Search
Now showing items 21-30 of 291
The austempering study of alloyed ductile iron
(Elsevier Sci Ltd, Oxford, 2006)
Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can ...
A computer code for the prediction of mill gases and hot air distribution between burners' sections at the utility boiler
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
One of the main tasks during the design or simulation and analyses of the utility steam boiler operation is the prediction of a distribution of mill gases and hot air flow rates between burners' sections. These are the ...
Ductile crack growth initiation in welded joints - Micromechanical approach
(Welding in the World, 2008)
The integrity of welded structures depends on the load-carrying capacities of their welded joints. Having in mind that welding process produces a large microstructural gradient through the weld, resulting in variation of ...
Defining the memory function for tension and deformation of linear textile products on the basis of their rheological models
(Industria Textila, 2009)
Defining the memory function for tension and deformation of linear textile products on the basis of their rheological models On the basis of rheological models for yarn elongation, which have been set out for three different ...
Mock-up testing facilities and qualification strategy for EU ITER TBMs
(Elsevier Science Sa, Lausanne, 2010)
European test blanket modules (TBM) for both European blanket concepts, namely the Helium Cooled Lithium Lead (HCLL) and the Helium Cooled Pebble Bed (HCPB), and their auxiliary systems have been designed in the last years. ...
Sustainable sub-geothermal heat pump heating in Serbia
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Considering the necessity of improvement of Serbian energy production structure through higher participation of clean and renewable energy sources, the possibility of utilization of low enthalpy geothermal waters have been ...
Failure analysis of the combat jet aircraft rudder shaft
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This paper analyzes failure causes of the combat jet aircraft rudder shaft (RS) which occurred during the flight mission. A finite element method (FEM), utilized to determine the stress state of the RS subjected to hinge ...
Estimation of the number of trays for natural gas triethylene glycol dehydration column
(Elsevier, Amsterdam, 2011)
The paper deals with the tray-to-tray method for determining the required number of trays in columns with intensive entrainment of liquid when the operating line of the "dry working regime" is not straight and with a small ...
Measurement of local deformation fields in dental composites using 3d optical system
(Chemicke Listy, 2011)
Polymerization shrinkage is the single most important local deformation of dental composites that has a substantial effect on the quality of the tooth-restoration interface in clinical conditions. The aim of this study was ...
Influence of forward scattering on prediction of temperature and radiation fields inside the pulverized coal furnace
(Pergamon-Elsevier Science Ltd, Oxford, 2012)
A possibility of simplification of the scattering phase function of a pulverized coal flame was analyzed in the paper. It was showed that the type of radiation scattering of a pulverized coal flame is between two limiting ...