TY  - JOUR
AU  - Stanisavljev, Sanja
AU  - Klarin, Milivoj
AU  - Spasojević Brkić, Vesna
AU  - Radojičić, Miroslav
AU  - Vesić-Vasović, Jasmine
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3027
AB  - In the metalwork production a large part of gross domestic product is being achieved by automating the production in large factories, the finalists, but even a larger part comes from subcontractors and companies that have small-scale and mass production of maintenance elements and other services. Therefore, the production with higher degree of stochastics and organization mostly occurs during the production, and it happens, but to a lesser extent, that everything is planned and set in advance, and according to those facts this survey is going to analyze one of the most important production indicators - the production cycle. In this paper we are experimentally demonstrating the original stochastic method of determining 10 different production cycle working hours, and production cycle itself is determined out of factory driving records. The research also enables determining the flow coefficient which represents the function between the size of the series and technological or real time of the production cycle. Within the framework of a broader research we are contributing results of four years long record, from 2011 to 2014 for a large company with high level of organization. The production cycle per years (2011-2014) amounts to 326, 233, 248 and 236 minutes, while the flow coefficient is Kp=(277/x+0.24) the one that enables and experimentally determines optimal series which is in total 9 items for the company in question.
PB  - Univ Osijek, Tech Fac, Slavonski Brod
T2  - Tehnički vjesnik
T1  - Identification of Annual Work Hour Elements in Production Cycle and Experimental Assessment of Flow Coefficient and Optimal Series
EP  - 1528
IS  - 5
SP  - 1523
VL  - 26
DO  - 10.17559/TV-20180214112428
ER  - 

@article{
author = "Stanisavljev, Sanja and Klarin, Milivoj and Spasojević Brkić, Vesna and Radojičić, Miroslav and Vesić-Vasović, Jasmine",
year = "2019",
abstract = "In the metalwork production a large part of gross domestic product is being achieved by automating the production in large factories, the finalists, but even a larger part comes from subcontractors and companies that have small-scale and mass production of maintenance elements and other services. Therefore, the production with higher degree of stochastics and organization mostly occurs during the production, and it happens, but to a lesser extent, that everything is planned and set in advance, and according to those facts this survey is going to analyze one of the most important production indicators - the production cycle. In this paper we are experimentally demonstrating the original stochastic method of determining 10 different production cycle working hours, and production cycle itself is determined out of factory driving records. The research also enables determining the flow coefficient which represents the function between the size of the series and technological or real time of the production cycle. Within the framework of a broader research we are contributing results of four years long record, from 2011 to 2014 for a large company with high level of organization. The production cycle per years (2011-2014) amounts to 326, 233, 248 and 236 minutes, while the flow coefficient is Kp=(277/x+0.24) the one that enables and experimentally determines optimal series which is in total 9 items for the company in question.",
publisher = "Univ Osijek, Tech Fac, Slavonski Brod",
journal = "Tehnički vjesnik",
title = "Identification of Annual Work Hour Elements in Production Cycle and Experimental Assessment of Flow Coefficient and Optimal Series",
pages = "1528-1523",
number = "5",
volume = "26",
doi = "10.17559/TV-20180214112428"
}

Stanisavljev, S., Klarin, M., Spasojević Brkić, V., Radojičić, M.,& Vesić-Vasović, J.. (2019). Identification of Annual Work Hour Elements in Production Cycle and Experimental Assessment of Flow Coefficient and Optimal Series. in Tehnički vjesnik
Univ Osijek, Tech Fac, Slavonski Brod., 26(5), 1523-1528.
https://doi.org/10.17559/TV-20180214112428

Stanisavljev S, Klarin M, Spasojević Brkić V, Radojičić M, Vesić-Vasović J. Identification of Annual Work Hour Elements in Production Cycle and Experimental Assessment of Flow Coefficient and Optimal Series. in Tehnički vjesnik. 2019;26(5):1523-1528.
doi:10.17559/TV-20180214112428 .

Stanisavljev, Sanja, Klarin, Milivoj, Spasojević Brkić, Vesna, Radojičić, Miroslav, Vesić-Vasović, Jasmine, "Identification of Annual Work Hour Elements in Production Cycle and Experimental Assessment of Flow Coefficient and Optimal Series" in Tehnički vjesnik, 26, no. 5 (2019):1523-1528,
https://doi.org/10.17559/TV-20180214112428 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Klarin, Milivoj
AU  - Radojičić, Miroslav
AU  - Ćoćkalo, Dragan
AU  - Vesić-Vasović, Jasmine
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1338
AB  - The study examines the impact of strategic factors on quality management in industrial companies. Basically, it was hypothesized that QM concept is not universally applicable, but strategy-dependent. Research comprised the sample of 111 Serbian industrial companies. A model is assumed for relation between strategy and QM critical factors; it is assumed that it is mediated through management style and employees behavior. Research instrument was developed, and preliminary data analysis was carried out to arrive at final model of relation between strategic, management style, employees behavior and QM factors. Final model data were subjected for reliability and validity analysis, so as to perform structural equation modeling, by means of which pathway and path coefficients in the model were determined. Context-dependent nature of QM concept has been proved by confirming direct impact of employees behavior, and by confirming accessory hypotheses for indirect impact of strategic and management style factors in the model. Adequate model of statistically significant relations was obtained, which, being a newly developed theoretical framework, provides inferring a range of new and practically checkable conclusions, as well as recommendations for applying QM in Serbian industrial companies. Strategy with risk taking elements is not appropriate for QM practice, while appropriate strategy elements include innovations, cost minimization and analytical elements, that exert influence on proactivity, long term planning and motivating as dimensions of management style. Employees behavior with its dimensions such as proactivity, good interpersonal relations and spirit of collectivism is dependant on management style and exerts influence on concept of QM.
T2  - Technics Technologies Education Management
T1  - Strategy and quality management: an empirical study of Serbian industrial companies
EP  - 317
IS  - 2
SP  - 308
VL  - 6
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1338
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Klarin, Milivoj and Radojičić, Miroslav and Ćoćkalo, Dragan and Vesić-Vasović, Jasmine",
year = "2011",
abstract = "The study examines the impact of strategic factors on quality management in industrial companies. Basically, it was hypothesized that QM concept is not universally applicable, but strategy-dependent. Research comprised the sample of 111 Serbian industrial companies. A model is assumed for relation between strategy and QM critical factors; it is assumed that it is mediated through management style and employees behavior. Research instrument was developed, and preliminary data analysis was carried out to arrive at final model of relation between strategic, management style, employees behavior and QM factors. Final model data were subjected for reliability and validity analysis, so as to perform structural equation modeling, by means of which pathway and path coefficients in the model were determined. Context-dependent nature of QM concept has been proved by confirming direct impact of employees behavior, and by confirming accessory hypotheses for indirect impact of strategic and management style factors in the model. Adequate model of statistically significant relations was obtained, which, being a newly developed theoretical framework, provides inferring a range of new and practically checkable conclusions, as well as recommendations for applying QM in Serbian industrial companies. Strategy with risk taking elements is not appropriate for QM practice, while appropriate strategy elements include innovations, cost minimization and analytical elements, that exert influence on proactivity, long term planning and motivating as dimensions of management style. Employees behavior with its dimensions such as proactivity, good interpersonal relations and spirit of collectivism is dependant on management style and exerts influence on concept of QM.",
journal = "Technics Technologies Education Management",
title = "Strategy and quality management: an empirical study of Serbian industrial companies",
pages = "317-308",
number = "2",
volume = "6",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1338"
}

Spasojević Brkić, V., Klarin, M., Radojičić, M., Ćoćkalo, D.,& Vesić-Vasović, J.. (2011). Strategy and quality management: an empirical study of Serbian industrial companies. in Technics Technologies Education Management, 6(2), 308-317.
https://hdl.handle.net/21.15107/rcub_machinery_1338

Spasojević Brkić V, Klarin M, Radojičić M, Ćoćkalo D, Vesić-Vasović J. Strategy and quality management: an empirical study of Serbian industrial companies. in Technics Technologies Education Management. 2011;6(2):308-317.
https://hdl.handle.net/21.15107/rcub_machinery_1338 .

Spasojević Brkić, Vesna, Klarin, Milivoj, Radojičić, Miroslav, Ćoćkalo, Dragan, Vesić-Vasović, Jasmine, "Strategy and quality management: an empirical study of Serbian industrial companies" in Technics Technologies Education Management, 6, no. 2 (2011):308-317,
https://hdl.handle.net/21.15107/rcub_machinery_1338 .

TY  - JOUR
AU  - Radojičić, Miroslav
AU  - Nesić, Zoran
AU  - Vesić-Vasović, Jasmine
AU  - Klarin, Milivoj
AU  - Spasojević Brkić, Vesna
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1337
AB  - This paper describes one approach to optimization of a batch size in industrial production. The paper focuses on the formation of a generally applicable optimization model that allows finding of the most economical size of production batch. Determining of the optimal size of the batch was done by analyzing the cost structure with the requirement for minimizing production costs reduced to a product. The paper illustrates a concrete example of this approach by using the cutting tools production as an example. It demonstrates the importance of the influence of size on the batch production costs reduced to a piece as a product unit. It discusses and explains variations that can occur in these calculations. In addition, it demonstrates the importance of determining the optimal batch size, both in theory and in practice, and then the impact on cost.
T2  - Technics Technologies Education Management
T1  - Model of economic batch size in industrial production
EP  - 280
IS  - 2
SP  - 272
VL  - 6
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1337
ER  - 

@article{
author = "Radojičić, Miroslav and Nesić, Zoran and Vesić-Vasović, Jasmine and Klarin, Milivoj and Spasojević Brkić, Vesna",
year = "2011",
abstract = "This paper describes one approach to optimization of a batch size in industrial production. The paper focuses on the formation of a generally applicable optimization model that allows finding of the most economical size of production batch. Determining of the optimal size of the batch was done by analyzing the cost structure with the requirement for minimizing production costs reduced to a product. The paper illustrates a concrete example of this approach by using the cutting tools production as an example. It demonstrates the importance of the influence of size on the batch production costs reduced to a piece as a product unit. It discusses and explains variations that can occur in these calculations. In addition, it demonstrates the importance of determining the optimal batch size, both in theory and in practice, and then the impact on cost.",
journal = "Technics Technologies Education Management",
title = "Model of economic batch size in industrial production",
pages = "280-272",
number = "2",
volume = "6",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1337"
}

Radojičić, M., Nesić, Z., Vesić-Vasović, J., Klarin, M.,& Spasojević Brkić, V.. (2011). Model of economic batch size in industrial production. in Technics Technologies Education Management, 6(2), 272-280.
https://hdl.handle.net/21.15107/rcub_machinery_1337

Radojičić M, Nesić Z, Vesić-Vasović J, Klarin M, Spasojević Brkić V. Model of economic batch size in industrial production. in Technics Technologies Education Management. 2011;6(2):272-280.
https://hdl.handle.net/21.15107/rcub_machinery_1337 .

Radojičić, Miroslav, Nesić, Zoran, Vesić-Vasović, Jasmine, Klarin, Milivoj, Spasojević Brkić, Vesna, "Model of economic batch size in industrial production" in Technics Technologies Education Management, 6, no. 2 (2011):272-280,
https://hdl.handle.net/21.15107/rcub_machinery_1337 .

TY  - JOUR
AU  - Radojičić, Miroslav
AU  - Nesić, Zoran
AU  - Vesić-Vasović, Jasmine
AU  - Spasojević Brkić, Vesna
AU  - Klarin, Milivoj
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1303
AB  - This paper presents an approach to the design of an optimization model for selection of the development strategy in the industry of cutting tools. The paper focuses on analyzing and defining criteria for the formation of multiple-criteria model for ranking of investment proposals. The analysis was performed in specific and unfavorable economic circumstances: a relatively small amount of available capital, dependence on imported materials and technology equipment, unfavorable balance of foreign trade. This paper presents an example of multi criteria ranking of six development programs for specific conditions in the production of cutting tools.
T2  - Technics Technologies Education Management
T1  - One approach to the design of an optimization model for selection of the development strategy
EP  - 110
IS  - 1
SP  - 99
VL  - 6
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1303
ER  - 

@article{
author = "Radojičić, Miroslav and Nesić, Zoran and Vesić-Vasović, Jasmine and Spasojević Brkić, Vesna and Klarin, Milivoj",
year = "2011",
abstract = "This paper presents an approach to the design of an optimization model for selection of the development strategy in the industry of cutting tools. The paper focuses on analyzing and defining criteria for the formation of multiple-criteria model for ranking of investment proposals. The analysis was performed in specific and unfavorable economic circumstances: a relatively small amount of available capital, dependence on imported materials and technology equipment, unfavorable balance of foreign trade. This paper presents an example of multi criteria ranking of six development programs for specific conditions in the production of cutting tools.",
journal = "Technics Technologies Education Management",
title = "One approach to the design of an optimization model for selection of the development strategy",
pages = "110-99",
number = "1",
volume = "6",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1303"
}

Radojičić, M., Nesić, Z., Vesić-Vasović, J., Spasojević Brkić, V.,& Klarin, M.. (2011). One approach to the design of an optimization model for selection of the development strategy. in Technics Technologies Education Management, 6(1), 99-110.
https://hdl.handle.net/21.15107/rcub_machinery_1303

Radojičić M, Nesić Z, Vesić-Vasović J, Spasojević Brkić V, Klarin M. One approach to the design of an optimization model for selection of the development strategy. in Technics Technologies Education Management. 2011;6(1):99-110.
https://hdl.handle.net/21.15107/rcub_machinery_1303 .

Radojičić, Miroslav, Nesić, Zoran, Vesić-Vasović, Jasmine, Spasojević Brkić, Vesna, Klarin, Milivoj, "One approach to the design of an optimization model for selection of the development strategy" in Technics Technologies Education Management, 6, no. 1 (2011):99-110,
https://hdl.handle.net/21.15107/rcub_machinery_1303 .

TY  - JOUR
AU  - Radojičić, Miroslav
AU  - Nesić, Zoran
AU  - Vesić-Vasović, Jasmine
AU  - Klarin, Milivoj
AU  - Spasojević Brkić, Vesna
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1273
AB  - The paper presents an approach to determining the degree of capacity utilization, using a modified method of the present observations. Development of new methodologies for identifying value-time degree of capacity utilization creates the opportunities for adequate selection of technological concepts and provides a rational approach to the choice of exploitation of Machines, especially those which are more expensive and represent a capital-intensive part of the technological equipment in production. In this way, by improving processes and organizational performance, opportunities for lowering costs reduced to the unit product, i.e. for reducing product costs, can be created.
T2  - Technics Technologies Education Management
T1  - One approach to improving production capacities in the function of reducing the cost
EP  - 1326
IS  - 4
SP  - 1320
VL  - 6
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1273
ER  - 

@article{
author = "Radojičić, Miroslav and Nesić, Zoran and Vesić-Vasović, Jasmine and Klarin, Milivoj and Spasojević Brkić, Vesna",
year = "2011",
abstract = "The paper presents an approach to determining the degree of capacity utilization, using a modified method of the present observations. Development of new methodologies for identifying value-time degree of capacity utilization creates the opportunities for adequate selection of technological concepts and provides a rational approach to the choice of exploitation of Machines, especially those which are more expensive and represent a capital-intensive part of the technological equipment in production. In this way, by improving processes and organizational performance, opportunities for lowering costs reduced to the unit product, i.e. for reducing product costs, can be created.",
journal = "Technics Technologies Education Management",
title = "One approach to improving production capacities in the function of reducing the cost",
pages = "1326-1320",
number = "4",
volume = "6",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1273"
}

Radojičić, M., Nesić, Z., Vesić-Vasović, J., Klarin, M.,& Spasojević Brkić, V.. (2011). One approach to improving production capacities in the function of reducing the cost. in Technics Technologies Education Management, 6(4), 1320-1326.
https://hdl.handle.net/21.15107/rcub_machinery_1273

Radojičić M, Nesić Z, Vesić-Vasović J, Klarin M, Spasojević Brkić V. One approach to improving production capacities in the function of reducing the cost. in Technics Technologies Education Management. 2011;6(4):1320-1326.
https://hdl.handle.net/21.15107/rcub_machinery_1273 .

Radojičić, Miroslav, Nesić, Zoran, Vesić-Vasović, Jasmine, Klarin, Milivoj, Spasojević Brkić, Vesna, "One approach to improving production capacities in the function of reducing the cost" in Technics Technologies Education Management, 6, no. 4 (2011):1320-1326,
https://hdl.handle.net/21.15107/rcub_machinery_1273 .