TY  - CONF
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav
AU  - Stanković, Vladislav
AU  - Gajić, Branislav
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6489
AB  - Претходна 2021. и први месеци 2022. године су обележени „драстичним“ повећањем трошкова у процесним индустријама, термотехници и енергетици. У чланку је анализирана промена индекса цена CEPCI у наведеном периоду.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)
C3  - Zbornik radova 35. Međunarodnog kongresa o procesnoj industriji, Procesing 2022
T1  - Значајно повећање индекса трошкова процесних постројења и опреме током 2021.
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6489
ER  - 

@conference{
author = "Genić, Srbislav and Jaćimović, Branislav and Stanković, Vladislav and Gajić, Branislav",
year = "2022",
abstract = "Претходна 2021. и први месеци 2022. године су обележени „драстичним“ повећањем трошкова у процесним индустријама, термотехници и енергетици. У чланку је анализирана промена индекса цена CEPCI у наведеном периоду.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)",
journal = "Zbornik radova 35. Međunarodnog kongresa o procesnoj industriji, Procesing 2022",
title = "Значајно повећање индекса трошкова процесних постројења и опреме током 2021.",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6489"
}

Genić, S., Jaćimović, B., Stanković, V.,& Gajić, B.. (2022). Значајно повећање индекса трошкова процесних постројења и опреме током 2021.. in Zbornik radova 35. Međunarodnog kongresa o procesnoj industriji, Procesing 2022
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)..
https://hdl.handle.net/21.15107/rcub_machinery_6489

Genić S, Jaćimović B, Stanković V, Gajić B. Значајно повећање индекса трошкова процесних постројења и опреме током 2021.. in Zbornik radova 35. Međunarodnog kongresa o procesnoj industriji, Procesing 2022. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_6489 .

Genić, Srbislav, Jaćimović, Branislav, Stanković, Vladislav, Gajić, Branislav, "Значајно повећање индекса трошкова процесних постројења и опреме током 2021." in Zbornik radova 35. Međunarodnog kongresa o procesnoj industriji, Procesing 2022 (2022),
https://hdl.handle.net/21.15107/rcub_machinery_6489 .

TY  - CONF
AU  - Gajić, Branislav
AU  - Marković, Saša
AU  - Genić, Srbislav
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6460
AB  - In the paper, we analyze the operation of a plant producing refined alcohol with a capacity of 25,000 kg/day, which uses corn as the primary raw material. On the site location, there are a cow farm, a plant for the combined production of heat and electricity using biogas, and a distillery production plant. The raw material for biogas is manure from a cow farm. The energy required for the production process and the operation of the supporting systems (space heating, own consumption of the CHP plant, etc.) is obtained by burning biogas and ethanol so that fossil fuels are used only in cases of plant start-up or incident situations of production process failure.
The analysis presented in this paper aims to set up a carbon dioxide balance for a production plant with accompanying systems and its comparison to the carbon dioxide consumption necessary for corn's growth.
C3  - Programme & Book of Abstracts of IEEP 2022
T1  - CO2 EMISSION REDUCTION BY USING CORN AS A RAW MATERIAL IN REFINED ALCOHOL PRODUCTION
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6460
ER  - 

@conference{
author = "Gajić, Branislav and Marković, Saša and Genić, Srbislav",
year = "2022",
abstract = "In the paper, we analyze the operation of a plant producing refined alcohol with a capacity of 25,000 kg/day, which uses corn as the primary raw material. On the site location, there are a cow farm, a plant for the combined production of heat and electricity using biogas, and a distillery production plant. The raw material for biogas is manure from a cow farm. The energy required for the production process and the operation of the supporting systems (space heating, own consumption of the CHP plant, etc.) is obtained by burning biogas and ethanol so that fossil fuels are used only in cases of plant start-up or incident situations of production process failure.
The analysis presented in this paper aims to set up a carbon dioxide balance for a production plant with accompanying systems and its comparison to the carbon dioxide consumption necessary for corn's growth.",
journal = "Programme & Book of Abstracts of IEEP 2022",
title = "CO2 EMISSION REDUCTION BY USING CORN AS A RAW MATERIAL IN REFINED ALCOHOL PRODUCTION",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6460"
}

Gajić, B., Marković, S.,& Genić, S.. (2022). CO2 EMISSION REDUCTION BY USING CORN AS A RAW MATERIAL IN REFINED ALCOHOL PRODUCTION. in Programme & Book of Abstracts of IEEP 2022.
https://hdl.handle.net/21.15107/rcub_machinery_6460

Gajić B, Marković S, Genić S. CO2 EMISSION REDUCTION BY USING CORN AS A RAW MATERIAL IN REFINED ALCOHOL PRODUCTION. in Programme & Book of Abstracts of IEEP 2022. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_6460 .

Gajić, Branislav, Marković, Saša, Genić, Srbislav, "CO2 EMISSION REDUCTION BY USING CORN AS A RAW MATERIAL IN REFINED ALCOHOL PRODUCTION" in Programme & Book of Abstracts of IEEP 2022 (2022),
https://hdl.handle.net/21.15107/rcub_machinery_6460 .

TY  - GEN
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Stamenić, Mirjana
AU  - Aranđelović, Ivan
AU  - Petrović, Aleksandar
AU  - Mitrović, Nenad
AU  - Milovančević, Uroš
AU  - Ivošević, Miloš
AU  - Otović, Milena
AU  - Petrović, Andrija
AU  - Rajić, Radenko S.
AU  - Tanasić, Nikola
AU  - Mihailović, Miloš
AU  - Marković, Saša
AU  - Bogdanović, Predrag
AU  - Simonović, Tomislav
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6065
PB  - Univerzitet u Beogradu, Mašinski fakultet
T1  - Metodi i primeri eksperimentalnog rada u procesnom inženjerstvu i termotehnici
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6065
ER  - 

@misc{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Stamenić, Mirjana and Aranđelović, Ivan and Petrović, Aleksandar and Mitrović, Nenad and Milovančević, Uroš and Ivošević, Miloš and Otović, Milena and Petrović, Andrija and Rajić, Radenko S. and Tanasić, Nikola and Mihailović, Miloš and Marković, Saša and Bogdanović, Predrag and Simonović, Tomislav",
year = "2022",
publisher = "Univerzitet u Beogradu, Mašinski fakultet",
title = "Metodi i primeri eksperimentalnog rada u procesnom inženjerstvu i termotehnici",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6065"
}

Jaćimović, B. M., Genić, S., Stamenić, M., Aranđelović, I., Petrović, A., Mitrović, N., Milovančević, U., Ivošević, M., Otović, M., Petrović, A., Rajić, R. S., Tanasić, N., Mihailović, M., Marković, S., Bogdanović, P.,& Simonović, T.. (2022). Metodi i primeri eksperimentalnog rada u procesnom inženjerstvu i termotehnici. 
Univerzitet u Beogradu, Mašinski fakultet..
https://hdl.handle.net/21.15107/rcub_machinery_6065

Jaćimović BM, Genić S, Stamenić M, Aranđelović I, Petrović A, Mitrović N, Milovančević U, Ivošević M, Otović M, Petrović A, Rajić RS, Tanasić N, Mihailović M, Marković S, Bogdanović P, Simonović T. Metodi i primeri eksperimentalnog rada u procesnom inženjerstvu i termotehnici. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_6065 .

Jaćimović, Branislav M., Genić, Srbislav, Stamenić, Mirjana, Aranđelović, Ivan, Petrović, Aleksandar, Mitrović, Nenad, Milovančević, Uroš, Ivošević, Miloš, Otović, Milena, Petrović, Andrija, Rajić, Radenko S., Tanasić, Nikola, Mihailović, Miloš, Marković, Saša, Bogdanović, Predrag, Simonović, Tomislav, "Metodi i primeri eksperimentalnog rada u procesnom inženjerstvu i termotehnici" (2022),
https://hdl.handle.net/21.15107/rcub_machinery_6065 .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Jacimović, Nikola
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3765
AB  - During the sizing of the radiant zone in boilers and furnaces, the most often used method is the Lobo-Evans model. This method is based on the perfect mixing model for flue gas flow inside the fire box, which represents a conservative or pessimistic flow pattern. This paper presents a different, optimistic model which is based on the plug flow for flue gas flow which results in the largest possible heat duty. The proposed model is given in two distinct forms-integral and numerical. As shown in the paper, the integral model results in small deviations with respect to the numerical model and, as such, is well suited for the engineering practice. Paper also presents an engineering approach to the calculation of the conductive heat transfer through the membrane wall, which is shown to be sufficiently accurate and simple for engineering calculations.
PB  - ASME, New York
T2  - Journal of Thermal Science and Engineering Applications
T1  - Influence of Flue Gas Pattern Flow in Boiler Radiant Section on Heat Transfer
IS  - 2
VL  - 14
DO  - 10.1115/1.4051369
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Jacimović, Nikola",
year = "2022",
abstract = "During the sizing of the radiant zone in boilers and furnaces, the most often used method is the Lobo-Evans model. This method is based on the perfect mixing model for flue gas flow inside the fire box, which represents a conservative or pessimistic flow pattern. This paper presents a different, optimistic model which is based on the plug flow for flue gas flow which results in the largest possible heat duty. The proposed model is given in two distinct forms-integral and numerical. As shown in the paper, the integral model results in small deviations with respect to the numerical model and, as such, is well suited for the engineering practice. Paper also presents an engineering approach to the calculation of the conductive heat transfer through the membrane wall, which is shown to be sufficiently accurate and simple for engineering calculations.",
publisher = "ASME, New York",
journal = "Journal of Thermal Science and Engineering Applications",
title = "Influence of Flue Gas Pattern Flow in Boiler Radiant Section on Heat Transfer",
number = "2",
volume = "14",
doi = "10.1115/1.4051369"
}

Jaćimović, B. M., Genić, S.,& Jacimović, N.. (2022). Influence of Flue Gas Pattern Flow in Boiler Radiant Section on Heat Transfer. in Journal of Thermal Science and Engineering Applications
ASME, New York., 14(2).
https://doi.org/10.1115/1.4051369

Jaćimović BM, Genić S, Jacimović N. Influence of Flue Gas Pattern Flow in Boiler Radiant Section on Heat Transfer. in Journal of Thermal Science and Engineering Applications. 2022;14(2).
doi:10.1115/1.4051369 .

Jaćimović, Branislav M., Genić, Srbislav, Jacimović, Nikola, "Influence of Flue Gas Pattern Flow in Boiler Radiant Section on Heat Transfer" in Journal of Thermal Science and Engineering Applications, 14, no. 2 (2022),
https://doi.org/10.1115/1.4051369 . .

TY  - JOUR
AU  - Mihailović, Miloš
AU  - Milovančević, Uroš
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav M.
AU  - Otović, Milena
AU  - Kolendić, Petar
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3274
AB  - In order to establish a reliable procedure for estimation of heat transfer coefficient, experiments on plate finned tube heat exchangers have been conducted on five exchangers. Using own and previously published experimental data databank of 969 working regimes, a new correlation was formed. Correlation is based on hydraulic diameter and porous velocity and on the ratio of characteristic surfaces of the finned tube bundle. Statistical parameters of a new correlation for estimation of heat transfer coefficient are very good, and correlation covers a wide range of geometrical and other parameters of heat exchangers that are industrially important.
PB  - Taylor & Francis Inc, Philadelphia
T2  - Experimental Heat Transfer
T1  - Air side heat transfer coefficient in plate finned tube heat exchangers
EP  - 399
IS  - 4
SP  - 388
VL  - 33
DO  - 10.1080/08916152.2019.1656298
ER  - 

@article{
author = "Mihailović, Miloš and Milovančević, Uroš and Genić, Srbislav and Jaćimović, Branislav M. and Otović, Milena and Kolendić, Petar",
year = "2020",
abstract = "In order to establish a reliable procedure for estimation of heat transfer coefficient, experiments on plate finned tube heat exchangers have been conducted on five exchangers. Using own and previously published experimental data databank of 969 working regimes, a new correlation was formed. Correlation is based on hydraulic diameter and porous velocity and on the ratio of characteristic surfaces of the finned tube bundle. Statistical parameters of a new correlation for estimation of heat transfer coefficient are very good, and correlation covers a wide range of geometrical and other parameters of heat exchangers that are industrially important.",
publisher = "Taylor & Francis Inc, Philadelphia",
journal = "Experimental Heat Transfer",
title = "Air side heat transfer coefficient in plate finned tube heat exchangers",
pages = "399-388",
number = "4",
volume = "33",
doi = "10.1080/08916152.2019.1656298"
}

Mihailović, M., Milovančević, U., Genić, S., Jaćimović, B. M., Otović, M.,& Kolendić, P.. (2020). Air side heat transfer coefficient in plate finned tube heat exchangers. in Experimental Heat Transfer
Taylor & Francis Inc, Philadelphia., 33(4), 388-399.
https://doi.org/10.1080/08916152.2019.1656298

Mihailović M, Milovančević U, Genić S, Jaćimović BM, Otović M, Kolendić P. Air side heat transfer coefficient in plate finned tube heat exchangers. in Experimental Heat Transfer. 2020;33(4):388-399.
doi:10.1080/08916152.2019.1656298 .

Mihailović, Miloš, Milovančević, Uroš, Genić, Srbislav, Jaćimović, Branislav M., Otović, Milena, Kolendić, Petar, "Air side heat transfer coefficient in plate finned tube heat exchangers" in Experimental Heat Transfer, 33, no. 4 (2020):388-399,
https://doi.org/10.1080/08916152.2019.1656298 . .

TY  - CONF
AU  - Otović, Milena
AU  - Milovančević, Uroš
AU  - Genić, Srbislav
AU  - Mitrović, Nenad
AU  - Černicin, Vladimir
AU  - Otović, Srđan
AU  - Antić, Milan I.
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5535
AB  - On the hitherto installed chillers/rooftop units/dry coolers and air coolers, a significant improvement in cooling was noticed in the summer mode when the pipe bundle is sprayed with water. Tests have been performed on systems that produce water mist (micron-sized water droplets), which are formed by spraying water under high pressure through the nozzles/nozzle openings. When a drop of micron-sized water comes in contact with warm air, it evaporates very quickly, absorbing a certain amount of heat, which results in cooling the air. This improves the operation of the cooler in critical periods when the ambient air temperature is very high. The aim of the test is to determine the improvement of the cooler operation under operating conditions with the application of the described system in relation to the operating mode without water spraying (dry operating mode).
PB  - Beograd: SMEITS
C3  - Zbornik 51. Međunarodnog kongresa o KGH
T1  - TESTING OF THE INFLUENCE OF THE SPRAY COOLING SYSTEM ON THE AIR COOLER EFFICIENCY
DO  - 10.24094/kghk.020.51.1.11
ER  - 

@conference{
author = "Otović, Milena and Milovančević, Uroš and Genić, Srbislav and Mitrović, Nenad and Černicin, Vladimir and Otović, Srđan and Antić, Milan I.",
year = "2020",
abstract = "On the hitherto installed chillers/rooftop units/dry coolers and air coolers, a significant improvement in cooling was noticed in the summer mode when the pipe bundle is sprayed with water. Tests have been performed on systems that produce water mist (micron-sized water droplets), which are formed by spraying water under high pressure through the nozzles/nozzle openings. When a drop of micron-sized water comes in contact with warm air, it evaporates very quickly, absorbing a certain amount of heat, which results in cooling the air. This improves the operation of the cooler in critical periods when the ambient air temperature is very high. The aim of the test is to determine the improvement of the cooler operation under operating conditions with the application of the described system in relation to the operating mode without water spraying (dry operating mode).",
publisher = "Beograd: SMEITS",
journal = "Zbornik 51. Međunarodnog kongresa o KGH",
title = "TESTING OF THE INFLUENCE OF THE SPRAY COOLING SYSTEM ON THE AIR COOLER EFFICIENCY",
doi = "10.24094/kghk.020.51.1.11"
}

Otović, M., Milovančević, U., Genić, S., Mitrović, N., Černicin, V., Otović, S.,& Antić, M. I.. (2020). TESTING OF THE INFLUENCE OF THE SPRAY COOLING SYSTEM ON THE AIR COOLER EFFICIENCY. in Zbornik 51. Međunarodnog kongresa o KGH
Beograd: SMEITS..
https://doi.org/10.24094/kghk.020.51.1.11

Otović M, Milovančević U, Genić S, Mitrović N, Černicin V, Otović S, Antić MI. TESTING OF THE INFLUENCE OF THE SPRAY COOLING SYSTEM ON THE AIR COOLER EFFICIENCY. in Zbornik 51. Međunarodnog kongresa o KGH. 2020;.
doi:10.24094/kghk.020.51.1.11 .

Otović, Milena, Milovančević, Uroš, Genić, Srbislav, Mitrović, Nenad, Černicin, Vladimir, Otović, Srđan, Antić, Milan I., "TESTING OF THE INFLUENCE OF THE SPRAY COOLING SYSTEM ON THE AIR COOLER EFFICIENCY" in Zbornik 51. Međunarodnog kongresa o KGH (2020),
https://doi.org/10.24094/kghk.020.51.1.11 . .

TY  - CONF
AU  - Otović, Milena
AU  - Genić, Srbislav
AU  - Milovančević, Uroš
AU  - Černicin, Vladimir
AU  - Otović, Srđan
AU  - Stevanović, Snežana M.
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5517
AB  - This paper deals with the procedure for measuring the relevant parameters of plate-finned tube heat exchangers operating as an air heaters. Besides the description of the experimental installation, the most important geometric characteristics of these appliances are given. In order to determine the relevant parameters for dry and wet regimes (for cases with and without spray cooling), experimental measurements of the heat and hydraulic performance of the heat exchangers were made. Water flowed through the pipes as a warmer fluid. During the experiments, the flow rates and temperatures of the working fluids were varied within the limits defined by the operating parameters of the installation itself, sufficient to allow the obtained results to be generalized. The experimental data were processed by appropriate statistical methods; the aim was to determine equations suitable for engineering practice. The coefficients of the air-side heat and mass transfer and friction factor are defined on the complex geometry of this type of heat exchangers under realistic operating conditions, as a function of the relevant similarity criteria.
PB  - Beograd: SMEITS
C3  - Zbornik 50. Međunarodnog kongresa o KGH
T1  - TESTING OF AIR HEATERS WITH PLATE FINNED TUBES WITH SPRAY COOLING
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5517
ER  - 

@conference{
author = "Otović, Milena and Genić, Srbislav and Milovančević, Uroš and Černicin, Vladimir and Otović, Srđan and Stevanović, Snežana M.",
year = "2020",
abstract = "This paper deals with the procedure for measuring the relevant parameters of plate-finned tube heat exchangers operating as an air heaters. Besides the description of the experimental installation, the most important geometric characteristics of these appliances are given. In order to determine the relevant parameters for dry and wet regimes (for cases with and without spray cooling), experimental measurements of the heat and hydraulic performance of the heat exchangers were made. Water flowed through the pipes as a warmer fluid. During the experiments, the flow rates and temperatures of the working fluids were varied within the limits defined by the operating parameters of the installation itself, sufficient to allow the obtained results to be generalized. The experimental data were processed by appropriate statistical methods; the aim was to determine equations suitable for engineering practice. The coefficients of the air-side heat and mass transfer and friction factor are defined on the complex geometry of this type of heat exchangers under realistic operating conditions, as a function of the relevant similarity criteria.",
publisher = "Beograd: SMEITS",
journal = "Zbornik 50. Međunarodnog kongresa o KGH",
title = "TESTING OF AIR HEATERS WITH PLATE FINNED TUBES WITH SPRAY COOLING",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5517"
}

Otović, M., Genić, S., Milovančević, U., Černicin, V., Otović, S.,& Stevanović, S. M.. (2020). TESTING OF AIR HEATERS WITH PLATE FINNED TUBES WITH SPRAY COOLING. in Zbornik 50. Međunarodnog kongresa o KGH
Beograd: SMEITS..
https://hdl.handle.net/21.15107/rcub_machinery_5517

Otović M, Genić S, Milovančević U, Černicin V, Otović S, Stevanović SM. TESTING OF AIR HEATERS WITH PLATE FINNED TUBES WITH SPRAY COOLING. in Zbornik 50. Međunarodnog kongresa o KGH. 2020;.
https://hdl.handle.net/21.15107/rcub_machinery_5517 .

Otović, Milena, Genić, Srbislav, Milovančević, Uroš, Černicin, Vladimir, Otović, Srđan, Stevanović, Snežana M., "TESTING OF AIR HEATERS WITH PLATE FINNED TUBES WITH SPRAY COOLING" in Zbornik 50. Međunarodnog kongresa o KGH (2020),
https://hdl.handle.net/21.15107/rcub_machinery_5517 .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Jacimović, Nikola
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3389
AB  - This paper presents alternatives to Kalina cycles typically used in place of the organic Rankine cycle in biomass power plants. Overviews of both Rankine and Kalina cycles are given alongside the possibilities of using biomass as a viable energy source and recommended guidelines from the engineering practice for selection and management of these cycles. Benefits of Kalina novel bottoming cycle (and the alternative cycles presented herewith) over the Rankine cycle are the higher thermodynamic cycle efficiency and lower capital expenditures combined with the possibility of using low-grade heat sources, such as biomass or waste heat from exhaust gases. Analysis of ammonia-water binary system under various operating conditions has been performed for all the proposed cycles based on the published references and it has been shown that the proposed alternative models prove to be simpler and to have similar or even greater thermodynamic efficiency compared with the Kalina novel bottoming cycle.
PB  - Wiley, Hoboken
T2  - International Journal of Energy Research
T1  - Application of modified Kalina cycle in biomass chp plants
EP  - 8768
IS  - 11
SP  - 8754
VL  - 44
DO  - 10.1002/er.5570
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Jacimović, Nikola",
year = "2020",
abstract = "This paper presents alternatives to Kalina cycles typically used in place of the organic Rankine cycle in biomass power plants. Overviews of both Rankine and Kalina cycles are given alongside the possibilities of using biomass as a viable energy source and recommended guidelines from the engineering practice for selection and management of these cycles. Benefits of Kalina novel bottoming cycle (and the alternative cycles presented herewith) over the Rankine cycle are the higher thermodynamic cycle efficiency and lower capital expenditures combined with the possibility of using low-grade heat sources, such as biomass or waste heat from exhaust gases. Analysis of ammonia-water binary system under various operating conditions has been performed for all the proposed cycles based on the published references and it has been shown that the proposed alternative models prove to be simpler and to have similar or even greater thermodynamic efficiency compared with the Kalina novel bottoming cycle.",
publisher = "Wiley, Hoboken",
journal = "International Journal of Energy Research",
title = "Application of modified Kalina cycle in biomass chp plants",
pages = "8768-8754",
number = "11",
volume = "44",
doi = "10.1002/er.5570"
}

Jaćimović, B. M., Genić, S.,& Jacimović, N.. (2020). Application of modified Kalina cycle in biomass chp plants. in International Journal of Energy Research
Wiley, Hoboken., 44(11), 8754-8768.
https://doi.org/10.1002/er.5570

Jaćimović BM, Genić S, Jacimović N. Application of modified Kalina cycle in biomass chp plants. in International Journal of Energy Research. 2020;44(11):8754-8768.
doi:10.1002/er.5570 .

Jaćimović, Branislav M., Genić, Srbislav, Jacimović, Nikola, "Application of modified Kalina cycle in biomass chp plants" in International Journal of Energy Research, 44, no. 11 (2020):8754-8768,
https://doi.org/10.1002/er.5570 . .

TY  - JOUR
AU  - Milovančević, Uroš
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - El-Sagier, Faraj
AU  - Otović, Milena
AU  - Stevanović, Snežana M.
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3233
AB  - Thermoeconomic analysis of spiral heat exchanger is conducted. Different geometrical parameters, such as outer diameter, plate height, passage gap, etc. are used and varied in a wide range. Detailed thermal and total costs analyses were performed for two spiral heat exchanger with different process fluids (water and thermal oil) with temperature changes, while the wall temperature was kept constant (condensation). The results were shown graphically. It is determined that optimum values of number of entropy generation units correspond to minimum total annual cost. The optimal solution could be found in the recommended range of geometric sizes for defined inlet and outlet temperatures and process fluid-flow rate.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Thermoeconomic analysis of spiral heat exchanger with constant wall temperature
EP  - 410
IS  - 1
SP  - 401
VL  - 23
DO  - 10.2298/TSCI170605150M
ER  - 

@article{
author = "Milovančević, Uroš and Jaćimović, Branislav M. and Genić, Srbislav and El-Sagier, Faraj and Otović, Milena and Stevanović, Snežana M.",
year = "2019",
abstract = "Thermoeconomic analysis of spiral heat exchanger is conducted. Different geometrical parameters, such as outer diameter, plate height, passage gap, etc. are used and varied in a wide range. Detailed thermal and total costs analyses were performed for two spiral heat exchanger with different process fluids (water and thermal oil) with temperature changes, while the wall temperature was kept constant (condensation). The results were shown graphically. It is determined that optimum values of number of entropy generation units correspond to minimum total annual cost. The optimal solution could be found in the recommended range of geometric sizes for defined inlet and outlet temperatures and process fluid-flow rate.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Thermoeconomic analysis of spiral heat exchanger with constant wall temperature",
pages = "410-401",
number = "1",
volume = "23",
doi = "10.2298/TSCI170605150M"
}

Milovančević, U., Jaćimović, B. M., Genić, S., El-Sagier, F., Otović, M.,& Stevanović, S. M.. (2019). Thermoeconomic analysis of spiral heat exchanger with constant wall temperature. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 23(1), 401-410.
https://doi.org/10.2298/TSCI170605150M

Milovančević U, Jaćimović BM, Genić S, El-Sagier F, Otović M, Stevanović SM. Thermoeconomic analysis of spiral heat exchanger with constant wall temperature. in Thermal Science. 2019;23(1):401-410.
doi:10.2298/TSCI170605150M .

Milovančević, Uroš, Jaćimović, Branislav M., Genić, Srbislav, El-Sagier, Faraj, Otović, Milena, Stevanović, Snežana M., "Thermoeconomic analysis of spiral heat exchanger with constant wall temperature" in Thermal Science, 23, no. 1 (2019):401-410,
https://doi.org/10.2298/TSCI170605150M . .

TY  - JOUR
AU  - Marković, Sasa
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Mihailović, Miloš
AU  - Milovančević, Uroš
AU  - Otović, Milena
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3095
AB  - Previous researches have proved that newly introduced parameters such as void velocity and others can be successfully used for correlating the heat transfer and pressure drop parameters. In order to establish a reliable procedure for estimation of air pressure drop, experiments on plate finned tube heat exchangers have been conducted, as well as the extensive investigation of the open literature. Using own and previously published experimental data, new correlation for estimation of air pressure drop have been established, covering a wide range of parameters of industrial importance. New correlation is comprehensive and statistically superior to any other pressure drop correlation.
PB  - Elsevier Sci Ltd, Oxford
T2  - International Journal of Refrigeration-Revue Internationale Du Froid
T1  - Air side pressure drop in plate finned tube heat exchangers
EP  - 36
SP  - 24
VL  - 99
DO  - 10.1016/j.ijrefrig.2018.11.038
ER  - 

@article{
author = "Marković, Sasa and Jaćimović, Branislav M. and Genić, Srbislav and Mihailović, Miloš and Milovančević, Uroš and Otović, Milena",
year = "2019",
abstract = "Previous researches have proved that newly introduced parameters such as void velocity and others can be successfully used for correlating the heat transfer and pressure drop parameters. In order to establish a reliable procedure for estimation of air pressure drop, experiments on plate finned tube heat exchangers have been conducted, as well as the extensive investigation of the open literature. Using own and previously published experimental data, new correlation for estimation of air pressure drop have been established, covering a wide range of parameters of industrial importance. New correlation is comprehensive and statistically superior to any other pressure drop correlation.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "International Journal of Refrigeration-Revue Internationale Du Froid",
title = "Air side pressure drop in plate finned tube heat exchangers",
pages = "36-24",
volume = "99",
doi = "10.1016/j.ijrefrig.2018.11.038"
}

Marković, S., Jaćimović, B. M., Genić, S., Mihailović, M., Milovančević, U.,& Otović, M.. (2019). Air side pressure drop in plate finned tube heat exchangers. in International Journal of Refrigeration-Revue Internationale Du Froid
Elsevier Sci Ltd, Oxford., 99, 24-36.
https://doi.org/10.1016/j.ijrefrig.2018.11.038

Marković S, Jaćimović BM, Genić S, Mihailović M, Milovančević U, Otović M. Air side pressure drop in plate finned tube heat exchangers. in International Journal of Refrigeration-Revue Internationale Du Froid. 2019;99:24-36.
doi:10.1016/j.ijrefrig.2018.11.038 .

Marković, Sasa, Jaćimović, Branislav M., Genić, Srbislav, Mihailović, Miloš, Milovančević, Uroš, Otović, Milena, "Air side pressure drop in plate finned tube heat exchangers" in International Journal of Refrigeration-Revue Internationale Du Froid, 99 (2019):24-36,
https://doi.org/10.1016/j.ijrefrig.2018.11.038 . .

TY  - JOUR
AU  - Ivošević, Miloš
AU  - Petrović, Andrija
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3025
AB  - In this paper functional relationships between bayonet-tube heat exchanger effectiveness (P), heat capacity ratio (R) and number of transfer units (NTU) for all possible flow arrangements are derived. Temperature profiles of hot and cold fluid are also given. Analysis showed that regarding heat exchanger surface eight possible flow arrangements can be reduced to four. Furthermore it has been shown which flow arrangements have superior thermal performances. Developed methodology was illustrated through the numerical example.
PB  - Springer, New York
T2  - Heat and Mass Transfer
T1  - Thermal performances and their impact on design of bayonet-tube heat exchangers - single phase plug flow
EP  - 2407
IS  - 9
SP  - 2391
VL  - 55
DO  - 10.1007/s00231-019-02568-3
ER  - 

@article{
author = "Ivošević, Miloš and Petrović, Andrija and Jaćimović, Branislav M. and Genić, Srbislav",
year = "2019",
abstract = "In this paper functional relationships between bayonet-tube heat exchanger effectiveness (P), heat capacity ratio (R) and number of transfer units (NTU) for all possible flow arrangements are derived. Temperature profiles of hot and cold fluid are also given. Analysis showed that regarding heat exchanger surface eight possible flow arrangements can be reduced to four. Furthermore it has been shown which flow arrangements have superior thermal performances. Developed methodology was illustrated through the numerical example.",
publisher = "Springer, New York",
journal = "Heat and Mass Transfer",
title = "Thermal performances and their impact on design of bayonet-tube heat exchangers - single phase plug flow",
pages = "2407-2391",
number = "9",
volume = "55",
doi = "10.1007/s00231-019-02568-3"
}

Ivošević, M., Petrović, A., Jaćimović, B. M.,& Genić, S.. (2019). Thermal performances and their impact on design of bayonet-tube heat exchangers - single phase plug flow. in Heat and Mass Transfer
Springer, New York., 55(9), 2391-2407.
https://doi.org/10.1007/s00231-019-02568-3

Ivošević M, Petrović A, Jaćimović BM, Genić S. Thermal performances and their impact on design of bayonet-tube heat exchangers - single phase plug flow. in Heat and Mass Transfer. 2019;55(9):2391-2407.
doi:10.1007/s00231-019-02568-3 .

Ivošević, Miloš, Petrović, Andrija, Jaćimović, Branislav M., Genić, Srbislav, "Thermal performances and their impact on design of bayonet-tube heat exchangers - single phase plug flow" in Heat and Mass Transfer, 55, no. 9 (2019):2391-2407,
https://doi.org/10.1007/s00231-019-02568-3 . .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Stamenić, Mirjana
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3082
AB  - In this paper we have reexamined the published correlations for liquid and vapor enthalpy and entropy data in order to obtain statistical proof that the correlations are in accordance with the databanks found in the open literature. In this process few new correlations were found to be with better accordance with data banks. After reconsiderations we have concluded that new correlations proposed hereby have to be given the preference rather than the previously published correlations.
PB  - Elsevier Sci Ltd, Oxford
T2  - International Journal of Refrigeration-Revue Internationale Du Froid
T1  - Reconsideration of enthalpy and entropy data and correlations for ammonia-water mixture up to 100 bar AND 535 degrees C
EP  - 92
SP  - 83
VL  - 100
DO  - 10.1016/j.ijrefrig.2019.01.004
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Stamenić, Mirjana",
year = "2019",
abstract = "In this paper we have reexamined the published correlations for liquid and vapor enthalpy and entropy data in order to obtain statistical proof that the correlations are in accordance with the databanks found in the open literature. In this process few new correlations were found to be with better accordance with data banks. After reconsiderations we have concluded that new correlations proposed hereby have to be given the preference rather than the previously published correlations.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "International Journal of Refrigeration-Revue Internationale Du Froid",
title = "Reconsideration of enthalpy and entropy data and correlations for ammonia-water mixture up to 100 bar AND 535 degrees C",
pages = "92-83",
volume = "100",
doi = "10.1016/j.ijrefrig.2019.01.004"
}

Jaćimović, B. M., Genić, S.,& Stamenić, M.. (2019). Reconsideration of enthalpy and entropy data and correlations for ammonia-water mixture up to 100 bar AND 535 degrees C. in International Journal of Refrigeration-Revue Internationale Du Froid
Elsevier Sci Ltd, Oxford., 100, 83-92.
https://doi.org/10.1016/j.ijrefrig.2019.01.004

Jaćimović BM, Genić S, Stamenić M. Reconsideration of enthalpy and entropy data and correlations for ammonia-water mixture up to 100 bar AND 535 degrees C. in International Journal of Refrigeration-Revue Internationale Du Froid. 2019;100:83-92.
doi:10.1016/j.ijrefrig.2019.01.004 .

Jaćimović, Branislav M., Genić, Srbislav, Stamenić, Mirjana, "Reconsideration of enthalpy and entropy data and correlations for ammonia-water mixture up to 100 bar AND 535 degrees C" in International Journal of Refrigeration-Revue Internationale Du Froid, 100 (2019):83-92,
https://doi.org/10.1016/j.ijrefrig.2019.01.004 . .

TY  - JOUR
AU  - Jacimović, Nikola
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav M.
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3067
AB  - Removal of oxygen from feedwater is of paramount importance for safe boiler operation. Insufficient extraction of oxygen in deaeration vessels will lead to limited efficiency of oxygen scavengers and unsafe plant operation. The presented sizing procedure for packed deaeration columns is based on the similarity theory between heat and mass transfer and existing procedures. The goal of the proposed technique is not to achieve optimization of column dimensions, but to ensure that there is no undersizing of the packing height. This approach is justified considering the relatively low capital costs of deaeration columns in boiler plants. The proposed equations are based on an experimental setup involving several hundred operating regimes which have been verified and confirmed to have a high degree of accuracy.
PB  - Wiley-V C H Verlag Gmbh, Weinheim
T2  - Chemical Engineering & Technology
T1  - Sizing of Packed Deaeration Columns
EP  - 2716
IS  - 12
SP  - 2709
VL  - 42
DO  - 10.1002/ceat.201800642
ER  - 

@article{
author = "Jacimović, Nikola and Genić, Srbislav and Jaćimović, Branislav M.",
year = "2019",
abstract = "Removal of oxygen from feedwater is of paramount importance for safe boiler operation. Insufficient extraction of oxygen in deaeration vessels will lead to limited efficiency of oxygen scavengers and unsafe plant operation. The presented sizing procedure for packed deaeration columns is based on the similarity theory between heat and mass transfer and existing procedures. The goal of the proposed technique is not to achieve optimization of column dimensions, but to ensure that there is no undersizing of the packing height. This approach is justified considering the relatively low capital costs of deaeration columns in boiler plants. The proposed equations are based on an experimental setup involving several hundred operating regimes which have been verified and confirmed to have a high degree of accuracy.",
publisher = "Wiley-V C H Verlag Gmbh, Weinheim",
journal = "Chemical Engineering & Technology",
title = "Sizing of Packed Deaeration Columns",
pages = "2716-2709",
number = "12",
volume = "42",
doi = "10.1002/ceat.201800642"
}

Jacimović, N., Genić, S.,& Jaćimović, B. M.. (2019). Sizing of Packed Deaeration Columns. in Chemical Engineering & Technology
Wiley-V C H Verlag Gmbh, Weinheim., 42(12), 2709-2716.
https://doi.org/10.1002/ceat.201800642

Jacimović N, Genić S, Jaćimović BM. Sizing of Packed Deaeration Columns. in Chemical Engineering & Technology. 2019;42(12):2709-2716.
doi:10.1002/ceat.201800642 .

Jacimović, Nikola, Genić, Srbislav, Jaćimović, Branislav M., "Sizing of Packed Deaeration Columns" in Chemical Engineering & Technology, 42, no. 12 (2019):2709-2716,
https://doi.org/10.1002/ceat.201800642 . .

TY  - JOUR
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav M.
AU  - Milovančević, Uroš
AU  - Ivošević, Miloš
AU  - Otović, Milena
AU  - Antić, Milan I.
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2941
AB  - The procedure for field testing of plate heat exchanger, considered as a black box, is presented in the paper. After the field measurements have been conducted, simple but unambiguous procedure has been used to establish heat performance parameters including the heat duty and fouling factor. Advantage of hereby presented method is that it can be used for analysis of any other similar heat transfer equipment.
PB  - Springer, New York
T2  - Heat and Mass Transfer
T1  - Thermal performances of a "black box" heat exchanger in district heating system
EP  - 873
IS  - 3
SP  - 867
VL  - 54
DO  - 10.1007/s00231-017-2182-5
ER  - 

@article{
author = "Genić, Srbislav and Jaćimović, Branislav M. and Milovančević, Uroš and Ivošević, Miloš and Otović, Milena and Antić, Milan I.",
year = "2018",
abstract = "The procedure for field testing of plate heat exchanger, considered as a black box, is presented in the paper. After the field measurements have been conducted, simple but unambiguous procedure has been used to establish heat performance parameters including the heat duty and fouling factor. Advantage of hereby presented method is that it can be used for analysis of any other similar heat transfer equipment.",
publisher = "Springer, New York",
journal = "Heat and Mass Transfer",
title = "Thermal performances of a "black box" heat exchanger in district heating system",
pages = "873-867",
number = "3",
volume = "54",
doi = "10.1007/s00231-017-2182-5"
}

Genić, S., Jaćimović, B. M., Milovančević, U., Ivošević, M., Otović, M.,& Antić, M. I.. (2018). Thermal performances of a "black box" heat exchanger in district heating system. in Heat and Mass Transfer
Springer, New York., 54(3), 867-873.
https://doi.org/10.1007/s00231-017-2182-5

Genić S, Jaćimović BM, Milovančević U, Ivošević M, Otović M, Antić MI. Thermal performances of a "black box" heat exchanger in district heating system. in Heat and Mass Transfer. 2018;54(3):867-873.
doi:10.1007/s00231-017-2182-5 .

Genić, Srbislav, Jaćimović, Branislav M., Milovančević, Uroš, Ivošević, Miloš, Otović, Milena, Antić, Milan I., "Thermal performances of a "black box" heat exchanger in district heating system" in Heat and Mass Transfer, 54, no. 3 (2018):867-873,
https://doi.org/10.1007/s00231-017-2182-5 . .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Lelea, Dorin
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3927
AB  - Paper presents an analysis of existing correlations for laminar liquid flow and heat transfer in tubes based on the published theoretical research and experimental data. Considering the relatively large deviation of existing correlations from the experimental data, the novel correlation for laminar heat transfer in tubes is proposed. The new correlation covers large range of tube diameters ranging from micro-scale level 125.4 mu m to conventional diameter 20.8 mm, Graetz numbers up to 6500 and fluid to wall viscosity ratio 0.0048-11.7. Correlation ratio of the newly proposed relationship for a total number of 390 experimental runs is 96.6% and standard deviation is 16.2%. Moreover, correlation covers both the hydraulically and thermally undeveloped and developed flows and all cases of boundary conditions that can be met in industrial applications.
PB  - Taylor & Francis Inc, Philadelphia
T2  - Heat Transfer Engineering
T1  - Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications
EP  - 1800
IS  - 20
SP  - 1794
VL  - 39
DO  - 10.1080/01457632.2017.1388949
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Lelea, Dorin",
year = "2018",
abstract = "Paper presents an analysis of existing correlations for laminar liquid flow and heat transfer in tubes based on the published theoretical research and experimental data. Considering the relatively large deviation of existing correlations from the experimental data, the novel correlation for laminar heat transfer in tubes is proposed. The new correlation covers large range of tube diameters ranging from micro-scale level 125.4 mu m to conventional diameter 20.8 mm, Graetz numbers up to 6500 and fluid to wall viscosity ratio 0.0048-11.7. Correlation ratio of the newly proposed relationship for a total number of 390 experimental runs is 96.6% and standard deviation is 16.2%. Moreover, correlation covers both the hydraulically and thermally undeveloped and developed flows and all cases of boundary conditions that can be met in industrial applications.",
publisher = "Taylor & Francis Inc, Philadelphia",
journal = "Heat Transfer Engineering",
title = "Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications",
pages = "1800-1794",
number = "20",
volume = "39",
doi = "10.1080/01457632.2017.1388949"
}

Jaćimović, B. M., Genić, S.,& Lelea, D.. (2018). Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications. in Heat Transfer Engineering
Taylor & Francis Inc, Philadelphia., 39(20), 1794-1800.
https://doi.org/10.1080/01457632.2017.1388949

Jaćimović BM, Genić S, Lelea D. Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications. in Heat Transfer Engineering. 2018;39(20):1794-1800.
doi:10.1080/01457632.2017.1388949 .

Jaćimović, Branislav M., Genić, Srbislav, Lelea, Dorin, "Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications" in Heat Transfer Engineering, 39, no. 20 (2018):1794-1800,
https://doi.org/10.1080/01457632.2017.1388949 . .

TY  - JOUR
AU  - Petrović, Andrija
AU  - Jovanović, Miloš Z.
AU  - Genić, Srbislav
AU  - Bugarić, Uglješa
AU  - Delibasić, Boris
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2903
AB  - The application of supersonic gas ejector with variable area nozzle can be found in different industries. However, due to different types of variable area nozzle, performance prediction is mainly focused on costly numerical simulations. In this paper, one-dimensional models for performance prediction of variable area gas ejector with specially designed nozzle, were compared. Additionally, operational lines and corresponding modes were analyzed. Two different variable area ejectors were experimentally tested. The first ejector used natural gas as motive fluid, whereas in the second one motive gas was the composition of alkane. Six distinct correlations of ejector component efficiencies were evaluated. Sum of absolute relative errors and coefficient of determination were used as goodness of fit criteria. The results showed that best model has coefficient of determination 0.76 and 0.63 in the case of natural and R2 gas as motive fluids, respectively. In order to improve prediction performances of entrainment ratio, the mixture of experts machine learning technique was used. Moreover, the results of obtained conditional probabilities of models are visualized in space spanned by area and pressure ratios. The presented analysis showed that one model is not generally better than others and can be improved by using an ensemble of models.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Energy
T1  - Evaluating performances of 1-D models to predict variable area supersonic gas ejector performances
EP  - 289
SP  - 270
VL  - 163
DO  - 10.1016/j.energy.2018.08.115
ER  - 

@article{
author = "Petrović, Andrija and Jovanović, Miloš Z. and Genić, Srbislav and Bugarić, Uglješa and Delibasić, Boris",
year = "2018",
abstract = "The application of supersonic gas ejector with variable area nozzle can be found in different industries. However, due to different types of variable area nozzle, performance prediction is mainly focused on costly numerical simulations. In this paper, one-dimensional models for performance prediction of variable area gas ejector with specially designed nozzle, were compared. Additionally, operational lines and corresponding modes were analyzed. Two different variable area ejectors were experimentally tested. The first ejector used natural gas as motive fluid, whereas in the second one motive gas was the composition of alkane. Six distinct correlations of ejector component efficiencies were evaluated. Sum of absolute relative errors and coefficient of determination were used as goodness of fit criteria. The results showed that best model has coefficient of determination 0.76 and 0.63 in the case of natural and R2 gas as motive fluids, respectively. In order to improve prediction performances of entrainment ratio, the mixture of experts machine learning technique was used. Moreover, the results of obtained conditional probabilities of models are visualized in space spanned by area and pressure ratios. The presented analysis showed that one model is not generally better than others and can be improved by using an ensemble of models.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Energy",
title = "Evaluating performances of 1-D models to predict variable area supersonic gas ejector performances",
pages = "289-270",
volume = "163",
doi = "10.1016/j.energy.2018.08.115"
}

Petrović, A., Jovanović, M. Z., Genić, S., Bugarić, U.,& Delibasić, B.. (2018). Evaluating performances of 1-D models to predict variable area supersonic gas ejector performances. in Energy
Pergamon-Elsevier Science Ltd, Oxford., 163, 270-289.
https://doi.org/10.1016/j.energy.2018.08.115

Petrović A, Jovanović MZ, Genić S, Bugarić U, Delibasić B. Evaluating performances of 1-D models to predict variable area supersonic gas ejector performances. in Energy. 2018;163:270-289.
doi:10.1016/j.energy.2018.08.115 .

Petrović, Andrija, Jovanović, Miloš Z., Genić, Srbislav, Bugarić, Uglješa, Delibasić, Boris, "Evaluating performances of 1-D models to predict variable area supersonic gas ejector performances" in Energy, 163 (2018):270-289,
https://doi.org/10.1016/j.energy.2018.08.115 . .

TY  - JOUR
AU  - Otović, Milena
AU  - Mihailović, Miloš
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav M.
AU  - Milovančević, Uroš
AU  - Marković, Sasa
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2870
AB  - This paper deals with heat exchangers having plain finned tubes in staggered (triangular) pattern. The objective of this paper is to provide the heat transfer and friction factor correlation which can be used in engineering practice. For this purpose, the experimental data of several (most cited) authors who deal with this type of heat exchangers are used. The new correlations are established to predict the air-side heat transfer coefficient and friction factor as a function of the Reynolds number and geometric variables of the heat exchanger - tube diameter, tube pitch, fin spacing, tube rows, etc. In those correlations the characteristic dimension in Reynolds number is calculated by using the new parameter - volumetric porosity. Also, there are given the errors of those correlations.
PB  - Springer, New York
T2  - Heat and Mass Transfer
T1  - Reconsideration of data and correlations for plate finned-tube heat exchangers
EP  - 2994
IS  - 10
SP  - 2987
VL  - 54
DO  - 10.1007/s00231-018-2328-0
ER  - 

@article{
author = "Otović, Milena and Mihailović, Miloš and Genić, Srbislav and Jaćimović, Branislav M. and Milovančević, Uroš and Marković, Sasa",
year = "2018",
abstract = "This paper deals with heat exchangers having plain finned tubes in staggered (triangular) pattern. The objective of this paper is to provide the heat transfer and friction factor correlation which can be used in engineering practice. For this purpose, the experimental data of several (most cited) authors who deal with this type of heat exchangers are used. The new correlations are established to predict the air-side heat transfer coefficient and friction factor as a function of the Reynolds number and geometric variables of the heat exchanger - tube diameter, tube pitch, fin spacing, tube rows, etc. In those correlations the characteristic dimension in Reynolds number is calculated by using the new parameter - volumetric porosity. Also, there are given the errors of those correlations.",
publisher = "Springer, New York",
journal = "Heat and Mass Transfer",
title = "Reconsideration of data and correlations for plate finned-tube heat exchangers",
pages = "2994-2987",
number = "10",
volume = "54",
doi = "10.1007/s00231-018-2328-0"
}

Otović, M., Mihailović, M., Genić, S., Jaćimović, B. M., Milovančević, U.,& Marković, S.. (2018). Reconsideration of data and correlations for plate finned-tube heat exchangers. in Heat and Mass Transfer
Springer, New York., 54(10), 2987-2994.
https://doi.org/10.1007/s00231-018-2328-0

Otović M, Mihailović M, Genić S, Jaćimović BM, Milovančević U, Marković S. Reconsideration of data and correlations for plate finned-tube heat exchangers. in Heat and Mass Transfer. 2018;54(10):2987-2994.
doi:10.1007/s00231-018-2328-0 .

Otović, Milena, Mihailović, Miloš, Genić, Srbislav, Jaćimović, Branislav M., Milovančević, Uroš, Marković, Sasa, "Reconsideration of data and correlations for plate finned-tube heat exchangers" in Heat and Mass Transfer, 54, no. 10 (2018):2987-2994,
https://doi.org/10.1007/s00231-018-2328-0 . .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Lelea, Dorin
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2889
AB  - Paper presents an analysis of existing correlations for laminar liquid flow and heat transfer in tubes based on the published theoretical research and experimental data. Considering the relatively large deviation of existing correlations from the experimental data, the novel correlation for laminar heat transfer in tubes is proposed. The new correlation covers large range of tube diameters ranging from micro-scale level 125.4 mu m to conventional diameter 20.8 mm, Graetz numbers up to 6500 and fluid to wall viscosity ratio 0.0048-11.7. Correlation ratio of the newly proposed relationship for a total number of 390 experimental runs is 96.6% and standard deviation is 16.2%. Moreover, correlation covers both the hydraulically and thermally undeveloped and developed flows and all cases of boundary conditions that can be met in industrial applications.
PB  - Taylor & Francis Inc, Philadelphia
T2  - Heat Transfer Engineering
T1  - Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications
EP  - 1800
IS  - 20
SP  - 1794
VL  - 39
DO  - 10.1080/01457632.2017.1388949
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Lelea, Dorin",
year = "2018",
abstract = "Paper presents an analysis of existing correlations for laminar liquid flow and heat transfer in tubes based on the published theoretical research and experimental data. Considering the relatively large deviation of existing correlations from the experimental data, the novel correlation for laminar heat transfer in tubes is proposed. The new correlation covers large range of tube diameters ranging from micro-scale level 125.4 mu m to conventional diameter 20.8 mm, Graetz numbers up to 6500 and fluid to wall viscosity ratio 0.0048-11.7. Correlation ratio of the newly proposed relationship for a total number of 390 experimental runs is 96.6% and standard deviation is 16.2%. Moreover, correlation covers both the hydraulically and thermally undeveloped and developed flows and all cases of boundary conditions that can be met in industrial applications.",
publisher = "Taylor & Francis Inc, Philadelphia",
journal = "Heat Transfer Engineering",
title = "Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications",
pages = "1800-1794",
number = "20",
volume = "39",
doi = "10.1080/01457632.2017.1388949"
}

Jaćimović, B. M., Genić, S.,& Lelea, D.. (2018). Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications. in Heat Transfer Engineering
Taylor & Francis Inc, Philadelphia., 39(20), 1794-1800.
https://doi.org/10.1080/01457632.2017.1388949

Jaćimović BM, Genić S, Lelea D. Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications. in Heat Transfer Engineering. 2018;39(20):1794-1800.
doi:10.1080/01457632.2017.1388949 .

Jaćimović, Branislav M., Genić, Srbislav, Lelea, Dorin, "Calculation of the Heat Transfer Coefficient for Laminar Flow in Pipes in Practical Engineering Applications" in Heat Transfer Engineering, 39, no. 20 (2018):1794-1800,
https://doi.org/10.1080/01457632.2017.1388949 . .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2928
AB  - In this paper we have reexamined the published correlations for T-P-x-y data in order to obtain statistical proof that the correlations are in accordance with the databanks found in the open literature. In this process few new correlations were found to be with better accordance with data banks. After re-considerations we have concluded that new correlations proposed hereby have to be given the preference rather than the previously published correlations.
PB  - Elsevier Science Bv, Amsterdam
T2  - Fluid Phase Equilibria
T1  - Reconsideration of T-P-x-y data and correlations for ammonia water mixture for pressures up to 100 bar
EP  - 68
SP  - 62
VL  - 463
DO  - 10.1016/j.fluid.2018.02.007
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav",
year = "2018",
abstract = "In this paper we have reexamined the published correlations for T-P-x-y data in order to obtain statistical proof that the correlations are in accordance with the databanks found in the open literature. In this process few new correlations were found to be with better accordance with data banks. After re-considerations we have concluded that new correlations proposed hereby have to be given the preference rather than the previously published correlations.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Fluid Phase Equilibria",
title = "Reconsideration of T-P-x-y data and correlations for ammonia water mixture for pressures up to 100 bar",
pages = "68-62",
volume = "463",
doi = "10.1016/j.fluid.2018.02.007"
}

Jaćimović, B. M.,& Genić, S.. (2018). Reconsideration of T-P-x-y data and correlations for ammonia water mixture for pressures up to 100 bar. in Fluid Phase Equilibria
Elsevier Science Bv, Amsterdam., 463, 62-68.
https://doi.org/10.1016/j.fluid.2018.02.007

Jaćimović BM, Genić S. Reconsideration of T-P-x-y data and correlations for ammonia water mixture for pressures up to 100 bar. in Fluid Phase Equilibria. 2018;463:62-68.
doi:10.1016/j.fluid.2018.02.007 .

Jaćimović, Branislav M., Genić, Srbislav, "Reconsideration of T-P-x-y data and correlations for ammonia water mixture for pressures up to 100 bar" in Fluid Phase Equilibria, 463 (2018):62-68,
https://doi.org/10.1016/j.fluid.2018.02.007 . .

TY  - JOUR
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav M.
AU  - Petrović, Andrija
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2927
AB  - In this paperwork, a novel methodology of entropy generation minimization (EGM) for counter-current and cocurrent heat exchangers is developed. The methodology can be applied in general case for all types of the heat exchangers with the counter-current and co-current flow configuration. A number of entropy generation units (NEGU) function, along with its pressure drop and temperature difference components, are presented. Additionally, evaluated EGM can be easily incorporated into some optimization algorithms for industrial practice. Beside of the theoretical background, on an example and case study were proved that the EGM analysis could be useful in practical applications of heat exchanger optimization. Furthermore, the correlation between the minimum value of NEGU and minimum of total annual costs (operational and investment costs) have been shown. Based on the EGM methodology, on a case study was presented that pressure drop of the plate countercurrent heat exchangers in series should be 36 kPa, in order to achieve minimal annual costs of the 456 EUR/year. The result corresponds to the heat exchangers in series with 2 sections and 46 plates per section.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Applied Thermal Engineering
T1  - A novel method for combined entropy generation and economic optimization of counter-current and co-current heat exchangers
EP  - 334
SP  - 327
VL  - 136
DO  - 10.1016/j.applthermaleng.2018.03.026
ER  - 

@article{
author = "Genić, Srbislav and Jaćimović, Branislav M. and Petrović, Andrija",
year = "2018",
abstract = "In this paperwork, a novel methodology of entropy generation minimization (EGM) for counter-current and cocurrent heat exchangers is developed. The methodology can be applied in general case for all types of the heat exchangers with the counter-current and co-current flow configuration. A number of entropy generation units (NEGU) function, along with its pressure drop and temperature difference components, are presented. Additionally, evaluated EGM can be easily incorporated into some optimization algorithms for industrial practice. Beside of the theoretical background, on an example and case study were proved that the EGM analysis could be useful in practical applications of heat exchanger optimization. Furthermore, the correlation between the minimum value of NEGU and minimum of total annual costs (operational and investment costs) have been shown. Based on the EGM methodology, on a case study was presented that pressure drop of the plate countercurrent heat exchangers in series should be 36 kPa, in order to achieve minimal annual costs of the 456 EUR/year. The result corresponds to the heat exchangers in series with 2 sections and 46 plates per section.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Applied Thermal Engineering",
title = "A novel method for combined entropy generation and economic optimization of counter-current and co-current heat exchangers",
pages = "334-327",
volume = "136",
doi = "10.1016/j.applthermaleng.2018.03.026"
}

Genić, S., Jaćimović, B. M.,& Petrović, A.. (2018). A novel method for combined entropy generation and economic optimization of counter-current and co-current heat exchangers. in Applied Thermal Engineering
Pergamon-Elsevier Science Ltd, Oxford., 136, 327-334.
https://doi.org/10.1016/j.applthermaleng.2018.03.026

Genić S, Jaćimović BM, Petrović A. A novel method for combined entropy generation and economic optimization of counter-current and co-current heat exchangers. in Applied Thermal Engineering. 2018;136:327-334.
doi:10.1016/j.applthermaleng.2018.03.026 .

Genić, Srbislav, Jaćimović, Branislav M., Petrović, Andrija, "A novel method for combined entropy generation and economic optimization of counter-current and co-current heat exchangers" in Applied Thermal Engineering, 136 (2018):327-334,
https://doi.org/10.1016/j.applthermaleng.2018.03.026 . .

TY  - JOUR
AU  - Genić, Srbislav
AU  - Aćimović, Branislav
AU  - Manić, Nebojša
AU  - Marković, Saša
PY  - 2017
UR  - https://izdanja.smeits.rs/index.php/ptk/article/view/2585
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6588
AB  - Cilj ovog teksta je sistematizacija osnovnih principa inženjerske etike, čije poznavanje može biti od koristi inženjerima kada postoji moralna dilema ili profesionalni konflikt. Ovo je skraćerni oblik predavanja koje je održano u dva navrata u SMEITS-u.
T2  - Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing
T2  - Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing
T1  - Inženjerska etika
EP  - 36
IS  - 1
SP  - 33
DO  - 10.24094/ptk.017.30.1.33
ER  - 

@article{
author = "Genić, Srbislav and Aćimović, Branislav and Manić, Nebojša and Marković, Saša",
year = "2017",
abstract = "Cilj ovog teksta je sistematizacija osnovnih principa inženjerske etike, čije poznavanje može biti od koristi inženjerima kada postoji moralna dilema ili profesionalni konflikt. Ovo je skraćerni oblik predavanja koje je održano u dva navrata u SMEITS-u.",
journal = "Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing, Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing",
title = "Inženjerska etika",
pages = "36-33",
number = "1",
doi = "10.24094/ptk.017.30.1.33"
}

Genić, S., Aćimović, B., Manić, N.,& Marković, S.. (2017). Inženjerska etika. in Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing(1), 33-36.
https://doi.org/10.24094/ptk.017.30.1.33

Genić S, Aćimović B, Manić N, Marković S. Inženjerska etika. in Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing. 2017;(1):33-36.
doi:10.24094/ptk.017.30.1.33 .

Genić, Srbislav, Aćimović, Branislav, Manić, Nebojša, Marković, Saša, "Inženjerska etika" in Zbornik Međunarodnog kongresa o procesnoj industriji – Procesing, no. 1 (2017):33-36,
https://doi.org/10.24094/ptk.017.30.1.33 . .

TY  - JOUR
AU  - Tanasić, Nikola
AU  - Stamenić, Mirjana
AU  - Genić, Srbislav
AU  - Petrović, Aleksandar
AU  - Milivojević, M.
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6367
AB  - Posude sa komprimovanim vazduhom mogu na efektivan način da umanje pojavu prekomernog povišenja i smanjenja pritiska usled hidrauličnog udara u industrijskim cevovodima. U radu je prikazana pojednostavljena procedura za proračun zapremine posude koju zauzima vazduh i ukupne zapremine posude. U radu su date preporuke za pravilan izbor dimenzija ulaznog i izlaznog cevnog priključka na posudi čime se može minimizirati njena zapremina.
PB  - Savez mašinskih i elektroinženjera i tehničara Srbije (SMEITS)
T2  - Procesna tehnika
T1  - Proračun posuda sa vazduhom za zaštitu cevovoda od hidrauličnog udara
EP  - 39
IS  - 2
SP  - 36
VL  - 29
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6367
ER  - 

@article{
author = "Tanasić, Nikola and Stamenić, Mirjana and Genić, Srbislav and Petrović, Aleksandar and Milivojević, M.",
year = "2017",
abstract = "Posude sa komprimovanim vazduhom mogu na efektivan način da umanje pojavu prekomernog povišenja i smanjenja pritiska usled hidrauličnog udara u industrijskim cevovodima. U radu je prikazana pojednostavljena procedura za proračun zapremine posude koju zauzima vazduh i ukupne zapremine posude. U radu su date preporuke za pravilan izbor dimenzija ulaznog i izlaznog cevnog priključka na posudi čime se može minimizirati njena zapremina.",
publisher = "Savez mašinskih i elektroinženjera i tehničara Srbije (SMEITS)",
journal = "Procesna tehnika",
title = "Proračun posuda sa vazduhom za zaštitu cevovoda od hidrauličnog udara",
pages = "39-36",
number = "2",
volume = "29",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6367"
}

Tanasić, N., Stamenić, M., Genić, S., Petrović, A.,& Milivojević, M.. (2017). Proračun posuda sa vazduhom za zaštitu cevovoda od hidrauličnog udara. in Procesna tehnika
Savez mašinskih i elektroinženjera i tehničara Srbije (SMEITS)., 29(2), 36-39.
https://hdl.handle.net/21.15107/rcub_machinery_6367

Tanasić N, Stamenić M, Genić S, Petrović A, Milivojević M. Proračun posuda sa vazduhom za zaštitu cevovoda od hidrauličnog udara. in Procesna tehnika. 2017;29(2):36-39.
https://hdl.handle.net/21.15107/rcub_machinery_6367 .

Tanasić, Nikola, Stamenić, Mirjana, Genić, Srbislav, Petrović, Aleksandar, Milivojević, M., "Proračun posuda sa vazduhom za zaštitu cevovoda od hidrauličnog udara" in Procesna tehnika, 29, no. 2 (2017):36-39,
https://hdl.handle.net/21.15107/rcub_machinery_6367 .

TY  - JOUR
AU  - Jaćimović, Branislav M.
AU  - Genić, Srbislav
AU  - Budimir, Nikola
AU  - Jarić, Marko
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2637
AB  - This paper presents the techno-economic optimization of batch plant for production of rectified alcohol based on the concentration of ethanol in residue. The aim of the analysis was to determine the extent to which it is economically profitable to exhaust the residual liquid in boiler. The "profit production" criterion is used for calculations.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant
EP  - 2980
IS  - 6
SP  - 2971
VL  - 21
DO  - 10.2298/TSCI160601267J
ER  - 

@article{
author = "Jaćimović, Branislav M. and Genić, Srbislav and Budimir, Nikola and Jarić, Marko",
year = "2017",
abstract = "This paper presents the techno-economic optimization of batch plant for production of rectified alcohol based on the concentration of ethanol in residue. The aim of the analysis was to determine the extent to which it is economically profitable to exhaust the residual liquid in boiler. The "profit production" criterion is used for calculations.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant",
pages = "2980-2971",
number = "6",
volume = "21",
doi = "10.2298/TSCI160601267J"
}

Jaćimović, B. M., Genić, S., Budimir, N.,& Jarić, M.. (2017). Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 21(6), 2971-2980.
https://doi.org/10.2298/TSCI160601267J

Jaćimović BM, Genić S, Budimir N, Jarić M. Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant. in Thermal Science. 2017;21(6):2971-2980.
doi:10.2298/TSCI160601267J .

Jaćimović, Branislav M., Genić, Srbislav, Budimir, Nikola, Jarić, Marko, "Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant" in Thermal Science, 21, no. 6 (2017):2971-2980,
https://doi.org/10.2298/TSCI160601267J . .

TY  - CONF
AU  - Milovančević, Uroš
AU  - Genić, Srbislav
AU  - Otović, Milena
AU  - Stevanović, Snežana M.
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/5538
AB  - The paper deals with the problems of measurement of respective operating parameters of air cooler with finned tubes. It is given a PI diagram of the tested refrigeration system. The most important geometrical characteristics of this heat exchanger are shown. Experimental work included measurement of thermal performance on a physical model – the heat exchanger, which cooled the air by using secondary refrigerant, which has not changed phase flowing through the pipes. Flow rates and temperatures of working fluids were varied in defined operating ranges of experimental installation, which were sufficient to make generalization of experimentally obtained data. In conclusion, it is given the most important results that were obtained during the experimental and mathematical analysis of this exchanger in terms of cooling and drying air.
PB  - Beograd: SMEITS
C3  - Zbornik 47. Međunarodnog kongresa o KGH
T1  - PERFORMANCES INVESTIGATION OF FINNED TUBE AIR COOLER
UR  - https://hdl.handle.net/21.15107/rcub_machinery_5538
ER  - 

@conference{
author = "Milovančević, Uroš and Genić, Srbislav and Otović, Milena and Stevanović, Snežana M.",
year = "2016",
abstract = "The paper deals with the problems of measurement of respective operating parameters of air cooler with finned tubes. It is given a PI diagram of the tested refrigeration system. The most important geometrical characteristics of this heat exchanger are shown. Experimental work included measurement of thermal performance on a physical model – the heat exchanger, which cooled the air by using secondary refrigerant, which has not changed phase flowing through the pipes. Flow rates and temperatures of working fluids were varied in defined operating ranges of experimental installation, which were sufficient to make generalization of experimentally obtained data. In conclusion, it is given the most important results that were obtained during the experimental and mathematical analysis of this exchanger in terms of cooling and drying air.",
publisher = "Beograd: SMEITS",
journal = "Zbornik 47. Međunarodnog kongresa o KGH",
title = "PERFORMANCES INVESTIGATION OF FINNED TUBE AIR COOLER",
url = "https://hdl.handle.net/21.15107/rcub_machinery_5538"
}

Milovančević, U., Genić, S., Otović, M.,& Stevanović, S. M.. (2016). PERFORMANCES INVESTIGATION OF FINNED TUBE AIR COOLER. in Zbornik 47. Međunarodnog kongresa o KGH
Beograd: SMEITS..
https://hdl.handle.net/21.15107/rcub_machinery_5538

Milovančević U, Genić S, Otović M, Stevanović SM. PERFORMANCES INVESTIGATION OF FINNED TUBE AIR COOLER. in Zbornik 47. Međunarodnog kongresa o KGH. 2016;.
https://hdl.handle.net/21.15107/rcub_machinery_5538 .

Milovančević, Uroš, Genić, Srbislav, Otović, Milena, Stevanović, Snežana M., "PERFORMANCES INVESTIGATION OF FINNED TUBE AIR COOLER" in Zbornik 47. Međunarodnog kongresa o KGH (2016),
https://hdl.handle.net/21.15107/rcub_machinery_5538 .

TY  - JOUR
AU  - Radanov, Branka B.
AU  - Genić, Srbislav
AU  - Jaćimović, Branislav M.
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2481
AB  - This article presents the research results of direct contact condensation of steam on freely formed falling liquid jets. After the comparison of experimental data and open literature correlations it was concluded that published correlations does not provide accurate coverage of experimental data. A new correlation was established in the following form Nu= center dot[Re-L(1.175) center dot (mu(L)/mu(W))(1.175) + 17740] center dot We(G)(0.086)center dot Fr-L(0.023) center dot Ku(W)(1.14)/We(W)(0.098) center dot Pr-W(1.8). center dot(rho(L)/rho(W))(0.097) center dot (sigma(L)/sigma(W))(-0.12) center dot phi(H-LG/d(h))
PB  - Wiley, Hoboken
T2  - Aiche Journal
T1  - Heat Transfer Coefficient for Condensation of Steam on Freely Formed Falling Liquid Jets
EP  - 2584
IS  - 7
SP  - 2579
VL  - 62
DO  - 10.1002/aic.15233
ER  - 

@article{
author = "Radanov, Branka B. and Genić, Srbislav and Jaćimović, Branislav M.",
year = "2016",
abstract = "This article presents the research results of direct contact condensation of steam on freely formed falling liquid jets. After the comparison of experimental data and open literature correlations it was concluded that published correlations does not provide accurate coverage of experimental data. A new correlation was established in the following form Nu= center dot[Re-L(1.175) center dot (mu(L)/mu(W))(1.175) + 17740] center dot We(G)(0.086)center dot Fr-L(0.023) center dot Ku(W)(1.14)/We(W)(0.098) center dot Pr-W(1.8). center dot(rho(L)/rho(W))(0.097) center dot (sigma(L)/sigma(W))(-0.12) center dot phi(H-LG/d(h))",
publisher = "Wiley, Hoboken",
journal = "Aiche Journal",
title = "Heat Transfer Coefficient for Condensation of Steam on Freely Formed Falling Liquid Jets",
pages = "2584-2579",
number = "7",
volume = "62",
doi = "10.1002/aic.15233"
}

Radanov, B. B., Genić, S.,& Jaćimović, B. M.. (2016). Heat Transfer Coefficient for Condensation of Steam on Freely Formed Falling Liquid Jets. in Aiche Journal
Wiley, Hoboken., 62(7), 2579-2584.
https://doi.org/10.1002/aic.15233

Radanov BB, Genić S, Jaćimović BM. Heat Transfer Coefficient for Condensation of Steam on Freely Formed Falling Liquid Jets. in Aiche Journal. 2016;62(7):2579-2584.
doi:10.1002/aic.15233 .

Radanov, Branka B., Genić, Srbislav, Jaćimović, Branislav M., "Heat Transfer Coefficient for Condensation of Steam on Freely Formed Falling Liquid Jets" in Aiche Journal, 62, no. 7 (2016):2579-2584,
https://doi.org/10.1002/aic.15233 . .