Претраживање
Приказ резултата 31-40 од 51
Failure investigation and reparation of a crack on the boom of the bucket wheel excavator ERS 1250 Gacko
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
Bucket wheel excavator ERs 1250 has been in operation for over 30 years in the Grae'anica-Gacko mining basin. It is operating in very hard working conditions due to exploiting very solid material, which has adverse effects ...
Crystallographic orientations of Ni3Al-based aluminide
(Elsevier Science Inc, New York, 2000)
Inverse pole figures have been plotted to determine preferred crystallographic orientations in a powder-compacted Ni3Al aluminide prealloyed with Fe, Ti and B. The main textural components, although weak, were noticeably ...
Group theoretical formulation of nonsymmetrical systems by the group supermatrix procedure
(Pergamon-Elsevier Science Ltd, Oxford, 1999)
The group supermatrix procedure, developed by Zlokovic for systems with symmetry properties described by groups, can be also applied to systems without symmetry. Transformation of a nonsymmetrical system into a system with ...
Microstructure and toughness of CuNiMo austempered ductile iron
(Elsevier, Amsterdam, 2004)
The effect of austempering on the microstructure and toughness of nodular cast iron (designated as CuNiMoSG) alloyed with molybdenum, copper, nickel, and manganese has been studied. Light microscopy (LM), scanning electron ...
Failure resistance of drilling rig casing pipes with an axial crack
(Pergamon-Elsevier Science Ltd, Oxford, 2015)
Working conditions of casing pipes in drilling rigs can significantly influence the initiation and development of damage in the material, and therefore also the safe service of the entire system. In this work, an integrity ...
The standard processing window of alloyed ADI materials
(Kovove Materialy, 2012)
In present paper the effect of austempering conditions and alloying elements on the microstructure, mechanical properties and processing window of Cu and Cu + Ni alloyed austempered ductile irons has been studied. A new ...
Experimental Investigation of the Efficiency of Heat Pump Drying System with Full Air Recirculation
(Wiley, Hoboken, 2017)
The paper presents results of an experimental investigation of convective drying of apples var. Idared, potatoes var. Desiree and bananas var. Grand Nein, in full recirculation laboratory-scale dryer. The experiments were ...
Numerical simulation of fatigue crack propagation in friction stir welded joint made of Al 2024-T351 alloy
(Pergamon-Elsevier Science Ltd, Oxford, 2015)
In this work, fatigue crack propagation in thin-walled aluminium alloy structure with two friction stir welded T joints has been simulated numerically. Crack propagation in stiffened part of the structure between two ...
Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy
(Springer Heidelberg, Heidelberg, 2018)
Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their ...
Set-up of a pre-test mock-up experiment in preparation for the HCPB Breeder Unit mock-up experimental campaign
(Elsevier Science Sa, Lausanne, 2013)
The complexity of the experimental set-up for testing a full-scaled Breeder Unit (BU) mock-up for the European Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) has motivated to build a pre-test mock-up experiment ...