Претраживање
Приказ резултата 11-20 од 83
Model analysis of bucket wheel excavator SchRs 630 strength
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
The possibilities of testing real constructions are often limited, especially in case of large constructions. The idea of model testing is to create a sub-scaled model in order to anticipate the behavior of the real ...
Group theoretical formulation of quadrilateral and hexahedral isoparametric finite elements
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
The group supermatrix procedure, developed by Zlokovic, is applied for derivation of stiffness matrices of quadrilateral and hexahedral isoparametric finite elements using the symmetry groups C-2v and D-2h respectively. ...
New modular concept for the helium cooled pebble bed test blanket module for ITER
(Elsevier Science Sa, Lausanne, 2005)
Starting from the latest European design of the HCPB blanket for the DEMO a test blanket module for ITER has been deduced. The paper describes the new design and presents the rational of the design choices and the results ...
A computer code for the prediction of mill gases and hot air distribution between burners' sections at the utility boiler
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
One of the main tasks during the design or simulation and analyses of the utility steam boiler operation is the prediction of a distribution of mill gases and hot air flow rates between burners' sections. These are the ...
Design of capacitive voltage divider for measuring ultrafast voltages
(Elsevier Sci Ltd, Oxford, 2018)
The aim of this paper is to consider and analyze design of capacitive voltage divider for measuring ultrafast voltage occurrence. Measuring pulse voltages by means of a capacitive divider in nanosecond range is affected ...
Thermal-hydraulics of helium cooled First Wall channels and scoping investigations on performance improvement by application of ribs and mixing devices
(Elsevier Science Sa, Lausanne, 2016)
The first wall (FW) of DEMO is a component with high thermal loads. The cooling of the FW has to comply with the material's upper and lower temperature limits and requirements from stress assessment, like low temperature ...
Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, the results of determining the Paris law coefficients, C and m, are presented, based on the experimental data obtained by three-point bending testing of 8 welded joint specimens. The specimens were taken ...
Fracture mechanics and fatigue crack propagation in armor steel welds
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The welding process of armor steel is a complex process due to possible welding faults appearing in all zones of weld metal joint in the form of cracks and pores, as results of high percentage of carbon in the base metal. ...
Fatigue crack growth in a structure exposed to high temperature
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
The exhaust nozzle, made of titanium, is the part of a jet engine where the final expansion of the hot gas from the turbine occurs and where the speed of the exhaust gas is further increased to create thrust. During the ...
Butt welded joints assessment after fire exposure
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The need of in service life of a steel structure after being exposed to fire raises the problem of strengthening or replacement of some structural elements. In many cases, after structural safety assessment, fire exposed ...