TY  - JOUR
AU  - Pijović, Milena
AU  - Manić, Nebojša
AU  - Vasić-Anicijević, Dragana
AU  - Krstić, Aleksandar
AU  - Mitrić, Miodrag
AU  - Matić, Tamara
AU  - Janković, Bojan
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3760
AB  - Pyrolytic tire (PT) chars were first produced from waste car tires (WCT) through carbonization process at 800 degrees C, for different retention times. Then, best PT-char sample by its physicochemical properties (WCT 800(1 h)) was further tested for its ability to adsorb Rhodamine B (RhB) dye from aqueous solutions. Structural characterization of synthesized material showed existence of graphene-based material, with average pore diameter of 22.8 nm and specific surface area of 55.8 m2.g- 1. Obtained carbon material meets specifications of commercial carbon black (CB). The yield of 33.6% of CB recovered has been achieved. Under the optimal conditions, 99.57% of RhB was removed. Adsorption of RhB obeys pseudo second-order model and Langmuir isotherm model. DFT (the density functional theory) was revealed that effective bonding of RhB onto WCT 800 originates from pi-electron interactions with aromatic moieties and chemical (or at least the electrostatic) interactions, between positive nitrogen and electron-rich surface groups.
PB  - Elsevier Science Sa, Lausanne
T2  - Diamond and Related Materials
T1  - Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study
VL  - 121
DO  - 10.1016/j.diamond.2021.108768
ER  - 

@article{
author = "Pijović, Milena and Manić, Nebojša and Vasić-Anicijević, Dragana and Krstić, Aleksandar and Mitrić, Miodrag and Matić, Tamara and Janković, Bojan",
year = "2022",
abstract = "Pyrolytic tire (PT) chars were first produced from waste car tires (WCT) through carbonization process at 800 degrees C, for different retention times. Then, best PT-char sample by its physicochemical properties (WCT 800(1 h)) was further tested for its ability to adsorb Rhodamine B (RhB) dye from aqueous solutions. Structural characterization of synthesized material showed existence of graphene-based material, with average pore diameter of 22.8 nm and specific surface area of 55.8 m2.g- 1. Obtained carbon material meets specifications of commercial carbon black (CB). The yield of 33.6% of CB recovered has been achieved. Under the optimal conditions, 99.57% of RhB was removed. Adsorption of RhB obeys pseudo second-order model and Langmuir isotherm model. DFT (the density functional theory) was revealed that effective bonding of RhB onto WCT 800 originates from pi-electron interactions with aromatic moieties and chemical (or at least the electrostatic) interactions, between positive nitrogen and electron-rich surface groups.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Diamond and Related Materials",
title = "Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study",
volume = "121",
doi = "10.1016/j.diamond.2021.108768"
}

Pijović, M., Manić, N., Vasić-Anicijević, D., Krstić, A., Mitrić, M., Matić, T.,& Janković, B.. (2022). Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study. in Diamond and Related Materials
Elsevier Science Sa, Lausanne., 121.
https://doi.org/10.1016/j.diamond.2021.108768

Pijović M, Manić N, Vasić-Anicijević D, Krstić A, Mitrić M, Matić T, Janković B. Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study. in Diamond and Related Materials. 2022;121.
doi:10.1016/j.diamond.2021.108768 .

Pijović, Milena, Manić, Nebojša, Vasić-Anicijević, Dragana, Krstić, Aleksandar, Mitrić, Miodrag, Matić, Tamara, Janković, Bojan, "Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study" in Diamond and Related Materials, 121 (2022),
https://doi.org/10.1016/j.diamond.2021.108768 . .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3009
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (alpha-, kappa-, gamma-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 degrees C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method over-comes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for epsilon'(r) and 0.003 for tan delta. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
PB  - Elsevier, Amsterdam
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
EP  - 2540
IS  - 11
SP  - 2533
VL  - 30
DO  - 10.1016/j.apt.2019.07.033
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (alpha-, kappa-, gamma-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 degrees C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method over-comes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for epsilon'(r) and 0.003 for tan delta. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
publisher = "Elsevier, Amsterdam",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
pages = "2540-2533",
number = "11",
volume = "30",
doi = "10.1016/j.apt.2019.07.033"
}

Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology
Elsevier, Amsterdam., 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033

Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033 .

Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 . .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Lević, Steva
AU  - Mitrović, Nebojša
AU  - Maričić, Aleksa
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3100
AB  - Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.
PB  - Springeropen, London
T2  - Journal of Advanced Ceramics
T1  - Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure
EP  - 147
IS  - 1
SP  - 133
VL  - 8
DO  - 10.1007/s40145-018-0301-5
ER  - 

@article{
author = "Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Lević, Steva and Mitrović, Nebojša and Maričić, Aleksa and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Multiferroic materials attracted a lot of attention in recent years because of their significant scientific interest and technological applications. The multiferroic core/shell powders have a better connectivity between the phases, resulting in superior dielectric and magneto electric properties. In this study, the influence of preparation condition on structure and properties of BaTiO3/α-Fe2O3 core/shell composite materials was examined. The five samples were obtained by varying synthesis conditions, such as synthesized method (co-precipitation and sonochemical method) and pH values of solution. XRD and Raman spectroscopy analyses were performed in order to determine phase composition and structural changes within samples. Morphology modifications were examined by SEM and EDS analyses. Finally, effect of structural and microstructural changes on magnetic and electrical properties was detected and explained.",
publisher = "Springeropen, London",
journal = "Journal of Advanced Ceramics",
title = "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure",
pages = "147-133",
number = "1",
volume = "8",
doi = "10.1007/s40145-018-0301-5"
}

Filipović, S., Pavlović, V. P., Mitrić, M., Lević, S., Mitrović, N., Maričić, A., Vlahović, B.,& Pavlović, V. B.. (2019). Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics
Springeropen, London., 8(1), 133-147.
https://doi.org/10.1007/s40145-018-0301-5

Filipović S, Pavlović VP, Mitrić M, Lević S, Mitrović N, Maričić A, Vlahović B, Pavlović VB. Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure. in Journal of Advanced Ceramics. 2019;8(1):133-147.
doi:10.1007/s40145-018-0301-5 .

Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Lević, Steva, Mitrović, Nebojša, Maričić, Aleksa, Vlahović, Branislav, Pavlović, Vladimir B., "Synthesis and characterization of BaTiO3/α-Fe2O3 core/shell structure" in Journal of Advanced Ceramics, 8, no. 1 (2019):133-147,
https://doi.org/10.1007/s40145-018-0301-5 . .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Balać, Igor
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0921883119302596
UR  - https://dais.sanu.ac.rs/123456789/7027
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3924
AB  - Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - The effect of ball milling on properties of sintered manganese-doped alumina
EP  - 2540
IS  - 11
SP  - 2533
VL  - 30
DO  - 10.1016/j.apt.2019.07.033
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Balać, Igor and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2019",
abstract = "Alumina-based compounds have many technological applications and attract great attention even after decades of investigation, due to their good chemical, electrical, and mechanical properties. A mixture of several alumina modifications (α-, κ-, γ-Al2O3) doped with 1 wt% of Mn2O3 was used for this experiment. The powder was mechanically activated for 60 min in an ethanol medium. After compaction, green bodies were sintered in the temperature range from 1200 to 1400 °C. Microstructures of the obtained specimens were investigated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS). The influence of morphological changes on electrical and mechanical properties was examined in detail. We have developed a test fixture and corresponding software for measurement of the relative dielectric permittivity and the loss tangent of ceramic specimens. This new method overcomes the problems of dimensions and shape of samples, as well as the problem of applying silver paste. The accuracy is around 2% for ε'r and 0.003 for tanδ. We demonstrate that the mechanical activation (MA) has the dominant influence on lowering the characteristic temperatures and microstructure development, which further leads to increased permittivity and tensile strength.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "The effect of ball milling on properties of sintered manganese-doped alumina",
pages = "2540-2533",
number = "11",
volume = "30",
doi = "10.1016/j.apt.2019.07.033"
}

Filipović, S., Obradović, N., Marković, S., Mitrić, M., Balać, I., Đorđević, A.,& Pavlović, V. B.. (2019). The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology
Elsevier., 30(11), 2533-2540.
https://doi.org/10.1016/j.apt.2019.07.033

Filipović S, Obradović N, Marković S, Mitrić M, Balać I, Đorđević A, Pavlović VB. The effect of ball milling on properties of sintered manganese-doped alumina. in Advanced Powder Technology. 2019;30(11):2533-2540.
doi:10.1016/j.apt.2019.07.033 .

Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Balać, Igor, Đorđević, Antonije, Pavlović, Vladimir B., "The effect of ball milling on properties of sintered manganese-doped alumina" in Advanced Powder Technology, 30, no. 11 (2019):2533-2540,
https://doi.org/10.1016/j.apt.2019.07.033 . .

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Bjelajac, Andjelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horvath, Endre
AU  - Forro, Laszlo
AU  - Vlahović, Branislav
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2834
AB  - One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.
PB  - ETRAN, Beograd
T2  - Science of Sintering
T1  - Structure and photocatalytic properties of sintered TiO2 nanotube arrays
EP  - 50
IS  - 1
SP  - 39
VL  - 50
DO  - 10.2298/SOS1801039V
ER  - 

@article{
author = "Vujančević, Jelena and Bjelajac, Andjelika and Ćirković, Jovana and Pavlović, Vera P. and Horvath, Endre and Forro, Laszlo and Vlahović, Branislav and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the as-anodized amorphous TiO2 nanotube films were sintered at elevated temperatures. The evolution of the morphology was visualized via scanning electron microscopy (SEM), while the crystalline structure was investigated by Xray diffraction (XRD) and Raman spectroscopy. The chemical composition was studied by Xray photoelectron spectroscopy (XPS). The effects of crystallinity and morphology of TiO2 nanotube (NTs) films on photocatalytic degradation of methyl orange (MO) in an aqueous solution under UV light irradiation were also investigated. The TiO2 nanotubes sintered at 650 degrees C for 30 min had the highest degree of crystallinity and exhibited the best photocatalytic activity among the studied TiO2 nanotube films.",
publisher = "ETRAN, Beograd",
journal = "Science of Sintering",
title = "Structure and photocatalytic properties of sintered TiO2 nanotube arrays",
pages = "50-39",
number = "1",
volume = "50",
doi = "10.2298/SOS1801039V"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horvath, E., Forro, L., Vlahović, B., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2018). Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering
ETRAN, Beograd., 50(1), 39-50.
https://doi.org/10.2298/SOS1801039V

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horvath E, Forro L, Vlahović B, Mitrić M, Janaćković Đ, Pavlović VB. Structure and photocatalytic properties of sintered TiO2 nanotube arrays. in Science of Sintering. 2018;50(1):39-50.
doi:10.2298/SOS1801039V .

Vujančević, Jelena, Bjelajac, Andjelika, Ćirković, Jovana, Pavlović, Vera P., Horvath, Endre, Forro, Laszlo, Vlahović, Branislav, Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Structure and photocatalytic properties of sintered TiO2 nanotube arrays" in Science of Sintering, 50, no. 1 (2018):39-50,
https://doi.org/10.2298/SOS1801039V . .

TY  - JOUR
AU  - Peleš, Adriana
AU  - Aleksić, Obrad
AU  - Pavlović, Vera P.
AU  - Djoković, Vladimir
AU  - Dojčilović, Radovan
AU  - Nikolić, Zoran
AU  - Marinković, Filip
AU  - Mitrić, Miodrag
AU  - Blagojević, Vladimir A.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2871
AB  - The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the gamma-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of alpha-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of beta-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric beta-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of beta-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles.
PB  - IOP Publishing Ltd, Bristol
T2  - Physica Scripta
T1  - Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films
IS  - 10
SP  - 105801
VL  - 93
DO  - 10.1088/1402-4896/aad749
ER  - 

@article{
author = "Peleš, Adriana and Aleksić, Obrad and Pavlović, Vera P. and Djoković, Vladimir and Dojčilović, Radovan and Nikolić, Zoran and Marinković, Filip and Mitrić, Miodrag and Blagojević, Vladimir A. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2018",
abstract = "The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the gamma-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of alpha-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of beta-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric beta-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of beta-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Physica Scripta",
title = "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films",
number = "10",
pages = "105801",
volume = "93",
doi = "10.1088/1402-4896/aad749"
}

Peleš, A., Aleksić, O., Pavlović, V. P., Djoković, V., Dojčilović, R., Nikolić, Z., Marinković, F., Mitrić, M., Blagojević, V. A., Vlahović, B.,& Pavlović, V. B.. (2018). Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films. in Physica Scripta
IOP Publishing Ltd, Bristol., 93(10), 105801.
https://doi.org/10.1088/1402-4896/aad749

Peleš A, Aleksić O, Pavlović VP, Djoković V, Dojčilović R, Nikolić Z, Marinković F, Mitrić M, Blagojević VA, Vlahović B, Pavlović VB. Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films. in Physica Scripta. 2018;93(10):105801.
doi:10.1088/1402-4896/aad749 .

Peleš, Adriana, Aleksić, Obrad, Pavlović, Vera P., Djoković, Vladimir, Dojčilović, Radovan, Nikolić, Zoran, Marinković, Filip, Mitrić, Miodrag, Blagojević, Vladimir A., Vlahović, Branislav, Pavlović, Vladimir B., "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films" in Physica Scripta, 93, no. 10 (2018):105801,
https://doi.org/10.1088/1402-4896/aad749 . .

TY  - JOUR
AU  - Peleš, Adriana
AU  - Aleksić, Obrad
AU  - Pavlović, Vera P.
AU  - Djoković, Vladimir
AU  - Dojčilović, Radovan
AU  - Nikolić, Z.
AU  - Marinković, Filip
AU  - Mitrić, Miodrag
AU  - Blagojević, Vladimir A.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4057
AB  - The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the gamma-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of alpha-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of beta-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric beta-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of beta-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles.
PB  - IOP Publishing
T2  - Physica Scripta
T1  - Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films
IS  - 10
SP  - 105801
VL  - 93
DO  - 10.1088/1402-4896/aad749
ER  - 

@article{
author = "Peleš, Adriana and Aleksić, Obrad and Pavlović, Vera P. and Djoković, Vladimir and Dojčilović, Radovan and Nikolić, Z. and Marinković, Filip and Mitrić, Miodrag and Blagojević, Vladimir A. and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2018",
abstract = "The influence of the mechanical activation of ZnO nanoparticle fillers on the structural and electrical properties of the matrix of poly(vinylidenefluoride)-ZnO (PVDF-ZnO) films was investigated. Transmission electron microscopy and scanning electron microscopy analyses showed that mechanical activation in a high energy planetary ball mill reduces the size of ZnO particles. X-ray diffraction and Raman spectroscopy revealed that PVDF crystallized predominantly as the gamma-phase. Non-activated ZnO filler reduces the degree of the crystallinity of the matrix and promotes crystallization of alpha-phase of PVDF in the film, while the fillers activated for 5 and 10 min induce crystallization of beta-phase, indicating that mechanical activation of the filler can be used as a general method for fabrication of PVDF composites with increased content of piezoelectric beta-phase crystals. Dielectric spectroscopy measurements show that polymer composite with the high content of beta-phase (with ZnO filler activated for 5 min) exhibits the highest value of dielectric permittivity in 150-400 K range of temperatures. Kinetic analysis shows combined effects of increased surface area and increased concentration of surface defects on the interactions between polymer chains and activated nanoparticles.",
publisher = "IOP Publishing",
journal = "Physica Scripta",
title = "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films",
number = "10",
pages = "105801",
volume = "93",
doi = "10.1088/1402-4896/aad749"
}

Peleš, A., Aleksić, O., Pavlović, V. P., Djoković, V., Dojčilović, R., Nikolić, Z., Marinković, F., Mitrić, M., Blagojević, V. A., Vlahović, B.,& Pavlović, V. B.. (2018). Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films. in Physica Scripta
IOP Publishing., 93(10), 105801.
https://doi.org/10.1088/1402-4896/aad749

Peleš A, Aleksić O, Pavlović VP, Djoković V, Dojčilović R, Nikolić Z, Marinković F, Mitrić M, Blagojević VA, Vlahović B, Pavlović VB. Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films. in Physica Scripta. 2018;93(10):105801.
doi:10.1088/1402-4896/aad749 .

Peleš, Adriana, Aleksić, Obrad, Pavlović, Vera P., Djoković, Vladimir, Dojčilović, Radovan, Nikolić, Z., Marinković, Filip, Mitrić, Miodrag, Blagojević, Vladimir A., Vlahović, Branislav, Pavlović, Vladimir B., "Structural and electrical properties of ferroelectric poly(vinylidene fluoride) and mechanically activated ZnO nanoparticle composite films" in Physica Scripta, 93, no. 10 (2018):105801,
https://doi.org/10.1088/1402-4896/aad749 . .

TY  - JOUR
AU  - Brković, Danijela V.
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Obradović, Nina
AU  - Mitrić, Miodrag
AU  - Stevanović, Sanja
AU  - Vlahović, Branislav
AU  - Uskoković, Petar S.
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2587
AB  - The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. Different functional groups have been covalently attached on the MWCNTs sidewalls in order to induce interfacial interactions at nanofiller/polymer interface, which resulted in an improved nanomechanical features. Structural properties of nanocomposites, studied with XRD and Raman analysis, indicated the most pronounced decrease in a degree of amorphousness for samples containing 0.5 and 1 wt% of MWCNTs functionalized with dapsone (dapson-MWCNT) and diethyl malonate (dem-MWCNT). SEM and TEM micrographs confirmed improved dispersibility of the MWCNTs modified with aromatic structure of dapsone inside PMMA matrix. A significant increase in a glass transition temperature of over 60 degrees C has been found for the 1 wt% dapson-MWCNT nanocomposite. Additional modification of dapson-MWCNT by further increasing aromaticity and voluminosity of attached moiety (fid-MWCNT), showed 30 degrees C increases in a glass transition temperature at 4 wt% of nanofiller loading, which is similar to shift of 37 degrees C with loading of MWCNTs modified with ester terminal group. A maximum increase of 56% of reduced modulus and 86% of hardness was obtained for 1 wt% loading of dapson-MWCNT nanofiller.
PB  - Wiley, Hoboken
T2  - Polymer Composites
T1  - Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization
EP  - E489
SP  - E472
VL  - 38
DO  - 10.1002/pc.23996
ER  - 

@article{
author = "Brković, Danijela V. and Pavlović, Vladimir B. and Pavlović, Vera P. and Obradović, Nina and Mitrić, Miodrag and Stevanović, Sanja and Vlahović, Branislav and Uskoković, Petar S. and Marinković, Aleksandar D.",
year = "2017",
abstract = "The structural characteristics of polymer nanocomposites with functionalized multiwall carbon nanotubes (MWCNTs) in poly(methyl methacrylate) matrix have been studied in relation to nanofiller loading and surface functionality. Different functional groups have been covalently attached on the MWCNTs sidewalls in order to induce interfacial interactions at nanofiller/polymer interface, which resulted in an improved nanomechanical features. Structural properties of nanocomposites, studied with XRD and Raman analysis, indicated the most pronounced decrease in a degree of amorphousness for samples containing 0.5 and 1 wt% of MWCNTs functionalized with dapsone (dapson-MWCNT) and diethyl malonate (dem-MWCNT). SEM and TEM micrographs confirmed improved dispersibility of the MWCNTs modified with aromatic structure of dapsone inside PMMA matrix. A significant increase in a glass transition temperature of over 60 degrees C has been found for the 1 wt% dapson-MWCNT nanocomposite. Additional modification of dapson-MWCNT by further increasing aromaticity and voluminosity of attached moiety (fid-MWCNT), showed 30 degrees C increases in a glass transition temperature at 4 wt% of nanofiller loading, which is similar to shift of 37 degrees C with loading of MWCNTs modified with ester terminal group. A maximum increase of 56% of reduced modulus and 86% of hardness was obtained for 1 wt% loading of dapson-MWCNT nanofiller.",
publisher = "Wiley, Hoboken",
journal = "Polymer Composites",
title = "Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization",
pages = "E489-E472",
volume = "38",
doi = "10.1002/pc.23996"
}

Brković, D. V., Pavlović, V. B., Pavlović, V. P., Obradović, N., Mitrić, M., Stevanović, S., Vlahović, B., Uskoković, P. S.,& Marinković, A. D.. (2017). Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization. in Polymer Composites
Wiley, Hoboken., 38, E472-E489.
https://doi.org/10.1002/pc.23996

Brković DV, Pavlović VB, Pavlović VP, Obradović N, Mitrić M, Stevanović S, Vlahović B, Uskoković PS, Marinković AD. Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization. in Polymer Composites. 2017;38:E472-E489.
doi:10.1002/pc.23996 .

Brković, Danijela V., Pavlović, Vladimir B., Pavlović, Vera P., Obradović, Nina, Mitrić, Miodrag, Stevanović, Sanja, Vlahović, Branislav, Uskoković, Petar S., Marinković, Aleksandar D., "Structural Properties of the Multiwall Carbon Nanotubes/Poly(Methyl Methacrylate) Nanocomposites: Effect of the Multiwall Carbon Nanotubes Covalent Functionalization" in Polymer Composites, 38 (2017):E472-E489,
https://doi.org/10.1002/pc.23996 . .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko
AU  - Bjelajac, Andjelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6794
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Fourteenth Young Researchers' Conference -  Materials Sciences and Engineering, December 9-11 2015, Belgrade, Serbia, Program and the Book of Abstracts
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
EP  - 18
SP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6794
ER  - 

@conference{
author = "Vujančević, Jelena and Đokić, Veljko and Bjelajac, Andjelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2015",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Fourteenth Young Researchers' Conference -  Materials Sciences and Engineering, December 9-11 2015, Belgrade, Serbia, Program and the Book of Abstracts",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6794"
}

Vujančević, J., Đokić, V., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Fourteenth Young Researchers' Conference -  Materials Sciences and Engineering, December 9-11 2015, Belgrade, Serbia, Program and the Book of Abstracts
Belgrade : Institute of Technical Sciences of SASA., 18-18.
https://hdl.handle.net/21.15107/rcub_machinery_6794

Vujančević J, Đokić V, Bjelajac A, Pavlović VP, Mitrić M, Janaćković Đ, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Fourteenth Young Researchers' Conference -  Materials Sciences and Engineering, December 9-11 2015, Belgrade, Serbia, Program and the Book of Abstracts. 2015;:18-18.
https://hdl.handle.net/21.15107/rcub_machinery_6794 .

Vujančević, Jelena, Đokić, Veljko, Bjelajac, Andjelika, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" in Fourteenth Young Researchers' Conference -  Materials Sciences and Engineering, December 9-11 2015, Belgrade, Serbia, Program and the Book of Abstracts (2015):18-18,
https://hdl.handle.net/21.15107/rcub_machinery_6794 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Andjelika
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6793
AB  - The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.
PB  - Beograd : Serbian Ceramic Society
C3  - Advanced Ceramics and Application IV: New Frontiers in Multifunctional Material Science and Processing, 21-23 September 2015, Belgrade, Serbia, Program and the Book of Abstracts
T1  - Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
EP  - 81
SP  - 81
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6793
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Andjelika and Obradović, Nina and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Rašić, Goran and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2015",
abstract = "The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.",
publisher = "Beograd : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application IV: New Frontiers in Multifunctional Material Science and Processing, 21-23 September 2015, Belgrade, Serbia, Program and the Book of Abstracts",
title = "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures",
pages = "81-81",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6793"
}

Vujančević, J., Bjelajac, A., Obradović, N., Pavlović, V. P., Mitrić, M., Janaćković, Đ., Rašić, G., Vlahović, B.,& Pavlović, V. B.. (2015). Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application IV: New Frontiers in Multifunctional Material Science and Processing, 21-23 September 2015, Belgrade, Serbia, Program and the Book of Abstracts
Beograd : Serbian Ceramic Society., 81-81.
https://hdl.handle.net/21.15107/rcub_machinery_6793

Vujančević J, Bjelajac A, Obradović N, Pavlović VP, Mitrić M, Janaćković Đ, Rašić G, Vlahović B, Pavlović VB. Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application IV: New Frontiers in Multifunctional Material Science and Processing, 21-23 September 2015, Belgrade, Serbia, Program and the Book of Abstracts. 2015;:81-81.
https://hdl.handle.net/21.15107/rcub_machinery_6793 .

Vujančević, Jelena, Bjelajac, Andjelika, Obradović, Nina, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Rašić, Goran, Vlahović, Branislav, Pavlović, Vladimir B., "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures" in Advanced Ceramics and Application IV: New Frontiers in Multifunctional Material Science and Processing, 21-23 September 2015, Belgrade, Serbia, Program and the Book of Abstracts (2015):81-81,
https://hdl.handle.net/21.15107/rcub_machinery_6793 .

TY  - JOUR
AU  - Peleš, Adriana
AU  - Pavlović, Vera P.
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Mančić, Lidija
AU  - Krstić, Jugoslav B.
AU  - Mitrić, Miodrag
AU  - Vlahović, Branislav
AU  - Rasić, G.
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2087
AB  - Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Structural investigation of mechanically activated ZnO powder
EP  - 979
SP  - 971
VL  - 648
DO  - 10.1016/j.jallcom.2015.06.247
ER  - 

@article{
author = "Peleš, Adriana and Pavlović, Vera P. and Filipović, Suzana and Obradović, Nina and Mančić, Lidija and Krstić, Jugoslav B. and Mitrić, Miodrag and Vlahović, Branislav and Rasić, G. and Kosanović, Darko and Pavlović, Vladimir B.",
year = "2015",
abstract = "Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Structural investigation of mechanically activated ZnO powder",
pages = "979-971",
volume = "648",
doi = "10.1016/j.jallcom.2015.06.247"
}

Peleš, A., Pavlović, V. P., Filipović, S., Obradović, N., Mančić, L., Krstić, J. B., Mitrić, M., Vlahović, B., Rasić, G., Kosanović, D.,& Pavlović, V. B.. (2015). Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 648, 971-979.
https://doi.org/10.1016/j.jallcom.2015.06.247

Peleš A, Pavlović VP, Filipović S, Obradović N, Mančić L, Krstić JB, Mitrić M, Vlahović B, Rasić G, Kosanović D, Pavlović VB. Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds. 2015;648:971-979.
doi:10.1016/j.jallcom.2015.06.247 .

Peleš, Adriana, Pavlović, Vera P., Filipović, Suzana, Obradović, Nina, Mančić, Lidija, Krstić, Jugoslav B., Mitrić, Miodrag, Vlahović, Branislav, Rasić, G., Kosanović, Darko, Pavlović, Vladimir B., "Structural investigation of mechanically activated ZnO powder" in Journal of Alloys and Compounds, 648 (2015):971-979,
https://doi.org/10.1016/j.jallcom.2015.06.247 . .

TY  - JOUR
AU  - Peleš, Adriana
AU  - Pavlović, Vera P.
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Mančić, Lidija
AU  - Krstić, Jugoslav B.
AU  - Mitrić, Miodrag
AU  - Vlahović, Branislav
AU  - Rasić, G.
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3948
AB  - Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N2 physisorption , SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Structural investigation of mechanically activated ZnO powder
EP  - 979
SP  - 971
VL  - 648
DO  - 10.1016/j.jallcom.2015.06.247
ER  - 

@article{
author = "Peleš, Adriana and Pavlović, Vera P. and Filipović, Suzana and Obradović, Nina and Mančić, Lidija and Krstić, Jugoslav B. and Mitrić, Miodrag and Vlahović, Branislav and Rasić, G. and Kosanović, Darko and Pavlović, Vladimir B.",
year = "2015",
abstract = "Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N2 physisorption , SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Structural investigation of mechanically activated ZnO powder",
pages = "979-971",
volume = "648",
doi = "10.1016/j.jallcom.2015.06.247"
}

Peleš, A., Pavlović, V. P., Filipović, S., Obradović, N., Mančić, L., Krstić, J. B., Mitrić, M., Vlahović, B., Rasić, G., Kosanović, D.,& Pavlović, V. B.. (2015). Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 648, 971-979.
https://doi.org/10.1016/j.jallcom.2015.06.247

Peleš A, Pavlović VP, Filipović S, Obradović N, Mančić L, Krstić JB, Mitrić M, Vlahović B, Rasić G, Kosanović D, Pavlović VB. Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds. 2015;648:971-979.
doi:10.1016/j.jallcom.2015.06.247 .

Peleš, Adriana, Pavlović, Vera P., Filipović, Suzana, Obradović, Nina, Mančić, Lidija, Krstić, Jugoslav B., Mitrić, Miodrag, Vlahović, Branislav, Rasić, G., Kosanović, Darko, Pavlović, Vladimir B., "Structural investigation of mechanically activated ZnO powder" in Journal of Alloys and Compounds, 648 (2015):971-979,
https://doi.org/10.1016/j.jallcom.2015.06.247 . .

TY  - JOUR
AU  - Đorđević, Nataša
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Mitrić, Miodrag
AU  - Pavlović, Vera P.
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2022
AB  - Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400°C). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier sintering process at lower temperature. The influence of MoO3 on the preparation process of cordierite ceramics was investigated. 2MgO-2Al2O3-5SiO2 was researched by sintering followed binary systems: MgO/MoO3, Al2O3/MoO3 and SiO2/MoO3 (all sintered at 850°C and 1100°C, sintering time 2h). Composition of these systems was 80 mass% of oxide and 20 mass% MoO3. The effects of sintering, the composition and morphology were followed by X-ray diffraction and SEM microscopy. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3, which is the significance information for further research. MAS ceramics were sintered with 20 mass% MoO3 at 1100°C, 1200°C and 1300°C, during 2h.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis
EP  - 313
IS  - 3
SP  - 307
VL  - 46
DO  - 10.2298/SOS1403307D
ER  - 

@article{
author = "Đorđević, Nataša and Obradović, Nina and Kosanović, Darko and Mitrić, Miodrag and Pavlović, Vera P.",
year = "2014",
abstract = "Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400°C). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier sintering process at lower temperature. The influence of MoO3 on the preparation process of cordierite ceramics was investigated. 2MgO-2Al2O3-5SiO2 was researched by sintering followed binary systems: MgO/MoO3, Al2O3/MoO3 and SiO2/MoO3 (all sintered at 850°C and 1100°C, sintering time 2h). Composition of these systems was 80 mass% of oxide and 20 mass% MoO3. The effects of sintering, the composition and morphology were followed by X-ray diffraction and SEM microscopy. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3, which is the significance information for further research. MAS ceramics were sintered with 20 mass% MoO3 at 1100°C, 1200°C and 1300°C, during 2h.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis",
pages = "313-307",
number = "3",
volume = "46",
doi = "10.2298/SOS1403307D"
}

Đorđević, N., Obradović, N., Kosanović, D., Mitrić, M.,& Pavlović, V. P.. (2014). Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 46(3), 307-313.
https://doi.org/10.2298/SOS1403307D

Đorđević N, Obradović N, Kosanović D, Mitrić M, Pavlović VP. Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis. in Science of Sintering. 2014;46(3):307-313.
doi:10.2298/SOS1403307D .

Đorđević, Nataša, Obradović, Nina, Kosanović, Darko, Mitrić, Miodrag, Pavlović, Vera P., "Sintering of Cordierite in the Presence of MoO3 and Crystallization Analysis" in Science of Sintering, 46, no. 3 (2014):307-313,
https://doi.org/10.2298/SOS1403307D . .

TY  - CONF
AU  - Peleš, Adriana
AU  - Filipović, Suzana
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6788
AB  - In this paper, the authors investigated the influence of mechanicall activation of ZnO powder on crystal and micro structure. Because of its structure, ZnO could be used like filler in polymer ceramics nanocompozites. Performances of these material depend on filler morphology, surfaces, texture and size particle. According to this, ZnO powder was activated in a planetary ball mill for 2, 5, 10 and 30 minutes. Changes in crystal and micro structure were observed by SEM, XRD, Raman spectroscopy and UV-Vis Reflection. SEM micrographs show increase of agglomerates size with prolonged milling time. XRD patterns indicate that the peak intensities getting lower and expand with activation time. UV-Vis reflection shows that there is a clear difference in the spectra with increasing activation time. The results we got by the investigation of dinamical structure by Raman spectroscopy are in corelation with the other results of structures analysis. Results presented here enable further optimisation of the polymer nanocompozite based on ZnO and PVDF making process.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Twelfth Young Researchers' Conference -  Materials Sciences and Engineering, December 11-13, 2013, Belgrade, Serbia, Program and the Book of Abstracts
T1  - The influence of mechanical activation on the structure of ZnO
EP  - 11
SP  - 11
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6788
ER  - 

@conference{
author = "Peleš, Adriana and Filipović, Suzana and Pavlović, Vera P. and Mitrić, Miodrag and Obradović, Nina and Pavlović, Vladimir B.",
year = "2013",
abstract = "In this paper, the authors investigated the influence of mechanicall activation of ZnO powder on crystal and micro structure. Because of its structure, ZnO could be used like filler in polymer ceramics nanocompozites. Performances of these material depend on filler morphology, surfaces, texture and size particle. According to this, ZnO powder was activated in a planetary ball mill for 2, 5, 10 and 30 minutes. Changes in crystal and micro structure were observed by SEM, XRD, Raman spectroscopy and UV-Vis Reflection. SEM micrographs show increase of agglomerates size with prolonged milling time. XRD patterns indicate that the peak intensities getting lower and expand with activation time. UV-Vis reflection shows that there is a clear difference in the spectra with increasing activation time. The results we got by the investigation of dinamical structure by Raman spectroscopy are in corelation with the other results of structures analysis. Results presented here enable further optimisation of the polymer nanocompozite based on ZnO and PVDF making process.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Twelfth Young Researchers' Conference -  Materials Sciences and Engineering, December 11-13, 2013, Belgrade, Serbia, Program and the Book of Abstracts",
title = "The influence of mechanical activation on the structure of ZnO",
pages = "11-11",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6788"
}

Peleš, A., Filipović, S., Pavlović, V. P., Mitrić, M., Obradović, N.,& Pavlović, V. B.. (2013). The influence of mechanical activation on the structure of ZnO. in Twelfth Young Researchers' Conference -  Materials Sciences and Engineering, December 11-13, 2013, Belgrade, Serbia, Program and the Book of Abstracts
Belgrade : Institute of Technical Sciences of SASA., 11-11.
https://hdl.handle.net/21.15107/rcub_machinery_6788

Peleš A, Filipović S, Pavlović VP, Mitrić M, Obradović N, Pavlović VB. The influence of mechanical activation on the structure of ZnO. in Twelfth Young Researchers' Conference -  Materials Sciences and Engineering, December 11-13, 2013, Belgrade, Serbia, Program and the Book of Abstracts. 2013;:11-11.
https://hdl.handle.net/21.15107/rcub_machinery_6788 .

Peleš, Adriana, Filipović, Suzana, Pavlović, Vera P., Mitrić, Miodrag, Obradović, Nina, Pavlović, Vladimir B., "The influence of mechanical activation on the structure of ZnO" in Twelfth Young Researchers' Conference -  Materials Sciences and Engineering, December 11-13, 2013, Belgrade, Serbia, Program and the Book of Abstracts (2013):11-11,
https://hdl.handle.net/21.15107/rcub_machinery_6788 .