TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Spasojević Brkić, Vesna
AU  - Đorđević, Dejan
AU  - Brkić, Aleksandar
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3182
AB  - Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto analysis, in aim to mitigate possible risks in production processes. It is based on the facts that key points in the production process indicate some serious oversights (gaps), characterized as errors, which can grow into risky elements that disturb the manufacturing process and final transmitter assembly. In this paper, finalizing and assembling pressure transmitter elements (modules), created by a domestic manufacturer, served as an example for the Gap analysis. Each electronic transmitter is consisted of three modules: measurement cell, mechanical coupling fixture and enclosure containing the electronics and the terminal block box. Through the implementation and assembly of these modules errors (or elements of potential risks) have been identified. Later on, using the Pareto chart, it has been seen that 80% of errors made during the transmitter manufacturing process have occurred while implementing the first and the third transmitter module. Also, by analyzing the collected gaps, it has been concluded that the critical ones happen while using the existing technology and engaging workforce. In order to eliminate the above-mentioned errors, this paper decidedly presents the Gap analysis steps which should be followed, so the transmitter manufacturing process would be improved in terms of quality. Similar methodology could be applied to other products and processes.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Gap analysis and risk occurrence on the example of pressure transmitter's production processes
EP  - 598
IS  - 4
SP  - 590
VL  - 17
DO  - 10.5937/jaes17-23443
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Spasojević Brkić, Vesna and Đorđević, Dejan and Brkić, Aleksandar",
year = "2019",
abstract = "Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto analysis, in aim to mitigate possible risks in production processes. It is based on the facts that key points in the production process indicate some serious oversights (gaps), characterized as errors, which can grow into risky elements that disturb the manufacturing process and final transmitter assembly. In this paper, finalizing and assembling pressure transmitter elements (modules), created by a domestic manufacturer, served as an example for the Gap analysis. Each electronic transmitter is consisted of three modules: measurement cell, mechanical coupling fixture and enclosure containing the electronics and the terminal block box. Through the implementation and assembly of these modules errors (or elements of potential risks) have been identified. Later on, using the Pareto chart, it has been seen that 80% of errors made during the transmitter manufacturing process have occurred while implementing the first and the third transmitter module. Also, by analyzing the collected gaps, it has been concluded that the critical ones happen while using the existing technology and engaging workforce. In order to eliminate the above-mentioned errors, this paper decidedly presents the Gap analysis steps which should be followed, so the transmitter manufacturing process would be improved in terms of quality. Similar methodology could be applied to other products and processes.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Gap analysis and risk occurrence on the example of pressure transmitter's production processes",
pages = "598-590",
number = "4",
volume = "17",
doi = "10.5937/jaes17-23443"
}

Vorkapić, M., Ćoćkalo, D., Spasojević Brkić, V., Đorđević, D.,& Brkić, A.. (2019). Gap analysis and risk occurrence on the example of pressure transmitter's production processes. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 17(4), 590-598.
https://doi.org/10.5937/jaes17-23443

Vorkapić M, Ćoćkalo D, Spasojević Brkić V, Đorđević D, Brkić A. Gap analysis and risk occurrence on the example of pressure transmitter's production processes. in Journal of Applied Engineering Science. 2019;17(4):590-598.
doi:10.5937/jaes17-23443 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Spasojević Brkić, Vesna, Đorđević, Dejan, Brkić, Aleksandar, "Gap analysis and risk occurrence on the example of pressure transmitter's production processes" in Journal of Applied Engineering Science, 17, no. 4 (2019):590-598,
https://doi.org/10.5937/jaes17-23443 . .

TY  - JOUR
AU  - Stanisavljev, Sanja
AU  - Ćoćkalo, Dragan
AU  - Klarin, Milivoj
AU  - Spasojević Brkić, Vesna
AU  - Đorđević, Dejan
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2248
AB  - The paper presents an original method of determining the elements of the production cycle time by using the modified work sampling method applied to a textile factory. It is shown that the movement of the elements of time can be viewed as a process and in the mathematical sense can establish control limits of error of +/- 3 SD. The mean time of the production cycle of the groups created by the number of pieces in the series t(pcu) moving the hyperbolic function, which has the asymptote c, a function of the form (t) over bar (pcu) = c + b/log n, where all groups of the production cycle in the mathematical sense do not act like strata but are function tpci, related to technology and deterministic factors of the production series.
PB  - Inst Chemical Fibres, Lodz
T2  - Fibres & Textiles in Eastern Europe
T1  - Stohastic Model to Determine the Elements of the Production Cycle Time: Case of Serbian Textile Industry
EP  - 29
IS  - 5
SP  - 23
VL  - 23
DO  - 10.5604/12303666.1161752
ER  - 

@article{
author = "Stanisavljev, Sanja and Ćoćkalo, Dragan and Klarin, Milivoj and Spasojević Brkić, Vesna and Đorđević, Dejan",
year = "2015",
abstract = "The paper presents an original method of determining the elements of the production cycle time by using the modified work sampling method applied to a textile factory. It is shown that the movement of the elements of time can be viewed as a process and in the mathematical sense can establish control limits of error of +/- 3 SD. The mean time of the production cycle of the groups created by the number of pieces in the series t(pcu) moving the hyperbolic function, which has the asymptote c, a function of the form (t) over bar (pcu) = c + b/log n, where all groups of the production cycle in the mathematical sense do not act like strata but are function tpci, related to technology and deterministic factors of the production series.",
publisher = "Inst Chemical Fibres, Lodz",
journal = "Fibres & Textiles in Eastern Europe",
title = "Stohastic Model to Determine the Elements of the Production Cycle Time: Case of Serbian Textile Industry",
pages = "29-23",
number = "5",
volume = "23",
doi = "10.5604/12303666.1161752"
}

Stanisavljev, S., Ćoćkalo, D., Klarin, M., Spasojević Brkić, V.,& Đorđević, D.. (2015). Stohastic Model to Determine the Elements of the Production Cycle Time: Case of Serbian Textile Industry. in Fibres & Textiles in Eastern Europe
Inst Chemical Fibres, Lodz., 23(5), 23-29.
https://doi.org/10.5604/12303666.1161752

Stanisavljev S, Ćoćkalo D, Klarin M, Spasojević Brkić V, Đorđević D. Stohastic Model to Determine the Elements of the Production Cycle Time: Case of Serbian Textile Industry. in Fibres & Textiles in Eastern Europe. 2015;23(5):23-29.
doi:10.5604/12303666.1161752 .

Stanisavljev, Sanja, Ćoćkalo, Dragan, Klarin, Milivoj, Spasojević Brkić, Vesna, Đorđević, Dejan, "Stohastic Model to Determine the Elements of the Production Cycle Time: Case of Serbian Textile Industry" in Fibres & Textiles in Eastern Europe, 23, no. 5 (2015):23-29,
https://doi.org/10.5604/12303666.1161752 . .

TY  - JOUR
AU  - Stanisavljev, Sanja
AU  - Klarin, Milivoj
AU  - Spasojević Brkić, Vesna
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2242
AB  - This paper presents a model for the stochastic determination of the elements of production cycle time is proposed and experimentally verified in this survey. The originality of the model is reflected in the idea of using a work sampling model to monitor the production cycle, as one of the most significant indicators of production effectiveness and efficiency, instead of applying classical methods. Based on experimental investigations in this paper has been proved that in the practice of small and medium-sized enterprises with serial production it is possible to design and apply a very simple but accurate enough stochastic model to determine the elements of working cycle time and in this way optimize the duration of production cycle time. Proposed stochastic model uses mean value calculations to establish control limits on 3 standard deviations for the individual elements of working time and thus to master the process. It is proposed that further investigations should focus on the application and testing of the model in other types of production, for example, assembly and the like and also at the problem of reducing the elements of transport time. The model was applied and involved a larger number of Serbian enterprises. The results obtained for two characteristic textile enterprises will be presented in this paper.
PB  - Ege Universitesi, Bornova-Izmir
T2  - Tekstil Ve Konfeksiyon
T1  - A stochastic model to determine the elements of production cycle time in textile industry in Serbia
EP  - 200
IS  - 3
SP  - 194
VL  - 25
UR  - https://hdl.handle.net/21.15107/rcub_machinery_2242
ER  - 

@article{
author = "Stanisavljev, Sanja and Klarin, Milivoj and Spasojević Brkić, Vesna and Ćoćkalo, Dragan and Đorđević, Dejan",
year = "2015",
abstract = "This paper presents a model for the stochastic determination of the elements of production cycle time is proposed and experimentally verified in this survey. The originality of the model is reflected in the idea of using a work sampling model to monitor the production cycle, as one of the most significant indicators of production effectiveness and efficiency, instead of applying classical methods. Based on experimental investigations in this paper has been proved that in the practice of small and medium-sized enterprises with serial production it is possible to design and apply a very simple but accurate enough stochastic model to determine the elements of working cycle time and in this way optimize the duration of production cycle time. Proposed stochastic model uses mean value calculations to establish control limits on 3 standard deviations for the individual elements of working time and thus to master the process. It is proposed that further investigations should focus on the application and testing of the model in other types of production, for example, assembly and the like and also at the problem of reducing the elements of transport time. The model was applied and involved a larger number of Serbian enterprises. The results obtained for two characteristic textile enterprises will be presented in this paper.",
publisher = "Ege Universitesi, Bornova-Izmir",
journal = "Tekstil Ve Konfeksiyon",
title = "A stochastic model to determine the elements of production cycle time in textile industry in Serbia",
pages = "200-194",
number = "3",
volume = "25",
url = "https://hdl.handle.net/21.15107/rcub_machinery_2242"
}

Stanisavljev, S., Klarin, M., Spasojević Brkić, V., Ćoćkalo, D.,& Đorđević, D.. (2015). A stochastic model to determine the elements of production cycle time in textile industry in Serbia. in Tekstil Ve Konfeksiyon
Ege Universitesi, Bornova-Izmir., 25(3), 194-200.
https://hdl.handle.net/21.15107/rcub_machinery_2242

Stanisavljev S, Klarin M, Spasojević Brkić V, Ćoćkalo D, Đorđević D. A stochastic model to determine the elements of production cycle time in textile industry in Serbia. in Tekstil Ve Konfeksiyon. 2015;25(3):194-200.
https://hdl.handle.net/21.15107/rcub_machinery_2242 .

Stanisavljev, Sanja, Klarin, Milivoj, Spasojević Brkić, Vesna, Ćoćkalo, Dragan, Đorđević, Dejan, "A stochastic model to determine the elements of production cycle time in textile industry in Serbia" in Tekstil Ve Konfeksiyon, 25, no. 3 (2015):194-200,
https://hdl.handle.net/21.15107/rcub_machinery_2242 .

TY  - JOUR
AU  - Ćoćkalo, Dragan
AU  - Stanisavljev, Sanja
AU  - Đorđević, Dejan
AU  - Klarin, Milivoj
AU  - Brkić, Aleksandar
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1967
AB  - A model for the stochastic determination of the elements of production cycle time is proposed and experimentally verified in this survey. The originality of the model as reflected in the idea of using a work sampling model to monitor the production cycle is one of the most significant indicators of production effectiveness and efficiency, instead of applying classical methods. It has been experimentally proved that for a corresponding representative set the elements of working time range according to normal distribution law and that, dynamically viewed, it is possible to use mean value calculations to establish control limits on three standard deviations for the individual elements of working time and thus to master the process. Based on our experimental investigations, it has been proved that in the practice of small and medium-sized enterprises with serial production it is possible to design and apply a very simple but accurate enough stochastic model to determine the elements of working cycle time and in this way optimize the duration of production cycle time.
PB  - Canadian Society for Mechanical Engineering
T2  - Transactions of the Canadian Society for Mechanical Engineering
T1  - Determination of the elements of production cycle time in serial production: the Serbian case
EP  - 304
IS  - 3
SP  - 289
VL  - 38
DO  - 10.1139/tcsme-2014-0021
ER  - 

@article{
author = "Ćoćkalo, Dragan and Stanisavljev, Sanja and Đorđević, Dejan and Klarin, Milivoj and Brkić, Aleksandar",
year = "2014",
abstract = "A model for the stochastic determination of the elements of production cycle time is proposed and experimentally verified in this survey. The originality of the model as reflected in the idea of using a work sampling model to monitor the production cycle is one of the most significant indicators of production effectiveness and efficiency, instead of applying classical methods. It has been experimentally proved that for a corresponding representative set the elements of working time range according to normal distribution law and that, dynamically viewed, it is possible to use mean value calculations to establish control limits on three standard deviations for the individual elements of working time and thus to master the process. Based on our experimental investigations, it has been proved that in the practice of small and medium-sized enterprises with serial production it is possible to design and apply a very simple but accurate enough stochastic model to determine the elements of working cycle time and in this way optimize the duration of production cycle time.",
publisher = "Canadian Society for Mechanical Engineering",
journal = "Transactions of the Canadian Society for Mechanical Engineering",
title = "Determination of the elements of production cycle time in serial production: the Serbian case",
pages = "304-289",
number = "3",
volume = "38",
doi = "10.1139/tcsme-2014-0021"
}

Ćoćkalo, D., Stanisavljev, S., Đorđević, D., Klarin, M.,& Brkić, A.. (2014). Determination of the elements of production cycle time in serial production: the Serbian case. in Transactions of the Canadian Society for Mechanical Engineering
Canadian Society for Mechanical Engineering., 38(3), 289-304.
https://doi.org/10.1139/tcsme-2014-0021

Ćoćkalo D, Stanisavljev S, Đorđević D, Klarin M, Brkić A. Determination of the elements of production cycle time in serial production: the Serbian case. in Transactions of the Canadian Society for Mechanical Engineering. 2014;38(3):289-304.
doi:10.1139/tcsme-2014-0021 .

Ćoćkalo, Dragan, Stanisavljev, Sanja, Đorđević, Dejan, Klarin, Milivoj, Brkić, Aleksandar, "Determination of the elements of production cycle time in serial production: the Serbian case" in Transactions of the Canadian Society for Mechanical Engineering, 38, no. 3 (2014):289-304,
https://doi.org/10.1139/tcsme-2014-0021 . .

TY  - JOUR
AU  - Ćoćkalo, Dragan
AU  - Vunjak, Nenad
AU  - Đorđević, Dejan
AU  - Besić, Carisa
AU  - Spasojević Brkić, Vesna
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1603
AB  - Conceptually, the objective of a wider analyses in this paper are the key strategic objectives of a company and achieving and understanding the optimum level of customer satisfaction. Theoretically-based model for providing customers' satisfaction in the form of business strategy is harmonized with the following important concepts: quality management, business excellence and relationship marketing. The research (survey) which was carried out in companies and among the experts, on the territory of the Republic of Serbia, indicated justifiability of this model and its structure. Totally 600 organizations (all sizes; all ISO 9001 standard certified) and about 100 experts (from the field of interest) were included in the research the call for participation accepted 84 companies and 37 experts.
T2  - Technics Technologies Education Management
T1  - Customer satisfaction focused business strategy: An exploratory study in Serbian economy
EP  - 195
IS  - 1
SP  - 186
VL  - 7
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1603
ER  - 

@article{
author = "Ćoćkalo, Dragan and Vunjak, Nenad and Đorđević, Dejan and Besić, Carisa and Spasojević Brkić, Vesna",
year = "2012",
abstract = "Conceptually, the objective of a wider analyses in this paper are the key strategic objectives of a company and achieving and understanding the optimum level of customer satisfaction. Theoretically-based model for providing customers' satisfaction in the form of business strategy is harmonized with the following important concepts: quality management, business excellence and relationship marketing. The research (survey) which was carried out in companies and among the experts, on the territory of the Republic of Serbia, indicated justifiability of this model and its structure. Totally 600 organizations (all sizes; all ISO 9001 standard certified) and about 100 experts (from the field of interest) were included in the research the call for participation accepted 84 companies and 37 experts.",
journal = "Technics Technologies Education Management",
title = "Customer satisfaction focused business strategy: An exploratory study in Serbian economy",
pages = "195-186",
number = "1",
volume = "7",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1603"
}

Ćoćkalo, D., Vunjak, N., Đorđević, D., Besić, C.,& Spasojević Brkić, V.. (2012). Customer satisfaction focused business strategy: An exploratory study in Serbian economy. in Technics Technologies Education Management, 7(1), 186-195.
https://hdl.handle.net/21.15107/rcub_machinery_1603

Ćoćkalo D, Vunjak N, Đorđević D, Besić C, Spasojević Brkić V. Customer satisfaction focused business strategy: An exploratory study in Serbian economy. in Technics Technologies Education Management. 2012;7(1):186-195.
https://hdl.handle.net/21.15107/rcub_machinery_1603 .

Ćoćkalo, Dragan, Vunjak, Nenad, Đorđević, Dejan, Besić, Carisa, Spasojević Brkić, Vesna, "Customer satisfaction focused business strategy: An exploratory study in Serbian economy" in Technics Technologies Education Management, 7, no. 1 (2012):186-195,
https://hdl.handle.net/21.15107/rcub_machinery_1603 .

TY  - JOUR
AU  - Ćoćkalo, Dragan
AU  - Đorđević, D.
AU  - Sajfert, Zvonko
AU  - Spasojević Brkić, Vesna
AU  - Nikolić, M.
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1544
AB  - The objective of this paper is to present the research results in modelling the process for providing satisfaction of company's customers and their requirements - the key elements of the model which is the final result of the research. This model implies a process approach and acceptable marketing research in the beginning, as well as appropriate evaluation at the end. The model is harmonised with: the quality management concept, the business excellence concept, and the relationship marketing concept. To prove the justifiability of the requirements, elements and activities in the theoretic model, postulated on the basis of researching available literature and research in this sphere, the research included an interview with 84 companies (manufacturing and services), certified according to ISO 9001:2000, registered and active in Serbia (as the primary group) and 37 experts from the relevant field of work as the control group of the research.
PB  - Inderscience Publishers
T2  - International Journal of Services, Technology and Management
T1  - The elements of customer satisfaction model in Serbian conditions
EP  - 108
IS  - 1
SP  - 87
VL  - 17
DO  - 10.1504/IJSTM.2012.048026
ER  - 

@article{
author = "Ćoćkalo, Dragan and Đorđević, D. and Sajfert, Zvonko and Spasojević Brkić, Vesna and Nikolić, M.",
year = "2012",
abstract = "The objective of this paper is to present the research results in modelling the process for providing satisfaction of company's customers and their requirements - the key elements of the model which is the final result of the research. This model implies a process approach and acceptable marketing research in the beginning, as well as appropriate evaluation at the end. The model is harmonised with: the quality management concept, the business excellence concept, and the relationship marketing concept. To prove the justifiability of the requirements, elements and activities in the theoretic model, postulated on the basis of researching available literature and research in this sphere, the research included an interview with 84 companies (manufacturing and services), certified according to ISO 9001:2000, registered and active in Serbia (as the primary group) and 37 experts from the relevant field of work as the control group of the research.",
publisher = "Inderscience Publishers",
journal = "International Journal of Services, Technology and Management",
title = "The elements of customer satisfaction model in Serbian conditions",
pages = "108-87",
number = "1",
volume = "17",
doi = "10.1504/IJSTM.2012.048026"
}

Ćoćkalo, D., Đorđević, D., Sajfert, Z., Spasojević Brkić, V.,& Nikolić, M.. (2012). The elements of customer satisfaction model in Serbian conditions. in International Journal of Services, Technology and Management
Inderscience Publishers., 17(1), 87-108.
https://doi.org/10.1504/IJSTM.2012.048026

Ćoćkalo D, Đorđević D, Sajfert Z, Spasojević Brkić V, Nikolić M. The elements of customer satisfaction model in Serbian conditions. in International Journal of Services, Technology and Management. 2012;17(1):87-108.
doi:10.1504/IJSTM.2012.048026 .

Ćoćkalo, Dragan, Đorđević, D., Sajfert, Zvonko, Spasojević Brkić, Vesna, Nikolić, M., "The elements of customer satisfaction model in Serbian conditions" in International Journal of Services, Technology and Management, 17, no. 1 (2012):87-108,
https://doi.org/10.1504/IJSTM.2012.048026 . .

TY  - JOUR
AU  - Klarin, Milivoj
AU  - Spasojević Brkić, Vesna
AU  - Sajfert, Zvonko
AU  - Đorđević, D. B.
AU  - Nikolić, M. S.
AU  - Ćoćkalo, Dragan
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1164
AB  - This paper discusses a new way of modelling the width of the space that accommodates the drivers of passenger vehicles. The fact that there is a more or less fixed zero point, which is the origin of the coordinates of the man-vehicle system makes it possible to determine the mechanical-mathematical co-dependence in this system more accurately. The space is determined by taking extreme pairs of the dimensions and a series of anthropometric measurements to which the vehicle needs to be adjusted as the measurement limits. These were determined by analysis which includes both the theory of mechanisms and vehicle mechanics. In this way the method of adapting the vehicle to accommodate a range from the 5th-percentile woman to the 95th-percentile man has finally been surpassed. The paper demonstrates a methodology for designing the interior space of a passenger vehicle based on the fact that, in a range of anthropometric measurements of equal total lengths, each measurement has segments of different lengths, because people with the same leg lengths have different upper- and lower-leg lengths. Therefore the interior space of the vehicle is designed to accommodate extreme measurements and to allow for limitations caused by movement and the physical laws derived from seeing the anthropometric measurement mechanism as a mechanical mechanism. The paper offers a design for the space behind the windscreen, the position of the steering wheel, and the position of the foot controls together with the total space which the driver occupies, primarily from the aspect of anthropometric limitations, concluding that the maximum width for accommodation of the driver at the lowest level of a seat along the x axis is 169 mm, and along the y axis is 1013 mm.
PB  - Sage Publications Ltd, London
T2  - Proceedings of The Institution of Mechanical Engineers Part D-Journal of Automobile Engineering
T1  - Determining the width of the optimal space needed to accommodate the drivers of passenger vehicles using the analogy of anthropometric measurement dynamics and mechanical mechanisms
EP  - 440
IS  - D4
SP  - 425
VL  - 225
DO  - 10.1177/2041299110393194
ER  - 

@article{
author = "Klarin, Milivoj and Spasojević Brkić, Vesna and Sajfert, Zvonko and Đorđević, D. B. and Nikolić, M. S. and Ćoćkalo, Dragan",
year = "2011",
abstract = "This paper discusses a new way of modelling the width of the space that accommodates the drivers of passenger vehicles. The fact that there is a more or less fixed zero point, which is the origin of the coordinates of the man-vehicle system makes it possible to determine the mechanical-mathematical co-dependence in this system more accurately. The space is determined by taking extreme pairs of the dimensions and a series of anthropometric measurements to which the vehicle needs to be adjusted as the measurement limits. These were determined by analysis which includes both the theory of mechanisms and vehicle mechanics. In this way the method of adapting the vehicle to accommodate a range from the 5th-percentile woman to the 95th-percentile man has finally been surpassed. The paper demonstrates a methodology for designing the interior space of a passenger vehicle based on the fact that, in a range of anthropometric measurements of equal total lengths, each measurement has segments of different lengths, because people with the same leg lengths have different upper- and lower-leg lengths. Therefore the interior space of the vehicle is designed to accommodate extreme measurements and to allow for limitations caused by movement and the physical laws derived from seeing the anthropometric measurement mechanism as a mechanical mechanism. The paper offers a design for the space behind the windscreen, the position of the steering wheel, and the position of the foot controls together with the total space which the driver occupies, primarily from the aspect of anthropometric limitations, concluding that the maximum width for accommodation of the driver at the lowest level of a seat along the x axis is 169 mm, and along the y axis is 1013 mm.",
publisher = "Sage Publications Ltd, London",
journal = "Proceedings of The Institution of Mechanical Engineers Part D-Journal of Automobile Engineering",
title = "Determining the width of the optimal space needed to accommodate the drivers of passenger vehicles using the analogy of anthropometric measurement dynamics and mechanical mechanisms",
pages = "440-425",
number = "D4",
volume = "225",
doi = "10.1177/2041299110393194"
}

Klarin, M., Spasojević Brkić, V., Sajfert, Z., Đorđević, D. B., Nikolić, M. S.,& Ćoćkalo, D.. (2011). Determining the width of the optimal space needed to accommodate the drivers of passenger vehicles using the analogy of anthropometric measurement dynamics and mechanical mechanisms. in Proceedings of The Institution of Mechanical Engineers Part D-Journal of Automobile Engineering
Sage Publications Ltd, London., 225(D4), 425-440.
https://doi.org/10.1177/2041299110393194

Klarin M, Spasojević Brkić V, Sajfert Z, Đorđević DB, Nikolić MS, Ćoćkalo D. Determining the width of the optimal space needed to accommodate the drivers of passenger vehicles using the analogy of anthropometric measurement dynamics and mechanical mechanisms. in Proceedings of The Institution of Mechanical Engineers Part D-Journal of Automobile Engineering. 2011;225(D4):425-440.
doi:10.1177/2041299110393194 .

Klarin, Milivoj, Spasojević Brkić, Vesna, Sajfert, Zvonko, Đorđević, D. B., Nikolić, M. S., Ćoćkalo, Dragan, "Determining the width of the optimal space needed to accommodate the drivers of passenger vehicles using the analogy of anthropometric measurement dynamics and mechanical mechanisms" in Proceedings of The Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 225, no. D4 (2011):425-440,
https://doi.org/10.1177/2041299110393194 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Klarin, Milivoj
AU  - Radojičić, Miroslav
AU  - Ćoćkalo, Dragan
AU  - Vesić-Vasović, Jasmine
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1338
AB  - The study examines the impact of strategic factors on quality management in industrial companies. Basically, it was hypothesized that QM concept is not universally applicable, but strategy-dependent. Research comprised the sample of 111 Serbian industrial companies. A model is assumed for relation between strategy and QM critical factors; it is assumed that it is mediated through management style and employees behavior. Research instrument was developed, and preliminary data analysis was carried out to arrive at final model of relation between strategic, management style, employees behavior and QM factors. Final model data were subjected for reliability and validity analysis, so as to perform structural equation modeling, by means of which pathway and path coefficients in the model were determined. Context-dependent nature of QM concept has been proved by confirming direct impact of employees behavior, and by confirming accessory hypotheses for indirect impact of strategic and management style factors in the model. Adequate model of statistically significant relations was obtained, which, being a newly developed theoretical framework, provides inferring a range of new and practically checkable conclusions, as well as recommendations for applying QM in Serbian industrial companies. Strategy with risk taking elements is not appropriate for QM practice, while appropriate strategy elements include innovations, cost minimization and analytical elements, that exert influence on proactivity, long term planning and motivating as dimensions of management style. Employees behavior with its dimensions such as proactivity, good interpersonal relations and spirit of collectivism is dependant on management style and exerts influence on concept of QM.
T2  - Technics Technologies Education Management
T1  - Strategy and quality management: an empirical study of Serbian industrial companies
EP  - 317
IS  - 2
SP  - 308
VL  - 6
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1338
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Klarin, Milivoj and Radojičić, Miroslav and Ćoćkalo, Dragan and Vesić-Vasović, Jasmine",
year = "2011",
abstract = "The study examines the impact of strategic factors on quality management in industrial companies. Basically, it was hypothesized that QM concept is not universally applicable, but strategy-dependent. Research comprised the sample of 111 Serbian industrial companies. A model is assumed for relation between strategy and QM critical factors; it is assumed that it is mediated through management style and employees behavior. Research instrument was developed, and preliminary data analysis was carried out to arrive at final model of relation between strategic, management style, employees behavior and QM factors. Final model data were subjected for reliability and validity analysis, so as to perform structural equation modeling, by means of which pathway and path coefficients in the model were determined. Context-dependent nature of QM concept has been proved by confirming direct impact of employees behavior, and by confirming accessory hypotheses for indirect impact of strategic and management style factors in the model. Adequate model of statistically significant relations was obtained, which, being a newly developed theoretical framework, provides inferring a range of new and practically checkable conclusions, as well as recommendations for applying QM in Serbian industrial companies. Strategy with risk taking elements is not appropriate for QM practice, while appropriate strategy elements include innovations, cost minimization and analytical elements, that exert influence on proactivity, long term planning and motivating as dimensions of management style. Employees behavior with its dimensions such as proactivity, good interpersonal relations and spirit of collectivism is dependant on management style and exerts influence on concept of QM.",
journal = "Technics Technologies Education Management",
title = "Strategy and quality management: an empirical study of Serbian industrial companies",
pages = "317-308",
number = "2",
volume = "6",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1338"
}

Spasojević Brkić, V., Klarin, M., Radojičić, M., Ćoćkalo, D.,& Vesić-Vasović, J.. (2011). Strategy and quality management: an empirical study of Serbian industrial companies. in Technics Technologies Education Management, 6(2), 308-317.
https://hdl.handle.net/21.15107/rcub_machinery_1338

Spasojević Brkić V, Klarin M, Radojičić M, Ćoćkalo D, Vesić-Vasović J. Strategy and quality management: an empirical study of Serbian industrial companies. in Technics Technologies Education Management. 2011;6(2):308-317.
https://hdl.handle.net/21.15107/rcub_machinery_1338 .

Spasojević Brkić, Vesna, Klarin, Milivoj, Radojičić, Miroslav, Ćoćkalo, Dragan, Vesić-Vasović, Jasmine, "Strategy and quality management: an empirical study of Serbian industrial companies" in Technics Technologies Education Management, 6, no. 2 (2011):308-317,
https://hdl.handle.net/21.15107/rcub_machinery_1338 .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Klarin, Milivoj
AU  - Brkić, Aleksandar
AU  - Ćoćkalo, Dragan
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1254
AB  - Predmet ovog rada je statistička ocena značajnih dimenzija strategije u domaćim industrijskim preduzećima, koja je sprovedena na uzorku od 111 preduzeća. U radu je, na osnovu preporuka relevantne literature, izvršeno istraživanje kritičnih dimenzija strategije kao koncepta analizom pouzdanosti i faktorskom analizom. pouzdanost je procenjena na osnovu izračunatog koeficijenta Cronbach a. Eksplorativna faktorska analiza sprovedena je metodom glavnih komponenata. Dobijene preporuke o značajnim dimenzijama strategije ukazuju na činjenicu da su elementi rizikovanja u okviru strategije nižeg značaja od ostalih, tako da je preporuka domaćim industrijskim preduzećima da u svojoj strategiji imaju elemente diferencijacije i inoviranja proizvoda, minimiziranja troškova, i analize proizvoda, tržišta i potrošača. Značajniji elementi strategije su diferencijacija i inoviranje proizvoda, minimiziranje troškova, i analiza proizvoda, tržišta i potrošača, jer je izbacivanjem dimenzije strategije rizikovanja došlo do povećanja koeficijenta pouzdanosti sa vrednosti 0.66 na vrednost 0.69. Elementi rizikovanju mogu biti sadržani u strategiji (vrednost je veća od 0.6), iako nisu jednakog značaja kao ostali elementi (koji smanjuju koeficijent pouzdanosti kada su izbačeni).
AB  - The subject of this paper is statistical assessment of significant dimensions of strategy in domestic industrial enterprises, and it is done on the sample of 111 enterprises. On the basis of relevant literature, experimental survey of critical dimensions of strategy as the concept is conducted through reliability analysis and exploratory factor analysis. Scale reliability of investigated constructs was evaluated through calculation of Cronbach coefficient. Explorative factor analysis is conducted by principal components method. Received recommendations on important dimensions of the strategy point to the fact that the elements in the strategy of risking have lower significance than others, so that the recommendations for domestic industrial enterprises are to have elements in its strategy: differentiation and innovation of products, minimizing costs, and analysis of products, markets and consumers. More significant strategy elements are differentiation and innovation of products, minimizing costs, and analysis of products, markets and consumers, because the dimensions of strategy risking dropping give an increase of reliability coefficient from a value of at a= 0.66 to a = 0.69 value. Elements of risk-taking may be contained in the strategy (the value is greater than 0.6), although not of equal importance as other components (which reduce the coefficient of reliability when they are thrown out). .
PB  - Ekonomski institut, Beograd
T2  - Industrija
T1  - Dimenzije strategije u industrijskim preduzećima Srbije
T1  - Dimensions of strategy in Serbian industrial enterprises
EP  - 165
IS  - 1
SP  - 157
VL  - 39
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1254
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Klarin, Milivoj and Brkić, Aleksandar and Ćoćkalo, Dragan",
year = "2011",
abstract = "Predmet ovog rada je statistička ocena značajnih dimenzija strategije u domaćim industrijskim preduzećima, koja je sprovedena na uzorku od 111 preduzeća. U radu je, na osnovu preporuka relevantne literature, izvršeno istraživanje kritičnih dimenzija strategije kao koncepta analizom pouzdanosti i faktorskom analizom. pouzdanost je procenjena na osnovu izračunatog koeficijenta Cronbach a. Eksplorativna faktorska analiza sprovedena je metodom glavnih komponenata. Dobijene preporuke o značajnim dimenzijama strategije ukazuju na činjenicu da su elementi rizikovanja u okviru strategije nižeg značaja od ostalih, tako da je preporuka domaćim industrijskim preduzećima da u svojoj strategiji imaju elemente diferencijacije i inoviranja proizvoda, minimiziranja troškova, i analize proizvoda, tržišta i potrošača. Značajniji elementi strategije su diferencijacija i inoviranje proizvoda, minimiziranje troškova, i analiza proizvoda, tržišta i potrošača, jer je izbacivanjem dimenzije strategije rizikovanja došlo do povećanja koeficijenta pouzdanosti sa vrednosti 0.66 na vrednost 0.69. Elementi rizikovanju mogu biti sadržani u strategiji (vrednost je veća od 0.6), iako nisu jednakog značaja kao ostali elementi (koji smanjuju koeficijent pouzdanosti kada su izbačeni)., The subject of this paper is statistical assessment of significant dimensions of strategy in domestic industrial enterprises, and it is done on the sample of 111 enterprises. On the basis of relevant literature, experimental survey of critical dimensions of strategy as the concept is conducted through reliability analysis and exploratory factor analysis. Scale reliability of investigated constructs was evaluated through calculation of Cronbach coefficient. Explorative factor analysis is conducted by principal components method. Received recommendations on important dimensions of the strategy point to the fact that the elements in the strategy of risking have lower significance than others, so that the recommendations for domestic industrial enterprises are to have elements in its strategy: differentiation and innovation of products, minimizing costs, and analysis of products, markets and consumers. More significant strategy elements are differentiation and innovation of products, minimizing costs, and analysis of products, markets and consumers, because the dimensions of strategy risking dropping give an increase of reliability coefficient from a value of at a= 0.66 to a = 0.69 value. Elements of risk-taking may be contained in the strategy (the value is greater than 0.6), although not of equal importance as other components (which reduce the coefficient of reliability when they are thrown out). .",
publisher = "Ekonomski institut, Beograd",
journal = "Industrija",
title = "Dimenzije strategije u industrijskim preduzećima Srbije, Dimensions of strategy in Serbian industrial enterprises",
pages = "165-157",
number = "1",
volume = "39",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1254"
}

Spasojević Brkić, V., Klarin, M., Brkić, A.,& Ćoćkalo, D.. (2011). Dimenzije strategije u industrijskim preduzećima Srbije. in Industrija
Ekonomski institut, Beograd., 39(1), 157-165.
https://hdl.handle.net/21.15107/rcub_machinery_1254

Spasojević Brkić V, Klarin M, Brkić A, Ćoćkalo D. Dimenzije strategije u industrijskim preduzećima Srbije. in Industrija. 2011;39(1):157-165.
https://hdl.handle.net/21.15107/rcub_machinery_1254 .

Spasojević Brkić, Vesna, Klarin, Milivoj, Brkić, Aleksandar, Ćoćkalo, Dragan, "Dimenzije strategije u industrijskim preduzećima Srbije" in Industrija, 39, no. 1 (2011):157-165,
https://hdl.handle.net/21.15107/rcub_machinery_1254 .

TY  - JOUR
AU  - Nikolić, Milan
AU  - Savić, Mirko
AU  - Ćoćkalo, Dragan
AU  - Spasojević Brkić, Vesna
AU  - Ivin, Dragica
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1214
AB  - This study presents the research results whose aim was to examine and define dependences and the impact of public relations on business effects (economic indices are taken as representatives of business effects). Serbian companies were the object of this research. The data were collected by polling 100 managers from 100 companies. Multivariate regression and correlation were applied in order to determine the observed dependences. The research results confirm the existence of a significant direct relation between public relations and economic indices.
PB  - Elsevier Science Inc, New York
T2  - Public Relations Review
T1  - The impact of Serbian public relations on economic indices
EP  - 335
IS  - 3
SP  - 332
VL  - 37
DO  - 10.1016/j.pubrev.2011.04.004
ER  - 

@article{
author = "Nikolić, Milan and Savić, Mirko and Ćoćkalo, Dragan and Spasojević Brkić, Vesna and Ivin, Dragica",
year = "2011",
abstract = "This study presents the research results whose aim was to examine and define dependences and the impact of public relations on business effects (economic indices are taken as representatives of business effects). Serbian companies were the object of this research. The data were collected by polling 100 managers from 100 companies. Multivariate regression and correlation were applied in order to determine the observed dependences. The research results confirm the existence of a significant direct relation between public relations and economic indices.",
publisher = "Elsevier Science Inc, New York",
journal = "Public Relations Review",
title = "The impact of Serbian public relations on economic indices",
pages = "335-332",
number = "3",
volume = "37",
doi = "10.1016/j.pubrev.2011.04.004"
}

Nikolić, M., Savić, M., Ćoćkalo, D., Spasojević Brkić, V.,& Ivin, D.. (2011). The impact of Serbian public relations on economic indices. in Public Relations Review
Elsevier Science Inc, New York., 37(3), 332-335.
https://doi.org/10.1016/j.pubrev.2011.04.004

Nikolić M, Savić M, Ćoćkalo D, Spasojević Brkić V, Ivin D. The impact of Serbian public relations on economic indices. in Public Relations Review. 2011;37(3):332-335.
doi:10.1016/j.pubrev.2011.04.004 .

Nikolić, Milan, Savić, Mirko, Ćoćkalo, Dragan, Spasojević Brkić, Vesna, Ivin, Dragica, "The impact of Serbian public relations on economic indices" in Public Relations Review, 37, no. 3 (2011):332-335,
https://doi.org/10.1016/j.pubrev.2011.04.004 . .