Претраживање
Приказ резултата 61-70 од 90
Mock-up testing facilities and qualification strategy for EU ITER TBMs
(Elsevier Science Sa, Lausanne, 2010)
European test blanket modules (TBM) for both European blanket concepts, namely the Helium Cooled Lithium Lead (HCLL) and the Helium Cooled Pebble Bed (HCPB), and their auxiliary systems have been designed in the last years. ...
Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The supporting truss of the counterweight boom is a vital part of the bucket chain excavator's (BCE) superstructure. The occurrence and propagation of cracks in the supporting truss columns' heads may lead to BCE collapse. ...
Geometry, mechanical and ballistic properties of ADI material perforated plates
(Elsevier Sci Ltd, Oxford, 2015)
In this paper, austempered ductile iron has been evaluated as an alternative to steel for perforated plates applied in the ballistic protection of military vehicles. The austempering was performed in lower and higher ...
An attempt to create a standardized (reference) model for experimental investigations on implant's sample
(Elsevier Sci Ltd, Oxford, 2015)
The aim of this study was to determine, evaluate and measure strain of vertically loaded implant using the digital image correlation method. The Straumann (R) dental implant system with the SLActive (R) surface was used ...
Experimental investigations of flow distribution in coolant system of Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2016)
This paper deals with investigations of flow distribution in the coolant system of the Helium-Cooled Pebble -Bed Test Blanket Module (HCPB TBM) for ITER. The investigations have been performed by manufacturing and testing ...
Picosecond Laser Shock Peening of Nimonic 263 at 1064 nm and 532 nm Wavelength
(MDPI, Basel, 2016)
The paper presents a study on the surface modifications of nickel based superalloy Nimonic 263 induced by laser shock peening (LSP) process. The process was performed by Nd3+:Yttrium Aluminium Garnet (YAG) picosecond laser ...
Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
(Elsevier Sci Ltd, Oxford, 2017)
This paper describes fatigue crack growth in a friction stir welded T joints made of aluminum alloy A2024-T351 under three point bending loads. For this purpose, three dimensional homogeneous isotropic model is used to ...
HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
(Elsevier Science Sa, Lausanne, 2011)
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first ...
Estimation of the number of trays for natural gas triethylene glycol dehydration column
(Elsevier, Amsterdam, 2011)
The paper deals with the tray-to-tray method for determining the required number of trays in columns with intensive entrainment of liquid when the operating line of the "dry working regime" is not straight and with a small ...
Failure analysis of the combat jet aircraft rudder shaft
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This paper analyzes failure causes of the combat jet aircraft rudder shaft (RS) which occurred during the flight mission. A finite element method (FEM), utilized to determine the stress state of the RS subjected to hinge ...