TY  - JOUR
AU  - Djokić, Dragoslav
AU  - Srećković, Milesa
AU  - Fidanovski, Zoran
AU  - Ilić, Jelena
AU  - Stanisavljević, Rade
AU  - Terzić, Dragan
AU  - Marković, Jordan
AU  - Barac, Sasa
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2696
AB  - Sainfoin seeds were irradiated by four different lasers (He-Ne laser, three semiconductor lasers of wavelengths 670 nm, 890 nm and of wavelength range 630-680 nm). Each group of seed was irradiated only once, using different exposure times: 1-, 2-, 3- and 4- minutes. The same procedure was applied before autumn (four months post-harvest) and spring sowing (eight months post-harvest). Laser bio-stimulation showed that the optimal operation of the laser was at 890 nm using 3- minutes exposure time in both sowing periods. Slightly weaker, but also significant (p >= 0.01) impact on improving germination was in case of laser of 890 nm using 2- and 4- minutes of exposure time, and 630-680 nm laser using 4- minutes exposure time in both sowing periods. In the spring sowing, only laser of 632.8 nm using 3- minutes exposure time and laser of 670 nm laser between 2- and 4- minutes exposure time had significant improvement of seed germination. In the autumn sowing, He-Ne lasers (632.8 nm) using 4-minutes exposure time, semiconductor lasers of 670 nm laser using 3- minutes exposure time, and 630-680 nm laser using 3-minutes exposure time, also significantly (p >= 0.01) increased seed germination compared to control.
PB  - Pakistan Agricultural Scientists Forum
T2  - Journal of Animal and Plant Sciences
T1  - Influence of pre-sowing he-ne and semiconductor laser stimulation on sainfoin seeds germination four and eight months post-harvest
EP  - 900
IS  - 3
SP  - 894
VL  - 27
UR  - https://hdl.handle.net/21.15107/rcub_machinery_2696
ER  - 

@article{
author = "Djokić, Dragoslav and Srećković, Milesa and Fidanovski, Zoran and Ilić, Jelena and Stanisavljević, Rade and Terzić, Dragan and Marković, Jordan and Barac, Sasa",
year = "2017",
abstract = "Sainfoin seeds were irradiated by four different lasers (He-Ne laser, three semiconductor lasers of wavelengths 670 nm, 890 nm and of wavelength range 630-680 nm). Each group of seed was irradiated only once, using different exposure times: 1-, 2-, 3- and 4- minutes. The same procedure was applied before autumn (four months post-harvest) and spring sowing (eight months post-harvest). Laser bio-stimulation showed that the optimal operation of the laser was at 890 nm using 3- minutes exposure time in both sowing periods. Slightly weaker, but also significant (p >= 0.01) impact on improving germination was in case of laser of 890 nm using 2- and 4- minutes of exposure time, and 630-680 nm laser using 4- minutes exposure time in both sowing periods. In the spring sowing, only laser of 632.8 nm using 3- minutes exposure time and laser of 670 nm laser between 2- and 4- minutes exposure time had significant improvement of seed germination. In the autumn sowing, He-Ne lasers (632.8 nm) using 4-minutes exposure time, semiconductor lasers of 670 nm laser using 3- minutes exposure time, and 630-680 nm laser using 3-minutes exposure time, also significantly (p >= 0.01) increased seed germination compared to control.",
publisher = "Pakistan Agricultural Scientists Forum",
journal = "Journal of Animal and Plant Sciences",
title = "Influence of pre-sowing he-ne and semiconductor laser stimulation on sainfoin seeds germination four and eight months post-harvest",
pages = "900-894",
number = "3",
volume = "27",
url = "https://hdl.handle.net/21.15107/rcub_machinery_2696"
}

Djokić, D., Srećković, M., Fidanovski, Z., Ilić, J., Stanisavljević, R., Terzić, D., Marković, J.,& Barac, S.. (2017). Influence of pre-sowing he-ne and semiconductor laser stimulation on sainfoin seeds germination four and eight months post-harvest. in Journal of Animal and Plant Sciences
Pakistan Agricultural Scientists Forum., 27(3), 894-900.
https://hdl.handle.net/21.15107/rcub_machinery_2696

Djokić D, Srećković M, Fidanovski Z, Ilić J, Stanisavljević R, Terzić D, Marković J, Barac S. Influence of pre-sowing he-ne and semiconductor laser stimulation on sainfoin seeds germination four and eight months post-harvest. in Journal of Animal and Plant Sciences. 2017;27(3):894-900.
https://hdl.handle.net/21.15107/rcub_machinery_2696 .

Djokić, Dragoslav, Srećković, Milesa, Fidanovski, Zoran, Ilić, Jelena, Stanisavljević, Rade, Terzić, Dragan, Marković, Jordan, Barac, Sasa, "Influence of pre-sowing he-ne and semiconductor laser stimulation on sainfoin seeds germination four and eight months post-harvest" in Journal of Animal and Plant Sciences, 27, no. 3 (2017):894-900,
https://hdl.handle.net/21.15107/rcub_machinery_2696 .

TY  - JOUR
AU  - Ilić, Jelena
AU  - Ristić, Slavica
AU  - Srećković, Milesa
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2631
AB  - Finding the mode, in which two component laser Doppler velocimetry can be applied to flows confined in cylindrical tubes or vessels, was the aim of this study. We have identified principle issues that influence the propagation of laser beams in laser Doppler velocimetry system, applied to flow confined in cylindrical tube. Among them, the most important are influences of fluid and wall refractive indices, wall thickness and internal radius ratio and beam intersection angle. In analysis of the degrees of these influences, we have applied mathematical model, based on geometrical optics. The separation of measurement volumes, that measure different velocity components, has been recognized as the main drawback. To overcome this, we propose a lens with dual focal length primary focal length for the measurement of one velocity component and secondary focal length for the measurement of the other velocity component. We present here the procedure for calculating the optimal value of secondary focal length, depending on experimental set-up parameters. The mathematical simulation of the application of the dual focal length lens, for chosen cases presented here, confirmed the accuracy of the proposed procedure.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Laser doppler velocimetry and confined flows
EP  - S836
IS  - Suppl. 3
SP  - S825
VL  - 21
DO  - 10.2298/TSCI160720278I
ER  - 

@article{
author = "Ilić, Jelena and Ristić, Slavica and Srećković, Milesa",
year = "2017",
abstract = "Finding the mode, in which two component laser Doppler velocimetry can be applied to flows confined in cylindrical tubes or vessels, was the aim of this study. We have identified principle issues that influence the propagation of laser beams in laser Doppler velocimetry system, applied to flow confined in cylindrical tube. Among them, the most important are influences of fluid and wall refractive indices, wall thickness and internal radius ratio and beam intersection angle. In analysis of the degrees of these influences, we have applied mathematical model, based on geometrical optics. The separation of measurement volumes, that measure different velocity components, has been recognized as the main drawback. To overcome this, we propose a lens with dual focal length primary focal length for the measurement of one velocity component and secondary focal length for the measurement of the other velocity component. We present here the procedure for calculating the optimal value of secondary focal length, depending on experimental set-up parameters. The mathematical simulation of the application of the dual focal length lens, for chosen cases presented here, confirmed the accuracy of the proposed procedure.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Laser doppler velocimetry and confined flows",
pages = "S836-S825",
number = "Suppl. 3",
volume = "21",
doi = "10.2298/TSCI160720278I"
}

Ilić, J., Ristić, S.,& Srećković, M.. (2017). Laser doppler velocimetry and confined flows. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 21(Suppl. 3), S825-S836.
https://doi.org/10.2298/TSCI160720278I

Ilić J, Ristić S, Srećković M. Laser doppler velocimetry and confined flows. in Thermal Science. 2017;21(Suppl. 3):S825-S836.
doi:10.2298/TSCI160720278I .

Ilić, Jelena, Ristić, Slavica, Srećković, Milesa, "Laser doppler velocimetry and confined flows" in Thermal Science, 21, no. Suppl. 3 (2017):S825-S836,
https://doi.org/10.2298/TSCI160720278I . .

TY  - JOUR
AU  - Zivković, Monika M.
AU  - Srećković, Milesa
AU  - Stojić, Tomislav
AU  - Bokić, Bojana
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2541
AB  - Contemporary medicine (biomedicine) cannot be imagined without diagnostics and therapeutic methods based on nuclear, laser, acoustical and other processes. The application of these methods is linked to common computer support, signal processing, measuring monitoring techniques, high degree of automatization, and image analyses. The paper analysed contemporary technical issues related to neonatology, ophthalmology, based on the influence of nuclear radiation and laser beams. Some statistical processing and presentations of results obtained in the IGA KCS Hospital, Belgrade, Serbia, in curing vision of prenatal type new-borns with a different degree of pathological state of retinopathy of prematurity are presented. The general conclusion is that, in spite of the good results, a multidisciplinary approach is needed for a deeper understanding of the role of lasers and laser techniques in medicine as well as possible couplings. Potential new applications of lasers important for the fields of neonatology and ophthalmology were also considered.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Nuclear Technology & Radiation Protection
T1  - Influence of electromagnetic and nuclear radiation in medicine for therapy and diagnosis through processes, facts and statistical analysis
EP  - 98
IS  - 1
SP  - 91
VL  - 32
DO  - 10.2298/NTRP1701091Z
ER  - 

@article{
author = "Zivković, Monika M. and Srećković, Milesa and Stojić, Tomislav and Bokić, Bojana",
year = "2017",
abstract = "Contemporary medicine (biomedicine) cannot be imagined without diagnostics and therapeutic methods based on nuclear, laser, acoustical and other processes. The application of these methods is linked to common computer support, signal processing, measuring monitoring techniques, high degree of automatization, and image analyses. The paper analysed contemporary technical issues related to neonatology, ophthalmology, based on the influence of nuclear radiation and laser beams. Some statistical processing and presentations of results obtained in the IGA KCS Hospital, Belgrade, Serbia, in curing vision of prenatal type new-borns with a different degree of pathological state of retinopathy of prematurity are presented. The general conclusion is that, in spite of the good results, a multidisciplinary approach is needed for a deeper understanding of the role of lasers and laser techniques in medicine as well as possible couplings. Potential new applications of lasers important for the fields of neonatology and ophthalmology were also considered.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Nuclear Technology & Radiation Protection",
title = "Influence of electromagnetic and nuclear radiation in medicine for therapy and diagnosis through processes, facts and statistical analysis",
pages = "98-91",
number = "1",
volume = "32",
doi = "10.2298/NTRP1701091Z"
}

Zivković, M. M., Srećković, M., Stojić, T.,& Bokić, B.. (2017). Influence of electromagnetic and nuclear radiation in medicine for therapy and diagnosis through processes, facts and statistical analysis. in Nuclear Technology & Radiation Protection
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 32(1), 91-98.
https://doi.org/10.2298/NTRP1701091Z

Zivković MM, Srećković M, Stojić T, Bokić B. Influence of electromagnetic and nuclear radiation in medicine for therapy and diagnosis through processes, facts and statistical analysis. in Nuclear Technology & Radiation Protection. 2017;32(1):91-98.
doi:10.2298/NTRP1701091Z .

Zivković, Monika M., Srećković, Milesa, Stojić, Tomislav, Bokić, Bojana, "Influence of electromagnetic and nuclear radiation in medicine for therapy and diagnosis through processes, facts and statistical analysis" in Nuclear Technology & Radiation Protection, 32, no. 1 (2017):91-98,
https://doi.org/10.2298/NTRP1701091Z . .

TY  - JOUR
AU  - Srećković, Milesa
AU  - Ostojić, Stanko
AU  - Ilić, Jelena
AU  - Fidanovski, Zoran
AU  - Jevtić, Sonja
AU  - Knežević, Dragan
AU  - Obrenović, Marija D.
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2185
AB  - Photo and nuclear radiation induced processes are considered through the interaction of radiation with semiconducting, metallic and other materials, including the scintillator materials. The improvement of component efficiency by the use of quantum generators, trimming and hybrid processes with nuclear radiation has been analyzed. The studied processes can be positive or negative depending on application. Besides the experimental approach to the processes and chosen interactions, the analytical description of our experiments, as well as ones from other references, has been performed. The contemporary couplings between the nuclear physics, laser techniques and respective dosimetric aspects have been considered.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Nuclear Technology & Radiation Protection
T1  - Photoinduced processes, radiation interaction with material and damages - material hardness
EP  - 34
IS  - 1
SP  - 23
VL  - 30
DO  - 10.2298/NTRP1501023S
ER  - 

@article{
author = "Srećković, Milesa and Ostojić, Stanko and Ilić, Jelena and Fidanovski, Zoran and Jevtić, Sonja and Knežević, Dragan and Obrenović, Marija D.",
year = "2015",
abstract = "Photo and nuclear radiation induced processes are considered through the interaction of radiation with semiconducting, metallic and other materials, including the scintillator materials. The improvement of component efficiency by the use of quantum generators, trimming and hybrid processes with nuclear radiation has been analyzed. The studied processes can be positive or negative depending on application. Besides the experimental approach to the processes and chosen interactions, the analytical description of our experiments, as well as ones from other references, has been performed. The contemporary couplings between the nuclear physics, laser techniques and respective dosimetric aspects have been considered.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Nuclear Technology & Radiation Protection",
title = "Photoinduced processes, radiation interaction with material and damages - material hardness",
pages = "34-23",
number = "1",
volume = "30",
doi = "10.2298/NTRP1501023S"
}

Srećković, M., Ostojić, S., Ilić, J., Fidanovski, Z., Jevtić, S., Knežević, D.,& Obrenović, M. D.. (2015). Photoinduced processes, radiation interaction with material and damages - material hardness. in Nuclear Technology & Radiation Protection
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 30(1), 23-34.
https://doi.org/10.2298/NTRP1501023S

Srećković M, Ostojić S, Ilić J, Fidanovski Z, Jevtić S, Knežević D, Obrenović MD. Photoinduced processes, radiation interaction with material and damages - material hardness. in Nuclear Technology & Radiation Protection. 2015;30(1):23-34.
doi:10.2298/NTRP1501023S .

Srećković, Milesa, Ostojić, Stanko, Ilić, Jelena, Fidanovski, Zoran, Jevtić, Sonja, Knežević, Dragan, Obrenović, Marija D., "Photoinduced processes, radiation interaction with material and damages - material hardness" in Nuclear Technology & Radiation Protection, 30, no. 1 (2015):23-34,
https://doi.org/10.2298/NTRP1501023S . .

TY  - JOUR
AU  - Janićijević, Milovan
AU  - Srećković, Milesa
AU  - Kaluđerović, Branka
AU  - Dinulović, Mirko
AU  - Karastojković, Zoran
AU  - Jovanić, Predrag
AU  - Kovačević, Zorica
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2141
AB  - U ovom radu se analizira interakcija laserskih snopova sa ugljeničnim materijalom (staklasti ugljenik). Korišćen je Nd3+:YAG lasera (1.06 μm, odnosno bliska IC oblast) u ms režimu rada sa snopovima različitih gustina energije. U svim eksperimentima, u primenjenom režimu rada, uočene su površinske povrede na uzorku. Povrede nastale dejstvom lasera su analizirane optičkim i SEM mikroskopima. Program Image J je korišćen za kvantitativnu analizu nastalih povreda na osnovu mikrografa dobijenih optičkom i SEM mikroskopijom. Temperaturna raspodela u izloženom uzorku je dobijena numeričkom simulacijom zasnovanom na programskom paketu COMSOL Multiphysics 3.5 u ograničenom opsegu energija.
AB  - Laser beam interaction with carbon based material (glassy carbon) is analyzed in this paper. A Nd3+:YAG laser beam (1.06 μm, i.e., near infrared range (NIR)) in ms regime with various energy densities is used. In all experiments, provided in applied working regimes, surface damages have occurred. The results of laser damages are analyzed by light and scanning electron microscopy (SEM). Image J software is used for quantitative analysis of generated damages based on micrographs obtained by light and SEM microscopes. Temperature distribution in the exposed samples is evaluated by numerical simulations based on COMSOL Multiphysics 3.5 software in a limited energy range.
PB  - Savez hemijskih inženjera, Beograd
T2  - Chemical Industry & Chemical Engineering Quarterly
T1  - Procena interakcije laserskog snopa sa materijalom na bazi ugljenika - staklastim ugljenikom
T1  - Evaluation of laser beam interaction with carbon based material: Glassy carbon
EP  - 69
IS  - 1
SP  - 63
VL  - 21
DO  - 10.2298/CICEQ140131006J
ER  - 

@article{
author = "Janićijević, Milovan and Srećković, Milesa and Kaluđerović, Branka and Dinulović, Mirko and Karastojković, Zoran and Jovanić, Predrag and Kovačević, Zorica",
year = "2015",
abstract = "U ovom radu se analizira interakcija laserskih snopova sa ugljeničnim materijalom (staklasti ugljenik). Korišćen je Nd3+:YAG lasera (1.06 μm, odnosno bliska IC oblast) u ms režimu rada sa snopovima različitih gustina energije. U svim eksperimentima, u primenjenom režimu rada, uočene su površinske povrede na uzorku. Povrede nastale dejstvom lasera su analizirane optičkim i SEM mikroskopima. Program Image J je korišćen za kvantitativnu analizu nastalih povreda na osnovu mikrografa dobijenih optičkom i SEM mikroskopijom. Temperaturna raspodela u izloženom uzorku je dobijena numeričkom simulacijom zasnovanom na programskom paketu COMSOL Multiphysics 3.5 u ograničenom opsegu energija., Laser beam interaction with carbon based material (glassy carbon) is analyzed in this paper. A Nd3+:YAG laser beam (1.06 μm, i.e., near infrared range (NIR)) in ms regime with various energy densities is used. In all experiments, provided in applied working regimes, surface damages have occurred. The results of laser damages are analyzed by light and scanning electron microscopy (SEM). Image J software is used for quantitative analysis of generated damages based on micrographs obtained by light and SEM microscopes. Temperature distribution in the exposed samples is evaluated by numerical simulations based on COMSOL Multiphysics 3.5 software in a limited energy range.",
publisher = "Savez hemijskih inženjera, Beograd",
journal = "Chemical Industry & Chemical Engineering Quarterly",
title = "Procena interakcije laserskog snopa sa materijalom na bazi ugljenika - staklastim ugljenikom, Evaluation of laser beam interaction with carbon based material: Glassy carbon",
pages = "69-63",
number = "1",
volume = "21",
doi = "10.2298/CICEQ140131006J"
}

Janićijević, M., Srećković, M., Kaluđerović, B., Dinulović, M., Karastojković, Z., Jovanić, P.,& Kovačević, Z.. (2015). Procena interakcije laserskog snopa sa materijalom na bazi ugljenika - staklastim ugljenikom. in Chemical Industry & Chemical Engineering Quarterly
Savez hemijskih inženjera, Beograd., 21(1), 63-69.
https://doi.org/10.2298/CICEQ140131006J

Janićijević M, Srećković M, Kaluđerović B, Dinulović M, Karastojković Z, Jovanić P, Kovačević Z. Procena interakcije laserskog snopa sa materijalom na bazi ugljenika - staklastim ugljenikom. in Chemical Industry & Chemical Engineering Quarterly. 2015;21(1):63-69.
doi:10.2298/CICEQ140131006J .

Janićijević, Milovan, Srećković, Milesa, Kaluđerović, Branka, Dinulović, Mirko, Karastojković, Zoran, Jovanić, Predrag, Kovačević, Zorica, "Procena interakcije laserskog snopa sa materijalom na bazi ugljenika - staklastim ugljenikom" in Chemical Industry & Chemical Engineering Quarterly, 21, no. 1 (2015):63-69,
https://doi.org/10.2298/CICEQ140131006J . .

TY  - JOUR
AU  - Latinović, Zoran
AU  - Srećković, Milesa
AU  - Janićijević, Milovan
AU  - Ilić, Jelena
AU  - Radovanović, Jelena
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1919
AB  - Among numerous methods of the modelling of laser interaction with the material equivalent of biological tissue (including macroscopic and microscopic cell interaction), the case of pathogenic prostates is chosen to be studied. The principal difference between the inorganic and tissue equivalent material is the term which includes blood flow. Thermal modelling is chosen for interaction mechanisms, i.e. bio-heat equation. It was noticed that the principal problems are in selecting appropriate numerical methods, available mathematical program packages and finding all exact parameters for performing the needed calculations. As principal parameters, among them density, heat conduction, and specific heat, there are many other parameters which depend on the chosen approach (there could be up to 20 parameters, among them coefficient of time scaling, arterial blood temperature, metabolic heat source, etc). The laser type, including its wavelength which defines the quantity of absorbed energy and dynamic of irradiation, presents the term which could be modulated for the chosen problem. In this study, the program Comsol Multiphysics 3.5 is used in the simulation of prostate exposed to Nd3+:YAG laser in its fundamental mode.
PB  - IOP Publishing Ltd, Bristol
T2  - Physica Scripta
T1  - Numerical modelling of thermal effects on biological tissue during laser-material interaction
SP  - 014041
VL  - T162
DO  - 10.1088/0031-8949/2014/T162/014041
ER  - 

@article{
author = "Latinović, Zoran and Srećković, Milesa and Janićijević, Milovan and Ilić, Jelena and Radovanović, Jelena",
year = "2014",
abstract = "Among numerous methods of the modelling of laser interaction with the material equivalent of biological tissue (including macroscopic and microscopic cell interaction), the case of pathogenic prostates is chosen to be studied. The principal difference between the inorganic and tissue equivalent material is the term which includes blood flow. Thermal modelling is chosen for interaction mechanisms, i.e. bio-heat equation. It was noticed that the principal problems are in selecting appropriate numerical methods, available mathematical program packages and finding all exact parameters for performing the needed calculations. As principal parameters, among them density, heat conduction, and specific heat, there are many other parameters which depend on the chosen approach (there could be up to 20 parameters, among them coefficient of time scaling, arterial blood temperature, metabolic heat source, etc). The laser type, including its wavelength which defines the quantity of absorbed energy and dynamic of irradiation, presents the term which could be modulated for the chosen problem. In this study, the program Comsol Multiphysics 3.5 is used in the simulation of prostate exposed to Nd3+:YAG laser in its fundamental mode.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Physica Scripta",
title = "Numerical modelling of thermal effects on biological tissue during laser-material interaction",
pages = "014041",
volume = "T162",
doi = "10.1088/0031-8949/2014/T162/014041"
}

Latinović, Z., Srećković, M., Janićijević, M., Ilić, J.,& Radovanović, J.. (2014). Numerical modelling of thermal effects on biological tissue during laser-material interaction. in Physica Scripta
IOP Publishing Ltd, Bristol., T162, 014041.
https://doi.org/10.1088/0031-8949/2014/T162/014041

Latinović Z, Srećković M, Janićijević M, Ilić J, Radovanović J. Numerical modelling of thermal effects on biological tissue during laser-material interaction. in Physica Scripta. 2014;T162:014041.
doi:10.1088/0031-8949/2014/T162/014041 .

Latinović, Zoran, Srećković, Milesa, Janićijević, Milovan, Ilić, Jelena, Radovanović, Jelena, "Numerical modelling of thermal effects on biological tissue during laser-material interaction" in Physica Scripta, T162 (2014):014041,
https://doi.org/10.1088/0031-8949/2014/T162/014041 . .

TY  - JOUR
AU  - Ilić, Jelena
AU  - Ristić, Slavica
AU  - Čantrak, Đorđe
AU  - Janković, Novica
AU  - Srećković, Milesa
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1803
AB  - Primena 2D laser Dopler anemometarskih sistema je razmatrana za slučaj zatvorenog toka fluida u običnoj cilindričnoj i u cilindričnoj cevi sa ravnim spoljašnjim zidom. Zakoni geometrijske optike su primenjeni na centralne linije laserskih snopova. Izvedeni su izrazi za dislokacije mernih zapremina, uglove kalibracije i rastojanja centra merne zapremine od centra vidnog polja foto-detektora. Izrazi izvedeni u ovom radu su preimenjeni na određeni vrtložni tok u cevi. To je pokazalo nekoliko prednosti korišćenja obične cilindrične cevi u odnosu na danas omiljenije korišćenje cilindrične cevi sa ravnim spoljašnjim zidom. Ovi rezultati ukazuju na to da bi se sadašnje izbegavanje LDA merenja kod obične cilindrične cevi trebalo preispitati.
AB  - The application of 2D laser Doppler anemometry systems is considered, in the case of fluid flow confined in simple cylindrical and in cylindrical tube with flat external surface of the wall. Geometric optics laws are applied to the central lines of laser beams. Measurement volume dislocations, calibration angles and distances of measurement volume centre from the photo-detector field of view centre are expressed. The expressions derived in this paper were applied to specific turbulent swirl flow in pipe. That revealed several advantages of use of a simple cylindrical tube over nowadays favored use of cylindrical tube with flat external surface. Those results suggest that current avoiding of laser Doppler anemometry measurements with simple cylindrical tubes should be reconsidered.
PB  - Univerzitet u Beogradu - Mašinski fakultet, Beograd
T2  - FME Transactions
T1  - Poređenje LDA merenja kod vazdušnog toka u običnoj cilindričnoj i cilindričnoj cevi sa ravnim spoljašnjim zidom
T1  - The comparison of air flow LDA measurement in simple cylindrical and cylindrical tube with flat external wall
EP  - 341
IS  - 4
SP  - 333
VL  - 41
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1803
ER  - 

@article{
author = "Ilić, Jelena and Ristić, Slavica and Čantrak, Đorđe and Janković, Novica and Srećković, Milesa",
year = "2013",
abstract = "Primena 2D laser Dopler anemometarskih sistema je razmatrana za slučaj zatvorenog toka fluida u običnoj cilindričnoj i u cilindričnoj cevi sa ravnim spoljašnjim zidom. Zakoni geometrijske optike su primenjeni na centralne linije laserskih snopova. Izvedeni su izrazi za dislokacije mernih zapremina, uglove kalibracije i rastojanja centra merne zapremine od centra vidnog polja foto-detektora. Izrazi izvedeni u ovom radu su preimenjeni na određeni vrtložni tok u cevi. To je pokazalo nekoliko prednosti korišćenja obične cilindrične cevi u odnosu na danas omiljenije korišćenje cilindrične cevi sa ravnim spoljašnjim zidom. Ovi rezultati ukazuju na to da bi se sadašnje izbegavanje LDA merenja kod obične cilindrične cevi trebalo preispitati., The application of 2D laser Doppler anemometry systems is considered, in the case of fluid flow confined in simple cylindrical and in cylindrical tube with flat external surface of the wall. Geometric optics laws are applied to the central lines of laser beams. Measurement volume dislocations, calibration angles and distances of measurement volume centre from the photo-detector field of view centre are expressed. The expressions derived in this paper were applied to specific turbulent swirl flow in pipe. That revealed several advantages of use of a simple cylindrical tube over nowadays favored use of cylindrical tube with flat external surface. Those results suggest that current avoiding of laser Doppler anemometry measurements with simple cylindrical tubes should be reconsidered.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd",
journal = "FME Transactions",
title = "Poređenje LDA merenja kod vazdušnog toka u običnoj cilindričnoj i cilindričnoj cevi sa ravnim spoljašnjim zidom, The comparison of air flow LDA measurement in simple cylindrical and cylindrical tube with flat external wall",
pages = "341-333",
number = "4",
volume = "41",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1803"
}

Ilić, J., Ristić, S., Čantrak, Đ., Janković, N.,& Srećković, M.. (2013). Poređenje LDA merenja kod vazdušnog toka u običnoj cilindričnoj i cilindričnoj cevi sa ravnim spoljašnjim zidom. in FME Transactions
Univerzitet u Beogradu - Mašinski fakultet, Beograd., 41(4), 333-341.
https://hdl.handle.net/21.15107/rcub_machinery_1803

Ilić J, Ristić S, Čantrak Đ, Janković N, Srećković M. Poređenje LDA merenja kod vazdušnog toka u običnoj cilindričnoj i cilindričnoj cevi sa ravnim spoljašnjim zidom. in FME Transactions. 2013;41(4):333-341.
https://hdl.handle.net/21.15107/rcub_machinery_1803 .

Ilić, Jelena, Ristić, Slavica, Čantrak, Đorđe, Janković, Novica, Srećković, Milesa, "Poređenje LDA merenja kod vazdušnog toka u običnoj cilindričnoj i cilindričnoj cevi sa ravnim spoljašnjim zidom" in FME Transactions, 41, no. 4 (2013):333-341,
https://hdl.handle.net/21.15107/rcub_machinery_1803 .

TY  - JOUR
AU  - Janicijević, Milovan
AU  - Srećković, Milesa
AU  - Kaluđerović, Branka
AU  - Bojanić, Slobodan
AU  - Druzijanić, Dragan
AU  - Dinulović, Mirko
AU  - Kovacević, Aleksander
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1715
AB  - This paper presents simulation and experimental results for the exposure of some carbon-based materials to alexandrite and Nd3+:YAG (yttrium aluminum garnet) laser radiation. Simulation of the heating effects was carried out using the COMSOL Multiphysics 3.5 package for samples of carbon-based P7295-2 fiber irradiated using an alexandrite laser and carbon-based P4396-2 fiber irradiated using an Nd3+:YAG laser, as well as by applying finite element modeling for P7295-2 samples irradiated using an Nd3+:YAG laser. In the experimental part, P7295-2 samples were exposed to alexandrite laser radiation while samples of carbon-based composite 3D C/C were exposed to Nd3+:YAG laser radiation. Micrographs of the laser induced craters were obtained by light and scanning electron microscopy, and the images analyzed using the ImageJ software. The results obtained enable identification of the laser-material interaction spots, and characterization of the laser induced changes in the materials investigated.
PB  - IOP Publishing Ltd, Bristol
T2  - Laser Physics
T1  - Characterization of laser beam interaction with carbon materials
IS  - 5
VL  - 23
DO  - 10.1088/1054-660X/23/5/056002
ER  - 

@article{
author = "Janicijević, Milovan and Srećković, Milesa and Kaluđerović, Branka and Bojanić, Slobodan and Druzijanić, Dragan and Dinulović, Mirko and Kovacević, Aleksander",
year = "2013",
abstract = "This paper presents simulation and experimental results for the exposure of some carbon-based materials to alexandrite and Nd3+:YAG (yttrium aluminum garnet) laser radiation. Simulation of the heating effects was carried out using the COMSOL Multiphysics 3.5 package for samples of carbon-based P7295-2 fiber irradiated using an alexandrite laser and carbon-based P4396-2 fiber irradiated using an Nd3+:YAG laser, as well as by applying finite element modeling for P7295-2 samples irradiated using an Nd3+:YAG laser. In the experimental part, P7295-2 samples were exposed to alexandrite laser radiation while samples of carbon-based composite 3D C/C were exposed to Nd3+:YAG laser radiation. Micrographs of the laser induced craters were obtained by light and scanning electron microscopy, and the images analyzed using the ImageJ software. The results obtained enable identification of the laser-material interaction spots, and characterization of the laser induced changes in the materials investigated.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Laser Physics",
title = "Characterization of laser beam interaction with carbon materials",
number = "5",
volume = "23",
doi = "10.1088/1054-660X/23/5/056002"
}

Janicijević, M., Srećković, M., Kaluđerović, B., Bojanić, S., Druzijanić, D., Dinulović, M.,& Kovacević, A.. (2013). Characterization of laser beam interaction with carbon materials. in Laser Physics
IOP Publishing Ltd, Bristol., 23(5).
https://doi.org/10.1088/1054-660X/23/5/056002

Janicijević M, Srećković M, Kaluđerović B, Bojanić S, Druzijanić D, Dinulović M, Kovacević A. Characterization of laser beam interaction with carbon materials. in Laser Physics. 2013;23(5).
doi:10.1088/1054-660X/23/5/056002 .

Janicijević, Milovan, Srećković, Milesa, Kaluđerović, Branka, Bojanić, Slobodan, Druzijanić, Dragan, Dinulović, Mirko, Kovacević, Aleksander, "Characterization of laser beam interaction with carbon materials" in Laser Physics, 23, no. 5 (2013),
https://doi.org/10.1088/1054-660X/23/5/056002 . .

TY  - JOUR
AU  - Fidanovski, Zoran
AU  - Srećković, Milesa
AU  - Ostojić, Stanko
AU  - Ilić, Jelena
AU  - Merkle, Milan
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1443
AB  - The measurement of scattered light properties offers many optical, acoustic, dielectric, thermodynamic data about the scattering medium. Brillouin spectroscopy with various modifications and different laser types has been a measurement technique in acoustics for a long time, but it is still important as an autonomous technique. It enables more detailed and exhaustive knowledge of the acoustic and optical properties of matter. A series of Rayleigh-Brillouin spectra are recorded for a set of organic solvents and phytol. The equipment used in spectra recordings enables the measurement of four components of scattered laser intensity I-hh, I-hv, I-vv and I-vh. The ratios of the linewidth, as well as shifts, are determined for Rayleigh-Brillouin spectra. According to them, the hypersound velocity and absorption coefficients can be calculated. There is much software for data processing obtained in laser interaction with matter, with different programming tools. An analysis of spectra is performed, i.e. an examination of which distribution (Gaussian or Lorentzian) better explains the experimentally obtained diagrams.
PB  - IOP Publishing Ltd, Bristol
T2  - Physica Scripta
T1  - The interpretation of the intensity of components of laser scattering by interaction with matter
SP  - 014016
VL  - T149
DO  - 10.1088/0031-8949/2012/T149/014016
ER  - 

@article{
author = "Fidanovski, Zoran and Srećković, Milesa and Ostojić, Stanko and Ilić, Jelena and Merkle, Milan",
year = "2012",
abstract = "The measurement of scattered light properties offers many optical, acoustic, dielectric, thermodynamic data about the scattering medium. Brillouin spectroscopy with various modifications and different laser types has been a measurement technique in acoustics for a long time, but it is still important as an autonomous technique. It enables more detailed and exhaustive knowledge of the acoustic and optical properties of matter. A series of Rayleigh-Brillouin spectra are recorded for a set of organic solvents and phytol. The equipment used in spectra recordings enables the measurement of four components of scattered laser intensity I-hh, I-hv, I-vv and I-vh. The ratios of the linewidth, as well as shifts, are determined for Rayleigh-Brillouin spectra. According to them, the hypersound velocity and absorption coefficients can be calculated. There is much software for data processing obtained in laser interaction with matter, with different programming tools. An analysis of spectra is performed, i.e. an examination of which distribution (Gaussian or Lorentzian) better explains the experimentally obtained diagrams.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Physica Scripta",
title = "The interpretation of the intensity of components of laser scattering by interaction with matter",
pages = "014016",
volume = "T149",
doi = "10.1088/0031-8949/2012/T149/014016"
}

Fidanovski, Z., Srećković, M., Ostojić, S., Ilić, J.,& Merkle, M.. (2012). The interpretation of the intensity of components of laser scattering by interaction with matter. in Physica Scripta
IOP Publishing Ltd, Bristol., T149, 014016.
https://doi.org/10.1088/0031-8949/2012/T149/014016

Fidanovski Z, Srećković M, Ostojić S, Ilić J, Merkle M. The interpretation of the intensity of components of laser scattering by interaction with matter. in Physica Scripta. 2012;T149:014016.
doi:10.1088/0031-8949/2012/T149/014016 .

Fidanovski, Zoran, Srećković, Milesa, Ostojić, Stanko, Ilić, Jelena, Merkle, Milan, "The interpretation of the intensity of components of laser scattering by interaction with matter" in Physica Scripta, T149 (2012):014016,
https://doi.org/10.1088/0031-8949/2012/T149/014016 . .

TY  - CONF
AU  - Latinović, Zoran
AU  - Oros, Ana
AU  - Srećković, Milesa
AU  - Ilić, Jelena
AU  - Jovanić, Predrag
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6739
AB  - Retinopathy o Prematurity (ROP) is a leading cause of blindness in children.  The ROP is a disease that occurs in premature infants and affects the blood vessels of the developing retina.  The unique feature of ROP relates to its occurrence only in premature infants with immature and incompletely vascularized retina.  We reduce the blindness from ROP by appropriate screening and effective diode laser treatment (diode red 810nm).  Ocular fundus photos are performed as a part of ROP screening.  During screening examination, the RerCam3, equipped with 130 degrees lens, is used to obtain the color images of both eyes.  In all cases of active posterior ROP the laser treatment is performed.  In those infants the fundus images are taken in sessions of laser treatment and it is repeated one or two weeks later.  The goal of each imaging session is to obtain clear and focused images of all parts of the ocular fundus.  The images are stored on the RetCam3computer hard drive.
This paper attempts to compare certain methods of quantifying results of several stages of the pathological eye conditions in clinical practice based on RetCam image records.  The first image processing is related to application of color analysis by the program Matcad.  It is scrutinized if the increased or decreased presence of certain color in an image of a full eye or specific parts of the eye indicates the degree/severity of the disease (pathological state).  Another approach is the implementation of the program Image J.  The third quantification belongs to fractional analysis where several approaches are executed related to the application of different filtrations.  Herein it is addressed the analysis of concrete examples and analysis of different utility levels of processing technique.  In particular, some issues of interaction of the three laser types with eye tissue in various operating modes (ex. Q-switched laser and others) are particularly discussed.
PB  - Vinča Institute of Nuclear Sciences
C3  - PHOTONICA 2011 Abstracts of tutorial, keynote and invited lectures and contributed papers of the International School and Conference on Photonics
T1  - Laser applications in retinopathy as invasive therapy and possibility of pre and post diagnostics by appropriate image processing
EP  - 117
SP  - 117
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6739
ER  - 

@conference{
author = "Latinović, Zoran and Oros, Ana and Srećković, Milesa and Ilić, Jelena and Jovanić, Predrag",
year = "2011",
abstract = "Retinopathy o Prematurity (ROP) is a leading cause of blindness in children.  The ROP is a disease that occurs in premature infants and affects the blood vessels of the developing retina.  The unique feature of ROP relates to its occurrence only in premature infants with immature and incompletely vascularized retina.  We reduce the blindness from ROP by appropriate screening and effective diode laser treatment (diode red 810nm).  Ocular fundus photos are performed as a part of ROP screening.  During screening examination, the RerCam3, equipped with 130 degrees lens, is used to obtain the color images of both eyes.  In all cases of active posterior ROP the laser treatment is performed.  In those infants the fundus images are taken in sessions of laser treatment and it is repeated one or two weeks later.  The goal of each imaging session is to obtain clear and focused images of all parts of the ocular fundus.  The images are stored on the RetCam3computer hard drive.
This paper attempts to compare certain methods of quantifying results of several stages of the pathological eye conditions in clinical practice based on RetCam image records.  The first image processing is related to application of color analysis by the program Matcad.  It is scrutinized if the increased or decreased presence of certain color in an image of a full eye or specific parts of the eye indicates the degree/severity of the disease (pathological state).  Another approach is the implementation of the program Image J.  The third quantification belongs to fractional analysis where several approaches are executed related to the application of different filtrations.  Herein it is addressed the analysis of concrete examples and analysis of different utility levels of processing technique.  In particular, some issues of interaction of the three laser types with eye tissue in various operating modes (ex. Q-switched laser and others) are particularly discussed.",
publisher = "Vinča Institute of Nuclear Sciences",
journal = "PHOTONICA 2011 Abstracts of tutorial, keynote and invited lectures and contributed papers of the International School and Conference on Photonics",
title = "Laser applications in retinopathy as invasive therapy and possibility of pre and post diagnostics by appropriate image processing",
pages = "117-117",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6739"
}

Latinović, Z., Oros, A., Srećković, M., Ilić, J.,& Jovanić, P.. (2011). Laser applications in retinopathy as invasive therapy and possibility of pre and post diagnostics by appropriate image processing. in PHOTONICA 2011 Abstracts of tutorial, keynote and invited lectures and contributed papers of the International School and Conference on Photonics
Vinča Institute of Nuclear Sciences., 117-117.
https://hdl.handle.net/21.15107/rcub_machinery_6739

Latinović Z, Oros A, Srećković M, Ilić J, Jovanić P. Laser applications in retinopathy as invasive therapy and possibility of pre and post diagnostics by appropriate image processing. in PHOTONICA 2011 Abstracts of tutorial, keynote and invited lectures and contributed papers of the International School and Conference on Photonics. 2011;:117-117.
https://hdl.handle.net/21.15107/rcub_machinery_6739 .

Latinović, Zoran, Oros, Ana, Srećković, Milesa, Ilić, Jelena, Jovanić, Predrag, "Laser applications in retinopathy as invasive therapy and possibility of pre and post diagnostics by appropriate image processing" in PHOTONICA 2011 Abstracts of tutorial, keynote and invited lectures and contributed papers of the International School and Conference on Photonics (2011):117-117,
https://hdl.handle.net/21.15107/rcub_machinery_6739 .

TY  - JOUR
AU  - Srećković, Milesa
AU  - Ilić, Jelena
AU  - Nikolić, Dragana
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1211
AB  - Some current solutions and designs of devices and systems are analyzed, in this paper, concerning component and system dynamics and stability with aim to improve their design. Conventional solutions of non-optical type, that included fluid dynamics control, Pitot (Prandtl) tubes, etc., rely mainly on approximated hydrodynamics laws. For solid state dynamics, vibration control, laser vibrometers and seismometers have various designs. Many years ago, solutions aided with quantum generators - lasers, have been taken over a lot of tasks, creating that way laser metrology and diagnostics. On the other hand, quantum generator designers used experiences of various mechanical engineering disciplines. In this study, both theoretical and practical issues are considered and some results are presented. General approaches to laws considering critical phenomena and laws of similarity are also considered. .
PB  - Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad
T2  - Machine Design
T1  - Design through fluctuations, critical phenomena, quantum generators and process and component control
EP  - 272
IS  - 4
SP  - 267
VL  - 3
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1211
ER  - 

@article{
author = "Srećković, Milesa and Ilić, Jelena and Nikolić, Dragana",
year = "2011",
abstract = "Some current solutions and designs of devices and systems are analyzed, in this paper, concerning component and system dynamics and stability with aim to improve their design. Conventional solutions of non-optical type, that included fluid dynamics control, Pitot (Prandtl) tubes, etc., rely mainly on approximated hydrodynamics laws. For solid state dynamics, vibration control, laser vibrometers and seismometers have various designs. Many years ago, solutions aided with quantum generators - lasers, have been taken over a lot of tasks, creating that way laser metrology and diagnostics. On the other hand, quantum generator designers used experiences of various mechanical engineering disciplines. In this study, both theoretical and practical issues are considered and some results are presented. General approaches to laws considering critical phenomena and laws of similarity are also considered. .",
publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad",
journal = "Machine Design",
title = "Design through fluctuations, critical phenomena, quantum generators and process and component control",
pages = "272-267",
number = "4",
volume = "3",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1211"
}

Srećković, M., Ilić, J.,& Nikolić, D.. (2011). Design through fluctuations, critical phenomena, quantum generators and process and component control. in Machine Design
Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad., 3(4), 267-272.
https://hdl.handle.net/21.15107/rcub_machinery_1211

Srećković M, Ilić J, Nikolić D. Design through fluctuations, critical phenomena, quantum generators and process and component control. in Machine Design. 2011;3(4):267-272.
https://hdl.handle.net/21.15107/rcub_machinery_1211 .

Srećković, Milesa, Ilić, Jelena, Nikolić, Dragana, "Design through fluctuations, critical phenomena, quantum generators and process and component control" in Machine Design, 3, no. 4 (2011):267-272,
https://hdl.handle.net/21.15107/rcub_machinery_1211 .

TY  - JOUR
AU  - Mitrović, Časlav
AU  - Radojević, Slobodan
AU  - Srećković, Milesa
AU  - Milanović, Zoran
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1279
AB  - Ovaj rad predstavlja studiju zaštite elektronskih izdanja na optičkim diskovima (CD/DVD), na osnovu osnovnih principa logike i kodne zaštite. Dizajn ovog rešenja je prilično jednostavan, ali je uglavnom sličan kompleksu metoda koje se danas koriste u zaštiti velikog broja komercijalnih elektronskih izdanja. Implementacija i upotreba je prilagođena korsnicima (studentima/profesorima) koji se interesuju za elektronska izdanja objavljenja na Kriminalističko-policijskoj akademiji u Beogradu
AB  - This paper presents a study of electronic editions protection on optical discs (CD/DVD) based on basic principles of logic and côde protection. The design of this solution is rather simple, but it is mainly similar to complex methods used nowadays in protection of great number of commercial electronic editions. The implementation and usage are adapted to users (students/professors) who are interested in electronic editions that are published on Criminal-Police Academy in Belgrade.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Od ideje do implementacije u zaštiti elektronskih izdanja
T1  - From idea to implementation in protection of electronic editions (book)
EP  - 479
IS  - 4
SP  - 471
VL  - 9
DO  - 10.5937/JAES9-1194
ER  - 

@article{
author = "Mitrović, Časlav and Radojević, Slobodan and Srećković, Milesa and Milanović, Zoran",
year = "2011",
abstract = "Ovaj rad predstavlja studiju zaštite elektronskih izdanja na optičkim diskovima (CD/DVD), na osnovu osnovnih principa logike i kodne zaštite. Dizajn ovog rešenja je prilično jednostavan, ali je uglavnom sličan kompleksu metoda koje se danas koriste u zaštiti velikog broja komercijalnih elektronskih izdanja. Implementacija i upotreba je prilagođena korsnicima (studentima/profesorima) koji se interesuju za elektronska izdanja objavljenja na Kriminalističko-policijskoj akademiji u Beogradu, This paper presents a study of electronic editions protection on optical discs (CD/DVD) based on basic principles of logic and côde protection. The design of this solution is rather simple, but it is mainly similar to complex methods used nowadays in protection of great number of commercial electronic editions. The implementation and usage are adapted to users (students/professors) who are interested in electronic editions that are published on Criminal-Police Academy in Belgrade.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Od ideje do implementacije u zaštiti elektronskih izdanja, From idea to implementation in protection of electronic editions (book)",
pages = "479-471",
number = "4",
volume = "9",
doi = "10.5937/JAES9-1194"
}

Mitrović, Č., Radojević, S., Srećković, M.,& Milanović, Z.. (2011). Od ideje do implementacije u zaštiti elektronskih izdanja. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 9(4), 471-479.
https://doi.org/10.5937/JAES9-1194

Mitrović Č, Radojević S, Srećković M, Milanović Z. Od ideje do implementacije u zaštiti elektronskih izdanja. in Journal of Applied Engineering Science. 2011;9(4):471-479.
doi:10.5937/JAES9-1194 .

Mitrović, Časlav, Radojević, Slobodan, Srećković, Milesa, Milanović, Zoran, "Od ideje do implementacije u zaštiti elektronskih izdanja" in Journal of Applied Engineering Science, 9, no. 4 (2011):471-479,
https://doi.org/10.5937/JAES9-1194 . .

TY  - CONF
AU  - Srećković, Milesa
AU  - Ilić, Jelena
AU  - Davidović, M.
AU  - Djokić, B.
AU  - Tomić, Z.
AU  - Latinović, Z.
AU  - Druzijanić, Dragan
PY  - 2009
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/897
AB  - The experimental treatment of chosen material with laser beams, starting from continuous wave up to fs pulses, produces the necessity to find the common and sophisticated theoretical approaches to interaction modeling. For chosen materials, some laser treatment and damage analyses are performed. The provoked stresses and parameters of transport processes (penetration depth) are calculated by using the programs for electrical circuit analyses. Some inconsistencies in the treatment of large area laser-material interaction are discussed.
PB  - Polish Academy of Sciences
C3  - Acta Physica Polonica A
T1  - Laser Interaction with Material - Theory, Experiments and Discrepancies
EP  - 621
IS  - 4
SP  - 618
VL  - 116
DO  - 10.12693/APhysPolA.116.618
ER  - 

@conference{
author = "Srećković, Milesa and Ilić, Jelena and Davidović, M. and Djokić, B. and Tomić, Z. and Latinović, Z. and Druzijanić, Dragan",
year = "2009",
abstract = "The experimental treatment of chosen material with laser beams, starting from continuous wave up to fs pulses, produces the necessity to find the common and sophisticated theoretical approaches to interaction modeling. For chosen materials, some laser treatment and damage analyses are performed. The provoked stresses and parameters of transport processes (penetration depth) are calculated by using the programs for electrical circuit analyses. Some inconsistencies in the treatment of large area laser-material interaction are discussed.",
publisher = "Polish Academy of Sciences",
journal = "Acta Physica Polonica A",
title = "Laser Interaction with Material - Theory, Experiments and Discrepancies",
pages = "621-618",
number = "4",
volume = "116",
doi = "10.12693/APhysPolA.116.618"
}

Srećković, M., Ilić, J., Davidović, M., Djokić, B., Tomić, Z., Latinović, Z.,& Druzijanić, D.. (2009). Laser Interaction with Material - Theory, Experiments and Discrepancies. in Acta Physica Polonica A
Polish Academy of Sciences., 116(4), 618-621.
https://doi.org/10.12693/APhysPolA.116.618

Srećković M, Ilić J, Davidović M, Djokić B, Tomić Z, Latinović Z, Druzijanić D. Laser Interaction with Material - Theory, Experiments and Discrepancies. in Acta Physica Polonica A. 2009;116(4):618-621.
doi:10.12693/APhysPolA.116.618 .

Srećković, Milesa, Ilić, Jelena, Davidović, M., Djokić, B., Tomić, Z., Latinović, Z., Druzijanić, Dragan, "Laser Interaction with Material - Theory, Experiments and Discrepancies" in Acta Physica Polonica A, 116, no. 4 (2009):618-621,
https://doi.org/10.12693/APhysPolA.116.618 . .

TY  - JOUR
AU  - Srećković, Milesa
AU  - Milosavljević, Anđelka
AU  - Kovačević, Aleksandar
AU  - Gospavić, Radovan
AU  - Trtica, Milan
AU  - Ristić, Zoran
AU  - Cvetković, Nevenka
AU  - Čantrak, Đorđe
PY  - 2008
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/800
AB  - Savremene legure na bazi nikla i titanijuma, sa većim brojem novih elemenata, imaju široku primenu. Tako dobijene nove legure titanijuma su od velikog praktičnog značaja u vazduhoplovstvu, a novodobijene legure nikla u energetici i nuklearnoj tehnici. U okviru ovog rada su prikazani rezultati tretiranja legura titanijuma i nikla snopovima lasera u vazduhu, na atmosferskom pritisku, kao i pojedinih uzoraka u vakumskim uslovima. Dobijene laserske modifikacije mikrostruktura uzoraka su analizirane različitim metodama ispitivanja, koje uključuju optičku i elektronsku mikroskopiju (SEM). Savremenim numeričkim metodama je, za izabrane režime rada lasera, simulirano grejanje do tačke topljenja odgovarajućeg materijala.
AB  - Commonly implemented nickel and titanium alloys are nowadays alloyed with many new elements. Obtained in this way, new Ti-alloys are of great practical significance in aircraft industry, while Ni-alloys are important in energetic and nuclear technique. Selected alloys of titanium and nickel have been treated in vacuum by various thermo-mechanical regimes. Most of the samples have been exposed to laser beams in the air, at the atmospheric pressure, while some of the samples have been treated in vacuum conditions. Laser-induced modifications of the samples microstructures have been analyzed by various methods of investigation, which include optical- and electron microscopy (SEM). The heating up of the selected Ni- and Ti-alloys to the melting point, in selected regimes of laser operation, has been simulated by contemporary numerical methods.
PB  - Univerzitet u Beogradu - Mašinski fakultet, Beograd
T2  - FME Transactions
T1  - Interakcija različitih tipova lasera sa legurama baziranim na niklu i titanijumu
T1  - Interaction of lasers of various types with alloys based on Ni and Ti
EP  - 173
IS  - 4
SP  - 167
VL  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_800
ER  - 

@article{
author = "Srećković, Milesa and Milosavljević, Anđelka and Kovačević, Aleksandar and Gospavić, Radovan and Trtica, Milan and Ristić, Zoran and Cvetković, Nevenka and Čantrak, Đorđe",
year = "2008",
abstract = "Savremene legure na bazi nikla i titanijuma, sa većim brojem novih elemenata, imaju široku primenu. Tako dobijene nove legure titanijuma su od velikog praktičnog značaja u vazduhoplovstvu, a novodobijene legure nikla u energetici i nuklearnoj tehnici. U okviru ovog rada su prikazani rezultati tretiranja legura titanijuma i nikla snopovima lasera u vazduhu, na atmosferskom pritisku, kao i pojedinih uzoraka u vakumskim uslovima. Dobijene laserske modifikacije mikrostruktura uzoraka su analizirane različitim metodama ispitivanja, koje uključuju optičku i elektronsku mikroskopiju (SEM). Savremenim numeričkim metodama je, za izabrane režime rada lasera, simulirano grejanje do tačke topljenja odgovarajućeg materijala., Commonly implemented nickel and titanium alloys are nowadays alloyed with many new elements. Obtained in this way, new Ti-alloys are of great practical significance in aircraft industry, while Ni-alloys are important in energetic and nuclear technique. Selected alloys of titanium and nickel have been treated in vacuum by various thermo-mechanical regimes. Most of the samples have been exposed to laser beams in the air, at the atmospheric pressure, while some of the samples have been treated in vacuum conditions. Laser-induced modifications of the samples microstructures have been analyzed by various methods of investigation, which include optical- and electron microscopy (SEM). The heating up of the selected Ni- and Ti-alloys to the melting point, in selected regimes of laser operation, has been simulated by contemporary numerical methods.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd",
journal = "FME Transactions",
title = "Interakcija različitih tipova lasera sa legurama baziranim na niklu i titanijumu, Interaction of lasers of various types with alloys based on Ni and Ti",
pages = "173-167",
number = "4",
volume = "36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_800"
}

Srećković, M., Milosavljević, A., Kovačević, A., Gospavić, R., Trtica, M., Ristić, Z., Cvetković, N.,& Čantrak, Đ.. (2008). Interakcija različitih tipova lasera sa legurama baziranim na niklu i titanijumu. in FME Transactions
Univerzitet u Beogradu - Mašinski fakultet, Beograd., 36(4), 167-173.
https://hdl.handle.net/21.15107/rcub_machinery_800

Srećković M, Milosavljević A, Kovačević A, Gospavić R, Trtica M, Ristić Z, Cvetković N, Čantrak Đ. Interakcija različitih tipova lasera sa legurama baziranim na niklu i titanijumu. in FME Transactions. 2008;36(4):167-173.
https://hdl.handle.net/21.15107/rcub_machinery_800 .

Srećković, Milesa, Milosavljević, Anđelka, Kovačević, Aleksandar, Gospavić, Radovan, Trtica, Milan, Ristić, Zoran, Cvetković, Nevenka, Čantrak, Đorđe, "Interakcija različitih tipova lasera sa legurama baziranim na niklu i titanijumu" in FME Transactions, 36, no. 4 (2008):167-173,
https://hdl.handle.net/21.15107/rcub_machinery_800 .

TY  - CONF
AU  - Ilić, Jelena
AU  - Srećković, Milesa
AU  - Zarubica, Veljko
PY  - 2008
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6738
AB  - Materials suitable for light pulse propagation control are investigated in this paper.  Many of recent papers reported the results of optical properties measurement in broad wavelength ranges for newly developed materials as well as thin films of more or less known materials [1] [2].  After the refractive indices are measured for set of wavelengths they are fitted usually by four-parameter Sellmeier equation, on the basis of which the phase matching curves for second-harmonic generation are calculated.  In this paper further analyses of Sellmeier equation for various materials of interest in nonlinear optics are performed.
First, group velocity dispersions are calculated and wavelength regions of specific types of pulse propagation are distincted: regions of constant pulse width around the zero group velocity dispersion, regions of pulse compression possibilities with negative group velocity dispersion and regions of pulse broadening which though usually unwanted can be used for introducing a good quality chirp suitable fore effective pulse compression [3].  Temperature dependences of refractive indices also reported are taken into account [4] [5].
On the other hand, generalized Sellmeier equation which consists of several oscillator terms involve in its parameters more direct information about material such as electronic transitions or resonance wavelengths and average oscillator strengths i.e. oscillators volume concentrations and transition probabilities [6].  Therefore, four parameter Sellmeier equations are transformed by fitting into one-term (or one-oscillator) in order to get more useful information about a material.  The necessity of second term introduction indicated by bad fitting are detected for some materials.  The conditions for the second term parameters required for negative group velocity dispersion (as it is appropriate in pulse compression) are determined.  Finally, correlation of the parameters of Sellmeier equation and some non-optical material properties, including mechanical and thermal, are considered.
The materials chosen for the analyses are rare earth oxides, borates, chalcopyrite crystals some laser host materials and some crystals such as langasite, langanite and langataite [7]. 


References
[1] N. Umemura, K. Miyata and K. Kato, 30, 532 (2007).
[2] C. Martinet, A. Pillonnet, J. Lancok and C. Garapon, J. Luminescence 126, 807 (2007).
[3] G. Hays, E. Gaul, M. Martinez and Todd Ditmire, Appl. Opt. 46, 4813 (2007).
[4] U. Schlarb, K. Betzler, Phys.Rev. B 50, 751 (1994).
[5] L. F. Jiang, W. Z. Shen, H. Ogawa, Q. X. Guo, J. Appl. Phys. 94, 5704 (2004).
[6] X. Wan, H. Chan, C. Choy, X. Zhao, H. Luo, J. Appl. Opt. 96, 1387 (2004).
[7] J. Stade, L. Bohaty, M. Hengst, R. B. Heimann, Cryst. Res. Technol. 37, 1113 (2002).
PB  - Vinča Institute of Nuclear Sciences
C3  - CEWQO 2008 Book of Abstracts
T1  - Sellmeier parameters analysis in optical pulse shaping
EP  - 36
SP  - 35
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6738
ER  - 

@conference{
author = "Ilić, Jelena and Srećković, Milesa and Zarubica, Veljko",
year = "2008",
abstract = "Materials suitable for light pulse propagation control are investigated in this paper.  Many of recent papers reported the results of optical properties measurement in broad wavelength ranges for newly developed materials as well as thin films of more or less known materials [1] [2].  After the refractive indices are measured for set of wavelengths they are fitted usually by four-parameter Sellmeier equation, on the basis of which the phase matching curves for second-harmonic generation are calculated.  In this paper further analyses of Sellmeier equation for various materials of interest in nonlinear optics are performed.
First, group velocity dispersions are calculated and wavelength regions of specific types of pulse propagation are distincted: regions of constant pulse width around the zero group velocity dispersion, regions of pulse compression possibilities with negative group velocity dispersion and regions of pulse broadening which though usually unwanted can be used for introducing a good quality chirp suitable fore effective pulse compression [3].  Temperature dependences of refractive indices also reported are taken into account [4] [5].
On the other hand, generalized Sellmeier equation which consists of several oscillator terms involve in its parameters more direct information about material such as electronic transitions or resonance wavelengths and average oscillator strengths i.e. oscillators volume concentrations and transition probabilities [6].  Therefore, four parameter Sellmeier equations are transformed by fitting into one-term (or one-oscillator) in order to get more useful information about a material.  The necessity of second term introduction indicated by bad fitting are detected for some materials.  The conditions for the second term parameters required for negative group velocity dispersion (as it is appropriate in pulse compression) are determined.  Finally, correlation of the parameters of Sellmeier equation and some non-optical material properties, including mechanical and thermal, are considered.
The materials chosen for the analyses are rare earth oxides, borates, chalcopyrite crystals some laser host materials and some crystals such as langasite, langanite and langataite [7]. 


References
[1] N. Umemura, K. Miyata and K. Kato, 30, 532 (2007).
[2] C. Martinet, A. Pillonnet, J. Lancok and C. Garapon, J. Luminescence 126, 807 (2007).
[3] G. Hays, E. Gaul, M. Martinez and Todd Ditmire, Appl. Opt. 46, 4813 (2007).
[4] U. Schlarb, K. Betzler, Phys.Rev. B 50, 751 (1994).
[5] L. F. Jiang, W. Z. Shen, H. Ogawa, Q. X. Guo, J. Appl. Phys. 94, 5704 (2004).
[6] X. Wan, H. Chan, C. Choy, X. Zhao, H. Luo, J. Appl. Opt. 96, 1387 (2004).
[7] J. Stade, L. Bohaty, M. Hengst, R. B. Heimann, Cryst. Res. Technol. 37, 1113 (2002).",
publisher = "Vinča Institute of Nuclear Sciences",
journal = "CEWQO 2008 Book of Abstracts",
title = "Sellmeier parameters analysis in optical pulse shaping",
pages = "36-35",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6738"
}

Ilić, J., Srećković, M.,& Zarubica, V.. (2008). Sellmeier parameters analysis in optical pulse shaping. in CEWQO 2008 Book of Abstracts
Vinča Institute of Nuclear Sciences., 35-36.
https://hdl.handle.net/21.15107/rcub_machinery_6738

Ilić J, Srećković M, Zarubica V. Sellmeier parameters analysis in optical pulse shaping. in CEWQO 2008 Book of Abstracts. 2008;:35-36.
https://hdl.handle.net/21.15107/rcub_machinery_6738 .

Ilić, Jelena, Srećković, Milesa, Zarubica, Veljko, "Sellmeier parameters analysis in optical pulse shaping" in CEWQO 2008 Book of Abstracts (2008):35-36,
https://hdl.handle.net/21.15107/rcub_machinery_6738 .

TY  - CONF
AU  - Tomić, Željka
AU  - Srećković, Milesa
AU  - Zarubica, Veljko
AU  - Ćuk, Senka
AU  - Đokić, Biljana
AU  - Ilić, Jelena
AU  - Ostojić, Stanko
AU  - Dukić, Milan
AU  - Sredojević, M.
PY  - 2008
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6707
AB  - Razvoj kvantnih generatora i pojačavača, (u području od kontinualne do atto oblasti) doneo je nove zahteve postojećim i razvoj novih teorija.  Eksperiment i teorija su stalno zamenjivali mesta. Rezultati određenog procesa, se ne mogu pratiti on line i uključuju se i rezonantni efekti, da bi se indirektno izmerila pojedina veličina optičke, termodinamičke, akustičke ili druge prirode. Interakcija sa materijalom, traži poznavanje i novih konstanti nelinearne prirode, koje uključuju zavisnost od intenziteta zračenja.  Šeme merenja nelinearnih delova indeksa prelamanja, koeficijenta refleksije i drugih optičkih konstanti zahtevaju složene aparature. Zato se planiranje novih eksperimenata i podešavanje angularnih položaja snopova, koji stupaju u interakciju, moraju simulirati i unapred predviđati mogući položaji. Iako su cene optike, koja služi kao eksperimentalna baza sada prihvatljivije, traženje materijala pogodnih za određene namene mora da uključi specifične tehnološke procese. U ovom radu se koriste teorije, koje polazeći od linearnih konstanti materijala, ocenjuju nelinearne i disperzivne doprinose i koriste vezu optičkih veličina sa veličinama drugih oblasti.
AB  - The development of quantum generators and amplifiers (from continuous to atto range) has brought new demands for the existing theories as well as the development of new ones. Experiment and theory have been switching places continuously. The results of certain process can not be monitored on line and resonant effects are included in order to indirectly measure optical, thermodynamic, acoustic or any other value (quantity). Interaction with material is demanding the knowledge of new nonlinear constants which include dependence on beam intensity. Schemes for measurement of nonlinear parts of refraction index, reflection coefficient and other optical constants demand complicated devices. Therefore, the planning of new experiments and adjustment of beams which interact must be simulated and possible positions must be predicted in advance. Although the prices of optics which serves as experimental base are now more acceptable, searching for materials that are suitable for certain purposes must include specific technological processes. The theories starting from linear material constants, which estimate nonlinear and dispersive contributions as well as  relationship between optical quantities and quantities from other fields are analyzed in this paper.
C3  - ZBORNIK RADOVA INFOTEH JAHORINA 2008
T1  - Оцена линеарних и нелинеарних константи материјала
T1  - Evaluation of nonlinear and linear constants of materials
EP  - 672
SP  - 668
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6707
ER  - 

@conference{
author = "Tomić, Željka and Srećković, Milesa and Zarubica, Veljko and Ćuk, Senka and Đokić, Biljana and Ilić, Jelena and Ostojić, Stanko and Dukić, Milan and Sredojević, M.",
year = "2008",
abstract = "Razvoj kvantnih generatora i pojačavača, (u području od kontinualne do atto oblasti) doneo je nove zahteve postojećim i razvoj novih teorija.  Eksperiment i teorija su stalno zamenjivali mesta. Rezultati određenog procesa, se ne mogu pratiti on line i uključuju se i rezonantni efekti, da bi se indirektno izmerila pojedina veličina optičke, termodinamičke, akustičke ili druge prirode. Interakcija sa materijalom, traži poznavanje i novih konstanti nelinearne prirode, koje uključuju zavisnost od intenziteta zračenja.  Šeme merenja nelinearnih delova indeksa prelamanja, koeficijenta refleksije i drugih optičkih konstanti zahtevaju složene aparature. Zato se planiranje novih eksperimenata i podešavanje angularnih položaja snopova, koji stupaju u interakciju, moraju simulirati i unapred predviđati mogući položaji. Iako su cene optike, koja služi kao eksperimentalna baza sada prihvatljivije, traženje materijala pogodnih za određene namene mora da uključi specifične tehnološke procese. U ovom radu se koriste teorije, koje polazeći od linearnih konstanti materijala, ocenjuju nelinearne i disperzivne doprinose i koriste vezu optičkih veličina sa veličinama drugih oblasti., The development of quantum generators and amplifiers (from continuous to atto range) has brought new demands for the existing theories as well as the development of new ones. Experiment and theory have been switching places continuously. The results of certain process can not be monitored on line and resonant effects are included in order to indirectly measure optical, thermodynamic, acoustic or any other value (quantity). Interaction with material is demanding the knowledge of new nonlinear constants which include dependence on beam intensity. Schemes for measurement of nonlinear parts of refraction index, reflection coefficient and other optical constants demand complicated devices. Therefore, the planning of new experiments and adjustment of beams which interact must be simulated and possible positions must be predicted in advance. Although the prices of optics which serves as experimental base are now more acceptable, searching for materials that are suitable for certain purposes must include specific technological processes. The theories starting from linear material constants, which estimate nonlinear and dispersive contributions as well as  relationship between optical quantities and quantities from other fields are analyzed in this paper.",
journal = "ZBORNIK RADOVA INFOTEH JAHORINA 2008",
title = "Оцена линеарних и нелинеарних константи материјала, Evaluation of nonlinear and linear constants of materials",
pages = "672-668",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6707"
}

Tomić, Ž., Srećković, M., Zarubica, V., Ćuk, S., Đokić, B., Ilić, J., Ostojić, S., Dukić, M.,& Sredojević, M.. (2008). Оцена линеарних и нелинеарних константи материјала. in ZBORNIK RADOVA INFOTEH JAHORINA 2008, 668-672.
https://hdl.handle.net/21.15107/rcub_machinery_6707

Tomić Ž, Srećković M, Zarubica V, Ćuk S, Đokić B, Ilić J, Ostojić S, Dukić M, Sredojević M. Оцена линеарних и нелинеарних константи материјала. in ZBORNIK RADOVA INFOTEH JAHORINA 2008. 2008;:668-672.
https://hdl.handle.net/21.15107/rcub_machinery_6707 .

Tomić, Željka, Srećković, Milesa, Zarubica, Veljko, Ćuk, Senka, Đokić, Biljana, Ilić, Jelena, Ostojić, Stanko, Dukić, Milan, Sredojević, M., "Оцена линеарних и нелинеарних константи материјала" in ZBORNIK RADOVA INFOTEH JAHORINA 2008 (2008):668-672,
https://hdl.handle.net/21.15107/rcub_machinery_6707 .

TY  - JOUR
AU  - Ilić, Jelena
AU  - Čantrak, Đorđe
AU  - Srećković, Milesa
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/688
AB  - Simulations of laser sheet scattering by microparticles, based on the generalized Lorenz-Mie theory for the case of numerous random spatial distributions of scattering particles, were done, using the novel computational time saving strategy. This type of scattering by particles immersed in a fluid flow and its recording on cameras, presents the essence of particle image velocimetry systems. The continuous and large change of the intensity of a scattered light failing on the camera causes the sequences of images of varying quality, which makes many of them useless. This paper shows how the problem could be alleviated by determining the angles of low relative standard deviation of scattered light intensity and using them for recording, as well as by avoiding the angles of high relative standard deviation of scattered light intensity.
PB  - Polish Academy of Sciences
T2  - Acta Physica Polonica A
T1  - Laser sheet scattering and the cameras' positions in particle image velocimetry
EP  - 1118
IS  - 5
SP  - 1113
VL  - 112
DO  - 10.12693/APhysPolA.112.1113
ER  - 

@article{
author = "Ilić, Jelena and Čantrak, Đorđe and Srećković, Milesa",
year = "2007",
abstract = "Simulations of laser sheet scattering by microparticles, based on the generalized Lorenz-Mie theory for the case of numerous random spatial distributions of scattering particles, were done, using the novel computational time saving strategy. This type of scattering by particles immersed in a fluid flow and its recording on cameras, presents the essence of particle image velocimetry systems. The continuous and large change of the intensity of a scattered light failing on the camera causes the sequences of images of varying quality, which makes many of them useless. This paper shows how the problem could be alleviated by determining the angles of low relative standard deviation of scattered light intensity and using them for recording, as well as by avoiding the angles of high relative standard deviation of scattered light intensity.",
publisher = "Polish Academy of Sciences",
journal = "Acta Physica Polonica A",
title = "Laser sheet scattering and the cameras' positions in particle image velocimetry",
pages = "1118-1113",
number = "5",
volume = "112",
doi = "10.12693/APhysPolA.112.1113"
}

Ilić, J., Čantrak, Đ.,& Srećković, M.. (2007). Laser sheet scattering and the cameras' positions in particle image velocimetry. in Acta Physica Polonica A
Polish Academy of Sciences., 112(5), 1113-1118.
https://doi.org/10.12693/APhysPolA.112.1113

Ilić J, Čantrak Đ, Srećković M. Laser sheet scattering and the cameras' positions in particle image velocimetry. in Acta Physica Polonica A. 2007;112(5):1113-1118.
doi:10.12693/APhysPolA.112.1113 .

Ilić, Jelena, Čantrak, Đorđe, Srećković, Milesa, "Laser sheet scattering and the cameras' positions in particle image velocimetry" in Acta Physica Polonica A, 112, no. 5 (2007):1113-1118,
https://doi.org/10.12693/APhysPolA.112.1113 . .

TY  - CONF
AU  - Srećković, Milesa
AU  - Ilić, Jelena
AU  - Kovačević, A.
AU  - Pantelić, S.
AU  - Latinović, Z.
AU  - Borna, N.
AU  - Cosović, Vlada
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/678
AB  - Models of interactions of laser beams with materials of interest for optical components are presented in this paper. Special attention is paid to damages which appear within both active materials and optical components along the path of a propagating beam with theoretical treatment via various models.
PB  - Polish Academy of Sciences
C3  - Acta Physica Polonica A
T1  - Models of interactions of laser beams with materials of interest for optical components and provoked damages
EP  - 940
IS  - 5
SP  - 935
VL  - 112
DO  - 10.12693/APhysPolA.112.935
ER  - 

@conference{
author = "Srećković, Milesa and Ilić, Jelena and Kovačević, A. and Pantelić, S. and Latinović, Z. and Borna, N. and Cosović, Vlada",
year = "2007",
abstract = "Models of interactions of laser beams with materials of interest for optical components are presented in this paper. Special attention is paid to damages which appear within both active materials and optical components along the path of a propagating beam with theoretical treatment via various models.",
publisher = "Polish Academy of Sciences",
journal = "Acta Physica Polonica A",
title = "Models of interactions of laser beams with materials of interest for optical components and provoked damages",
pages = "940-935",
number = "5",
volume = "112",
doi = "10.12693/APhysPolA.112.935"
}

Srećković, M., Ilić, J., Kovačević, A., Pantelić, S., Latinović, Z., Borna, N.,& Cosović, V.. (2007). Models of interactions of laser beams with materials of interest for optical components and provoked damages. in Acta Physica Polonica A
Polish Academy of Sciences., 112(5), 935-940.
https://doi.org/10.12693/APhysPolA.112.935

Srećković M, Ilić J, Kovačević A, Pantelić S, Latinović Z, Borna N, Cosović V. Models of interactions of laser beams with materials of interest for optical components and provoked damages. in Acta Physica Polonica A. 2007;112(5):935-940.
doi:10.12693/APhysPolA.112.935 .

Srećković, Milesa, Ilić, Jelena, Kovačević, A., Pantelić, S., Latinović, Z., Borna, N., Cosović, Vlada, "Models of interactions of laser beams with materials of interest for optical components and provoked damages" in Acta Physica Polonica A, 112, no. 5 (2007):935-940,
https://doi.org/10.12693/APhysPolA.112.935 . .

TY  - JOUR
AU  - Srećković, Milesa
AU  - Tomić, Zeljka
AU  - Stank, Ostoji M.
AU  - Ilić, Jelena
AU  - Bundaleski, Nenad
AU  - Sekulić, Rade S.
AU  - Vlada, Mlinar
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/669
AB  - Lasers can be used for many applications including determination of size, in addition to the theory of diffraction and material dispersion phenomena. In this paper we calculated the corrections in angular intensity for the Gaussian and uniform particle distributions, the scattering intensity on cylindrical objects. We also evaluated the necessary mathematical summations. In addition, we analyse and Simulate the special positions of detectors using laser Doppler anemometric (LDA) methods, which can be used to determine the particle diameter. The dispersion measurements for actual fibres are given at the end. The geometric and material parameters of these fibres were taken before the evaluation of the angular scattering intensity.
T2  - Lasers in Engineering
T1  - The application of laser beam diffraction and scattering methods in the measurement of shape and determination of material parameters
EP  - 196
IS  - 3-4
SP  - 179
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_vinar_3276
ER  - 

@article{
author = "Srećković, Milesa and Tomić, Zeljka and Stank, Ostoji M. and Ilić, Jelena and Bundaleski, Nenad and Sekulić, Rade S. and Vlada, Mlinar",
year = "2007",
abstract = "Lasers can be used for many applications including determination of size, in addition to the theory of diffraction and material dispersion phenomena. In this paper we calculated the corrections in angular intensity for the Gaussian and uniform particle distributions, the scattering intensity on cylindrical objects. We also evaluated the necessary mathematical summations. In addition, we analyse and Simulate the special positions of detectors using laser Doppler anemometric (LDA) methods, which can be used to determine the particle diameter. The dispersion measurements for actual fibres are given at the end. The geometric and material parameters of these fibres were taken before the evaluation of the angular scattering intensity.",
journal = "Lasers in Engineering",
title = "The application of laser beam diffraction and scattering methods in the measurement of shape and determination of material parameters",
pages = "196-179",
number = "3-4",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_vinar_3276"
}

Srećković, M., Tomić, Z., Stank, O. M., Ilić, J., Bundaleski, N., Sekulić, R. S.,& Vlada, M.. (2007). The application of laser beam diffraction and scattering methods in the measurement of shape and determination of material parameters. in Lasers in Engineering, 17(3-4), 179-196.
https://hdl.handle.net/21.15107/rcub_vinar_3276

Srećković M, Tomić Z, Stank OM, Ilić J, Bundaleski N, Sekulić RS, Vlada M. The application of laser beam diffraction and scattering methods in the measurement of shape and determination of material parameters. in Lasers in Engineering. 2007;17(3-4):179-196.
https://hdl.handle.net/21.15107/rcub_vinar_3276 .

Srećković, Milesa, Tomić, Zeljka, Stank, Ostoji M., Ilić, Jelena, Bundaleski, Nenad, Sekulić, Rade S., Vlada, Mlinar, "The application of laser beam diffraction and scattering methods in the measurement of shape and determination of material parameters" in Lasers in Engineering, 17, no. 3-4 (2007):179-196,
https://hdl.handle.net/21.15107/rcub_vinar_3276 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Ostojić, S.
AU  - Ilić, Jelena
AU  - Arsoski, V.
AU  - Pantelić, S.
AU  - Ćuk, S.
AU  - Čantrak, Đorđe
AU  - Đerić, N.
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6824
PB  - Београд : Технолошко-металуршки факултет Универзитета
C3  - Конгрес метролога : зборник радова, Златибор, 26-28. септембра 2007
T1  - Савремени уређаји LDA и аналитичке и нумеричке оцене мерних резултата
EP  - 334
SP  - 327
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6824
ER  - 

@conference{
author = "Srećković, Milesa and Ostojić, S. and Ilić, Jelena and Arsoski, V. and Pantelić, S. and Ćuk, S. and Čantrak, Đorđe and Đerić, N.",
year = "2007",
publisher = "Београд : Технолошко-металуршки факултет Универзитета",
journal = "Конгрес метролога : зборник радова, Златибор, 26-28. септембра 2007",
title = "Савремени уређаји LDA и аналитичке и нумеричке оцене мерних резултата",
pages = "334-327",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6824"
}

Srećković, M., Ostojić, S., Ilić, J., Arsoski, V., Pantelić, S., Ćuk, S., Čantrak, Đ.,& Đerić, N.. (2007). Савремени уређаји LDA и аналитичке и нумеричке оцене мерних резултата. in Конгрес метролога : зборник радова, Златибор, 26-28. септембра 2007
Београд : Технолошко-металуршки факултет Универзитета., 327-334.
https://hdl.handle.net/21.15107/rcub_machinery_6824

Srećković M, Ostojić S, Ilić J, Arsoski V, Pantelić S, Ćuk S, Čantrak Đ, Đerić N. Савремени уређаји LDA и аналитичке и нумеричке оцене мерних резултата. in Конгрес метролога : зборник радова, Златибор, 26-28. септембра 2007. 2007;:327-334.
https://hdl.handle.net/21.15107/rcub_machinery_6824 .

Srećković, Milesa, Ostojić, S., Ilić, Jelena, Arsoski, V., Pantelić, S., Ćuk, S., Čantrak, Đorđe, Đerić, N., "Савремени уређаји LDA и аналитичке и нумеричке оцене мерних резултата" in Конгрес метролога : зборник радова, Златибор, 26-28. септембра 2007 (2007):327-334,
https://hdl.handle.net/21.15107/rcub_machinery_6824 .

TY  - BOOK
AU  - Srećković, Milesa
AU  - Ostojić, Stanko
AU  - Ristić, Slavica
AU  - Ilić, Jelena
AU  - Arsoski, Vladimir
PY  - 2007
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6866
PB  - Čačak : Tehnički fakultet
T1  - Zbirka zadataka iz kvantne elektronike, laserske tehnike i srodnih oblasti i primena
EP  - 336
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6866
ER  - 

@book{
author = "Srećković, Milesa and Ostojić, Stanko and Ristić, Slavica and Ilić, Jelena and Arsoski, Vladimir",
year = "2007",
publisher = "Čačak : Tehnički fakultet",
title = "Zbirka zadataka iz kvantne elektronike, laserske tehnike i srodnih oblasti i primena",
pages = "336-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6866"
}

Srećković, M., Ostojić, S., Ristić, S., Ilić, J.,& Arsoski, V.. (2007). Zbirka zadataka iz kvantne elektronike, laserske tehnike i srodnih oblasti i primena. 
Čačak : Tehnički fakultet., 1-336.
https://hdl.handle.net/21.15107/rcub_machinery_6866

Srećković M, Ostojić S, Ristić S, Ilić J, Arsoski V. Zbirka zadataka iz kvantne elektronike, laserske tehnike i srodnih oblasti i primena. 2007;:1-336.
https://hdl.handle.net/21.15107/rcub_machinery_6866 .

Srećković, Milesa, Ostojić, Stanko, Ristić, Slavica, Ilić, Jelena, Arsoski, Vladimir, "Zbirka zadataka iz kvantne elektronike, laserske tehnike i srodnih oblasti i primena" (2007):1-336,
https://hdl.handle.net/21.15107/rcub_machinery_6866 .

TY  - JOUR
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Ostojić, Stanko
AU  - Ilić, Jelena
AU  - Bundaleski, Nenad
AU  - Sekulić, Rade
AU  - Mlinar, Vlada
PY  - 2006
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6868
AB  - Lasers can be used for many applications including determination of size,
in addition to the theory of diffraction and material dispersion phenomena.
In this paper we calculated the corrections in angular intensity for
the Gaussian and uniform particle distributions, the scattering intensity
on cylindrical objects. We also evaluated the necessary mathematical
summations. In addition, we analyse and simulated the special positions
of detectors using laser Doppler anemometric (LDA) methods, which can
be used to determine the particle diameter. The dispersion measurements
for actual fibres are given at the end. The geometric and material
parameters of these fibres were taken before the evaluation of the
angular scattering intensity.
PB  - Old City Publishing, Inc.
T2  - Lasers in Engineering
T1  - The Application of Laser Beam Diffraction and Scattering Methods in the Measurement of Shape and Determination of Material Parameters
VL  - X
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6868
ER  - 

@article{
author = "Srećković, Milesa and Tomić, Željka and Ostojić, Stanko and Ilić, Jelena and Bundaleski, Nenad and Sekulić, Rade and Mlinar, Vlada",
year = "2006",
abstract = "Lasers can be used for many applications including determination of size,
in addition to the theory of diffraction and material dispersion phenomena.
In this paper we calculated the corrections in angular intensity for
the Gaussian and uniform particle distributions, the scattering intensity
on cylindrical objects. We also evaluated the necessary mathematical
summations. In addition, we analyse and simulated the special positions
of detectors using laser Doppler anemometric (LDA) methods, which can
be used to determine the particle diameter. The dispersion measurements
for actual fibres are given at the end. The geometric and material
parameters of these fibres were taken before the evaluation of the
angular scattering intensity.",
publisher = "Old City Publishing, Inc.",
journal = "Lasers in Engineering",
title = "The Application of Laser Beam Diffraction and Scattering Methods in the Measurement of Shape and Determination of Material Parameters",
volume = "X",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6868"
}

Srećković, M., Tomić, Ž., Ostojić, S., Ilić, J., Bundaleski, N., Sekulić, R.,& Mlinar, V.. (2006). The Application of Laser Beam Diffraction and Scattering Methods in the Measurement of Shape and Determination of Material Parameters. in Lasers in Engineering
Old City Publishing, Inc.., X.
https://hdl.handle.net/21.15107/rcub_machinery_6868

Srećković M, Tomić Ž, Ostojić S, Ilić J, Bundaleski N, Sekulić R, Mlinar V. The Application of Laser Beam Diffraction and Scattering Methods in the Measurement of Shape and Determination of Material Parameters. in Lasers in Engineering. 2006;X.
https://hdl.handle.net/21.15107/rcub_machinery_6868 .

Srećković, Milesa, Tomić, Željka, Ostojić, Stanko, Ilić, Jelena, Bundaleski, Nenad, Sekulić, Rade, Mlinar, Vlada, "The Application of Laser Beam Diffraction and Scattering Methods in the Measurement of Shape and Determination of Material Parameters" in Lasers in Engineering, X (2006),
https://hdl.handle.net/21.15107/rcub_machinery_6868 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Ilić, Jelena
AU  - Tomić, Željka
AU  - Ristić, Slavica
AU  - Aranđelović, Slobodan
AU  - Kovačević, Aleksander
AU  - Ostojić, Stanko
AU  - Mlinar, Vlada
AU  - Arsoski, Vladimir
PY  - 2005
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6741
AB  - Četvrto stanje materijala (po nekim podelama to je plazma, a po nekim su prahovi) predstavlja predmet izučavanja u velikom broju istraživačkih oblasti, tehnika i prakse.  Tehnike rasejanja svojim fundamentalnim pristupom mikročesticama metrološki objedinjuju prahove, kapljice, emulzije, rastvore, i sl.  U radu se paralelno razmatraju neke optičke (holografske, difrakcione) metode sa drugim metodama kojima se fizički i hemijski karakterišu i identifikuju čestice (ili ansamblli).  Dimenzija objekta se gleda u odnosu na talasnu dužinu primenjenog koherentnog (ili nekoherentnog) zračenja, talasne vektore perturbovanog i neperturbovanog snopa i ugla posmatranja.
AB  - The fourth state of matter (after some classification, it is plasma, after some other, it is powder) is object of investigation in great number of research areas, techniques and practice.  Scattering techniques metrologically unify powder, droplets, emulsions, solutions etc. by fundamental approach to micro-particles.  In this paper, some optical methods (holographic, diffractive) are comparatively described with other methods which physically and chemically characterize and identify particles (or particle ansambles).  Object size is estimated considering wavelength of applied coherent (or incoherent) radiation, wave vector of perturbed and non-perturbed beam and observation angle.
C3  - Četvrti kongres metrologa 2003 - Zbornik radova
T1  - Ocena dimenzija rasejavača laserskim tehnikama
T1  - Estimation of a scatterer size by laser tehniques
EP  - 546
SP  - 539
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6741
ER  - 

@conference{
author = "Srećković, Milesa and Ilić, Jelena and Tomić, Željka and Ristić, Slavica and Aranđelović, Slobodan and Kovačević, Aleksander and Ostojić, Stanko and Mlinar, Vlada and Arsoski, Vladimir",
year = "2005",
abstract = "Četvrto stanje materijala (po nekim podelama to je plazma, a po nekim su prahovi) predstavlja predmet izučavanja u velikom broju istraživačkih oblasti, tehnika i prakse.  Tehnike rasejanja svojim fundamentalnim pristupom mikročesticama metrološki objedinjuju prahove, kapljice, emulzije, rastvore, i sl.  U radu se paralelno razmatraju neke optičke (holografske, difrakcione) metode sa drugim metodama kojima se fizički i hemijski karakterišu i identifikuju čestice (ili ansamblli).  Dimenzija objekta se gleda u odnosu na talasnu dužinu primenjenog koherentnog (ili nekoherentnog) zračenja, talasne vektore perturbovanog i neperturbovanog snopa i ugla posmatranja., The fourth state of matter (after some classification, it is plasma, after some other, it is powder) is object of investigation in great number of research areas, techniques and practice.  Scattering techniques metrologically unify powder, droplets, emulsions, solutions etc. by fundamental approach to micro-particles.  In this paper, some optical methods (holographic, diffractive) are comparatively described with other methods which physically and chemically characterize and identify particles (or particle ansambles).  Object size is estimated considering wavelength of applied coherent (or incoherent) radiation, wave vector of perturbed and non-perturbed beam and observation angle.",
journal = "Četvrti kongres metrologa 2003 - Zbornik radova",
title = "Ocena dimenzija rasejavača laserskim tehnikama, Estimation of a scatterer size by laser tehniques",
pages = "546-539",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6741"
}

Srećković, M., Ilić, J., Tomić, Ž., Ristić, S., Aranđelović, S., Kovačević, A., Ostojić, S., Mlinar, V.,& Arsoski, V.. (2005). Ocena dimenzija rasejavača laserskim tehnikama. in Četvrti kongres metrologa 2003 - Zbornik radova, 539-546.
https://hdl.handle.net/21.15107/rcub_machinery_6741

Srećković M, Ilić J, Tomić Ž, Ristić S, Aranđelović S, Kovačević A, Ostojić S, Mlinar V, Arsoski V. Ocena dimenzija rasejavača laserskim tehnikama. in Četvrti kongres metrologa 2003 - Zbornik radova. 2005;:539-546.
https://hdl.handle.net/21.15107/rcub_machinery_6741 .

Srećković, Milesa, Ilić, Jelena, Tomić, Željka, Ristić, Slavica, Aranđelović, Slobodan, Kovačević, Aleksander, Ostojić, Stanko, Mlinar, Vlada, Arsoski, Vladimir, "Ocena dimenzija rasejavača laserskim tehnikama" in Četvrti kongres metrologa 2003 - Zbornik radova (2005):539-546,
https://hdl.handle.net/21.15107/rcub_machinery_6741 .

TY  - CONF
AU  - Ilić, Jelena
AU  - Srećković, Milesa
PY  - 2005
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6740
AB  - U radu su opisane merne tehnike koje se danas najčešće koriste u ispitivanjima tokova fluida i neke koje, u bliskoj budućnosti, to obećavaju.  Među tehnikama vizualizacije pažnja je posvećena šliren tehnici.  Predstavljeni su principi i varijante anemometrije snimanjem čestica (PIV) i holografske tehnike ispitivanja tokova fluida.  Zatim su objašnjene laserske Dopler tehnike – laser Dopler anemometrija (LDV), planarna Dopler anemometrija (PDV).  Za svaku od navedenih tehnika su razmotrene prostorne i vremenske rezolucije, izvori mernih nesigurnosti, faktori uticaja na osetljivost tehnike kao i pogodnosti primene u zavisnosti od pretpostavljenog dinamičkog režima toka fluida.
AB  - The paper describes the measurement techniques that are, or supposedly soon will be, the most readily used in the fluid flow research.  Among the visualization techniques, the attention is paid to schlieren technique.  The principles and the varieties of particle image velocimetry (PIV) and holographic fluid flow research techniques are presented.  Then, Doppler techniques – laser Doppler velocimetry (LDV) and planar Doppler velocimetry (PDV) are explained.  For each of the mentioned techniques, the spatial and temporal resolutions, the sources of measurement uncertainties, the influences on technique sensitivity as well as the suitableness of its application with respect to the presupposed dynamic regime of fluid flow are considered.
PB  - Mašinski fakultet Univerziteta u Beogradu
C3  - Četvrti kongres metrologa 2003 - Zbornik radova
T1  - Poređenje optičkih mernih tehnika u ispitivanjma tokova fluida
T1  - Comparison of optical measurement techniques in fluid flow investigation
EP  - 436
SP  - 424
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6740
ER  - 

@conference{
author = "Ilić, Jelena and Srećković, Milesa",
year = "2005",
abstract = "U radu su opisane merne tehnike koje se danas najčešće koriste u ispitivanjima tokova fluida i neke koje, u bliskoj budućnosti, to obećavaju.  Među tehnikama vizualizacije pažnja je posvećena šliren tehnici.  Predstavljeni su principi i varijante anemometrije snimanjem čestica (PIV) i holografske tehnike ispitivanja tokova fluida.  Zatim su objašnjene laserske Dopler tehnike – laser Dopler anemometrija (LDV), planarna Dopler anemometrija (PDV).  Za svaku od navedenih tehnika su razmotrene prostorne i vremenske rezolucije, izvori mernih nesigurnosti, faktori uticaja na osetljivost tehnike kao i pogodnosti primene u zavisnosti od pretpostavljenog dinamičkog režima toka fluida., The paper describes the measurement techniques that are, or supposedly soon will be, the most readily used in the fluid flow research.  Among the visualization techniques, the attention is paid to schlieren technique.  The principles and the varieties of particle image velocimetry (PIV) and holographic fluid flow research techniques are presented.  Then, Doppler techniques – laser Doppler velocimetry (LDV) and planar Doppler velocimetry (PDV) are explained.  For each of the mentioned techniques, the spatial and temporal resolutions, the sources of measurement uncertainties, the influences on technique sensitivity as well as the suitableness of its application with respect to the presupposed dynamic regime of fluid flow are considered.",
publisher = "Mašinski fakultet Univerziteta u Beogradu",
journal = "Četvrti kongres metrologa 2003 - Zbornik radova",
title = "Poređenje optičkih mernih tehnika u ispitivanjma tokova fluida, Comparison of optical measurement techniques in fluid flow investigation",
pages = "436-424",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6740"
}

Ilić, J.,& Srećković, M.. (2005). Poređenje optičkih mernih tehnika u ispitivanjma tokova fluida. in Četvrti kongres metrologa 2003 - Zbornik radova
Mašinski fakultet Univerziteta u Beogradu., 424-436.
https://hdl.handle.net/21.15107/rcub_machinery_6740

Ilić J, Srećković M. Poređenje optičkih mernih tehnika u ispitivanjma tokova fluida. in Četvrti kongres metrologa 2003 - Zbornik radova. 2005;:424-436.
https://hdl.handle.net/21.15107/rcub_machinery_6740 .

Ilić, Jelena, Srećković, Milesa, "Poređenje optičkih mernih tehnika u ispitivanjma tokova fluida" in Četvrti kongres metrologa 2003 - Zbornik radova (2005):424-436,
https://hdl.handle.net/21.15107/rcub_machinery_6740 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Ristić, Slavica
AU  - Družijanić, Dragan
AU  - Tomić, Željka
AU  - Gospavić, Radovan
AU  - Ilić, Jelena
AU  - Milošević, N.
AU  - Popov, Viktor
AU  - Burzić, Z.
AU  - Đokić, Biljana
PY  - 2005
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6706
PB  - Josip Juraj Strossmayer University of Osijek
PB  - Mechanical Enginering Faculty in Slavonski Brod
PB  - DAAAM International, Vienna
C3  - Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries
T1  - Some aspects of the theory and praxis on laser interaction with the material for special construction
EP  - 326
SP  - 321
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6706
ER  - 

@conference{
author = "Srećković, Milesa and Ristić, Slavica and Družijanić, Dragan and Tomić, Željka and Gospavić, Radovan and Ilić, Jelena and Milošević, N. and Popov, Viktor and Burzić, Z. and Đokić, Biljana",
year = "2005",
publisher = "Josip Juraj Strossmayer University of Osijek, Mechanical Enginering Faculty in Slavonski Brod, DAAAM International, Vienna",
journal = "Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries",
title = "Some aspects of the theory and praxis on laser interaction with the material for special construction",
pages = "326-321",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6706"
}

Srećković, M., Ristić, S., Družijanić, D., Tomić, Ž., Gospavić, R., Ilić, J., Milošević, N., Popov, V., Burzić, Z.,& Đokić, B.. (2005). Some aspects of the theory and praxis on laser interaction with the material for special construction. in Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries
Josip Juraj Strossmayer University of Osijek., 321-326.
https://hdl.handle.net/21.15107/rcub_machinery_6706

Srećković M, Ristić S, Družijanić D, Tomić Ž, Gospavić R, Ilić J, Milošević N, Popov V, Burzić Z, Đokić B. Some aspects of the theory and praxis on laser interaction with the material for special construction. in Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries. 2005;:321-326.
https://hdl.handle.net/21.15107/rcub_machinery_6706 .

Srećković, Milesa, Ristić, Slavica, Družijanić, Dragan, Tomić, Željka, Gospavić, Radovan, Ilić, Jelena, Milošević, N., Popov, Viktor, Burzić, Z., Đokić, Biljana, "Some aspects of the theory and praxis on laser interaction with the material for special construction" in Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries (2005):321-326,
https://hdl.handle.net/21.15107/rcub_machinery_6706 .