar, Veljković, Zorica, "Validating Measurement Structure of Checklist for Evaluating Ergonomics Risks in Heavy Mobile Machinery Cabs" in Mathematics, 11, no. 1 (2023):23,
https://doi.org/10.3390/math11010023 . .

TY  - CONF
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Brkić, Aleksandar
AU  - Perišić, Martina
AU  - Papić, Neda
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6923
AB  - The paper presents the methodology of identification and
analysis of stoppages in mining machinery. Methodological steps are aimed at
isolating stoppages grouped by type of cause and summarized according to
criteria: frequency of occurrence and down time in minutes. In addition to the set
criteria, the paper also took into account the human factor, i.e. the operators of the
observed mining machines. Mining machinery operators` attitudes were surveyed
through a questionnaire covering several areas of occupational safety and health.
The experimental part of the research included 13 mining machines, and then, on
the example of a wheel loader, the key causes of down time were identified and the
attitudes of the operators of this machine were analyzed in terms of aspects of
occupational safety and health, because this mining machine had the longest down
time in the sample. In the final deliberations, it was concluded that the
organizational environment affects reduced safety and health at work, that is, that
the accelerated work rhythm leads to negligent use of the machine and absence
from safety procedures. Finally, research indicates that by work planning and
organizing that does not impose an accelerated work rhythm, safety and health at
work can be significantly improved.
PB  - DQM Research Center
C3  - 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings
T1  - Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader
EP  - 106
SP  - 97
VL  - 14
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6923
ER  - 

@conference{
author = "Misita, Mirjana and Spasojević Brkić, Vesna and Brkić, Aleksandar and Perišić, Martina and Papić, Neda",
year = "2023",
abstract = "The paper presents the methodology of identification and
analysis of stoppages in mining machinery. Methodological steps are aimed at
isolating stoppages grouped by type of cause and summarized according to
criteria: frequency of occurrence and down time in minutes. In addition to the set
criteria, the paper also took into account the human factor, i.e. the operators of the
observed mining machines. Mining machinery operators` attitudes were surveyed
through a questionnaire covering several areas of occupational safety and health.
The experimental part of the research included 13 mining machines, and then, on
the example of a wheel loader, the key causes of down time were identified and the
attitudes of the operators of this machine were analyzed in terms of aspects of
occupational safety and health, because this mining machine had the longest down
time in the sample. In the final deliberations, it was concluded that the
organizational environment affects reduced safety and health at work, that is, that
the accelerated work rhythm leads to negligent use of the machine and absence
from safety procedures. Finally, research indicates that by work planning and
organizing that does not impose an accelerated work rhythm, safety and health at
work can be significantly improved.",
publisher = "DQM Research Center",
journal = "14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings",
title = "Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader",
pages = "106-97",
volume = "14",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6923"
}

Misita, M., Spasojević Brkić, V., Brkić, A., Perišić, M.,& Papić, N.. (2023). Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader. in 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings
DQM Research Center., 14, 97-106.
https://hdl.handle.net/21.15107/rcub_machinery_6923

Misita M, Spasojević Brkić V, Brkić A, Perišić M, Papić N. Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader. in 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings. 2023;14:97-106.
https://hdl.handle.net/21.15107/rcub_machinery_6923 .

Misita, Mirjana, Spasojević Brkić, Vesna, Brkić, Aleksandar, Perišić, Martina, Papić, Neda, "Mining Machinery Downtimes and Operators' Attitudes on Safety and Health at Work: Example of Wheel Loader" in 14th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2023: Proceedings, 14 (2023):97-106,
https://hdl.handle.net/21.15107/rcub_machinery_6923 .

TY  - CONF
AU  - Spasojević Brkić, Vesna
AU  - Brkić, Aleksandar
AU  - Perišić, Martina
AU  - Misita, Mirjana
AU  - Janev, Nemanja
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6864
AB  - Risk management of engineering systems is of vital importance, but very often there
is no enough data to quantitatively evaluate risk and accordingly create risk management
strategy. Proper maintenance of excavators and bulldozers maximizes fuel efficiency and
reduces operating costs, as well as reduces equipment failure and enhances safety. Accordingly,
previous research opens avenue to analyze these two machinery types when working in mining
industry. This paper aims to create statistical comparisons on data collected about excavators’
and bulldozers’ as technological failure/stoppage, electrical failure/stoppage, mechanical
failure/stoppage, misuse, organizational failure/stoppage and external cause of
failure/stoppage. After performing descriptive statistics, hypothesis testing has not found
significant differences between technological failures/stoppages of excavators vs. bulldozers,
mechanical failures/stoppages between already mentioned machines or theirs hazard degrees
or total downtimes. Further research focus should be directed to the sample enlargement and
further analysis, which is expected to prove preliminary results.
PB  - Bor : University of Belgrade, Technical Faculty, Department of Engineering Management
C3  - International May Conference on Strategic Management – IMCSM23 May, 2023, Bor, Serbia
T1  - EXCAVATOR’S AND BULLDOZER’S DOWNTIME COMPARISON AND RISK MANAGEMENT: PRELIMINARY STUDY
EP  - 308
IS  - 1
SP  - 301
VL  - 19
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6864
ER  - 

@conference{
author = "Spasojević Brkić, Vesna and Brkić, Aleksandar and Perišić, Martina and Misita, Mirjana and Janev, Nemanja",
year = "2023",
abstract = "Risk management of engineering systems is of vital importance, but very often there
is no enough data to quantitatively evaluate risk and accordingly create risk management
strategy. Proper maintenance of excavators and bulldozers maximizes fuel efficiency and
reduces operating costs, as well as reduces equipment failure and enhances safety. Accordingly,
previous research opens avenue to analyze these two machinery types when working in mining
industry. This paper aims to create statistical comparisons on data collected about excavators’
and bulldozers’ as technological failure/stoppage, electrical failure/stoppage, mechanical
failure/stoppage, misuse, organizational failure/stoppage and external cause of
failure/stoppage. After performing descriptive statistics, hypothesis testing has not found
significant differences between technological failures/stoppages of excavators vs. bulldozers,
mechanical failures/stoppages between already mentioned machines or theirs hazard degrees
or total downtimes. Further research focus should be directed to the sample enlargement and
further analysis, which is expected to prove preliminary results.",
publisher = "Bor : University of Belgrade, Technical Faculty, Department of Engineering Management",
journal = "International May Conference on Strategic Management – IMCSM23 May, 2023, Bor, Serbia",
title = "EXCAVATOR’S AND BULLDOZER’S DOWNTIME COMPARISON AND RISK MANAGEMENT: PRELIMINARY STUDY",
pages = "308-301",
number = "1",
volume = "19",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6864"
}

Spasojević Brkić, V., Brkić, A., Perišić, M., Misita, M.,& Janev, N.. (2023). EXCAVATOR’S AND BULLDOZER’S DOWNTIME COMPARISON AND RISK MANAGEMENT: PRELIMINARY STUDY. in International May Conference on Strategic Management – IMCSM23 May, 2023, Bor, Serbia
Bor : University of Belgrade, Technical Faculty, Department of Engineering Management., 19(1), 301-308.
https://hdl.handle.net/21.15107/rcub_machinery_6864

Spasojević Brkić V, Brkić A, Perišić M, Misita M, Janev N. EXCAVATOR’S AND BULLDOZER’S DOWNTIME COMPARISON AND RISK MANAGEMENT: PRELIMINARY STUDY. in International May Conference on Strategic Management – IMCSM23 May, 2023, Bor, Serbia. 2023;19(1):301-308.
https://hdl.handle.net/21.15107/rcub_machinery_6864 .

Spasojević Brkić, Vesna, Brkić, Aleksandar, Perišić, Martina, Misita, Mirjana, Janev, Nemanja, "EXCAVATOR’S AND BULLDOZER’S DOWNTIME COMPARISON AND RISK MANAGEMENT: PRELIMINARY STUDY" in International May Conference on Strategic Management – IMCSM23 May, 2023, Bor, Serbia, 19, no. 1 (2023):301-308,
https://hdl.handle.net/21.15107/rcub_machinery_6864 .

TY  - CONF
AU  - Perišić, Martina
AU  - Spasojević Brkić, Vesna
AU  - Papić, Neda
AU  - Misita, Mirjana
AU  - Mihajlović, Ivan
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6871
AB  - Mining industry has a vital role in economy every country. That is the reason why is necessary to detect, remove or mitigate and prevent risk failures of mining machinery. In order to achieve that the first step is to identify and compare downtimes/failures and estimated risks. In this paper it
was conducted the preliminary research that included 348 mining machines divided in 7 different types. The aim of the research was to determinate is there statistically significant difference between different types of mining machines in two criteria: level of danger of consequences of downtime/failure and estimated failure risk by using Kruskal - Wallis H Test. The results indicate
that when it comes to level of danger of consequences there is no statistically proof that there is difference between different types of the machines. In case of estimated failure risk, there is statistically significance between some types of mining machines.
PB  - Fakultet za menadzment Zaječar / Faculty of Megatrend Zajecar
C3  - BOOK OF PROCEEDINGS OF THE VI INTERNATIONAL SCIENTIFIC CONFERENCE REGIONAL DEVELOPMENT AND CROSS-BORDER COOPERATION
T1  - MINING MACHINES' DOWNTIME/FAILURE LEVEL OF DANGER OF CONSEQUENCES AND ESTIMATED RISK OF FAILURE – PRELIMINARY RESEARCH
EP  - 97
SP  - 89
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6871
ER  - 

@conference{
author = "Perišić, Martina and Spasojević Brkić, Vesna and Papić, Neda and Misita, Mirjana and Mihajlović, Ivan",
year = "2023",
abstract = "Mining industry has a vital role in economy every country. That is the reason why is necessary to detect, remove or mitigate and prevent risk failures of mining machinery. In order to achieve that the first step is to identify and compare downtimes/failures and estimated risks. In this paper it
was conducted the preliminary research that included 348 mining machines divided in 7 different types. The aim of the research was to determinate is there statistically significant difference between different types of mining machines in two criteria: level of danger of consequences of downtime/failure and estimated failure risk by using Kruskal - Wallis H Test. The results indicate
that when it comes to level of danger of consequences there is no statistically proof that there is difference between different types of the machines. In case of estimated failure risk, there is statistically significance between some types of mining machines.",
publisher = "Fakultet za menadzment Zaječar / Faculty of Megatrend Zajecar",
journal = "BOOK OF PROCEEDINGS OF THE VI INTERNATIONAL SCIENTIFIC CONFERENCE REGIONAL DEVELOPMENT AND CROSS-BORDER COOPERATION",
title = "MINING MACHINES' DOWNTIME/FAILURE LEVEL OF DANGER OF CONSEQUENCES AND ESTIMATED RISK OF FAILURE – PRELIMINARY RESEARCH",
pages = "97-89",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6871"
}

Perišić, M., Spasojević Brkić, V., Papić, N., Misita, M.,& Mihajlović, I.. (2023). MINING MACHINES' DOWNTIME/FAILURE LEVEL OF DANGER OF CONSEQUENCES AND ESTIMATED RISK OF FAILURE – PRELIMINARY RESEARCH. in BOOK OF PROCEEDINGS OF THE VI INTERNATIONAL SCIENTIFIC CONFERENCE REGIONAL DEVELOPMENT AND CROSS-BORDER COOPERATION
Fakultet za menadzment Zaječar / Faculty of Megatrend Zajecar., 89-97.
https://hdl.handle.net/21.15107/rcub_machinery_6871

Perišić M, Spasojević Brkić V, Papić N, Misita M, Mihajlović I. MINING MACHINES' DOWNTIME/FAILURE LEVEL OF DANGER OF CONSEQUENCES AND ESTIMATED RISK OF FAILURE – PRELIMINARY RESEARCH. in BOOK OF PROCEEDINGS OF THE VI INTERNATIONAL SCIENTIFIC CONFERENCE REGIONAL DEVELOPMENT AND CROSS-BORDER COOPERATION. 2023;:89-97.
https://hdl.handle.net/21.15107/rcub_machinery_6871 .

Perišić, Martina, Spasojević Brkić, Vesna, Papić, Neda, Misita, Mirjana, Mihajlović, Ivan, "MINING MACHINES' DOWNTIME/FAILURE LEVEL OF DANGER OF CONSEQUENCES AND ESTIMATED RISK OF FAILURE – PRELIMINARY RESEARCH" in BOOK OF PROCEEDINGS OF THE VI INTERNATIONAL SCIENTIFIC CONFERENCE REGIONAL DEVELOPMENT AND CROSS-BORDER COOPERATION (2023):89-97,
https://hdl.handle.net/21.15107/rcub_machinery_6871 .

TY  - JOUR
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Rakonjac, Ivan
AU  - Damjanović, Milanko
AU  - Perišić, Martina
AU  - Papić, Neda
AU  - Đurić, Goran
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4189
AB  - U radu je prikazan model analize rizika rada dampera sa ciljem da se utvrdi najčešći razlog
neplaniranih zastoja kao i da se nakon klasifikacije zastoja po sistemima izvrši njihova ocena sa aspekta
rizika. Postavljeni kriterijumi za analizu rizika su: vreme provedeno u zastoju, frekvencija zastoja i nivo
opasnosti. Rezultati istraživanja ukazali su na uzročnike visokog rizika na posmatranim mašinama, na
osnovu kojih se mogu definisati prioritetne mere preventivnog održavanja u cilju smanjenja rizika.
Nadalje, u istraživanju prevencije rizika rada transportnih i rudarskih mašina razvijen je onlajn
kontekstualni i adaptivni ekspertni sistem HAMRISK i izvršeno ispitivanje prednosti i nedostataka
razvijenog softverskog rešenja u praksi.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Model analize rada dampera i ekspertni sistem HAMRISK
EP  - 624
IS  - 5
IS  - 5
SP  - 617
VL  - 77
DO  - 10.5937/tehnika2205617M
ER  - 

@article{
author = "Misita, Mirjana and Spasojević Brkić, Vesna and Rakonjac, Ivan and Damjanović, Milanko and Perišić, Martina and Papić, Neda and Đurić, Goran",
year = "2022",
abstract = "U radu je prikazan model analize rizika rada dampera sa ciljem da se utvrdi najčešći razlog
neplaniranih zastoja kao i da se nakon klasifikacije zastoja po sistemima izvrši njihova ocena sa aspekta
rizika. Postavljeni kriterijumi za analizu rizika su: vreme provedeno u zastoju, frekvencija zastoja i nivo
opasnosti. Rezultati istraživanja ukazali su na uzročnike visokog rizika na posmatranim mašinama, na
osnovu kojih se mogu definisati prioritetne mere preventivnog održavanja u cilju smanjenja rizika.
Nadalje, u istraživanju prevencije rizika rada transportnih i rudarskih mašina razvijen je onlajn
kontekstualni i adaptivni ekspertni sistem HAMRISK i izvršeno ispitivanje prednosti i nedostataka
razvijenog softverskog rešenja u praksi.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Model analize rada dampera i ekspertni sistem HAMRISK",
pages = "624-617",
number = "5, 5",
volume = "77",
doi = "10.5937/tehnika2205617M"
}

Misita, M., Spasojević Brkić, V., Rakonjac, I., Damjanović, M., Perišić, M., Papić, N.,& Đurić, G.. (2022). Model analize rada dampera i ekspertni sistem HAMRISK. in Tehnika
Beograd : Savez inženjera i tehničara Srbije., 77(5), 617-624.
https://doi.org/10.5937/tehnika2205617M

Misita M, Spasojević Brkić V, Rakonjac I, Damjanović M, Perišić M, Papić N, Đurić G. Model analize rada dampera i ekspertni sistem HAMRISK. in Tehnika. 2022;77(5):617-624.
doi:10.5937/tehnika2205617M .

Misita, Mirjana, Spasojević Brkić, Vesna, Rakonjac, Ivan, Damjanović, Milanko, Perišić, Martina, Papić, Neda, Đurić, Goran, "Model analize rada dampera i ekspertni sistem HAMRISK" in Tehnika, 77, no. 5 (2022):617-624,
https://doi.org/10.5937/tehnika2205617M . .

TY  - CONF
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Damjanović, Milanko
AU  - Đurić, Goran
AU  - Papić, Neda
AU  - Perišić, Martina
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4182
AB  - Previous research points to the need for the development of a decision-making system in the field of adaptive and contextual risk management of operation and maintenance of transport and mining machines, which ensures the optimal choice of maintenance strategy and consequently greater safety and health at work, reduction of direct and indirect costs of incidents, better planning and greater productivity. Accordingly, this research work refers to the analysis of data obtained by surveying respondents - users of the HAMRISK expert system for risk prevention in transport and mining machines (cranes, excavators, bulldozers, excavators, loaders, etc.).In order to analyze data, a hierarchical structure of criteria with defined importance coefficients was generated. The model of the hierarchical structure of survey questions, taken into account with the estimated coefficients of importance, ensured a unique decision-making model. The structural hierarchical model of decision-making gives a more detailed insight into the analysis of the survey questionnaires for the assessment of the HAMRSIK expert system for risk prevention in transport and mining machines, and presented directions for further development and improvement of the first variant of the software solution. The obtained results were also used in order to design marketing activities for the promotion of the HAMRISK expert system.
PB  - University of Belgrade Faculty of Mechanical Engineering
C3  - 8th International Conference on Industrial Engineering (SIE 2022)
T1  - Evaluation of the HAMRISK Expert System by Hierarchical Structuring of Criteria
SP  - 222
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4182
ER  - 

@conference{
author = "Misita, Mirjana and Spasojević Brkić, Vesna and Damjanović, Milanko and Đurić, Goran and Papić, Neda and Perišić, Martina",
year = "2022",
abstract = "Previous research points to the need for the development of a decision-making system in the field of adaptive and contextual risk management of operation and maintenance of transport and mining machines, which ensures the optimal choice of maintenance strategy and consequently greater safety and health at work, reduction of direct and indirect costs of incidents, better planning and greater productivity. Accordingly, this research work refers to the analysis of data obtained by surveying respondents - users of the HAMRISK expert system for risk prevention in transport and mining machines (cranes, excavators, bulldozers, excavators, loaders, etc.).In order to analyze data, a hierarchical structure of criteria with defined importance coefficients was generated. The model of the hierarchical structure of survey questions, taken into account with the estimated coefficients of importance, ensured a unique decision-making model. The structural hierarchical model of decision-making gives a more detailed insight into the analysis of the survey questionnaires for the assessment of the HAMRSIK expert system for risk prevention in transport and mining machines, and presented directions for further development and improvement of the first variant of the software solution. The obtained results were also used in order to design marketing activities for the promotion of the HAMRISK expert system.",
publisher = "University of Belgrade Faculty of Mechanical Engineering",
journal = "8th International Conference on Industrial Engineering (SIE 2022)",
title = "Evaluation of the HAMRISK Expert System by Hierarchical Structuring of Criteria",
pages = "222",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4182"
}

Misita, M., Spasojević Brkić, V., Damjanović, M., Đurić, G., Papić, N.,& Perišić, M.. (2022). Evaluation of the HAMRISK Expert System by Hierarchical Structuring of Criteria. in 8th International Conference on Industrial Engineering (SIE 2022)
University of Belgrade Faculty of Mechanical Engineering., 222.
https://hdl.handle.net/21.15107/rcub_machinery_4182

Misita M, Spasojević Brkić V, Damjanović M, Đurić G, Papić N, Perišić M. Evaluation of the HAMRISK Expert System by Hierarchical Structuring of Criteria. in 8th International Conference on Industrial Engineering (SIE 2022). 2022;:222.
https://hdl.handle.net/21.15107/rcub_machinery_4182 .

Misita, Mirjana, Spasojević Brkić, Vesna, Damjanović, Milanko, Đurić, Goran, Papić, Neda, Perišić, Martina, "Evaluation of the HAMRISK Expert System by Hierarchical Structuring of Criteria" in 8th International Conference on Industrial Engineering (SIE 2022) (2022):222,
https://hdl.handle.net/21.15107/rcub_machinery_4182 .

TY  - JOUR
AU  - Lukić, Jelena
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Borota-Tišma, Ankica
AU  - Janković, Aleksandra
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4062
AB  - The aim of the paper is to determine the risk level of a contract extension with the existing policyholders, which is further propagated to the business effectiveness and long-term sustainability of the company. The uncertainties in the relative importance of risk factors, their values, and risk levels are described by the linguistic forms, which are modeled by using the fuzzy sets theory. The evaluations of the relative importance of risk factors are stated as a fuzzy group decision-making problem. The weights of risk factors are obtained by using a fuzzy analytic hierarchy process. The determination of production rules for the assessment of the risk level is based on fuzzy IF-THAN rules. The verification of the model is performed by using real-life data originating from the insurance company which operates in the Republic of Serbia.
PB  - MDPI
T2  - Mathematics
T1  - Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector
DO  - 10.3390/math10183268
ER  - 

@article{
author = "Lukić, Jelena and Misita, Mirjana and Milanović, Dragan and Borota-Tišma, Ankica and Janković, Aleksandra",
year = "2022",
abstract = "The aim of the paper is to determine the risk level of a contract extension with the existing policyholders, which is further propagated to the business effectiveness and long-term sustainability of the company. The uncertainties in the relative importance of risk factors, their values, and risk levels are described by the linguistic forms, which are modeled by using the fuzzy sets theory. The evaluations of the relative importance of risk factors are stated as a fuzzy group decision-making problem. The weights of risk factors are obtained by using a fuzzy analytic hierarchy process. The determination of production rules for the assessment of the risk level is based on fuzzy IF-THAN rules. The verification of the model is performed by using real-life data originating from the insurance company which operates in the Republic of Serbia.",
publisher = "MDPI",
journal = "Mathematics",
title = "Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector",
doi = "10.3390/math10183268"
}

Lukić, J., Misita, M., Milanović, D., Borota-Tišma, A.,& Janković, A.. (2022). Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector. in Mathematics
MDPI..
https://doi.org/10.3390/math10183268

Lukić J, Misita M, Milanović D, Borota-Tišma A, Janković A. Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector. in Mathematics. 2022;.
doi:10.3390/math10183268 .

Lukić, Jelena, Misita, Mirjana, Milanović, Dragan, Borota-Tišma, Ankica, Janković, Aleksandra, "Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector" in Mathematics (2022),
https://doi.org/10.3390/math10183268 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Veljković, Zorica
AU  - Brkić, Aleksandar
AU  - Misita, Mirjana
AU  - Perišić, Martina
AU  - Papić, Neda
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4108
AB  - As industrial systems represent a complex socio-technical system, it is necessary to analyse the impact of manager-operator-machine interaction on industrial safety, as categories of contextual factors. However, modern scientific literature indicates insufficient research on this topic. This paper has an aim to empirically analyse behavioural style and transport and mining machines operators’ attitudes in the safety climate context. Participants in this study were 28 crane’s and 65 mining machinery’s (excavators, bucket wheel excavators, bulldozers, loaders, graders, backhoe loaders, trenchers, dump trucks and scrapers) operators working in Serbian industrial companies. In the first step there is conducted descriptive statistics and followed by Kolmogorov’s and U* Mann-Whitney test to examine differences. Obtained results have shown that there were not statistically significant differences both between attitudes of operators on those two kinds of machines, namely, there are no statistically significant differences in terms of absenteeism due to poor working conditions, atmosphere of cooperation and togetherness among operators and the ways in which managers motivate and reward them. Between numbers of injuries at work happened by both machines’ types used there are no statistical differences, too. Also, further factor analysis has shown that examined operators’ and machines’ characteristics divide into two factors – one is focused to anthropometric characteristics presented by height and weight while another is focused on age of operator and machine and operator’s experience. It is recommended, in future research to enlarge sample, repeat statistical testing and analyse wider set of variables on examined matters in aim to discover pattern of anthropometric factors influence on behavioural factors.
PB  - Belgrade : Institute for research and design in Industry
T2  - Journal of Applied Engineering Science
T1  - Transport and mining machines operators’ behavioral attitudes in safety climate context
EP  - 1202
IS  - 4
SP  - 1196
VL  - 20
DO  - 10.5937/jaes0-37669
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Veljković, Zorica and Brkić, Aleksandar and Misita, Mirjana and Perišić, Martina and Papić, Neda",
year = "2022",
abstract = "As industrial systems represent a complex socio-technical system, it is necessary to analyse the impact of manager-operator-machine interaction on industrial safety, as categories of contextual factors. However, modern scientific literature indicates insufficient research on this topic. This paper has an aim to empirically analyse behavioural style and transport and mining machines operators’ attitudes in the safety climate context. Participants in this study were 28 crane’s and 65 mining machinery’s (excavators, bucket wheel excavators, bulldozers, loaders, graders, backhoe loaders, trenchers, dump trucks and scrapers) operators working in Serbian industrial companies. In the first step there is conducted descriptive statistics and followed by Kolmogorov’s and U* Mann-Whitney test to examine differences. Obtained results have shown that there were not statistically significant differences both between attitudes of operators on those two kinds of machines, namely, there are no statistically significant differences in terms of absenteeism due to poor working conditions, atmosphere of cooperation and togetherness among operators and the ways in which managers motivate and reward them. Between numbers of injuries at work happened by both machines’ types used there are no statistical differences, too. Also, further factor analysis has shown that examined operators’ and machines’ characteristics divide into two factors – one is focused to anthropometric characteristics presented by height and weight while another is focused on age of operator and machine and operator’s experience. It is recommended, in future research to enlarge sample, repeat statistical testing and analyse wider set of variables on examined matters in aim to discover pattern of anthropometric factors influence on behavioural factors.",
publisher = "Belgrade : Institute for research and design in Industry",
journal = "Journal of Applied Engineering Science",
title = "Transport and mining machines operators’ behavioral attitudes in safety climate context",
pages = "1202-1196",
number = "4",
volume = "20",
doi = "10.5937/jaes0-37669"
}

Spasojević Brkić, V., Veljković, Z., Brkić, A., Misita, M., Perišić, M.,& Papić, N.. (2022). Transport and mining machines operators’ behavioral attitudes in safety climate context. in Journal of Applied Engineering Science
Belgrade : Institute for research and design in Industry., 20(4), 1196-1202.
https://doi.org/10.5937/jaes0-37669

Spasojević Brkić V, Veljković Z, Brkić A, Misita M, Perišić M, Papić N. Transport and mining machines operators’ behavioral attitudes in safety climate context. in Journal of Applied Engineering Science. 2022;20(4):1196-1202.
doi:10.5937/jaes0-37669 .

Spasojević Brkić, Vesna, Veljković, Zorica, Brkić, Aleksandar, Misita, Mirjana, Perišić, Martina, Papić, Neda, "Transport and mining machines operators’ behavioral attitudes in safety climate context" in Journal of Applied Engineering Science, 20, no. 4 (2022):1196-1202,
https://doi.org/10.5937/jaes0-37669 . .

TY  - CONF
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Brkić, Aleksandar
AU  - Veljković, Zorica
AU  - Perišić, Martina
AU  - Papić, Neda
AU  - Al Sharif, Abdulghder Mohamed
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4192
AB  - Although the biggest advancements could be expected from the mining industry as the
oldest one, it is still a major source of air pollution, there are more people hurt or injured than in
any other industry, while social conflicts around it are worldwide spread. The reason for the lack
of expected progress in the area is the most likely the fact that current research streams vary
barely focus to human and organizational factors, but technology-centered design dominates,
while risk management analysis are rarely applied. The probable reason is proper record keeping.
The aim of this paper is to present the data collected on downtimes of backhoe loaders, to propose
the methodology to be applied and show and analyze results obtained on its down time analysis
and risk management. This research analyzed the structure of downtime and consequences during
a period of one year of two backhoe loader working in mining site in Serbia. Downtimes were
classified as technological downtime, power / electricity downtime, mechanical downtime, misuse
due to abuse, organizational downtime and downtime due to external influences. In this research,
the frequencies of downtime were monitored by the stated categories of downtime. The
consequences of the identified delays were then assessed, and the risk calculated. By analyzing
the types of downtime by systems, it was determined that the priority action measures in order to
mitigate the risk of specific construction machines should be aimed at protecting workers during
technological operations of installing turbines, rear arms and the like. Although mechanical
downtime had the largest share in the risk calculation, the risk map for specific machines clearly
indicates that the technological procedures of assembly and disassembly are the most critical in
terms of risk.
PB  - Bor : University of Belgrade, Technical Faculty, Management Department
C3  - International May Conference on Strategic Management – IMCSM22
T1  - Risk Assessment of Backhoe Loader Downtimes
EP  - 286
IS  - 1
SP  - 278
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4192
ER  - 

@conference{
author = "Misita, Mirjana and Spasojević Brkić, Vesna and Brkić, Aleksandar and Veljković, Zorica and Perišić, Martina and Papić, Neda and Al Sharif, Abdulghder Mohamed",
year = "2022",
abstract = "Although the biggest advancements could be expected from the mining industry as the
oldest one, it is still a major source of air pollution, there are more people hurt or injured than in
any other industry, while social conflicts around it are worldwide spread. The reason for the lack
of expected progress in the area is the most likely the fact that current research streams vary
barely focus to human and organizational factors, but technology-centered design dominates,
while risk management analysis are rarely applied. The probable reason is proper record keeping.
The aim of this paper is to present the data collected on downtimes of backhoe loaders, to propose
the methodology to be applied and show and analyze results obtained on its down time analysis
and risk management. This research analyzed the structure of downtime and consequences during
a period of one year of two backhoe loader working in mining site in Serbia. Downtimes were
classified as technological downtime, power / electricity downtime, mechanical downtime, misuse
due to abuse, organizational downtime and downtime due to external influences. In this research,
the frequencies of downtime were monitored by the stated categories of downtime. The
consequences of the identified delays were then assessed, and the risk calculated. By analyzing
the types of downtime by systems, it was determined that the priority action measures in order to
mitigate the risk of specific construction machines should be aimed at protecting workers during
technological operations of installing turbines, rear arms and the like. Although mechanical
downtime had the largest share in the risk calculation, the risk map for specific machines clearly
indicates that the technological procedures of assembly and disassembly are the most critical in
terms of risk.",
publisher = "Bor : University of Belgrade, Technical Faculty, Management Department",
journal = "International May Conference on Strategic Management – IMCSM22",
title = "Risk Assessment of Backhoe Loader Downtimes",
pages = "286-278",
number = "1",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4192"
}

Misita, M., Spasojević Brkić, V., Brkić, A., Veljković, Z., Perišić, M., Papić, N.,& Al Sharif, A. M.. (2022). Risk Assessment of Backhoe Loader Downtimes. in International May Conference on Strategic Management – IMCSM22
Bor : University of Belgrade, Technical Faculty, Management Department., 18(1), 278-286.
https://hdl.handle.net/21.15107/rcub_machinery_4192

Misita M, Spasojević Brkić V, Brkić A, Veljković Z, Perišić M, Papić N, Al Sharif AM. Risk Assessment of Backhoe Loader Downtimes. in International May Conference on Strategic Management – IMCSM22. 2022;18(1):278-286.
https://hdl.handle.net/21.15107/rcub_machinery_4192 .

Misita, Mirjana, Spasojević Brkić, Vesna, Brkić, Aleksandar, Veljković, Zorica, Perišić, Martina, Papić, Neda, Al Sharif, Abdulghder Mohamed, "Risk Assessment of Backhoe Loader Downtimes" in International May Conference on Strategic Management – IMCSM22, 18, no. 1 (2022):278-286,
https://hdl.handle.net/21.15107/rcub_machinery_4192 .

TY  - CONF
AU  - Perišić, Martina
AU  - Papić, Neda
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Janev, Nemanja
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4188
AB  - Mining is considered one of the most risky industrial operations. Development and application of risk assessment methods has the greatest impact on improvements in terms of safety in mining equipment. Risk is analyzed in many aspects i.e. human factor, environmental impact and operational aspects. Analyzing the mining machinery is a way to determine which ones have the greatest tendency to fail. The aim of this research is to compare data on failures obtained from 348 mining machines. All machines are arranged in 7 groups, namely 50 excavators, 50 bulldozers, 48 drills, 50 dumpers, 50 backhoe loaders, 50 bucket wheel excavators and 50 loaders. In order to compare the data, it is necessary to first determine the distribution under which the data belong. That is achieved by using Kolmogorov-Smirnov test. After that the Kruskal-Wallis test was used to determine whether there is a relationship between the machines, viewed from the aspects of failure duration and failure frequency.
PB  - Zrenjanin, Technical faculty “Mihajlo Pupin”
C3  - XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022)
T1  - Comparison of Failure Duration and Failure Frequency of Mining Machines Using The Kruskal-Wallis H Test (One-Way Anova On Ranks) - Preliminary Research
SP  - 93
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4188
ER  - 

@conference{
author = "Perišić, Martina and Papić, Neda and Misita, Mirjana and Spasojević Brkić, Vesna and Janev, Nemanja",
year = "2022",
abstract = "Mining is considered one of the most risky industrial operations. Development and application of risk assessment methods has the greatest impact on improvements in terms of safety in mining equipment. Risk is analyzed in many aspects i.e. human factor, environmental impact and operational aspects. Analyzing the mining machinery is a way to determine which ones have the greatest tendency to fail. The aim of this research is to compare data on failures obtained from 348 mining machines. All machines are arranged in 7 groups, namely 50 excavators, 50 bulldozers, 48 drills, 50 dumpers, 50 backhoe loaders, 50 bucket wheel excavators and 50 loaders. In order to compare the data, it is necessary to first determine the distribution under which the data belong. That is achieved by using Kolmogorov-Smirnov test. After that the Kruskal-Wallis test was used to determine whether there is a relationship between the machines, viewed from the aspects of failure duration and failure frequency.",
publisher = "Zrenjanin, Technical faculty “Mihajlo Pupin”",
journal = "XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022)",
title = "Comparison of Failure Duration and Failure Frequency of Mining Machines Using The Kruskal-Wallis H Test (One-Way Anova On Ranks) - Preliminary Research",
pages = "93",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4188"
}

Perišić, M., Papić, N., Misita, M., Spasojević Brkić, V.,& Janev, N.. (2022). Comparison of Failure Duration and Failure Frequency of Mining Machines Using The Kruskal-Wallis H Test (One-Way Anova On Ranks) - Preliminary Research. in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022)
Zrenjanin, Technical faculty “Mihajlo Pupin”., 93.
https://hdl.handle.net/21.15107/rcub_machinery_4188

Perišić M, Papić N, Misita M, Spasojević Brkić V, Janev N. Comparison of Failure Duration and Failure Frequency of Mining Machines Using The Kruskal-Wallis H Test (One-Way Anova On Ranks) - Preliminary Research. in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022). 2022;:93.
https://hdl.handle.net/21.15107/rcub_machinery_4188 .

Perišić, Martina, Papić, Neda, Misita, Mirjana, Spasojević Brkić, Vesna, Janev, Nemanja, "Comparison of Failure Duration and Failure Frequency of Mining Machines Using The Kruskal-Wallis H Test (One-Way Anova On Ranks) - Preliminary Research" in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) (2022):93,
https://hdl.handle.net/21.15107/rcub_machinery_4188 .

TY  - CONF
AU  - Misita, Mirjana
AU  - Brkić, Aleksandar
AU  - Spasojević Brkić, Vesna
AU  - Papić, Neda
AU  - Perišić, Martina
AU  - Rakonjac, Ivan
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4180
AB  - The paper presents a case study of dump trucks work efficiency testing as well as identification, classification analysis and risk assessment. The aim of the research was to determine the most common reason for unplanned stoppages in the observed dump trucks and to evaluate them from the aspect of risk after classifying the stoppages according to dumper systems. In the research, a semi-quantitative method was used for risk assessment, considering that the set criteria, the downtime and the frequency of stoppages, were taken based on the results of measurements over a period of 18 months, while a ten-level descriptive scale was used for the criterion of the level of danger. The results of the research indicated that there are certain systems on the observed machines that are of moderate risk and for which additional preventive maintenance measures are proposed in order to reduce the risk. The research results are visually presented three-dimensionally, given that three criteria were used for risk assessment.
PB  - University of Belgrade Faculty of Mechanical Engineering
C3  - 8th International Conference on Industrial Engineering (SIE 2022)
T1  - Dump Truck Efficiency and Risk Maps: Case Study
SP  - 217
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4180
ER  - 

@conference{
author = "Misita, Mirjana and Brkić, Aleksandar and Spasojević Brkić, Vesna and Papić, Neda and Perišić, Martina and Rakonjac, Ivan",
year = "2022",
abstract = "The paper presents a case study of dump trucks work efficiency testing as well as identification, classification analysis and risk assessment. The aim of the research was to determine the most common reason for unplanned stoppages in the observed dump trucks and to evaluate them from the aspect of risk after classifying the stoppages according to dumper systems. In the research, a semi-quantitative method was used for risk assessment, considering that the set criteria, the downtime and the frequency of stoppages, were taken based on the results of measurements over a period of 18 months, while a ten-level descriptive scale was used for the criterion of the level of danger. The results of the research indicated that there are certain systems on the observed machines that are of moderate risk and for which additional preventive maintenance measures are proposed in order to reduce the risk. The research results are visually presented three-dimensionally, given that three criteria were used for risk assessment.",
publisher = "University of Belgrade Faculty of Mechanical Engineering",
journal = "8th International Conference on Industrial Engineering (SIE 2022)",
title = "Dump Truck Efficiency and Risk Maps: Case Study",
pages = "217",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4180"
}

Misita, M., Brkić, A., Spasojević Brkić, V., Papić, N., Perišić, M.,& Rakonjac, I.. (2022). Dump Truck Efficiency and Risk Maps: Case Study. in 8th International Conference on Industrial Engineering (SIE 2022)
University of Belgrade Faculty of Mechanical Engineering., 217.
https://hdl.handle.net/21.15107/rcub_machinery_4180

Misita M, Brkić A, Spasojević Brkić V, Papić N, Perišić M, Rakonjac I. Dump Truck Efficiency and Risk Maps: Case Study. in 8th International Conference on Industrial Engineering (SIE 2022). 2022;:217.
https://hdl.handle.net/21.15107/rcub_machinery_4180 .

Misita, Mirjana, Brkić, Aleksandar, Spasojević Brkić, Vesna, Papić, Neda, Perišić, Martina, Rakonjac, Ivan, "Dump Truck Efficiency and Risk Maps: Case Study" in 8th International Conference on Industrial Engineering (SIE 2022) (2022):217,
https://hdl.handle.net/21.15107/rcub_machinery_4180 .

TY  - CONF
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Brkić, Aleksandar
AU  - Veljković, Zorica
AU  - Perišić, Martina
AU  - Papić, Neda
AU  - Janev, Nemanja
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4181
AB  - Nowadays, safety and sustainable business success cannot be viewed in isolation. Risk assessment is a
prerequisite for adequate planning of prevention of destruction of critical potentials, as well as preparation of a
strategy for response to failure in the context of prevention of consequences. An important part of all
construction equipment maintenance is proper record keeping, but it is not done often in practice although it is a
prerequisite of proper risk management. Proper maintenance of excavators maximizes fuel efficiency and
reduces operating costs as well as equipment failure. The aim of this paper is to present the missing facts, to
propose the methodology to be applied and show and analyze results obtained on excavator down time analysis
and risk management. This research analyzed the structure of downtime and consequences in excavator work in
six large Serbian companies during a period of one year. Delays in the observed transport and mining machines
were classified according to the type of downtime: technological downtime, power / electricity downtime,
mechanical downtime, misuse due to abuse, organizational downtime and downtime due to external influences.
In this research, the frequencies of downtime were monitored by the stated categories of downtime. The
consequences of the identified delays were then assessed, and the risk calculated.
PB  - Zrenjanin : Technical faculty “Mihajlo Pupin”
C3  - 12th International Symposium Engineering Management and Competitiveness 2022 (EMC 2022)
T1  - Risk Management and Excavator Downtime Analysis
SP  - 98
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4181
ER  - 

@conference{
author = "Spasojević Brkić, Vesna and Misita, Mirjana and Brkić, Aleksandar and Veljković, Zorica and Perišić, Martina and Papić, Neda and Janev, Nemanja",
year = "2022",
abstract = "Nowadays, safety and sustainable business success cannot be viewed in isolation. Risk assessment is a
prerequisite for adequate planning of prevention of destruction of critical potentials, as well as preparation of a
strategy for response to failure in the context of prevention of consequences. An important part of all
construction equipment maintenance is proper record keeping, but it is not done often in practice although it is a
prerequisite of proper risk management. Proper maintenance of excavators maximizes fuel efficiency and
reduces operating costs as well as equipment failure. The aim of this paper is to present the missing facts, to
propose the methodology to be applied and show and analyze results obtained on excavator down time analysis
and risk management. This research analyzed the structure of downtime and consequences in excavator work in
six large Serbian companies during a period of one year. Delays in the observed transport and mining machines
were classified according to the type of downtime: technological downtime, power / electricity downtime,
mechanical downtime, misuse due to abuse, organizational downtime and downtime due to external influences.
In this research, the frequencies of downtime were monitored by the stated categories of downtime. The
consequences of the identified delays were then assessed, and the risk calculated.",
publisher = "Zrenjanin : Technical faculty “Mihajlo Pupin”",
journal = "12th International Symposium Engineering Management and Competitiveness 2022 (EMC 2022)",
title = "Risk Management and Excavator Downtime Analysis",
pages = "98",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4181"
}

Spasojević Brkić, V., Misita, M., Brkić, A., Veljković, Z., Perišić, M., Papić, N.,& Janev, N.. (2022). Risk Management and Excavator Downtime Analysis. in 12th International Symposium Engineering Management and Competitiveness 2022 (EMC 2022)
Zrenjanin : Technical faculty “Mihajlo Pupin”., 98.
https://hdl.handle.net/21.15107/rcub_machinery_4181

Spasojević Brkić V, Misita M, Brkić A, Veljković Z, Perišić M, Papić N, Janev N. Risk Management and Excavator Downtime Analysis. in 12th International Symposium Engineering Management and Competitiveness 2022 (EMC 2022). 2022;:98.
https://hdl.handle.net/21.15107/rcub_machinery_4181 .

Spasojević Brkić, Vesna, Misita, Mirjana, Brkić, Aleksandar, Veljković, Zorica, Perišić, Martina, Papić, Neda, Janev, Nemanja, "Risk Management and Excavator Downtime Analysis" in 12th International Symposium Engineering Management and Competitiveness 2022 (EMC 2022) (2022):98,
https://hdl.handle.net/21.15107/rcub_machinery_4181 .

TY  - CONF
AU  - Perišić, Martina
AU  - Papić, Neda
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Janev, Nemanja
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4118
AB  - Mining is considered one of the most risky industrial operations. Development and application of risk assessment methods has the greatest impact on improvements in terms of safety in mining equipment. Risk is analyzed in many aspects i.e. human factor, environmental impact and operational aspects. Analyzing the mining machinery is a way to determine which ones have the greatest tendency to fail. The aim of this research is to compare data on failures obtained from 348 mining machines. All machines are arranged in 7 groups, namely 50 excavators, 50 bulldozers, 48 drills, 50 dumpers, 50 backhoe loaders, 50 bucket wheel excavators and 50 loaders. In order to compare the data, it is necessary to first determine the distribution under which the data belong. That is achieved by using Kolmogorov-Smirnov test. After that the Kruskal-Wallis test was used to determine whether there is a relationship between the machines, viewed from the aspects of failure duration and failure frequency.
PB  - Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad
C3  - XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia
T1  - Comparison of failure duration and faailure frequency of mining machines using the Kruskal-Wallis H test (one-way ANOVA on ranks) - preliminary research
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4118
ER  - 

@conference{
author = "Perišić, Martina and Papić, Neda and Misita, Mirjana and Spasojević Brkić, Vesna and Janev, Nemanja",
year = "2022",
abstract = "Mining is considered one of the most risky industrial operations. Development and application of risk assessment methods has the greatest impact on improvements in terms of safety in mining equipment. Risk is analyzed in many aspects i.e. human factor, environmental impact and operational aspects. Analyzing the mining machinery is a way to determine which ones have the greatest tendency to fail. The aim of this research is to compare data on failures obtained from 348 mining machines. All machines are arranged in 7 groups, namely 50 excavators, 50 bulldozers, 48 drills, 50 dumpers, 50 backhoe loaders, 50 bucket wheel excavators and 50 loaders. In order to compare the data, it is necessary to first determine the distribution under which the data belong. That is achieved by using Kolmogorov-Smirnov test. After that the Kruskal-Wallis test was used to determine whether there is a relationship between the machines, viewed from the aspects of failure duration and failure frequency.",
publisher = "Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad",
journal = "XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia",
title = "Comparison of failure duration and faailure frequency of mining machines using the Kruskal-Wallis H test (one-way ANOVA on ranks) - preliminary research",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4118"
}

Perišić, M., Papić, N., Misita, M., Spasojević Brkić, V.,& Janev, N.. (2022). Comparison of failure duration and faailure frequency of mining machines using the Kruskal-Wallis H test (one-way ANOVA on ranks) - preliminary research. in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia
Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad..
https://hdl.handle.net/21.15107/rcub_machinery_4118

Perišić M, Papić N, Misita M, Spasojević Brkić V, Janev N. Comparison of failure duration and faailure frequency of mining machines using the Kruskal-Wallis H test (one-way ANOVA on ranks) - preliminary research. in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_4118 .

Perišić, Martina, Papić, Neda, Misita, Mirjana, Spasojević Brkić, Vesna, Janev, Nemanja, "Comparison of failure duration and faailure frequency of mining machines using the Kruskal-Wallis H test (one-way ANOVA on ranks) - preliminary research" in XII International Conference Industrial Engineering and Environmental Protection 2022 (IIZS 2022) October 06-07, 2022, Zrenjanin, Serbia (2022),
https://hdl.handle.net/21.15107/rcub_machinery_4118 .

TY  - CONF
AU  - Brkić, Aleksandar
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Papić, Neda
AU  - Perišić, Martina
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4126
AB  - The subject research is aimed at pointing out the methodology of identification, classification and risk analysis of mining machines. Bulldozers as heavy  mobile machines are very useful in mining processes as auxilary machines
which generate up to 20% of the total mining costs and cause numerous injections and fatalities. Till now, there have been numerous attempts to understand underlying causes of injury incidents on mining equipment, but available studies very rarely analyze and do not systematically identify, quantify and evaluate risks related to bulldozers. The risk calculation was realized by applying the semiquantitative method in risk assessment. The experimental part of the research was conducted on a mining machine, bulldozer Komatus K155AX, for which risk mapping was performed and conclusions on the most significant stoppages from the risk aspect were made. The results of the research indicated that there were no high and moderate risk stoppages in the observed machine. The most significant
stoppages were identified for danger level 6 mechanical types of stoppages. It is also significant that in the observed time period in which the work of the mining machine was recorded and monitored, no organizational stoppages or stoppages due to human factors were recorded, which indicates the efficiency of the maintenance function.
PB  - Čačak : DQM Research Center
C3  - 13th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2022 : Proceedings, june 23-24, 2022, Prijevor, Serbia
T1  - Identification and analysis of the risk of down time in the operational work of bulldozers
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4126
ER  - 

@conference{
author = "Brkić, Aleksandar and Misita, Mirjana and Spasojević Brkić, Vesna and Papić, Neda and Perišić, Martina",
year = "2022",
abstract = "The subject research is aimed at pointing out the methodology of identification, classification and risk analysis of mining machines. Bulldozers as heavy  mobile machines are very useful in mining processes as auxilary machines
which generate up to 20% of the total mining costs and cause numerous injections and fatalities. Till now, there have been numerous attempts to understand underlying causes of injury incidents on mining equipment, but available studies very rarely analyze and do not systematically identify, quantify and evaluate risks related to bulldozers. The risk calculation was realized by applying the semiquantitative method in risk assessment. The experimental part of the research was conducted on a mining machine, bulldozer Komatus K155AX, for which risk mapping was performed and conclusions on the most significant stoppages from the risk aspect were made. The results of the research indicated that there were no high and moderate risk stoppages in the observed machine. The most significant
stoppages were identified for danger level 6 mechanical types of stoppages. It is also significant that in the observed time period in which the work of the mining machine was recorded and monitored, no organizational stoppages or stoppages due to human factors were recorded, which indicates the efficiency of the maintenance function.",
publisher = "Čačak : DQM Research Center",
journal = "13th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2022 : Proceedings, june 23-24, 2022, Prijevor, Serbia",
title = "Identification and analysis of the risk of down time in the operational work of bulldozers",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4126"
}

Brkić, A., Misita, M., Spasojević Brkić, V., Papić, N.,& Perišić, M.. (2022). Identification and analysis of the risk of down time in the operational work of bulldozers. in 13th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2022 : Proceedings, june 23-24, 2022, Prijevor, Serbia
Čačak : DQM Research Center..
https://hdl.handle.net/21.15107/rcub_machinery_4126

Brkić A, Misita M, Spasojević Brkić V, Papić N, Perišić M. Identification and analysis of the risk of down time in the operational work of bulldozers. in 13th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2022 : Proceedings, june 23-24, 2022, Prijevor, Serbia. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_4126 .

Brkić, Aleksandar, Misita, Mirjana, Spasojević Brkić, Vesna, Papić, Neda, Perišić, Martina, "Identification and analysis of the risk of down time in the operational work of bulldozers" in 13th DQM International Conference Life Cycle Engineering and Management DQM-POLYTECH-2022 : Proceedings, june 23-24, 2022, Prijevor, Serbia (2022),
https://hdl.handle.net/21.15107/rcub_machinery_4126 .

TY  - CONF
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Bugarić, Uglješa
AU  - Veljković, Zorica
AU  - Vesić Pavlović, Tijana
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4156
AB  - Although Professor Vukan Dešić’s brilliance is evidently important on a global scale, unfortunately, not much has been written about his biography and contribution to the scientific field so far, and thus not much is known, as stated by Janko Cvijanović in the text “A Tribute to Professor Vukan Dešić 1906-1975” published in 2011[8]. This overview paper first aims to outline and consolidate all the biographical facts available today in libraries and archives, and then list the teaching, scientific and professional contributions made by Professor Vukan Dešić during his fruitful life. Nowadays, it is extremely important to emphasize the relevance of the pioneering contributions of Professor Dešić, because there can be no bright future without respect for the past. Bearing in mind that Professor Dešić opened up the path into a deeper understanding of the scientific organization of work, at least in the European area, as a sign of gratitude to our founder, we write this paper and dedicate the 8th International Conference of Industrial Engineering – SIE 2022 to him, pointing out especially to the following contributions of our “teacher”: 1) his contribution to the development of higher education through performing the functions of the Vice-rector, Dean and Rector at the University of Belgrade and the Faculty of Mechanical Engineering; 2) his contribution to the development of railways as the general manager of the Yugoslav State Railways and assistant to the Minister of Railways, i.e. Transport; 3) the fact that, as early as in 1949, he developed the course in Scientific Organization of Work and founded the Department for Scientific Organization of Work at the Faculty of Mechanical Engineering in Belgrade exactly 70 years ago; 4) the fact that he is responsible for the establishment of the Faculty of Transport and Traffic Engineering, an initiator of the founding of the Faculty of Organizational Sciences and the Technical College of Mechanical Engineering; 5) his contribution to the development of scientific fields as a head and/or founder of a large number of institutes and scientific associations (e.g. Centre for Multidisciplinary Studies, Yugoslav Society of Mechanics); 6) his numerous scientific and professional contributions of tremendous importance, with special emphasis on the fact that he is the founder of the contingent theory of organization, the creator of an innovative Complex Analytical Method, which seriously raised the level of organization of the Yugoslav companies at the time, the forerunner of the invention of Ishikawa, and a serious critic of Taylor’s contributions, who refuted the premises laid by Henry Town as the foundations of management and organization.
PB  - University of Belgrade Faculty of Mechanical Engineering, Belgrade
C3  - 8th International Symposium of Industrial Engineering SIE 2022 : Proceedings, 29th-30th September 2022 Belgrade, Serbia
T1  - Professor Vukan Dešić as a founder of the department for scientific organization of work : the 70-year jubilee
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4156
ER  - 

@conference{
author = "Spasojević Brkić, Vesna and Misita, Mirjana and Bugarić, Uglješa and Veljković, Zorica and Vesić Pavlović, Tijana",
year = "2022",
abstract = "Although Professor Vukan Dešić’s brilliance is evidently important on a global scale, unfortunately, not much has been written about his biography and contribution to the scientific field so far, and thus not much is known, as stated by Janko Cvijanović in the text “A Tribute to Professor Vukan Dešić 1906-1975” published in 2011[8]. This overview paper first aims to outline and consolidate all the biographical facts available today in libraries and archives, and then list the teaching, scientific and professional contributions made by Professor Vukan Dešić during his fruitful life. Nowadays, it is extremely important to emphasize the relevance of the pioneering contributions of Professor Dešić, because there can be no bright future without respect for the past. Bearing in mind that Professor Dešić opened up the path into a deeper understanding of the scientific organization of work, at least in the European area, as a sign of gratitude to our founder, we write this paper and dedicate the 8th International Conference of Industrial Engineering – SIE 2022 to him, pointing out especially to the following contributions of our “teacher”: 1) his contribution to the development of higher education through performing the functions of the Vice-rector, Dean and Rector at the University of Belgrade and the Faculty of Mechanical Engineering; 2) his contribution to the development of railways as the general manager of the Yugoslav State Railways and assistant to the Minister of Railways, i.e. Transport; 3) the fact that, as early as in 1949, he developed the course in Scientific Organization of Work and founded the Department for Scientific Organization of Work at the Faculty of Mechanical Engineering in Belgrade exactly 70 years ago; 4) the fact that he is responsible for the establishment of the Faculty of Transport and Traffic Engineering, an initiator of the founding of the Faculty of Organizational Sciences and the Technical College of Mechanical Engineering; 5) his contribution to the development of scientific fields as a head and/or founder of a large number of institutes and scientific associations (e.g. Centre for Multidisciplinary Studies, Yugoslav Society of Mechanics); 6) his numerous scientific and professional contributions of tremendous importance, with special emphasis on the fact that he is the founder of the contingent theory of organization, the creator of an innovative Complex Analytical Method, which seriously raised the level of organization of the Yugoslav companies at the time, the forerunner of the invention of Ishikawa, and a serious critic of Taylor’s contributions, who refuted the premises laid by Henry Town as the foundations of management and organization.",
publisher = "University of Belgrade Faculty of Mechanical Engineering, Belgrade",
journal = "8th International Symposium of Industrial Engineering SIE 2022 : Proceedings, 29th-30th September 2022 Belgrade, Serbia",
title = "Professor Vukan Dešić as a founder of the department for scientific organization of work : the 70-year jubilee",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4156"
}

Spasojević Brkić, V., Misita, M., Bugarić, U., Veljković, Z.,& Vesić Pavlović, T.. (2022). Professor Vukan Dešić as a founder of the department for scientific organization of work : the 70-year jubilee. in 8th International Symposium of Industrial Engineering SIE 2022 : Proceedings, 29th-30th September 2022 Belgrade, Serbia
University of Belgrade Faculty of Mechanical Engineering, Belgrade..
https://hdl.handle.net/21.15107/rcub_machinery_4156

Spasojević Brkić V, Misita M, Bugarić U, Veljković Z, Vesić Pavlović T. Professor Vukan Dešić as a founder of the department for scientific organization of work : the 70-year jubilee. in 8th International Symposium of Industrial Engineering SIE 2022 : Proceedings, 29th-30th September 2022 Belgrade, Serbia. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_4156 .

Spasojević Brkić, Vesna, Misita, Mirjana, Bugarić, Uglješa, Veljković, Zorica, Vesić Pavlović, Tijana, "Professor Vukan Dešić as a founder of the department for scientific organization of work : the 70-year jubilee" in 8th International Symposium of Industrial Engineering SIE 2022 : Proceedings, 29th-30th September 2022 Belgrade, Serbia (2022),
https://hdl.handle.net/21.15107/rcub_machinery_4156 .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Perišić, Martina
AU  - Veljković, Zorica
AU  - Misita, Mirjana
AU  - Damjanović, Milanko
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6809
AB  - Research related to risk management of failures and stoppages in the  operation  of bulldozer is  very  limited,  so  this topic  needs  more  attention. This  study  aims  to  identify  all  possible  causes  for  bulldozer failures  and stoppages before highlighting the most significant ones. Descriptive statistics are  provided,  followed  by  a  scatterplot  for  the  dissipation  diagram  between hazard rate and bulldozer failure and stoppages, and histograms of hazard rate and failures and stoppages for bulldozers. Then, for three categories, a Pareto analysis  was  performed on failures  and  stoppages frequency, time  spent  in failures and  stoppages,  and failures  and  stoppages risk level.  The  Pareto analysis  revealed  that  the  most important  failures  and  stoppages in  all  three categories were caused by heating repair, oil change, bulldozer cleaning, tonsil adjustment, filter replacement, hose replacement and screw replacement. The step towards “maintenance free factories” should include planning of identified activities in work breaks as preventive rather than corrective activities
T2  - Industrija
T1  - Pareto analysis in bulldozer’s failures and stoppages risk management
EP  - 49
IS  - 2
SP  - 37
VL  - 50
DO  - 10.5937/industrija50-41907
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Perišić, Martina and Veljković, Zorica and Misita, Mirjana and Damjanović, Milanko",
year = "2022",
abstract = "Research related to risk management of failures and stoppages in the  operation  of bulldozer is  very  limited,  so  this topic  needs  more  attention. This  study  aims  to  identify  all  possible  causes  for  bulldozer failures  and stoppages before highlighting the most significant ones. Descriptive statistics are  provided,  followed  by  a  scatterplot  for  the  dissipation  diagram  between hazard rate and bulldozer failure and stoppages, and histograms of hazard rate and failures and stoppages for bulldozers. Then, for three categories, a Pareto analysis  was  performed on failures  and  stoppages frequency, time  spent  in failures and  stoppages,  and failures  and  stoppages risk level.  The  Pareto analysis  revealed  that  the  most important  failures  and  stoppages in  all  three categories were caused by heating repair, oil change, bulldozer cleaning, tonsil adjustment, filter replacement, hose replacement and screw replacement. The step towards “maintenance free factories” should include planning of identified activities in work breaks as preventive rather than corrective activities",
journal = "Industrija",
title = "Pareto analysis in bulldozer’s failures and stoppages risk management",
pages = "49-37",
number = "2",
volume = "50",
doi = "10.5937/industrija50-41907"
}

Spasojević Brkić, V., Perišić, M., Veljković, Z., Misita, M.,& Damjanović, M.. (2022). Pareto analysis in bulldozer’s failures and stoppages risk management. in Industrija, 50(2), 37-49.
https://doi.org/10.5937/industrija50-41907

Spasojević Brkić V, Perišić M, Veljković Z, Misita M, Damjanović M. Pareto analysis in bulldozer’s failures and stoppages risk management. in Industrija. 2022;50(2):37-49.
doi:10.5937/industrija50-41907 .

Spasojević Brkić, Vesna, Perišić, Martina, Veljković, Zorica, Misita, Mirjana, Damjanović, Milanko, "Pareto analysis in bulldozer’s failures and stoppages risk management" in Industrija, 50, no. 2 (2022):37-49,
https://doi.org/10.5937/industrija50-41907 . .

TY  - JOUR
AU  - Brkić, Aleksandar
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Golubović, Tamara
AU  - Papić, Neda
AU  - Perišić, Martina
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4406
AB  - According to available literature, safety at work and productivity of cranes are a necessary and insufficiently researched topic. Both research directions are closely related because they depend on the number and type of stoppages that occur during operation of these construction machines.
The focus of research should be on identifying the stoppages that can have fatal consequences for employees on-site, or unintended consequences in terms of production loss, means of work, or environment. In the present research, an attempt is made to create a methodology for identification, analysis, assessment, classification, and calculation of stoppage risk
in cranes (classified by categories and causes). Criteria used for analysis, assessment, and calculation of stoppage risk: degree of stoppage danger, frequency of stoppage classified
according to stoppage categories/causes, and downtime according to the adopted classification. Experimental research on a sample of 1,091 stoppages recorded on several cranes
over a longer time interval has confirmed the hypothesis of generating a 3-criterion matrix for stoppage risk assessment sensitive enough to prioritize key crane stoppage in terms
of risk. Results of experimental research indicate mechanical downtime of 16.22 %, a frequency 45.35 % in downtime, and RPN number 80, at hazard level 10. Selectively, according to the cause of stoppage, the results indicate that the hoisting brake (6.48 % downtime at hazard level 10; 2.14 % stoppage frequency) and hoist gear/tooth breakage (5.29 % downtime at hazard level 10; 3.58 % stoppage frequency) are key mechanical causes of stoppages and crane risk generators. By mitigating the given risks, it is possible to improve safety and increase productivity.
PB  - Beograd : DIVK
T2  - Structural integrity and life
T1  - Crane stoppages risk assessment
EP  - 346
IS  - 3
SP  - 339
VL  - 22
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4406
ER  - 

@article{
author = "Brkić, Aleksandar and Misita, Mirjana and Spasojević Brkić, Vesna and Golubović, Tamara and Papić, Neda and Perišić, Martina",
year = "2022",
abstract = "According to available literature, safety at work and productivity of cranes are a necessary and insufficiently researched topic. Both research directions are closely related because they depend on the number and type of stoppages that occur during operation of these construction machines.
The focus of research should be on identifying the stoppages that can have fatal consequences for employees on-site, or unintended consequences in terms of production loss, means of work, or environment. In the present research, an attempt is made to create a methodology for identification, analysis, assessment, classification, and calculation of stoppage risk
in cranes (classified by categories and causes). Criteria used for analysis, assessment, and calculation of stoppage risk: degree of stoppage danger, frequency of stoppage classified
according to stoppage categories/causes, and downtime according to the adopted classification. Experimental research on a sample of 1,091 stoppages recorded on several cranes
over a longer time interval has confirmed the hypothesis of generating a 3-criterion matrix for stoppage risk assessment sensitive enough to prioritize key crane stoppage in terms
of risk. Results of experimental research indicate mechanical downtime of 16.22 %, a frequency 45.35 % in downtime, and RPN number 80, at hazard level 10. Selectively, according to the cause of stoppage, the results indicate that the hoisting brake (6.48 % downtime at hazard level 10; 2.14 % stoppage frequency) and hoist gear/tooth breakage (5.29 % downtime at hazard level 10; 3.58 % stoppage frequency) are key mechanical causes of stoppages and crane risk generators. By mitigating the given risks, it is possible to improve safety and increase productivity.",
publisher = "Beograd : DIVK",
journal = "Structural integrity and life",
title = "Crane stoppages risk assessment",
pages = "346-339",
number = "3",
volume = "22",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4406"
}

Brkić, A., Misita, M., Spasojević Brkić, V., Golubović, T., Papić, N.,& Perišić, M.. (2022). Crane stoppages risk assessment. in Structural integrity and life
Beograd : DIVK., 22(3), 339-346.
https://hdl.handle.net/21.15107/rcub_machinery_4406

Brkić A, Misita M, Spasojević Brkić V, Golubović T, Papić N, Perišić M. Crane stoppages risk assessment. in Structural integrity and life. 2022;22(3):339-346.
https://hdl.handle.net/21.15107/rcub_machinery_4406 .

Brkić, Aleksandar, Misita, Mirjana, Spasojević Brkić, Vesna, Golubović, Tamara, Papić, Neda, Perišić, Martina, "Crane stoppages risk assessment" in Structural integrity and life, 22, no. 3 (2022):339-346,
https://hdl.handle.net/21.15107/rcub_machinery_4406 .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Veljković, Zorica
AU  - Brkić, Aleksandar
AU  - Misita, Mirjana
AU  - Perišić, Martina
AU  - Papić, Neda
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4110
AB  - As industrial systems represent a complex socio-technical system, it is necessary to analyse the impact of manager-operator-machine interaction on industrial safety, as categories of contextual factors. However, modern scientific literature indicates insufficient research on this topic. This paper has an aim to empirically analyse behavioural style and transport and mining machines operators’ attitudes in the safety climate context. Participants in this study were 28 crane’s and 65 mining machinery’s (excavators, bucket wheel excavators, bulldozers, loaders, graders, backhoe loaders, trenchers, dump trucks and scrapers) operators working in Serbian industrial companies. In the first step there is conducted descriptive statistics and followed by Kolmogorov’s and U* Mann-Whitney test to examine differences. Obtained results have shown that there were not statistically significant differences both between attitudes of operators on those two kinds of machines, namely, there are no statistically significant differences in terms of absenteeism due to poor working conditions, atmosphere of cooperation and togetherness among operators and the ways in which managers motivate and reward them. Between numbers of injuries at work happened by both machines’ types used there are no statistical differences, too. Also, further factor analysis has shown that examined operators’ and machines’ characteristics divide into two factors – one is focused to anthropometric characteristics presented by height and weight while another is focused on age of operator and machine and operator’s experience. It is recommended, in future research to enlarge sample, repeat statistical testing and analyse wider set of variables on examined matters in aim to discover pattern of anthropometric factors influence on behavioural factors.
PB  - Belgrade : Institute for research and design in industry
T2  - Journal of Applied Engineering Science
T1  - Transport and Mining Machines Operators’ Behavioral Attitudes in Safety Climate Context
EP  - 1202
IS  - 4
SP  - 1196
VL  - 20
DO  - https://doi.org/10.5937/jaes0-37669
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Veljković, Zorica and Brkić, Aleksandar and Misita, Mirjana and Perišić, Martina and Papić, Neda",
year = "2022",
abstract = "As industrial systems represent a complex socio-technical system, it is necessary to analyse the impact of manager-operator-machine interaction on industrial safety, as categories of contextual factors. However, modern scientific literature indicates insufficient research on this topic. This paper has an aim to empirically analyse behavioural style and transport and mining machines operators’ attitudes in the safety climate context. Participants in this study were 28 crane’s and 65 mining machinery’s (excavators, bucket wheel excavators, bulldozers, loaders, graders, backhoe loaders, trenchers, dump trucks and scrapers) operators working in Serbian industrial companies. In the first step there is conducted descriptive statistics and followed by Kolmogorov’s and U* Mann-Whitney test to examine differences. Obtained results have shown that there were not statistically significant differences both between attitudes of operators on those two kinds of machines, namely, there are no statistically significant differences in terms of absenteeism due to poor working conditions, atmosphere of cooperation and togetherness among operators and the ways in which managers motivate and reward them. Between numbers of injuries at work happened by both machines’ types used there are no statistical differences, too. Also, further factor analysis has shown that examined operators’ and machines’ characteristics divide into two factors – one is focused to anthropometric characteristics presented by height and weight while another is focused on age of operator and machine and operator’s experience. It is recommended, in future research to enlarge sample, repeat statistical testing and analyse wider set of variables on examined matters in aim to discover pattern of anthropometric factors influence on behavioural factors.",
publisher = "Belgrade : Institute for research and design in industry",
journal = "Journal of Applied Engineering Science",
title = "Transport and Mining Machines Operators’ Behavioral Attitudes in Safety Climate Context",
pages = "1202-1196",
number = "4",
volume = "20",
doi = "https://doi.org/10.5937/jaes0-37669"
}

Spasojević Brkić, V., Veljković, Z., Brkić, A., Misita, M., Perišić, M.,& Papić, N.. (2022). Transport and Mining Machines Operators’ Behavioral Attitudes in Safety Climate Context. in Journal of Applied Engineering Science
Belgrade : Institute for research and design in industry., 20(4), 1196-1202.
https://doi.org/https://doi.org/10.5937/jaes0-37669

Spasojević Brkić V, Veljković Z, Brkić A, Misita M, Perišić M, Papić N. Transport and Mining Machines Operators’ Behavioral Attitudes in Safety Climate Context. in Journal of Applied Engineering Science. 2022;20(4):1196-1202.
doi:https://doi.org/10.5937/jaes0-37669 .

Spasojević Brkić, Vesna, Veljković, Zorica, Brkić, Aleksandar, Misita, Mirjana, Perišić, Martina, Papić, Neda, "Transport and Mining Machines Operators’ Behavioral Attitudes in Safety Climate Context" in Journal of Applied Engineering Science, 20, no. 4 (2022):1196-1202,
https://doi.org/https://doi.org/10.5937/jaes0-37669 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
AU  - Bugarić, Uglješa
AU  - Veljković, Zorica
AU  - Vesić Pavlović, Tijana
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4123
AB  - Iako je izvanrednost profesora Vukana Dešića neosporna i u svetskim razmerama, o njegovoj biografiji i doprinosu naučnoj oblasti je do sada, nažalost, vrlo malo pisano. Cilј ovog preglednog rada jeste da sakupi i objedini sve u bibliotekama i arhivima trenutno raspoložive biografske činjenice, a zatim da istakne i nastavne, naučne i stručne doprinose koje je profesor Vukan Dešić tokom svog plodnog života ostavio, kao što su: 1) doprinos razvoju visokoškolskog obrazovanja kroz obavlјanje funkcija prorektora,
dekana i rektora Univerziteta u Beogradu i Mašinskog fakulteta; 2) doprinos razvoju železnica na funkciji generalnog direktora Jugoslovenskih državnih železnica i pomoćnika ministra železnice, odnosno, saobraćaja; 3) doprinos da je, davne 1949. godine, uveo nastavu iz predmeta Naučna organizacija rada i osnovao Katedru za naučnu organizaciju rada pre ravno 70 godina na Mašinskom fakultetu u Beogradu; 4) zaslužan je za formiranje Saobraćajnog fakulteta, inicijator osnivanja Fakulteta organizacionih nauka i Više tehničke mašinske škole; 5) doprinos razvoju naučnog prostora kao direktora i/ili osnivača većeg broja instituta i naučnih društava (npr. Centra za  multidisciplinarne studije, Jugoslovenskog društva za mehaniku); 6) mnogobrojne naučne i stručne doprinose ogromnih razmera, među kojima posebno treba akcentovati da je začetnik kontingentne teorije organizacije i
kreator inovativne Kompleksne analitičke metode, preteča otkrića Išikave i ozbilјan kritičar Tejlora, koji opovrgava premise da je Henri Taun postavio temelјe menadžmenta i organizacije.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Profesor Vukan Dešić kao osnivač katedre za naučnu organizaciju rada: 70. jubilej
IS  - 5
VL  - 71
DO  - 10.5937/tehnika2205605S
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Misita, Mirjana and Bugarić, Uglješa and Veljković, Zorica and Vesić Pavlović, Tijana",
year = "2022",
abstract = "Iako je izvanrednost profesora Vukana Dešića neosporna i u svetskim razmerama, o njegovoj biografiji i doprinosu naučnoj oblasti je do sada, nažalost, vrlo malo pisano. Cilј ovog preglednog rada jeste da sakupi i objedini sve u bibliotekama i arhivima trenutno raspoložive biografske činjenice, a zatim da istakne i nastavne, naučne i stručne doprinose koje je profesor Vukan Dešić tokom svog plodnog života ostavio, kao što su: 1) doprinos razvoju visokoškolskog obrazovanja kroz obavlјanje funkcija prorektora,
dekana i rektora Univerziteta u Beogradu i Mašinskog fakulteta; 2) doprinos razvoju železnica na funkciji generalnog direktora Jugoslovenskih državnih železnica i pomoćnika ministra železnice, odnosno, saobraćaja; 3) doprinos da je, davne 1949. godine, uveo nastavu iz predmeta Naučna organizacija rada i osnovao Katedru za naučnu organizaciju rada pre ravno 70 godina na Mašinskom fakultetu u Beogradu; 4) zaslužan je za formiranje Saobraćajnog fakulteta, inicijator osnivanja Fakulteta organizacionih nauka i Više tehničke mašinske škole; 5) doprinos razvoju naučnog prostora kao direktora i/ili osnivača većeg broja instituta i naučnih društava (npr. Centra za  multidisciplinarne studije, Jugoslovenskog društva za mehaniku); 6) mnogobrojne naučne i stručne doprinose ogromnih razmera, među kojima posebno treba akcentovati da je začetnik kontingentne teorije organizacije i
kreator inovativne Kompleksne analitičke metode, preteča otkrića Išikave i ozbilјan kritičar Tejlora, koji opovrgava premise da je Henri Taun postavio temelјe menadžmenta i organizacije.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Profesor Vukan Dešić kao osnivač katedre za naučnu organizaciju rada: 70. jubilej",
number = "5",
volume = "71",
doi = "10.5937/tehnika2205605S"
}

Spasojević Brkić, V., Misita, M., Bugarić, U., Veljković, Z.,& Vesić Pavlović, T.. (2022). Profesor Vukan Dešić kao osnivač katedre za naučnu organizaciju rada: 70. jubilej. in Tehnika
Beograd : Savez inženjera i tehničara Srbije., 71(5).
https://doi.org/10.5937/tehnika2205605S

Spasojević Brkić V, Misita M, Bugarić U, Veljković Z, Vesić Pavlović T. Profesor Vukan Dešić kao osnivač katedre za naučnu organizaciju rada: 70. jubilej. in Tehnika. 2022;71(5).
doi:10.5937/tehnika2205605S .

Spasojević Brkić, Vesna, Misita, Mirjana, Bugarić, Uglješa, Veljković, Zorica, Vesić Pavlović, Tijana, "Profesor Vukan Dešić kao osnivač katedre za naučnu organizaciju rada: 70. jubilej" in Tehnika, 71, no. 5 (2022),
https://doi.org/10.5937/tehnika2205605S . .

TY  - JOUR
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Brkić, Aleksandar
AU  - Kirin, Snežana
AU  - Rakonjac, Ivan
AU  - Damjanović, Milanko
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3636
AB  - In this paper, problem of mining machinery efficiency is considered through impact of different types of downtimes. New methodology is suggested based on comparison impact of mechanical and technological mining machinery time in fault (M-t, T-t) and mechanical and technological mining machinery downtime frequencies (M-f, T-f) on machine work done (W). Benchmarking analysis is conducted by pairing variables M-t-W, T-t-W, M-f-W and T-f-W, and determining relationships between observed variables. By comparing the increment of the cumulative downtime curve with the cumulative curve of the machine's operating volume, it can be assessed whether the observed downtime develops a concave or convex character of the operating volume cumulative curve, in respect to significant losses. Results indicate that the relationship between cumulative downtime curve and cumulative work done curve can successfully serve as a parameter for evaluating the impact of specific downtime on the efficiency of the machine. A multi-criteria analysis, namely, an analysis of the criteria - frequency and time spent in downtime for each of the observed causes of downtime, clearly determines the critical pattern of downtime on the efficiency of the observed machine.
PB  - Institut za ispitivanje materijala, Beograd
T2  - Structural Integrity and Life
T1  - Impact of downtime pattern on mining machinery efficiency
EP  - 35
IS  - 1
SP  - 29
VL  - 21
UR  - https://hdl.handle.net/21.15107/rcub_machinery_3636
ER  - 

@article{
author = "Misita, Mirjana and Spasojević Brkić, Vesna and Brkić, Aleksandar and Kirin, Snežana and Rakonjac, Ivan and Damjanović, Milanko",
year = "2021",
abstract = "In this paper, problem of mining machinery efficiency is considered through impact of different types of downtimes. New methodology is suggested based on comparison impact of mechanical and technological mining machinery time in fault (M-t, T-t) and mechanical and technological mining machinery downtime frequencies (M-f, T-f) on machine work done (W). Benchmarking analysis is conducted by pairing variables M-t-W, T-t-W, M-f-W and T-f-W, and determining relationships between observed variables. By comparing the increment of the cumulative downtime curve with the cumulative curve of the machine's operating volume, it can be assessed whether the observed downtime develops a concave or convex character of the operating volume cumulative curve, in respect to significant losses. Results indicate that the relationship between cumulative downtime curve and cumulative work done curve can successfully serve as a parameter for evaluating the impact of specific downtime on the efficiency of the machine. A multi-criteria analysis, namely, an analysis of the criteria - frequency and time spent in downtime for each of the observed causes of downtime, clearly determines the critical pattern of downtime on the efficiency of the observed machine.",
publisher = "Institut za ispitivanje materijala, Beograd",
journal = "Structural Integrity and Life",
title = "Impact of downtime pattern on mining machinery efficiency",
pages = "35-29",
number = "1",
volume = "21",
url = "https://hdl.handle.net/21.15107/rcub_machinery_3636"
}

Misita, M., Spasojević Brkić, V., Brkić, A., Kirin, S., Rakonjac, I.,& Damjanović, M.. (2021). Impact of downtime pattern on mining machinery efficiency. in Structural Integrity and Life
Institut za ispitivanje materijala, Beograd., 21(1), 29-35.
https://hdl.handle.net/21.15107/rcub_machinery_3636

Misita M, Spasojević Brkić V, Brkić A, Kirin S, Rakonjac I, Damjanović M. Impact of downtime pattern on mining machinery efficiency. in Structural Integrity and Life. 2021;21(1):29-35.
https://hdl.handle.net/21.15107/rcub_machinery_3636 .

Misita, Mirjana, Spasojević Brkić, Vesna, Brkić, Aleksandar, Kirin, Snežana, Rakonjac, Ivan, Damjanović, Milanko, "Impact of downtime pattern on mining machinery efficiency" in Structural Integrity and Life, 21, no. 1 (2021):29-35,
https://hdl.handle.net/21.15107/rcub_machinery_3636 .