Manufacturing parameter influence on FDM polypropylene tensile properties
Samo za registrovane korisnike
2023
Autori
Milovanović, AleksaGolubović, Zorana
Kirin, Snežana
Babinský, Tomáš
Šulák, Ivo
Milošević, Miloš
Sedmak, Aleksandar
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic material used in FDM technology. Not much research has been conducted on this FDM material so far, hence, the subject of this paper is the investigation of printing parameters’ influence on PP tensile properties. Targeted parameters are layer height, infill density, and the orientation of raster lines, resulting in four different manufacturing regimes. To have a better insight into the experimental results, the data are analysed using ANOVA statistical method with Tukey HSD post hoc test. Obtained statistical results have proven the printing parameter’s influence on tensile results, emphasizing the influence on elastic modulus. Here, Tukey test results show the maximal number of homogeneous subsets evidencing that all printing parameters have an influence on elastic mo...dulus values.
Ključne reči:
Fused deposition modeling / Polypropylene / Additive manufacturing parameters / ANOVAIzvor:
Journal of Mechanical Science and Technology, 2023, 37, 11, 1-7Finansiranje / projekti:
- European Union’s Horizon 2020 research and innovation program (H2020-WIDESPREAD-2018, SIRAMM), grant agreement No. 857124
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200105 (Univerzitet u Beogradu, Mašinski fakultet) (RS-MESTD-inst-2020-200105)
Kolekcije
Institucija/grupa
Inovacioni centarTY - JOUR AU - Milovanović, Aleksa AU - Golubović, Zorana AU - Kirin, Snežana AU - Babinský, Tomáš AU - Šulák, Ivo AU - Milošević, Miloš AU - Sedmak, Aleksandar PY - 2023 UR - https://machinery.mas.bg.ac.rs/handle/123456789/7643 AB - Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic material used in FDM technology. Not much research has been conducted on this FDM material so far, hence, the subject of this paper is the investigation of printing parameters’ influence on PP tensile properties. Targeted parameters are layer height, infill density, and the orientation of raster lines, resulting in four different manufacturing regimes. To have a better insight into the experimental results, the data are analysed using ANOVA statistical method with Tukey HSD post hoc test. Obtained statistical results have proven the printing parameter’s influence on tensile results, emphasizing the influence on elastic modulus. Here, Tukey test results show the maximal number of homogeneous subsets evidencing that all printing parameters have an influence on elastic modulus values. T2 - Journal of Mechanical Science and Technology T1 - Manufacturing parameter influence on FDM polypropylene tensile properties EP - 7 IS - 11 SP - 1 VL - 37 DO - 10.1007/s12206-023-2305-5 ER -
@article{ author = "Milovanović, Aleksa and Golubović, Zorana and Kirin, Snežana and Babinský, Tomáš and Šulák, Ivo and Milošević, Miloš and Sedmak, Aleksandar", year = "2023", abstract = "Polypropylene (PP) is a relatively new material in fused deposition modeling (FDM) technology. The main feature of this material is its ability to significantly elongate under applied load, unlike any other thermoplastic material used in FDM technology. Not much research has been conducted on this FDM material so far, hence, the subject of this paper is the investigation of printing parameters’ influence on PP tensile properties. Targeted parameters are layer height, infill density, and the orientation of raster lines, resulting in four different manufacturing regimes. To have a better insight into the experimental results, the data are analysed using ANOVA statistical method with Tukey HSD post hoc test. Obtained statistical results have proven the printing parameter’s influence on tensile results, emphasizing the influence on elastic modulus. Here, Tukey test results show the maximal number of homogeneous subsets evidencing that all printing parameters have an influence on elastic modulus values.", journal = "Journal of Mechanical Science and Technology", title = "Manufacturing parameter influence on FDM polypropylene tensile properties", pages = "7-1", number = "11", volume = "37", doi = "10.1007/s12206-023-2305-5" }
Milovanović, A., Golubović, Z., Kirin, S., Babinský, T., Šulák, I., Milošević, M.,& Sedmak, A.. (2023). Manufacturing parameter influence on FDM polypropylene tensile properties. in Journal of Mechanical Science and Technology, 37(11), 1-7. https://doi.org/10.1007/s12206-023-2305-5
Milovanović A, Golubović Z, Kirin S, Babinský T, Šulák I, Milošević M, Sedmak A. Manufacturing parameter influence on FDM polypropylene tensile properties. in Journal of Mechanical Science and Technology. 2023;37(11):1-7. doi:10.1007/s12206-023-2305-5 .
Milovanović, Aleksa, Golubović, Zorana, Kirin, Snežana, Babinský, Tomáš, Šulák, Ivo, Milošević, Miloš, Sedmak, Aleksandar, "Manufacturing parameter influence on FDM polypropylene tensile properties" in Journal of Mechanical Science and Technology, 37, no. 11 (2023):1-7, https://doi.org/10.1007/s12206-023-2305-5 . .