Search
Now showing items 1-10 of 17
3D modeling and motion analysis of the Maltese cross (Geneva) mechanisms
(National Taiwan University, 2015)
The paper presents a several 3D computer model of the Maltese cross (Geneva) mechanism. In purposes of examination Maltese cross mechanisms project contain three type of 3D computer model of the Maltese cross mechanism. ...
Development of "omega" deformeter
(National Taiwan University, 2015)
Since the late thirties of the former century, Strain gauge is a renowned device for the stress-strain measurements on a different kinds of structures. There is a great variety of Strain gauges on the market and despite ...
An example of passive micromixer design, simulation and optimization
(Institute of Electrical and Electronics Engineers Inc., 2015)
The paper presents the designing process of the passive micromixer. Design parameters of microfluidic channel's geometry are optimized based on flow simulation results. CAD software Solid Works and application Flo Xpress ...
An Example of Passive Micromixer Design, Simulation and Optimization Biomedical engineering MSc Thesis
(IEEE, New York, 2015)
The paper presents the designing process of the passive micromixer. Design parameters of microfluidic channel's geometry are optimized based on flow simulation results. CAD software Solid Works and application Flo Xpress ...
Cyber-Physical Manufacturing Metrology Model (CPM3) for Sculptured Surfaces - Turbine Blade Application
(Elsevier Science Bv, Amsterdam, 2017)
Cyber-Physical Manufacturing (CPM) and digital manufacturing represent the key elements for implementation of Industry 4.0 framework. Worldwide, Industry 4.0 becomes national research strategy in the field of engineering ...
A Simulation Study of Fuel Economy Improvement Potentials of a Transit Bus
(Proceedings of the 24th International Automotive Conference Science and Motor Vehicles 2013, 2013)
The AMESim model of motor vehicle driving simulation has been applied on a transit bus to investigate the potentials for fuel economy improvement. With the purpose to calibrate the simulation model and to evaluate the real ...
Simulation Study of a Transit Bus Equipped with an Ultracapacitor-Based Hybrid System
(University of Banja Luka, Faculty of Mechanical Engineering, 2013)
Due to the significant share of Internal Combustion Engines (ICE) in global energy demand, primarily through the transportation sector, great efforts are invested in research for solutions that will increase the fuel economy ...
Some Results Of Control And Simulation Of Neuro Arm Robot
(University of Banja Luka, Faculty of Mechanical Engineering, 2013)
In this paper they are presented the control algorithms of integer and
fractional order PID control in the position control of a 3 DOF`s robotic system
(NeuroArm).Finally, the effectiveness of proposed control is illustrated ...
SIMULATION, ANALYSIS AND OPTIMIZATION OF FORGING PROCESS FOR AXISYMMETRIC PART
(UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF PRODUCTION ENGINEERING DEPARTMENT OF INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, 2023)
Forging, as a type of technological process based on metal forming, is widely used in the modern
manufacturing industry. This paper is focused on the utilization of CAE software tools for simulating the forging process ...
Reinforcement Learning-based Collision Avoidance for UAV
(ETRAN Society, The Society for Electronics, Telecommunications, Computing, Automatics and Nuclear engineering supported by IEEE, 2023)
One of the significant aspects for enabling the intelligent behavior to the Unmanned Aerial Vehicles (UAVs) is by providing an algorithm for navigation through the dynamic and unseen environment. Therefore, to be autonomous, ...