Pretraživanje
Prikaz rezultata 21-30 od 35
Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept
(Taylor & Francis Inc, Philadelphia, 2009)
In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) is developed to investigate DEMO relevant concepts ...
Failure analysis of the end eye connection of the bucket wheel excavator portal tie-rod support
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
This paper describes the failure analysis results of the bucket wheel excavator (BWE) portal tie-rod support. The results of finite elements analysis (FEA) point out the occurrence of pronounced stress concentration, whereby ...
Physical and metallurgic changes during the friction welding of high-speed cutting steel and tempered steel
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2009)
This paper outlines the basic principles of welding by friction of high-speed cutting steel and tempered steel from the viewpoint of metallurgic processes that are going on in the material. The bases of welding by friction ...
Damage Level Estimate of API J55 Steel for Welded Seam Casing Pipes
(Croation Union of Mech. Engineers and Naval Architects, 2009)
The subject of this paper is investigation of the damage level of API J55 steel, used for manufacturing casing pipes by high frequency (HF) contact welding. The analysed pipe was withdrawn after about 70 000 hours of service ...
Measurement of strain using stereometry
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2009)
This paper presents measurement of strain using stereometry method. It describes the use of digital stereometry to measure microstrains on the surface. This can be achieved by comparison of the images of point distribution ...
An Approach to the Optimization of a Thin-walled Z-beam
(Strojniski Vestnik/Journal of Mechanical Engineering, 2009)
One approach to the optimization of a thin-walled open section Z-beam subjected to bending and to the constrained torsion is considered. For given loads, material and geometrical characteristics the problem is reduced to ...
MKE model zupčanika sa kosim zupcima za analizu naponskog stanja i nelinearnu analizu kontakta / Finite element model for stress analysis and nonlinear contact analysis of helical gears
(Vojnotehnički institut, Beograd, 2009)
Određivanje naponskog i deformacionog stanja na bokovima i u podnožju zubaca jedan je od osnovnih zadataka u toku proračuna opterećenja i provere nosivosti zupčanika. U ovom radu opisan je postupak razvijanja modela konačnih ...
Application of Complete Gurson Model for prediction of ductile fracture in welded steel joints
(Trans Tech Publications Ltd, 2009)
Ductile fracture process includes three stages: void nucleation, their growth and coalescence. The voids nucleate due to the fracture or separation of non-metallic inclusions and secondary-phase particles from the material ...
Improvement of energy performances of dwelling housing in Belgrade
(PLEA 2009 - Architecture Energy and the Occupant's Perspective: Proceedings of the 26th Internationa, 2009)
The main concern of this research is to estimate different possibilities of energy performances improvement of existing dwelling housing in settlement Konjarnik, Belgrade, Serbia. Different solutions for reduction of energy ...
Hronologija gubitka integriteta konstrukcija zbog grešaka izrade zavarenih konstrukcija / Chronology of lost structural integrity initiated from manufacturing defects in welded structures
(Institut za ispitivanje materijala, Beograd, 2009)
U različitim vremenskim periodima dolazilo je do gubitka integriteta zavarenih konstrukcija zbog razvoja proizvodnih grešaka zavarenog spoja. Mehanizmi otkaza su bili različiti i uvek su predstavljali novo iskustvo, koje ...