Претраживање
Приказ резултата 21-30 од 1284
Functional simulator of 3-axis parallel kinematic milling machine
(Springer London Ltd, Artington, 2009)
Parallel kinematic machines (PKM) are research-and-development topic in many laboratories although many of them, unfortunately, have no PKM at all. Therefore, the use of low cost but functional simulator of a 3-Axis parallel ...
Thermohydraulic experimental design for the European Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2008)
The peculiarities of the coolant flow in Helium-Cooled-Pebble-Bed Test Blanket Module (TBM) are (i) very intensive heating of the first wall from the plasma side and (ii) very complicated geometry of How domain consisting ...
Microstructural and tribological properties of A356 Al-Si alloy reinforced with Al2O3 particles
(Springer/Plenum Publishers, New York, 2008)
In the present study, the effect of the Al2O3 particles (average size of 12 mu m, 3 and 10 wt.%) reinforcement on the microstructure and tribological properties of Al-Si alloy (A356) was investigated. Composites were ...
Modeling, simulation, and control of an electromechanical aerofin control system with a PWM-controlled DC motor
(Automatic Control and Computer Sciences, 2008)
A nonlinear model of an electromechanical actuator (EMA) system for aerofin control is presented. The EMA is realized with a permanent magnet brush DC motor controlled by a constant current driver. In this paper we introduced ...
Context sensitive recognition of abrupt changes in cutting process
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
This paper presents a new generic approach to real-time monitoring of abrupt changes in cutting process. Proposed method is based on hierarchical fuzzy clustering of patterns obtained from discrete wavelet transform (DWT) ...
Delamination detection in woven composite laminates with embedded optical fibers
(Wiley-VCH Verlag, 2001)
Off-design flow analysis of low-pressure steam turbines
(Sage Publications Ltd, London, 1997)
In this paper, a method for how calculation in large steam turbines is presented. The method is based on the through-flow theory and the finite element procedure. It includes some extensions and improvements in the form ...
Ultimate load-bearing capacity of the corrugated floor sheet in railroad vehicles
(Springer, New York, 1999)
Endohedral fullerenes: Biomedical approach
(Archive of Oncology, 1997)
Background: Fullerenes can form three distinct types of binding sites: surface, substitutional and endohedral. Numerous metallofullerenes have been synthesized by the inclusion of metal sources in the graphite used for ...
Screen printed barium titanate thick films prepared from mechanically activated powders
(Trans Tech Publications Ltd, 2002)
Barium titanate thick films were prepared from mechanically activated powders based on BaCO3 and TiO2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850°C ...