Pretraživanje
Prikaz rezultata 81-87 od 87
Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (hsla) steel on low cycle fatigue
(Faculty of Metallurgy, 2014)
High strength low-alloy steel under low cycle fatigue at a certain level of strain controlled achieve stabilized condition. During the fatigue loading stabilized hysteresis loop is determined, which typical cycle of ...
Influence of plasma spraying parameters on properties of thermal barrier coatings
(Taylor & Francis Ltd, Abingdon, 2013)
The aim of the present study is to investigate the influence of plasma spay deposition parameters on various properties of two standard thermal barrier coating (TBC) systems deposited on the steel substrate. Two TBC systems ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Science of Sintering, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
The Influence of Modifying Methods on the Quality of Eutectic and Hypereutectic Silumine for Diesel Engine Pistons
(International Journal of Cast Metals Research, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
High-temperature deformation behaviour of Ti3Al-11Nb intermetallic
(Carl Hanser Verlag, Munich, 2011)
A mechanism of high-temperature plasticity has been studied in terms of stress exponent and activation energy for deformation. A Ti3Al-based intermetallic was processed by hot-rolling in the two-phase field to accomplish ...
Comparison of cavitation erosion behavior od cordierite and zircon based samples using image and morphological analyses
(Materials Letters, 2018)
In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...