Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept
Само за регистроване кориснике
2009
Аутори
Cismondi, F.Rey, J.
von der Weth, A.
Kecskes, S.
Neuberger, H.
Ilić, Milica
Bitz, O.
Boccaccini, L.V.
Ihli, T.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) is developed to investigate DEMO relevant concepts for blanket modules. The main functions of a blanket module (heat removal, tritium breeding and sensitive components shielding) will be tested in DEMO relevant conditions during four different test campaigns in ITER. One TBM of the HCPB concept will be installed into the vacuum vessel connected to one equatorial port designed for vertical TBM orientation during each of the four test campaigns. This paper describes the FZK activities in order to verify the design of the HCPB TBM with regard to operational conditions in ITER and to prove the feasibility of the manufacturing techniques proposed. As the studies performed in FZK up to 2006 concerned a horizontal orientation of the HCPB, a review of the design was necessary to match with the new ITER specifications. Even... if the general architecture of the horizontal TBM is maintained, nevertheless the change of configuration has significant impact on the design of the TBM sub-components. An overview of the new vertical HCPB design is presented, detailing the strategy adopted to assess the design and the thermal and fluid dynamic analyses performed for the TBM First Wall. In parallel to the TBM design and analysis, a large mock-up programme addresses the main issues of manufacturing and performances for single components and systems. The three medium-size mock-ups foreseen in FZK to validate the fabrication and mounting processes are presented detailing their purposes.
Извор:
Fusion Science and Technology, 2009, 56, 1, 221-226Издавач:
- Taylor & Francis Inc, Philadelphia
DOI: 10.13182/FST09-A8906
ISSN: 1536-1055
WoS: 000267549000040
Scopus: 2-s2.0-68949085218
Институција/група
Inovacioni centarTY - JOUR AU - Cismondi, F. AU - Rey, J. AU - von der Weth, A. AU - Kecskes, S. AU - Neuberger, H. AU - Ilić, Milica AU - Bitz, O. AU - Boccaccini, L.V. AU - Ihli, T. PY - 2009 UR - https://machinery.mas.bg.ac.rs/handle/123456789/984 AB - In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) is developed to investigate DEMO relevant concepts for blanket modules. The main functions of a blanket module (heat removal, tritium breeding and sensitive components shielding) will be tested in DEMO relevant conditions during four different test campaigns in ITER. One TBM of the HCPB concept will be installed into the vacuum vessel connected to one equatorial port designed for vertical TBM orientation during each of the four test campaigns. This paper describes the FZK activities in order to verify the design of the HCPB TBM with regard to operational conditions in ITER and to prove the feasibility of the manufacturing techniques proposed. As the studies performed in FZK up to 2006 concerned a horizontal orientation of the HCPB, a review of the design was necessary to match with the new ITER specifications. Even if the general architecture of the horizontal TBM is maintained, nevertheless the change of configuration has significant impact on the design of the TBM sub-components. An overview of the new vertical HCPB design is presented, detailing the strategy adopted to assess the design and the thermal and fluid dynamic analyses performed for the TBM First Wall. In parallel to the TBM design and analysis, a large mock-up programme addresses the main issues of manufacturing and performances for single components and systems. The three medium-size mock-ups foreseen in FZK to validate the fabrication and mounting processes are presented detailing their purposes. PB - Taylor & Francis Inc, Philadelphia T2 - Fusion Science and Technology T1 - Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept EP - 226 IS - 1 SP - 221 VL - 56 DO - 10.13182/FST09-A8906 ER -
@article{ author = "Cismondi, F. and Rey, J. and von der Weth, A. and Kecskes, S. and Neuberger, H. and Ilić, Milica and Bitz, O. and Boccaccini, L.V. and Ihli, T.", year = "2009", abstract = "In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) is developed to investigate DEMO relevant concepts for blanket modules. The main functions of a blanket module (heat removal, tritium breeding and sensitive components shielding) will be tested in DEMO relevant conditions during four different test campaigns in ITER. One TBM of the HCPB concept will be installed into the vacuum vessel connected to one equatorial port designed for vertical TBM orientation during each of the four test campaigns. This paper describes the FZK activities in order to verify the design of the HCPB TBM with regard to operational conditions in ITER and to prove the feasibility of the manufacturing techniques proposed. As the studies performed in FZK up to 2006 concerned a horizontal orientation of the HCPB, a review of the design was necessary to match with the new ITER specifications. Even if the general architecture of the horizontal TBM is maintained, nevertheless the change of configuration has significant impact on the design of the TBM sub-components. An overview of the new vertical HCPB design is presented, detailing the strategy adopted to assess the design and the thermal and fluid dynamic analyses performed for the TBM First Wall. In parallel to the TBM design and analysis, a large mock-up programme addresses the main issues of manufacturing and performances for single components and systems. The three medium-size mock-ups foreseen in FZK to validate the fabrication and mounting processes are presented detailing their purposes.", publisher = "Taylor & Francis Inc, Philadelphia", journal = "Fusion Science and Technology", title = "Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept", pages = "226-221", number = "1", volume = "56", doi = "10.13182/FST09-A8906" }
Cismondi, F., Rey, J., von der Weth, A., Kecskes, S., Neuberger, H., Ilić, M., Bitz, O., Boccaccini, L.V.,& Ihli, T.. (2009). Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept. in Fusion Science and Technology Taylor & Francis Inc, Philadelphia., 56(1), 221-226. https://doi.org/10.13182/FST09-A8906
Cismondi F, Rey J, von der Weth A, Kecskes S, Neuberger H, Ilić M, Bitz O, Boccaccini L, Ihli T. Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept. in Fusion Science and Technology. 2009;56(1):221-226. doi:10.13182/FST09-A8906 .
Cismondi, F., Rey, J., von der Weth, A., Kecskes, S., Neuberger, H., Ilić, Milica, Bitz, O., Boccaccini, L.V., Ihli, T., "Design update and mock-up test strategy for the validation of the eu-hcpb-tbm concept" in Fusion Science and Technology, 56, no. 1 (2009):221-226, https://doi.org/10.13182/FST09-A8906 . .