Pretraživanje
Prikaz rezultata 1-10 od 48
Mock-up testing facilities and qualification strategy for EU ITER TBMs
(Elsevier Science Sa, Lausanne, 2010)
European test blanket modules (TBM) for both European blanket concepts, namely the Helium Cooled Lithium Lead (HCLL) and the Helium Cooled Pebble Bed (HCPB), and their auxiliary systems have been designed in the last years. ...
Failure analysis of the combat jet aircraft rudder shaft
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This paper analyzes failure causes of the combat jet aircraft rudder shaft (RS) which occurred during the flight mission. A finite element method (FEM), utilized to determine the stress state of the RS subjected to hinge ...
Estimation of the number of trays for natural gas triethylene glycol dehydration column
(Elsevier, Amsterdam, 2011)
The paper deals with the tray-to-tray method for determining the required number of trays in columns with intensive entrainment of liquid when the operating line of the "dry working regime" is not straight and with a small ...
Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The supporting truss of the counterweight boom is a vital part of the bucket chain excavator's (BCE) superstructure. The occurrence and propagation of cracks in the supporting truss columns' heads may lead to BCE collapse. ...
HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
(Elsevier Science Sa, Lausanne, 2011)
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first ...
Analysis of welded tensile plates with a surface notch in the weld metal and heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
The behavior of the plates with a surface notch under tensile external loading is experimentally and numerically analyzed. The specimens were made of micro-alloyed steel NIO-MOL 490 K. welded by MAC (CO2) welding method. ...
Load-bearing steel structure diagnostics on bucket wheel excavator, for the purpose of failure prevention
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The appearance of cracks on load-bearing steel structure of compact, hydraulic bucket wheel excavator was a perennial problem. Unfavourable stress concentration, inadequate geometry and structure of materials, inadequate ...
Compressive strains and displacement in a partially dentate lower jaw rehabilitated with two different treatment modalities
(Wiley, Hoboken, 2012)
Background: Understanding of the biomechanical consequences of the stresses generated to the supporting bone during occlusal loading is significant for improving the design and clinical planning process in partial edentulism ...
Failure investigation of the bucket wheel excavator crawler chain link
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The high mobility of open pit machines in heavy duty conditions provides fertile ground for the occurrence of various failures of the traveling mechanisms' vital parts such as chain links. The goal of the study presented ...
Experimental studies on active vibration control of a smart composite beam using a PID controller
(IOP Publishing Ltd, Bristol, 2013)
This paper presents experimental verification of the active vibration control of a smart cantilever composite beam using a PID controller. In order to prevent negative occurrences in the derivative and integral terms in a ...