Претраживање
Приказ резултата 1-10 од 20
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
Transition temperature and fracture mode of as-castand austempered ductile iron
(Wiley, Hoboken, 2008)
The ductile to brittle transition temperature is a very important criterion that is used for selection of materials in some applications, especially in low-temperature conditions. For that reason, in this paper transition ...
The austempering study of alloyed ductile iron
(Elsevier Sci Ltd, Oxford, 2006)
Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can ...
Effect of microstructure on tensile properties of austenite-ferrite welded joint
(Faculty of Metallurgy, 2015)
Complex microstructure of austenite-ferrite welded joint has been investigated, focused on its influence on Focal tensile properties. Tensile properties (yield strength and hardening coefficient) have been evaluated by ...
The standard processing window of alloyed ADI materials
(Kovove Materialy, 2012)
In present paper the effect of austempering conditions and alloying elements on the microstructure, mechanical properties and processing window of Cu and Cu + Ni alloyed austempered ductile irons has been studied. A new ...
Material characterization of the main steam gate valve made of X20CrMoV 12.1 steel after long term service
(Elsevier Science Bv, Amsterdam, 2014)
Martensitic steel X20CrMo12.1 has been extensively used within the last few decades as a material for tubing systems and pipelines in thermal power plants (TPP). Long term behavior of this steel is very well known and ...
Impact Toughness of Friction Stir Welded Al-Mg Alloy
(Carl Hanser Verlag, Munich, 2014)
Al-Mg 5083 alloy was friction stir welded by varying welding variables, i.e., rotational speed, traversal speed and tool tilt angle. Welded specimens have been tested by the instrumented Charpy test to evaluate total ...
Selection of the most appropriate welding technology for hardfacing of bucket teeth
(Institute of Metals Technology, 2015)
A possibility of extending the service life of the working parts of construction machinery with particular attention to hardfacing of loader bucket teeth was investigated. In the first part of this paper the tribological ...
Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron
(Korean Inst Metals Materials, Seoul, 2014)
The aim of the paper was to investigate the effect of austempering parameters (time and temperature) on the microstructure and mechanical properties of ADI alloyed with 1.5% Cu and 1.6% Ni (in wt.%) in order to establish ...
Mehanička obrada pikosekundnim laserom osnovnog materijala i zavarenih spojeva legure Nimonik 263 / Picosecond laser shock peening of base Nimonic 263 material and laser welded Nimonic 263 alloy
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2015)
Lasersko zavarivanje je proces zavarivanja sa velikom gustinom energije i mnogobrojnim prednostima u odnosu na konvencionalne metode zavarivanja (uska zona uticaja toplote, manji unos toplote, manja distorzija i sl.) ...