Претраживање
Приказ резултата 71-80 од 90
Utilization of waste ceramics and roof tiles for radionuclide sorption
(Inst Chemical Engineers, Rugby, 2017)
The possible utilization of waste ceramic (CT) and roof tiles (RT), as sorbents for liquid radioactive waste (LRW) treatment, was investigated. Following the European directives on waste and politics of saving natural raw ...
Integrity assessment and determination of residual fatigue life of vital parts of bucket-wheel excavator operating under dynamic loads
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper are presented results of tests and analyses of complex dynamic loads carried out on the bucket-wheel excavator SchRs 650/5x24 Krupp, as well as assessment of service life of vital welded structures of a ...
Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron
(Korean Inst Metals Materials, Seoul, 2014)
The aim of the paper was to investigate the effect of austempering parameters (time and temperature) on the microstructure and mechanical properties of ADI alloyed with 1.5% Cu and 1.6% Ni (in wt.%) in order to establish ...
Experimental studies on active vibration control of smart plate using a modified PID controller with optimal orientation of piezoelectric actuator
(Sage Publications Ltd, London, 2016)
This paper presents a design, development and experimental verification of an active vibration control system of aluminum plate. The active structure consists of an aluminum rectangular plate as the host structure, strain ...
Geometry, mechanical and ballistic properties of ADI material perforated plates
(Elsevier Sci Ltd, Oxford, 2015)
In this paper, austempered ductile iron has been evaluated as an alternative to steel for perforated plates applied in the ballistic protection of military vehicles. The austempering was performed in lower and higher ...
A contribution to the optimal numbering of a ring structure
(Computers and Structures, 1988)
An optimal element numbering of a pipeline system containing rings is considered. In order to minimize the front width two possible cases of ring structure are analysed and solved in different manners. An example is shown ...
Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams
(Elsevier Science Inc, New York, 2002)
In consideration of the very high energy consumption of drying processes it is astonishing and disadvantageous that the majority of industrial dryers are offered and operated without energy recovery. The avoidance of fouling ...
Efficient helium cooling methods for nuclear fusion devices: Status and prospects
(Elsevier Science Sa, Lausanne, 2009)
Helium-cooled reactors offer several important advantages as the helium is an inert and neutron transparent gas. compatible with high outlet temperatures and all structural and functional materials considered for plasma ...
Balance of liquid-phase turbulence kinetic energy equation for bubble-train flow
(Atomic Energy Soc Japan, Tokyo, 2004)
In this paper the investigation of bubble-induced turbulence using direct numerical simulation (DNS) of bubbly two-phase flow is reported. DNS computations are performed for a bubble-driven liquid motion induced by a regular ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...