Претраживање
Приказ резултата 181-190 од 207
Effect of building direction and heat treatment on mechanical properties of Inconel 939 prepared by additive manufacturing
(Springer Nature, 2023)
This study investigated the effect of building direction (BD) and three-step heat treatment on the microstructure and mechanical properties of a nickel-based superalloy Inconel 939 produced by additive manufacturing (AM), ...
Dynamic Nonlinear Temperature Field in a Ferromagnetic Plate Induced by High Frequency Electromagnetic Waves
(Croation Union of Mech. Engineers and Naval Architects, 2010)
The subject of this paper is the thermal-behavior of an elastic metallic plate influenced by several harmonic electromagnetic plane waves at the upper and lower surfaces. The direction of wave propagation is normal to the ...
Effect of elevated temperatures on mechanical properties of ultra high strength hot work tool steel h11
(Univ Zagreb Fac Mechanical Engineering & Naval Architecture, Zagreb, 2020)
This paper presents an experimental and numerical study into the influence of elevated temperatures on mechanical properties of the heat treated high quality hot work tool steel H11. This steel belongs to a group of alloyed ...
Environmental, social and other non-profit impacts Of mountain streams usage as Renewable energy resources
(Technical Institute of Bijeljina Republic of Srpska - Bosnia and Herzegovina, 2023)
The main subject of this manuscript is mountain streams used by construction of small hydro power plants. The motivation for this research stemmed from a number of conflicting opinions about the justification of the ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
(Springer, 2023)
Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for ...
Manufacturing parameter influence on FDM polypropylene tensile properties
(Journal of Mechanical Science and Technology, 2023)
Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic ...
Application of Composite Construction and Demolition Debris in Heavy Metals Removal from Industrial Wastewater
(Thermal Science, 2023)
The utilization of construction and demolition debris in industrial wastewater treatment by sorption of Co2+ and Ni2+ ions was investigated. Selected waste composites are cost-effective and locally available, still their ...
Mathematical modeling and experimental investigation of a composite beam failure - Case study
(London : Sage Publications Ltd, 2023)
Composite materials have been extensively employed in the aviation industry in recent years. The application of new materials enables significant weight savings with improved mechanical characteristics. This is also very ...
Crack Growth Rate Analysis of Stress Corrosion Cracking
(Univ Osijek, Tech Fac, Slavonski Brod, 2021)
A theoretical film rupture model was used for computational procedure to predict the crack growth rate within the Stress Corrosion Cracking (SCC) conditions. Chemical, electrochemical and mechanical aspects of the SCC were ...