Претраживање
Приказ резултата 11-19 од 19
Heat pump supplemental heating system for motor vehicles
(Sage Publications Ltd, London, 2004)
The paper deals with the importance of supplemental heating of motor vehicles and the possibilities of automotive heat pump system utilization. A prototype heat pump system for motor vehicles has been developed, built in ...
Effects of structure characteristics on mechanical properties of aluminum alloy matrix composites
(Trans Tech Publications Ltd, 2004)
Composite materials based on the CW67 alloy (Al base matrix) and volume fraction of 15 pet of SiC particles in two nominal sizes (0.7 μm and 33 μm) have been produced by hot pressing. The fracture behavior of the composite ...
Prof. Ivan Petrovic, PhD, M. Arch (1932-2000)
(Elsevier, Amsterdam, 2002)
The influence of microstructure on ductile fracture initiation in low-alloyed steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
In this paper the quantitative microstructural analysis of low-alloyed pressure vessel steel has been discussed. The values of volume fraction and mean free path of non-metallic inclusions determined in that way were used ...
An austempering study of ductile iron alloyed with copper
(Srpsko hemijsko društvo, Beograd, 2005)
Austempered ductile iron (ADI) has proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties ...
Nanoscale magnetic Behavior of C-60 thin films in earth magnetic field under polarization light influences
(Taylor & Francis Inc, Philadelphia, 2005)
Magnetic behavior of C-60 thin films in the Earths magnetic field under polarization light influence is presented. Transformation of magnetic field for two fullerene thin films of different thickness is investigated. Two ...
Damage Level Estimate of API J55 Steel for Welded Seam Casing Pipes
(Croation Union of Mech. Engineers and Naval Architects, 2009)
The subject of this paper is investigation of the damage level of API J55 steel, used for manufacturing casing pipes by high frequency (HF) contact welding. The analysed pipe was withdrawn after about 70 000 hours of service ...
An Approach to the Optimization of a Thin-walled Z-beam
(Strojniski Vestnik/Journal of Mechanical Engineering, 2009)
One approach to the optimization of a thin-walled open section Z-beam subjected to bending and to the constrained torsion is considered. For given loads, material and geometrical characteristics the problem is reduced to ...
Ductile fracture prediction of steam pipeline steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
Considering the conditions to which steels used for the manufacture of steam pipelines are exposed, the micromechanism of their destruction in exploitation is exclusively the ductile one. In order to make an estimation of ...