TY  - JOUR
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Stević, Zoran
AU  - Maslarević, Aleksandar
AU  - Vasović, Ivana
PY  - 2024
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7798
AB  - The paper presents a detailed description of the oil rectification process used in upstream oil and gas plants, including the significant equipment involved. One such equipment highlighted in the study is a pressure vessel utilized as a separator to separate the liquid and gas phases. This pressure vessel has been in operation for over two decades. A thorough examination of the mentioned pressure equipment was conducted during the process evaluation. It was discovered that the internal side of the vessel, particularly its back elliptical head, had suffered extensive damage due to erosion and corrosion, emerging as the most significant cause of the deterioration. The application of RBI-estimation revealed that the vessel falls under the category of highly risk equipment, and there is a significant risk of both environmental and financial consequences associated with its potential failure (leakage). Such failure is anticipated to occur promptly in the area below the wear plate of the vessel's nozzle.
PB  - Elsevier
T2  - International Journal of Pressure Vessels and Piping
T1  - Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix
SP  - 105206
VL  - 209
DO  - 10.1016/j.ijpvp.2024
ER  - 

@article{
author = "Petronić, Sanja and Jarić, Marko and Stević, Zoran and Maslarević, Aleksandar and Vasović, Ivana",
year = "2024",
abstract = "The paper presents a detailed description of the oil rectification process used in upstream oil and gas plants, including the significant equipment involved. One such equipment highlighted in the study is a pressure vessel utilized as a separator to separate the liquid and gas phases. This pressure vessel has been in operation for over two decades. A thorough examination of the mentioned pressure equipment was conducted during the process evaluation. It was discovered that the internal side of the vessel, particularly its back elliptical head, had suffered extensive damage due to erosion and corrosion, emerging as the most significant cause of the deterioration. The application of RBI-estimation revealed that the vessel falls under the category of highly risk equipment, and there is a significant risk of both environmental and financial consequences associated with its potential failure (leakage). Such failure is anticipated to occur promptly in the area below the wear plate of the vessel's nozzle.",
publisher = "Elsevier",
journal = "International Journal of Pressure Vessels and Piping",
title = "Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix",
pages = "105206",
volume = "209",
doi = "10.1016/j.ijpvp.2024"
}

Petronić, S., Jarić, M., Stević, Z., Maslarević, A.,& Vasović, I.. (2024). Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix. in International Journal of Pressure Vessels and Piping
Elsevier., 209, 105206.
https://doi.org/10.1016/j.ijpvp.2024

Petronić S, Jarić M, Stević Z, Maslarević A, Vasović I. Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix. in International Journal of Pressure Vessels and Piping. 2024;209:105206.
doi:10.1016/j.ijpvp.2024 .

Petronić, Sanja, Jarić, Marko, Stević, Zoran, Maslarević, Aleksandar, Vasović, Ivana, "Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix" in International Journal of Pressure Vessels and Piping, 209 (2024):105206,
https://doi.org/10.1016/j.ijpvp.2024 . .

TY  - CONF
AU  - Stević, Zoran
AU  - Radovanović, Ilija
AU  - Stolić, Predrag
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Stević, Miša
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7130
AB  - This paper deals with research and analysis of energy efficiency in electric vehicles. In the
context of the increasing popularity of electric vehicles as a viable alternative to traditional internal
combustion vehicles, it becomes crucial to understand and improve their efficiency Factors affecting efficiency are considered, including aerodynamics, vehicle mass, electric drive and battery efficiency, as well as the influence of external factors such as route driving and speed. The research
results were then analyzed in order to determine the key factors that can increase the efficiency of
electric vehicles, such as optimizing aerodynamics, reducing vehicle mass and recovering braking
energy, which can significantly improve energy efficiency. Different ways of optimizing the electric
drive and batteries were also investigated in order to reduce energy loss during driving.
AB  - Ovaj rad se bavi istraživanjem i analizom energetske efikasnosti kod električnih vozila. U
kontekstu sve veće popularnosti električnih vozila kao održive alternative tradicionalnim vozilima
sa unutrašnjim sagorevanjem, postaje ključno razumeti i unaprediti njihovu efikasnost. Razmotreni
su faktori koji utiču na efikasnost, uključujući aerodinamičnost, masu vozila, efikasnost električnog
pogona i baterije, kao i uticaj eksternih faktora poput rute vožnje i brzine. Zatim su analizirani rezultati istraživanja kako bi se utvrdili ključni faktori koji mogu povećati efikasnost električnih
vozila, kao što su optimizacija aerodinamike, smanjenje mase vozila i vraćanje energije kočenja,
koji mogu značajno poboljšati energetsku efikasnost. Takođe su istraženi i različiti načini optimizacije električnog pogona i baterija kako bi se smanjio gubitak energije tokom vožnje.
PB  - SMEITS
C3  - 11th International Conference on Renewable Electrical Power Sources
T1  - Energy efficiency in electric vehicles
EP  - 208
SP  - 203
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7130
ER  - 

@conference{
author = "Stević, Zoran and Radovanović, Ilija and Stolić, Predrag and Petronić, Sanja and Jarić, Marko and Stević, Miša",
year = "2023",
abstract = "This paper deals with research and analysis of energy efficiency in electric vehicles. In the
context of the increasing popularity of electric vehicles as a viable alternative to traditional internal
combustion vehicles, it becomes crucial to understand and improve their efficiency Factors affecting efficiency are considered, including aerodynamics, vehicle mass, electric drive and battery efficiency, as well as the influence of external factors such as route driving and speed. The research
results were then analyzed in order to determine the key factors that can increase the efficiency of
electric vehicles, such as optimizing aerodynamics, reducing vehicle mass and recovering braking
energy, which can significantly improve energy efficiency. Different ways of optimizing the electric
drive and batteries were also investigated in order to reduce energy loss during driving., Ovaj rad se bavi istraživanjem i analizom energetske efikasnosti kod električnih vozila. U
kontekstu sve veće popularnosti električnih vozila kao održive alternative tradicionalnim vozilima
sa unutrašnjim sagorevanjem, postaje ključno razumeti i unaprediti njihovu efikasnost. Razmotreni
su faktori koji utiču na efikasnost, uključujući aerodinamičnost, masu vozila, efikasnost električnog
pogona i baterije, kao i uticaj eksternih faktora poput rute vožnje i brzine. Zatim su analizirani rezultati istraživanja kako bi se utvrdili ključni faktori koji mogu povećati efikasnost električnih
vozila, kao što su optimizacija aerodinamike, smanjenje mase vozila i vraćanje energije kočenja,
koji mogu značajno poboljšati energetsku efikasnost. Takođe su istraženi i različiti načini optimizacije električnog pogona i baterija kako bi se smanjio gubitak energije tokom vožnje.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Energy efficiency in electric vehicles",
pages = "208-203",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7130"
}

Stević, Z., Radovanović, I., Stolić, P., Petronić, S., Jarić, M.,& Stević, M.. (2023). Energy efficiency in electric vehicles. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 203-208.
https://hdl.handle.net/21.15107/rcub_machinery_7130

Stević Z, Radovanović I, Stolić P, Petronić S, Jarić M, Stević M. Energy efficiency in electric vehicles. in 11th International Conference on Renewable Electrical Power Sources. 2023;:203-208.
https://hdl.handle.net/21.15107/rcub_machinery_7130 .

Stević, Zoran, Radovanović, Ilija, Stolić, Predrag, Petronić, Sanja, Jarić, Marko, Stević, Miša, "Energy efficiency in electric vehicles" in 11th International Conference on Renewable Electrical Power Sources (2023):203-208,
https://hdl.handle.net/21.15107/rcub_machinery_7130 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
AU  - Jarić, Marko
AU  - Radovanović, Ilija
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7211
AB  - Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of these problems can be overcome by using open source solutions on the example of one such laboratory for basic and master academic studies in the mining engineering program, where students are given practical skills in of working with sensors, process monitoring, and similar activities.
PB  - MIET2023-Odesa-Ukraine
C3  - ISPC «Modern information and electronic technologies»
T1  - Application of open source solutions in the realization of low-cost teaching laboratories
EP  - 40
SP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7211
ER  - 

@conference{
author = "Stolić, Predrag and Stanimirović, Zdravko and Stanimirović, Ivanka and Jarić, Marko and Radovanović, Ilija and Stević, Zoran",
year = "2023",
abstract = "Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of these problems can be overcome by using open source solutions on the example of one such laboratory for basic and master academic studies in the mining engineering program, where students are given practical skills in of working with sensors, process monitoring, and similar activities.",
publisher = "MIET2023-Odesa-Ukraine",
journal = "ISPC «Modern information and electronic technologies»",
title = "Application of open source solutions in the realization of low-cost teaching laboratories",
pages = "40-36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7211"
}

Stolić, P., Stanimirović, Z., Stanimirović, I., Jarić, M., Radovanović, I.,& Stević, Z.. (2023). Application of open source solutions in the realization of low-cost teaching laboratories. in ISPC «Modern information and electronic technologies»
MIET2023-Odesa-Ukraine., 36-40.
https://hdl.handle.net/21.15107/rcub_machinery_7211

Stolić P, Stanimirović Z, Stanimirović I, Jarić M, Radovanović I, Stević Z. Application of open source solutions in the realization of low-cost teaching laboratories. in ISPC «Modern information and electronic technologies». 2023;:36-40.
https://hdl.handle.net/21.15107/rcub_machinery_7211 .

Stolić, Predrag, Stanimirović, Zdravko, Stanimirović, Ivanka, Jarić, Marko, Radovanović, Ilija, Stević, Zoran, "Application of open source solutions in the realization of low-cost teaching laboratories" in ISPC «Modern information and electronic technologies» (2023):36-40,
https://hdl.handle.net/21.15107/rcub_machinery_7211 .

TY  - CONF
AU  - Petronić, Sanja
AU  - Jarić, Marko
AU  - Budimir, Nikola
AU  - Stević, Zoran
AU  - Radovanović, Ilija
AU  - Stolić, Predrag
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7124
AB  - Storage tanks are exposed to external and internal corrosion. One successful tool for external corrosion protection is the cathodic protection system. This paper describes the cathodic protection system applied to the storage tank which works in the refinery. The cathodic protection system uses a sacrificial anode, and the measurements presented in this paper show that the anode is worn out. This paper presents a suggestion for the next step to protect the storage tank.
C3  - ISPC «Modern information and electronic technologies»
T1  - Analysis of cathodic protection system operation at the storage tanks in oil&gas industry
EP  - 83
SP  - 79
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7124
ER  - 

@conference{
author = "Petronić, Sanja and Jarić, Marko and Budimir, Nikola and Stević, Zoran and Radovanović, Ilija and Stolić, Predrag",
year = "2023",
abstract = "Storage tanks are exposed to external and internal corrosion. One successful tool for external corrosion protection is the cathodic protection system. This paper describes the cathodic protection system applied to the storage tank which works in the refinery. The cathodic protection system uses a sacrificial anode, and the measurements presented in this paper show that the anode is worn out. This paper presents a suggestion for the next step to protect the storage tank.",
journal = "ISPC «Modern information and electronic technologies»",
title = "Analysis of cathodic protection system operation at the storage tanks in oil&gas industry",
pages = "83-79",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7124"
}

Petronić, S., Jarić, M., Budimir, N., Stević, Z., Radovanović, I.,& Stolić, P.. (2023). Analysis of cathodic protection system operation at the storage tanks in oil&gas industry. in ISPC «Modern information and electronic technologies», 79-83.
https://hdl.handle.net/21.15107/rcub_machinery_7124

Petronić S, Jarić M, Budimir N, Stević Z, Radovanović I, Stolić P. Analysis of cathodic protection system operation at the storage tanks in oil&gas industry. in ISPC «Modern information and electronic technologies». 2023;:79-83.
https://hdl.handle.net/21.15107/rcub_machinery_7124 .

Petronić, Sanja, Jarić, Marko, Budimir, Nikola, Stević, Zoran, Radovanović, Ilija, Stolić, Predrag, "Analysis of cathodic protection system operation at the storage tanks in oil&gas industry" in ISPC «Modern information and electronic technologies» (2023):79-83,
https://hdl.handle.net/21.15107/rcub_machinery_7124 .

TY  - GEN
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Stević, Zoran
AU  - Polić, Suzana
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7128
AB  - Cooling towers use significant amounts of water, and the cooling system is often the most efficient energy user in a building during the cooling season. Maximizing the energy efficiency of the cooling system can be significantly improved by optimising the cleanliness of the tower heat transfer surfaces and the heat transfer surfaces of the heat exchanger cooling system. Cooling towers belong to the group of contact heat exchangers, and they are an integral part of almost every process plant, which failure can produce long-term downtime and significant material losses. Bearing in mind this fact, it is necessary to check electric motor, the fan and its components in a reliable way in order to ensure the required continuity of the process in the appropriate period of time. Previously methods of checking fan parts in accordance with the manufacturer's manuals included only visual inspection of the fan blades and checking the tightening torque of the blades for their holders. The mentioned methods have proven ineffective and insufficient from the point of view of maintenance of process plants during working life, which has led to the fan's failure and the blade holder's breakage at the point of connection with the blade. Hence, for the needs of appropriate maintenance, new methods for assessing the condition of fan blade holders have been established, which include the application of conventional non-destructive methods for the assessment of surface and volumetric defects of blade holders. The mentioned method of checking the blade holders has presented in detail in this paper.
PB  - SMEITS
T2  - 11th International Conference on Renewable Electrical Power Sources
T1  - Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization
EP  - 43
SP  - 35
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7128
ER  - 

@misc{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Stević, Zoran and Polić, Suzana",
year = "2023",
abstract = "Cooling towers use significant amounts of water, and the cooling system is often the most efficient energy user in a building during the cooling season. Maximizing the energy efficiency of the cooling system can be significantly improved by optimising the cleanliness of the tower heat transfer surfaces and the heat transfer surfaces of the heat exchanger cooling system. Cooling towers belong to the group of contact heat exchangers, and they are an integral part of almost every process plant, which failure can produce long-term downtime and significant material losses. Bearing in mind this fact, it is necessary to check electric motor, the fan and its components in a reliable way in order to ensure the required continuity of the process in the appropriate period of time. Previously methods of checking fan parts in accordance with the manufacturer's manuals included only visual inspection of the fan blades and checking the tightening torque of the blades for their holders. The mentioned methods have proven ineffective and insufficient from the point of view of maintenance of process plants during working life, which has led to the fan's failure and the blade holder's breakage at the point of connection with the blade. Hence, for the needs of appropriate maintenance, new methods for assessing the condition of fan blade holders have been established, which include the application of conventional non-destructive methods for the assessment of surface and volumetric defects of blade holders. The mentioned method of checking the blade holders has presented in detail in this paper.",
publisher = "SMEITS",
journal = "11th International Conference on Renewable Electrical Power Sources",
title = "Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization",
pages = "43-35",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7128"
}

Jarić, M., Petronić, S., Budimir, N., Stević, Z.,& Polić, S.. (2023). Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization. in 11th International Conference on Renewable Electrical Power Sources
SMEITS., 35-43.
https://hdl.handle.net/21.15107/rcub_machinery_7128

Jarić M, Petronić S, Budimir N, Stević Z, Polić S. Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization. in 11th International Conference on Renewable Electrical Power Sources. 2023;:35-43.
https://hdl.handle.net/21.15107/rcub_machinery_7128 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Stević, Zoran, Polić, Suzana, "Non-destructive methods and improvement of the cooling tower operation reliability, as an aspect of renewable energy sources thematization" in 11th International Conference on Renewable Electrical Power Sources (2023):35-43,
https://hdl.handle.net/21.15107/rcub_machinery_7128 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Rajčić, Boris
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7127
AB  - The collector for impurities is a temporary tank that collects condensate from the condenser after oil purification process.. Large-scale distillation towers use a reflux system to achieve more complete product separation. The collector, or accumulator, serves as a distribution point for reflux and distillate. This paper deals with a collector that uses water and light hydrocarbons  as a working fluid, and is designed to operate under a pressure of 12 bar and a temperature of up to 91° C. Considering the working fluid, and work at elevated pressure, it belongs to the category of pressure vessels of a high level of danger. Its maintenance and regular inspection are a mandatory step in the prevention of failures and/or accident, and thus also in the protection of people and the environment. The paper describes tests of collector for impurities after oil purification and their importance; including a liquid penetrate inspection, ultrasonic measurement and visual inspection. Corrosion rate that occurs during the interaction of the working medium and the material of the collector was estimated such as and appropriate remaining working life. RBI analysis is performed.
PB  - University of Banja Luka Faculty of Mechanical Engineering
C3  - 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023
T1  - Importance of examination of collector for impurities after oil purification for human and environmental safety
EP  - 482
SP  - 477
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7127
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Rajčić, Boris and Stević, Zoran",
year = "2023",
abstract = "The collector for impurities is a temporary tank that collects condensate from the condenser after oil purification process.. Large-scale distillation towers use a reflux system to achieve more complete product separation. The collector, or accumulator, serves as a distribution point for reflux and distillate. This paper deals with a collector that uses water and light hydrocarbons  as a working fluid, and is designed to operate under a pressure of 12 bar and a temperature of up to 91° C. Considering the working fluid, and work at elevated pressure, it belongs to the category of pressure vessels of a high level of danger. Its maintenance and regular inspection are a mandatory step in the prevention of failures and/or accident, and thus also in the protection of people and the environment. The paper describes tests of collector for impurities after oil purification and their importance; including a liquid penetrate inspection, ultrasonic measurement and visual inspection. Corrosion rate that occurs during the interaction of the working medium and the material of the collector was estimated such as and appropriate remaining working life. RBI analysis is performed.",
publisher = "University of Banja Luka Faculty of Mechanical Engineering",
journal = "16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023",
title = "Importance of examination of collector for impurities after oil purification for human and environmental safety",
pages = "482-477",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7127"
}

Jarić, M., Petronić, S., Budimir, N., Rajčić, B.,& Stević, Z.. (2023). Importance of examination of collector for impurities after oil purification for human and environmental safety. in 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023
University of Banja Luka Faculty of Mechanical Engineering., 477-482.
https://hdl.handle.net/21.15107/rcub_machinery_7127

Jarić M, Petronić S, Budimir N, Rajčić B, Stević Z. Importance of examination of collector for impurities after oil purification for human and environmental safety. in 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023. 2023;:477-482.
https://hdl.handle.net/21.15107/rcub_machinery_7127 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Rajčić, Boris, Stević, Zoran, "Importance of examination of collector for impurities after oil purification for human and environmental safety" in 16th International Conference on Accomplishments in Mechanical and	Industrial Engineering DEMI 2023 (2023):477-482,
https://hdl.handle.net/21.15107/rcub_machinery_7127 .

TY  - CONF
AU  - Stolić, Predrag
AU  - Stanimirović, Zdravko
AU  - Stanimirović, Ivanka
AU  - Jarić, Marko
AU  - Radovanović, Ilija
AU  - Stević, Zoran
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7123
AB  - Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of
these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of
these problems can be overcome by using open source solutions on the example of one such laboratory for basic and
master academic studies in the mining engineering program, where students are given practical skills in of working
with sensors, process monitoring, and similar activities.
C3  - ISPC «Modern information and electronic technologies»
T1  - Application of open source solutions in the realization of low cost teaching laboratories
EP  - 39
SP  - 36
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7123
ER  - 

@conference{
author = "Stolić, Predrag and Stanimirović, Zdravko and Stanimirović, Ivanka and Jarić, Marko and Radovanović, Ilija and Stević, Zoran",
year = "2023",
abstract = "Teaching in engineering study programs includes practice that often takes place in laboratories. The implementation of
these laboratories is often accompanied by certain limitations and complexities. This paper will show how some of
these problems can be overcome by using open source solutions on the example of one such laboratory for basic and
master academic studies in the mining engineering program, where students are given practical skills in of working
with sensors, process monitoring, and similar activities.",
journal = "ISPC «Modern information and electronic technologies»",
title = "Application of open source solutions in the realization of low cost teaching laboratories",
pages = "39-36",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7123"
}

Stolić, P., Stanimirović, Z., Stanimirović, I., Jarić, M., Radovanović, I.,& Stević, Z.. (2023). Application of open source solutions in the realization of low cost teaching laboratories. in ISPC «Modern information and electronic technologies», 36-39.
https://hdl.handle.net/21.15107/rcub_machinery_7123

Stolić P, Stanimirović Z, Stanimirović I, Jarić M, Radovanović I, Stević Z. Application of open source solutions in the realization of low cost teaching laboratories. in ISPC «Modern information and electronic technologies». 2023;:36-39.
https://hdl.handle.net/21.15107/rcub_machinery_7123 .

Stolić, Predrag, Stanimirović, Zdravko, Stanimirović, Ivanka, Jarić, Marko, Radovanović, Ilija, Stević, Zoran, "Application of open source solutions in the realization of low cost teaching laboratories" in ISPC «Modern information and electronic technologies» (2023):36-39,
https://hdl.handle.net/21.15107/rcub_machinery_7123 .

TY  - CONF
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7120
AB  - Contemporary Museum Practice, which in the process of musealization of renewable energy,
emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given
the development of ideas on using this type of energy, the subject of research is The Collection of
Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the
methodological, scientific and educational aspects of this museum, with a comparative analysis of
the concept of Frances Young Tang Teaching Museum, we propose the possible development of the
museum as a real and virtual space to acquire formative experience in working with solar energy.
PB  - SMEITS
C3  - 10th International Conference on Renewable Electrical Power Sources
T1  - Contemporary musealization and collection of museum of solar energy
EP  - 76
SP  - 69
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7120
ER  - 

@conference{
author = "Polić, Suzana and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Contemporary Museum Practice, which in the process of musealization of renewable energy,
emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given
the development of ideas on using this type of energy, the subject of research is The Collection of
Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the
methodological, scientific and educational aspects of this museum, with a comparative analysis of
the concept of Frances Young Tang Teaching Museum, we propose the possible development of the
museum as a real and virtual space to acquire formative experience in working with solar energy.",
publisher = "SMEITS",
journal = "10th International Conference on Renewable Electrical Power Sources",
title = "Contemporary musealization and collection of museum of solar energy",
pages = "76-69",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7120"
}

Polić, S., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Contemporary musealization and collection of museum of solar energy. in 10th International Conference on Renewable Electrical Power Sources
SMEITS., 69-76.
https://hdl.handle.net/21.15107/rcub_machinery_7120

Polić S, Petronić S, Stević Z, Jarić M. Contemporary musealization and collection of museum of solar energy. in 10th International Conference on Renewable Electrical Power Sources. 2022;:69-76.
https://hdl.handle.net/21.15107/rcub_machinery_7120 .

Polić, Suzana, Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Contemporary musealization and collection of museum of solar energy" in 10th International Conference on Renewable Electrical Power Sources (2022):69-76,
https://hdl.handle.net/21.15107/rcub_machinery_7120 .

TY  - CONF
AU  - Polić, Suzana
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7122
AB  - Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy
transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the
contemporary circumstances of the using renewable sources of energy. Heritological dimension gives
focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a
heritological-philosophical idea present in modern academic practice.
AB  - Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i
moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti
primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne
u savremenoj akademskoj praksi.
C3  - 10th International Conference on Renewable Electrical Power Sources
T1  - Heritological-philosophical ideas in the research of the renewable energy sources implementation
EP  - 172
SP  - 165
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7122
ER  - 

@conference{
author = "Polić, Suzana and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy
transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the
contemporary circumstances of the using renewable sources of energy. Heritological dimension gives
focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a
heritological-philosophical idea present in modern academic practice., Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i
moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti
primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne
u savremenoj akademskoj praksi.",
journal = "10th International Conference on Renewable Electrical Power Sources",
title = "Heritological-philosophical ideas in the research of the renewable energy sources implementation",
pages = "172-165",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7122"
}

Polić, S., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Heritological-philosophical ideas in the research of the renewable energy sources implementation. in 10th International Conference on Renewable Electrical Power Sources, 165-172.
https://hdl.handle.net/21.15107/rcub_machinery_7122

Polić S, Petronić S, Stević Z, Jarić M. Heritological-philosophical ideas in the research of the renewable energy sources implementation. in 10th International Conference on Renewable Electrical Power Sources. 2022;:165-172.
https://hdl.handle.net/21.15107/rcub_machinery_7122 .

Polić, Suzana, Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Heritological-philosophical ideas in the research of the renewable energy sources implementation" in 10th International Conference on Renewable Electrical Power Sources (2022):165-172,
https://hdl.handle.net/21.15107/rcub_machinery_7122 .

Stević, Z., Šibalija, T., Petronić, S., Milovanović, D.,& Jarić, M.. (2021). Projektovanje parametara laserskog bušenja i sečenja superlegure nikla pomoću algoritma optimizacije rojem čestica. in Ministarsvo prosvete, nauke i tehnološkog razvoja
Ministarsvo prosvete, nauke i tehnološkog razvoja.(TP0110-033/2021).
https://hdl.handle.net/21.15107/rcub_machinery_7205

Stević Z, Šibalija T, Petronić S, Milovanović D, Jarić M. Projektovanje parametara laserskog bušenja i sečenja superlegure nikla pomoću algoritma optimizacije rojem čestica. in Ministarsvo prosvete, nauke i tehnološkog razvoja. 2021;(TP0110-033/2021).
https://hdl.handle.net/21.15107/rcub_machinery_7205 .

Stević, Zoran, Šibalija, Tatjana, Petronić, Sanja, Milovanović, Dubravka, Jarić, Marko, "Projektovanje parametara laserskog bušenja i sečenja superlegure nikla pomoću algoritma optimizacije rojem čestica" in Ministarsvo prosvete, nauke i tehnološkog razvoja, no. TP0110-033/2021 (2021),
https://hdl.handle.net/21.15107/rcub_machinery_7205 .

TY  - JOUR
AU  - Rajcić, Boris
AU  - Petronić, Sanja
AU  - Čolić, Katarina
AU  - Stević, Zoran
AU  - Petrović, Ana
AU  - Mišković, Žarko
AU  - Milovanović, Dubravka
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3500
AB  - Reliable and resilient constructions are basic for ensuring the safety of various structures. The superalloys are used as constructive materials due to their superb mechanical properties and endurance. However, even these materials can have certain areas where the stress concentration is higher than expected, such as drilling holes, which are common in various structures that need additional enhancement. Surface laser modifications of the areas surrounding the holes drilled in Nimonic 263 sheets are done by pulsed picosecond and nanosecond Nd:YAG laser irradiations with pulse durations of 170 ps and  lt = 8 ns, respectively. Following the laser surface treatment, the effectiveness of the enhancement was analyzed by the microhardness test and the deformation test. The results show that the deformation and stress values are decreased by 25-40 percent, showing the improvement in the resilience to deformation. The Vickers microhardness test results indicate an improvement in the Nimonic 263 microhardness. The dimensions of the microcracks are higher for the untreated material in comparison to the laser-treated material.
PB  - MDPI, Basel
T2  - Metals
T1  - Laser Processing of Ni-Based Superalloy Surfaces Susceptible to Stress Concentration
IS  - 5
VL  - 11
DO  - 10.3390/met11050750
ER  - 

@article{
author = "Rajcić, Boris and Petronić, Sanja and Čolić, Katarina and Stević, Zoran and Petrović, Ana and Mišković, Žarko and Milovanović, Dubravka",
year = "2021",
abstract = "Reliable and resilient constructions are basic for ensuring the safety of various structures. The superalloys are used as constructive materials due to their superb mechanical properties and endurance. However, even these materials can have certain areas where the stress concentration is higher than expected, such as drilling holes, which are common in various structures that need additional enhancement. Surface laser modifications of the areas surrounding the holes drilled in Nimonic 263 sheets are done by pulsed picosecond and nanosecond Nd:YAG laser irradiations with pulse durations of 170 ps and  lt = 8 ns, respectively. Following the laser surface treatment, the effectiveness of the enhancement was analyzed by the microhardness test and the deformation test. The results show that the deformation and stress values are decreased by 25-40 percent, showing the improvement in the resilience to deformation. The Vickers microhardness test results indicate an improvement in the Nimonic 263 microhardness. The dimensions of the microcracks are higher for the untreated material in comparison to the laser-treated material.",
publisher = "MDPI, Basel",
journal = "Metals",
title = "Laser Processing of Ni-Based Superalloy Surfaces Susceptible to Stress Concentration",
number = "5",
volume = "11",
doi = "10.3390/met11050750"
}

Rajcić, B., Petronić, S., Čolić, K., Stević, Z., Petrović, A., Mišković, Ž.,& Milovanović, D.. (2021). Laser Processing of Ni-Based Superalloy Surfaces Susceptible to Stress Concentration. in Metals
MDPI, Basel., 11(5).
https://doi.org/10.3390/met11050750

Rajcić B, Petronić S, Čolić K, Stević Z, Petrović A, Mišković Ž, Milovanović D. Laser Processing of Ni-Based Superalloy Surfaces Susceptible to Stress Concentration. in Metals. 2021;11(5).
doi:10.3390/met11050750 .

Rajcić, Boris, Petronić, Sanja, Čolić, Katarina, Stević, Zoran, Petrović, Ana, Mišković, Žarko, Milovanović, Dubravka, "Laser Processing of Ni-Based Superalloy Surfaces Susceptible to Stress Concentration" in Metals, 11, no. 5 (2021),
https://doi.org/10.3390/met11050750 . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Majstorović, Jelena
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7581
AB  - Mullite and zircon are widely used for different applications for refractory materials. In this paper their cavitation erosion resistance will be investigated. For synthesis of mullite samples, (3 Al2O3 · 2 SiO2) at the temperature 1200 ºC, the mixture of kaolin and alumina was used with presence of mineralizer1% NaF. Zircon samples used for experiment were pure zircon (wt %): 99.99 % ZrSiO4. Zircon was obtained by mechanical processing of refractory mineral raw materials-zircon sand, purification methods and milling. In this paper image analysis will be implemented for monitoring degradation level during testing, as well as number of formed pits during testing, and their characterization (average diameter and area). Ultrasonic measurements will be related to the determination of Dynamic Young modulus of elasticity. During the test ultrasonic velosities will be measured, and used as controlling factor for degradation level during cavitation erosion as well as strengths and weaknesses of the used methodology.
C3  - 3rd Metallurgical & Materials Engineering Congress of South-East Europe 2017, Book of Abstracts
T1  - Comparison of cavitation erosion resistance of mulite and zircon samples based on non destructive characterization
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7581
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Majstorović, Jelena and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2017",
abstract = "Mullite and zircon are widely used for different applications for refractory materials. In this paper their cavitation erosion resistance will be investigated. For synthesis of mullite samples, (3 Al2O3 · 2 SiO2) at the temperature 1200 ºC, the mixture of kaolin and alumina was used with presence of mineralizer1% NaF. Zircon samples used for experiment were pure zircon (wt %): 99.99 % ZrSiO4. Zircon was obtained by mechanical processing of refractory mineral raw materials-zircon sand, purification methods and milling. In this paper image analysis will be implemented for monitoring degradation level during testing, as well as number of formed pits during testing, and their characterization (average diameter and area). Ultrasonic measurements will be related to the determination of Dynamic Young modulus of elasticity. During the test ultrasonic velosities will be measured, and used as controlling factor for degradation level during cavitation erosion as well as strengths and weaknesses of the used methodology.",
journal = "3rd Metallurgical & Materials Engineering Congress of South-East Europe 2017, Book of Abstracts",
title = "Comparison of cavitation erosion resistance of mulite and zircon samples based on non destructive characterization",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7581"
}

Pavlović, M., Dojčinović, M., Majstorović, J., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2017). Comparison of cavitation erosion resistance of mulite and zircon samples based on non destructive characterization. in 3rd Metallurgical & Materials Engineering Congress of South-East Europe 2017, Book of Abstracts.
https://hdl.handle.net/21.15107/rcub_machinery_7581

Pavlović M, Dojčinović M, Majstorović J, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Comparison of cavitation erosion resistance of mulite and zircon samples based on non destructive characterization. in 3rd Metallurgical & Materials Engineering Congress of South-East Europe 2017, Book of Abstracts. 2017;.
https://hdl.handle.net/21.15107/rcub_machinery_7581 .

Pavlović, Marko, Dojčinović, Marina, Majstorović, Jelena, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Comparison of cavitation erosion resistance of mulite and zircon samples based on non destructive characterization" in 3rd Metallurgical & Materials Engineering Congress of South-East Europe 2017, Book of Abstracts (2017),
https://hdl.handle.net/21.15107/rcub_machinery_7581 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Majstorović, Jelena
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7561
AB  - Mulilte, and zircon are widely used for different applications for refractory materials.  In this paper their behavior in conditions of the cavitation erosion was investigated. Cavitation erosion testing was applied using standard  the ultrasonic vibratory cavitation set up  with stationary specimen. Weight loss as well as image analysis were used for comparison of the different samples to the effects of cavitation. In this paper image analysis was implemented for monitoring  degradation level during testing, as well as number of formed pits during testing, and their characterization (average diameter and area). Obtained results were discussed in order to compare and analyze resistance of the different materials (mullite and zircon) to the cavitation erosion, as well as used methodology.
C3  - 4th Conference of the Serbian Society for Ceramic Materials, June 14-16, 2017. Belgrade, 4CSCS-2017, Book of Abstracts
T1  - Implementation of image analysis on comparison of cavitation erosion 	degradation of mullite and zircon samples based
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7561
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Majstorović, Jelena and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2017",
abstract = "Mulilte, and zircon are widely used for different applications for refractory materials.  In this paper their behavior in conditions of the cavitation erosion was investigated. Cavitation erosion testing was applied using standard  the ultrasonic vibratory cavitation set up  with stationary specimen. Weight loss as well as image analysis were used for comparison of the different samples to the effects of cavitation. In this paper image analysis was implemented for monitoring  degradation level during testing, as well as number of formed pits during testing, and their characterization (average diameter and area). Obtained results were discussed in order to compare and analyze resistance of the different materials (mullite and zircon) to the cavitation erosion, as well as used methodology.",
journal = "4th Conference of the Serbian Society for Ceramic Materials, June 14-16, 2017. Belgrade, 4CSCS-2017, Book of Abstracts",
title = "Implementation of image analysis on comparison of cavitation erosion 	degradation of mullite and zircon samples based",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7561"
}

Pavlović, M., Dojčinović, M., Majstorović, J., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2017). Implementation of image analysis on comparison of cavitation erosion 	degradation of mullite and zircon samples based. in 4th Conference of the Serbian Society for Ceramic Materials, June 14-16, 2017. Belgrade, 4CSCS-2017, Book of Abstracts.
https://hdl.handle.net/21.15107/rcub_machinery_7561

Pavlović M, Dojčinović M, Majstorović J, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Implementation of image analysis on comparison of cavitation erosion 	degradation of mullite and zircon samples based. in 4th Conference of the Serbian Society for Ceramic Materials, June 14-16, 2017. Belgrade, 4CSCS-2017, Book of Abstracts. 2017;.
https://hdl.handle.net/21.15107/rcub_machinery_7561 .

Pavlović, Marko, Dojčinović, Marina, Majstorović, Jelena, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Implementation of image analysis on comparison of cavitation erosion 	degradation of mullite and zircon samples based" in 4th Conference of the Serbian Society for Ceramic Materials, June 14-16, 2017. Belgrade, 4CSCS-2017, Book of Abstracts (2017),
https://hdl.handle.net/21.15107/rcub_machinery_7561 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Martinović, Sanja
AU  - Dojčinović, Marina
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7559
AB  - This study is focused on monitoring the degradation level of zircon based ceramic materials during exposure to cavitation. In addition to conventional degradation monitoring methods, weight loss measuring, the emphasis is on monitoring the changes occurring at the surface of the sample by taking the photos and analyzing of these images. In this paper, several parameters are monitored by image analysis: the level of surface degradation, the number of pits and the average area of the pits. This method proved to be very fast and useful for a quantification of damage which could improve the prediction of the material lifetime.
C3  - 49th International October Conference on Mining and Metallurgy, 18-21 October 2017, Bor Lake, Proceedings
T1  - Damage level evaluation of zircon samples caused by cavitation erosion using 	image analysis
EP  - 597
SP  - 594
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7559
ER  - 

@conference{
author = "Pavlović, Marko and Martinović, Sanja and Dojčinović, Marina and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2017",
abstract = "This study is focused on monitoring the degradation level of zircon based ceramic materials during exposure to cavitation. In addition to conventional degradation monitoring methods, weight loss measuring, the emphasis is on monitoring the changes occurring at the surface of the sample by taking the photos and analyzing of these images. In this paper, several parameters are monitored by image analysis: the level of surface degradation, the number of pits and the average area of the pits. This method proved to be very fast and useful for a quantification of damage which could improve the prediction of the material lifetime.",
journal = "49th International October Conference on Mining and Metallurgy, 18-21 October 2017, Bor Lake, Proceedings",
title = "Damage level evaluation of zircon samples caused by cavitation erosion using 	image analysis",
pages = "597-594",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7559"
}

Pavlović, M., Martinović, S., Dojčinović, M., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2017). Damage level evaluation of zircon samples caused by cavitation erosion using 	image analysis. in 49th International October Conference on Mining and Metallurgy, 18-21 October 2017, Bor Lake, Proceedings, 594-597.
https://hdl.handle.net/21.15107/rcub_machinery_7559

Pavlović M, Martinović S, Dojčinović M, Vlahović M, Stević Z, Volkov-Husović T. Damage level evaluation of zircon samples caused by cavitation erosion using 	image analysis. in 49th International October Conference on Mining and Metallurgy, 18-21 October 2017, Bor Lake, Proceedings. 2017;:594-597.
https://hdl.handle.net/21.15107/rcub_machinery_7559 .

Pavlović, Marko, Martinović, Sanja, Dojčinović, Marina, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Damage level evaluation of zircon samples caused by cavitation erosion using 	image analysis" in 49th International October Conference on Mining and Metallurgy, 18-21 October 2017, Bor Lake, Proceedings (2017):594-597,
https://hdl.handle.net/21.15107/rcub_machinery_7559 .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Jovanović, Marina
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7442
AB  - Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation erosion testing. Mass loss was taken as a conventional criterion for material degradation, while the level of surface degradation was evaluated by image and thermal imaging analyses. Results show high cavitation resistance of zircon ceramics and their suitability when vigorous cavitation erosion environment is expected.
T2  - Science of Sintering
T1  - Determination of Degradation Level during 	Cavitation Erosion of Zircon 	Based Ceramic
VL  - 49
DO  - 10.2298/SOS1702175P
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Jovanović, Marina and Volkov-Husović, Tatjana",
year = "2017",
abstract = "Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation erosion testing. Mass loss was taken as a conventional criterion for material degradation, while the level of surface degradation was evaluated by image and thermal imaging analyses. Results show high cavitation resistance of zircon ceramics and their suitability when vigorous cavitation erosion environment is expected.",
journal = "Science of Sintering",
title = "Determination of Degradation Level during 	Cavitation Erosion of Zircon 	Based Ceramic",
volume = "49",
doi = "10.2298/SOS1702175P"
}

Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z., Jovanović, M.,& Volkov-Husović, T.. (2017). Determination of Degradation Level during 	Cavitation Erosion of Zircon 	Based Ceramic. in Science of Sintering, 49.
https://doi.org/10.2298/SOS1702175P

Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z, Jovanović M, Volkov-Husović T. Determination of Degradation Level during 	Cavitation Erosion of Zircon 	Based Ceramic. in Science of Sintering. 2017;49.
doi:10.2298/SOS1702175P .

Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Jovanović, Marina, Volkov-Husović, Tatjana, "Determination of Degradation Level during 	Cavitation Erosion of Zircon 	Based Ceramic" in Science of Sintering, 49 (2017),
https://doi.org/10.2298/SOS1702175P . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7475
AB  - The paper presents the results of testing the mullite ceramics in terms of cavitation erosion. Mullite samples were sintered at 1200ºC. To determine the cavitation resistance the ultrasonic vibration method with stationary specimen was used. Mass loss and level of degradation of surface samples   were monitored using the image analysis. Test results showed a high cavitation resistance of mullite ceramics and its possible application to various areas- metallurgy, mining, construction, chemical industry, where it is expected the presence of cavitation erosion.
C3  - 48th International October Conference on Mining and Metallurgy, Bor 2016, Proceedings
T1  - Cavitation damage of mullite ceramic: Implementation of image analysis
EP  - 244
SP  - 241
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7475
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2016",
abstract = "The paper presents the results of testing the mullite ceramics in terms of cavitation erosion. Mullite samples were sintered at 1200ºC. To determine the cavitation resistance the ultrasonic vibration method with stationary specimen was used. Mass loss and level of degradation of surface samples   were monitored using the image analysis. Test results showed a high cavitation resistance of mullite ceramics and its possible application to various areas- metallurgy, mining, construction, chemical industry, where it is expected the presence of cavitation erosion.",
journal = "48th International October Conference on Mining and Metallurgy, Bor 2016, Proceedings",
title = "Cavitation damage of mullite ceramic: Implementation of image analysis",
pages = "244-241",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7475"
}

Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2016). Cavitation damage of mullite ceramic: Implementation of image analysis. in 48th International October Conference on Mining and Metallurgy, Bor 2016, Proceedings, 241-244.
https://hdl.handle.net/21.15107/rcub_machinery_7475

Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Cavitation damage of mullite ceramic: Implementation of image analysis. in 48th International October Conference on Mining and Metallurgy, Bor 2016, Proceedings. 2016;:241-244.
https://hdl.handle.net/21.15107/rcub_machinery_7475 .

Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Cavitation damage of mullite ceramic: Implementation of image analysis" in 48th International October Conference on Mining and Metallurgy, Bor 2016, Proceedings (2016):241-244,
https://hdl.handle.net/21.15107/rcub_machinery_7475 .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7454
AB  - Coating materials are widely used in refractory lining to prevent different deleterious effects such are reactions on the mold-metal contact surface, abrasion from liquid metal or alloy, gasses, slags, and other materials in contact with the coating. In this paper, behavior of cordierite based coating exposed to the cavitation erosion was investigated. Cordierite samples sintered at 1200 and 1400 °C were used for the tests. Mass loss, level of surface degradation obtained using image analysis and thermal imaging analysis were applied for the cavitation erosion evaluation. Results showed that the cordierite samples can be successfully used in conditions where the cavitation resistance is required.
T2  - Composites Part B: Engineering
T1  - Non destructive monitoring of cavitation erosion of cordierite based coatings
EP  - 91
SP  - 84
VL  - 97
DO  - 10.1016/j.compositesb.2016.04.073
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2016",
abstract = "Coating materials are widely used in refractory lining to prevent different deleterious effects such are reactions on the mold-metal contact surface, abrasion from liquid metal or alloy, gasses, slags, and other materials in contact with the coating. In this paper, behavior of cordierite based coating exposed to the cavitation erosion was investigated. Cordierite samples sintered at 1200 and 1400 °C were used for the tests. Mass loss, level of surface degradation obtained using image analysis and thermal imaging analysis were applied for the cavitation erosion evaluation. Results showed that the cordierite samples can be successfully used in conditions where the cavitation resistance is required.",
journal = "Composites Part B: Engineering",
title = "Non destructive monitoring of cavitation erosion of cordierite based coatings",
pages = "91-84",
volume = "97",
doi = "10.1016/j.compositesb.2016.04.073"
}

Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2016). Non destructive monitoring of cavitation erosion of cordierite based coatings. in Composites Part B: Engineering, 97, 84-91.
https://doi.org/10.1016/j.compositesb.2016.04.073

Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Non destructive monitoring of cavitation erosion of cordierite based coatings. in Composites Part B: Engineering. 2016;97:84-91.
doi:10.1016/j.compositesb.2016.04.073 .

Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Non destructive monitoring of cavitation erosion of cordierite based coatings" in Composites Part B: Engineering, 97 (2016):84-91,
https://doi.org/10.1016/j.compositesb.2016.04.073 . .