TY  - CONF
AU  - Stević, Zoran
AU  - Radovanović, Ilija
AU  - Stolić, Predrag
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Stević, Miša
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7130
AB  - This paper deals with research and analysis of energy efficiency in electric vehicles. In the
context of the increasing popularity of electric vehicles as a viable alternative to traditional internal
combustion vehicles, it becomes crucial to understand and improve their efficiency Factors affecting efficiency are considered, including aerodynamics, vehicle mass, electric drive and battery efficiency, as well as the influence of external factors such as route driving and speed. The research
results were then analyzed in order to determine the key factors that can increase the efficiency of
electric vehicles, such as optimizing aerodynamics, reducing vehicle mass and recovering braking
energy, which can significantly improve energy efficiency. Different ways of optimizing the electric
drive and batteries were also investigated in order to reduce energy loss during driving.
AB  - Ovaj rad se bavi istraživanjem i analizom energetske efikasnosti kod električnih vozila. U
kontekstu sve veće popularnosti električnih vozila kao održive alternative tradicionalnim vozilima
sa unutrašnjim sagorevanjem, postaje ključno razumeti i unaprediti njihovu efikasnost. Razmotreni
su faktori koji utiču na efikasnost, uključujući aerodinamičnost, masu vozila, efikasnost električnog
pogona i baterije, kao i uticaj eksternih faktora poput rute vožnje i brzine. Zatim su analizirani rezultati istraživanja kako bi se utvrdili ključni faktori koji mogu povećati efikasnost električnih
vozila, kao što su optimizacija aerodinamike, smanjenje mase vozila i vraćanje energije kočenja,
koji mogu značajno poboljšati energetsku efikasnost. Takođe su istraženi i različiti načini optimizacije električnog pogona i baterija kako bi se smanjio gubitak energije tokom vožnje.
PB  - SMEITS
C3  - 11th International Conference on Renewable Electrical Power Sources
T1  - Energy efficiency in electric vehicles
EP  - 208
SP  - 203
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7130
ER  - 

@conference{
author = "Stević, Zoran and Radovanović, Ilija and Stolić, Predrag and Petronić, Sanja and Jarić, Marko and Stević, Miša",
year = "2023",
abstract = "This paper deals with research and analysis of energy efficiency in electric vehicles. In the
context of the increasing popularity of electric vehicles as a viable alternative to traditional internal
combustion vehicles, it becomes crucial to understand and improve their efficiency Factors affecting efficiency are considered, including aerodynamics, vehicle mass, electric drive and battery efficiency, as well as the influence of external factors such as route driving and speed. The research
results were then analyzed in order to determine the key factors that can increase the efficiency of
electric vehicles, such as optimizing aerodynamics, reducing vehicle mass and recovering braking
energy, which can significantly improve energy efficiency. Different ways of optimizing the electric
drive and batteries were also investigated in order to reduce energy loss during driving., Ovaj rad se bavi istraživanjem i analizom energetske efikasnosti kod električnih vozila. U
kontekstu sve veće popularnosti električnih vozila kao održive alternative tradicionalnim vozilima
sa unutrašnjim sagorevanjem, postaje ključno razumeti i unaprediti njihovu efikasnost. Razmotreni
su faktori koji utiču na efikasnost, uključujući aerodinamičnost, masu vozila, efikasnost električnog
pogona i baterije, kao i uticaj eksternih faktora poput rute vožnje i brzine. Zatim su analizirani rezultati istraživanja kako bi se utvrdili ključni faktori koji mogu povećati efikasnost električnih
vozila, kao što su optimizacija aerodinamike, smanjenje mase vozila i vraćanje energije kočenja,
koji mogu značajno poboljšati energetsku efikasnost. Takođe su istraženi i različiti načini optimizacije električnog pogona i baterija kako bi se smanjio gubitak energije tokom vožnje.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Energy efficiency in electric vehicles",
pages = "208-203",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7130"
}

Stević, Z., Radovanović, I., Stolić, P., Petronić, S., Jarić, M.,& Stević, M.. (2023). Energy efficiency in electric vehicles. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 203-208.
https://hdl.handle.net/21.15107/rcub_machinery_7130

Stević Z, Radovanović I, Stolić P, Petronić S, Jarić M, Stević M. Energy efficiency in electric vehicles. in 11th International Conference on Renewable Electrical Power Sources. 2023;:203-208.
https://hdl.handle.net/21.15107/rcub_machinery_7130 .

Stević, Zoran, Radovanović, Ilija, Stolić, Predrag, Petronić, Sanja, Jarić, Marko, Stević, Miša, "Energy efficiency in electric vehicles" in 11th International Conference on Renewable Electrical Power Sources (2023):203-208,
https://hdl.handle.net/21.15107/rcub_machinery_7130 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
AU  - Jarić, Marko
AU  - Radovanović, Ilija
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7211
AB  - Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of these problems can be overcome by using open source solutions on the example of one such laboratory for basic and master academic studies in the mining engineering program, where students are given practical skills in of working with sensors, process monitoring, and similar activities.
PB  - MIET2023-Odesa-Ukraine
C3  - ISPC «Modern information and electronic technologies»
T1  - Application of open source solutions in the realization of low-cost teaching laboratories
EP  - 40
SP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7211
ER  - 

@conference{
author = "Stolić, Predrag and Stanimirović, Zdravko and Stanimirović, Ivanka and Jarić, Marko and Radovanović, Ilija and Stević, Zoran",
year = "2023",
abstract = "Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of these problems can be overcome by using open source solutions on the example of one such laboratory for basic and master academic studies in the mining engineering program, where students are given practical skills in of working with sensors, process monitoring, and similar activities.",
publisher = "MIET2023-Odesa-Ukraine",
journal = "ISPC «Modern information and electronic technologies»",
title = "Application of open source solutions in the realization of low-cost teaching laboratories",
pages = "40-36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7211"
}

Stolić, P., Stanimirović, Z., Stanimirović, I., Jarić, M., Radovanović, I.,& Stević, Z.. (2023). Application of open source solutions in the realization of low-cost teaching laboratories. in ISPC «Modern information and electronic technologies»
MIET2023-Odesa-Ukraine., 36-40.
https://hdl.handle.net/21.15107/rcub_machinery_7211

Stolić P, Stanimirović Z, Stanimirović I, Jarić M, Radovanović I, Stević Z. Application of open source solutions in the realization of low-cost teaching laboratories. in ISPC «Modern information and electronic technologies». 2023;:36-40.
https://hdl.handle.net/21.15107/rcub_machinery_7211 .

Stolić, Predrag, Stanimirović, Zdravko, Stanimirović, Ivanka, Jarić, Marko, Radovanović, Ilija, Stević, Zoran, "Application of open source solutions in the realization of low-cost teaching laboratories" in ISPC «Modern information and electronic technologies» (2023):36-40,
https://hdl.handle.net/21.15107/rcub_machinery_7211 .

TY  - CONF
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Budimir, Nikola
AU  - Stević, Zoran
AU  - Radovanović, Ilija
AU  - Stolić, Predrag
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7124
AB  - Storage tanks are exposed to external and internal corrosion. One successful tool for external corrosion protection is the cathodic protection system. This paper describes the cathodic protection system applied to the storage tank which works in the refinery. The cathodic protection system uses a sacrificial anode, and the measurements presented in this paper show that the anode is worn out. This paper presents a suggestion for the next step to protect the storage tank.
C3  - ISPC «Modern information and electronic technologies»
T1  - Analysis of cathodic protection system operation at the storage tanks in oil&gas industry
EP  - 83
SP  - 79
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7124
ER  - 

@conference{
author = "Petronić, Sanja and Jarić, Marko and Budimir, Nikola and Stević, Zoran and Radovanović, Ilija and Stolić, Predrag",
year = "2023",
abstract = "Storage tanks are exposed to external and internal corrosion. One successful tool for external corrosion protection is the cathodic protection system. This paper describes the cathodic protection system applied to the storage tank which works in the refinery. The cathodic protection system uses a sacrificial anode, and the measurements presented in this paper show that the anode is worn out. This paper presents a suggestion for the next step to protect the storage tank.",
journal = "ISPC «Modern information and electronic technologies»",
title = "Analysis of cathodic protection system operation at the storage tanks in oil&gas industry",
pages = "83-79",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7124"
}

Petronić, S., Jarić, M., Budimir, N., Stević, Z., Radovanović, I.,& Stolić, P.. (2023). Analysis of cathodic protection system operation at the storage tanks in oil&gas industry. in ISPC «Modern information and electronic technologies», 79-83.
https://hdl.handle.net/21.15107/rcub_machinery_7124

Petronić S, Jarić M, Budimir N, Stević Z, Radovanović I, Stolić P. Analysis of cathodic protection system operation at the storage tanks in oil&gas industry. in ISPC «Modern information and electronic technologies». 2023;:79-83.
https://hdl.handle.net/21.15107/rcub_machinery_7124 .

Petronić, Sanja, Jarić, Marko, Budimir, Nikola, Stević, Zoran, Radovanović, Ilija, Stolić, Predrag, "Analysis of cathodic protection system operation at the storage tanks in oil&gas industry" in ISPC «Modern information and electronic technologies» (2023):79-83,
https://hdl.handle.net/21.15107/rcub_machinery_7124 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
AU  - Jarić, Marko
AU  - Radovanović, Ilija
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7123
AB  - Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of
these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of
these problems can be overcome by using open source solutions on the example of one such laboratory for basic and
master academic studies in the mining engineering program, where students are given practical skills in of working
with sensors, process monitoring, and similar activities.
C3  - ISPC «Modern information and electronic technologies»
T1  - Application of open source solutions in the realization of low cost teaching laboratories
EP  - 39
SP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7123
ER  - 

@conference{
author = "Stolić, Predrag and Stanimirović, Zdravko and Stanimirović, Ivanka and Jarić, Marko and Radovanović, Ilija and Stević, Zoran",
year = "2023",
abstract = "Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of
these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of
these problems can be overcome by using open source solutions on the example of one such laboratory for basic and
master academic studies in the mining engineering program, where students are given practical skills in of working
with sensors, process monitoring, and similar activities.",
journal = "ISPC «Modern information and electronic technologies»",
title = "Application of open source solutions in the realization of low cost teaching laboratories",
pages = "39-36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7123"
}

Stolić, P., Stanimirović, Z., Stanimirović, I., Jarić, M., Radovanović, I.,& Stević, Z.. (2023). Application of open source solutions in the realization of low cost teaching laboratories. in ISPC «Modern information and electronic technologies», 36-39.
https://hdl.handle.net/21.15107/rcub_machinery_7123

Stolić P, Stanimirović Z, Stanimirović I, Jarić M, Radovanović I, Stević Z. Application of open source solutions in the realization of low cost teaching laboratories. in ISPC «Modern information and electronic technologies». 2023;:36-39.
https://hdl.handle.net/21.15107/rcub_machinery_7123 .

Stolić, Predrag, Stanimirović, Zdravko, Stanimirović, Ivanka, Jarić, Marko, Radovanović, Ilija, Stević, Zoran, "Application of open source solutions in the realization of low cost teaching laboratories" in ISPC «Modern information and electronic technologies» (2023):36-39,
https://hdl.handle.net/21.15107/rcub_machinery_7123 .