Pretraživanje
Prikaz rezultata 51-60 od 92
Fatigue crack growth in a structure exposed to high temperature
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
The exhaust nozzle, made of titanium, is the part of a jet engine where the final expansion of the hot gas from the turbine occurs and where the speed of the exhaust gas is further increased to create thrust. During the ...
Recent Advances on Hydrogen Embrittlement Understanding and Future Research Framework, Editorial
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
Thermal-hydraulics of helium cooled First Wall channels and scoping investigations on performance improvement by application of ribs and mixing devices
(Elsevier Science Sa, Lausanne, 2016)
The first wall (FW) of DEMO is a component with high thermal loads. The cooling of the FW has to comply with the material's upper and lower temperature limits and requirements from stress assessment, like low temperature ...
Fracture mechanics and fatigue crack propagation in armor steel welds
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The welding process of armor steel is a complex process due to possible welding faults appearing in all zones of weld metal joint in the form of cracks and pores, as results of high percentage of carbon in the base metal. ...
Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, the results of determining the Paris law coefficients, C and m, are presented, based on the experimental data obtained by three-point bending testing of 8 welded joint specimens. The specimens were taken ...
Risk assessment of oil drilling rig welded pipe based on structural integrity and life estimation
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
Risk assessment procedure based on structural integrity and life estimation has been introduced and applied to oil drilling rig welded pipe. The new concept based on application of structural integrity and life estimation ...
Engineering critical assessment of steel shell structure elements welded joints under high cycle fatigue
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
Existing flaws in critical parts of structural elements may lead to failures of subassemblies and, in case of lack of redundancy, even to the entire structure collapse. Considering the case of cyclic loading - wind load ...
Numerical simulation of "Hall 1 of the Belgrade Fair"
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
This paper involves the analytical and numerical calculations of the the largest pre-stressed concrete free-standing structure in the world - the Dome of the "Hall 1 of the Belgrade Fair", designed by a well-known Serbian ...
Effect of laser shock peening with and without protective coating on the microstructure and mechanical properties of Ti-alloy
(Elsevier Sci Ltd, Oxford, 2020)
Owing to their good mechanical properties, titanium based alloys are used for machine parts and devices that operate in demanding regimes and environmental conditions. Laser shock peening (LSP) is an innovative technique ...
Stress intensity factors numerical calculations for two penny shaped cracks in the elastic solid
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
In the face of enormous costs of developing new aircraft, high fuel prices, increasingly demanding environmental standards, harsh economic race and the fight against competing manufacturers, today's aviation is adapting ...