The standard processing window of alloyed ADI materials
Само за регистроване кориснике
2012
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In present paper the effect of austempering conditions and alloying elements on the microstructure, mechanical properties and processing window of Cu and Cu + Ni alloyed austempered ductile irons has been studied. A new concept of "standard" processing window was suggested as an alternative to the well-known "microstructure" processing window. This concept is based on the ability to achieve mechanical properties required by different standards, namely ASTM, ISO and EN. The results obtained show that alloying with Cu + Ni produced ductile grades of ADI, while alloying with Cu grades of higher strength. The standard processing window depends on the austempering parameters and alloying elements, as well as standard used. The ISO and EN standards give a larger standard processing window compared to the ASTM. It was also shown, that from the engineering point of view, determination of a standard processing window gives great advantage compared to the microstructure processing window where s...pecial methods and procedures have to be used.
Кључне речи:
standard processing window / microstructure / mechanical properties / austempered ductile ironИзвор:
Kovove Materialy, 2012, 50, 3, 199-208Финансирање / пројекти:
- Пројектовање, развој и примена нове генерације ADI материјала (RS-MESTD-Technological Development (TD or TR)-34015)
DOI: 10.4149/km-2012-3-199
ISSN: 0023-432X
WoS: 000309852700009
Scopus: 2-s2.0-84866891362
Институција/група
Inovacioni centarTY - JOUR AU - Rajnović, Dragan AU - Erić, Olivera AU - Šiđanin, Leposava PY - 2012 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1477 AB - In present paper the effect of austempering conditions and alloying elements on the microstructure, mechanical properties and processing window of Cu and Cu + Ni alloyed austempered ductile irons has been studied. A new concept of "standard" processing window was suggested as an alternative to the well-known "microstructure" processing window. This concept is based on the ability to achieve mechanical properties required by different standards, namely ASTM, ISO and EN. The results obtained show that alloying with Cu + Ni produced ductile grades of ADI, while alloying with Cu grades of higher strength. The standard processing window depends on the austempering parameters and alloying elements, as well as standard used. The ISO and EN standards give a larger standard processing window compared to the ASTM. It was also shown, that from the engineering point of view, determination of a standard processing window gives great advantage compared to the microstructure processing window where special methods and procedures have to be used. T2 - Kovove Materialy T1 - The standard processing window of alloyed ADI materials EP - 208 IS - 3 SP - 199 VL - 50 DO - 10.4149/km-2012-3-199 ER -
@article{ author = "Rajnović, Dragan and Erić, Olivera and Šiđanin, Leposava", year = "2012", abstract = "In present paper the effect of austempering conditions and alloying elements on the microstructure, mechanical properties and processing window of Cu and Cu + Ni alloyed austempered ductile irons has been studied. A new concept of "standard" processing window was suggested as an alternative to the well-known "microstructure" processing window. This concept is based on the ability to achieve mechanical properties required by different standards, namely ASTM, ISO and EN. The results obtained show that alloying with Cu + Ni produced ductile grades of ADI, while alloying with Cu grades of higher strength. The standard processing window depends on the austempering parameters and alloying elements, as well as standard used. The ISO and EN standards give a larger standard processing window compared to the ASTM. It was also shown, that from the engineering point of view, determination of a standard processing window gives great advantage compared to the microstructure processing window where special methods and procedures have to be used.", journal = "Kovove Materialy", title = "The standard processing window of alloyed ADI materials", pages = "208-199", number = "3", volume = "50", doi = "10.4149/km-2012-3-199" }
Rajnović, D., Erić, O.,& Šiđanin, L.. (2012). The standard processing window of alloyed ADI materials. in Kovove Materialy, 50(3), 199-208. https://doi.org/10.4149/km-2012-3-199
Rajnović D, Erić O, Šiđanin L. The standard processing window of alloyed ADI materials. in Kovove Materialy. 2012;50(3):199-208. doi:10.4149/km-2012-3-199 .
Rajnović, Dragan, Erić, Olivera, Šiđanin, Leposava, "The standard processing window of alloyed ADI materials" in Kovove Materialy, 50, no. 3 (2012):199-208, https://doi.org/10.4149/km-2012-3-199 . .