TY  - CONF
AU  - Mitrović, Radivoje
AU  - Mišković, Žarko
AU  - Ristivojević, Mileta
AU  - Dimić, Aleksandar
AU  - Danko, Jan
AU  - Bucha, Jozef
AU  - Rackov, M.
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2975
AB  - Nowadays, rapid prototyping technologies are available at very affordable prices. This is the main reason why they are being used in almost all industry sectors. 3D printers are currently being widely used for rapid prototyping and development of the new products. However, taking into account the permanent progress of rapid prototyping materials mechanical characteristics (usually different kinds of plastics), 3D printers are sometimes used even for production of the failed parts replacements - operating at the low load and rotational speed conditions. This is the main goal of this paper - to establish optimal 3D printing parameters (printing direction, layer height and percent of infill) which will allow printed gears to replace failed steel gears, for at least some time, enough for spare steel gears to be produced and delivered on site. Taking into account previously mentioned facts, the application of the 3D printed gears can potentially provide the reduction of maintenance delays in different industrial facilities (factories, workshops, etc.) which will consequently lead to significant energy and financial savings.
PB  - Institute of Physics Publishing
C3  - IOP Conference Series: Materials Science and Engineering
T1  - Determination of optimal parameters for rapid prototyping of the involute gears
IS  - 1
VL  - 393
DO  - 10.1088/1757-899X/393/1/012105
ER  - 

@conference{
author = "Mitrović, Radivoje and Mišković, Žarko and Ristivojević, Mileta and Dimić, Aleksandar and Danko, Jan and Bucha, Jozef and Rackov, M.",
year = "2018",
abstract = "Nowadays, rapid prototyping technologies are available at very affordable prices. This is the main reason why they are being used in almost all industry sectors. 3D printers are currently being widely used for rapid prototyping and development of the new products. However, taking into account the permanent progress of rapid prototyping materials mechanical characteristics (usually different kinds of plastics), 3D printers are sometimes used even for production of the failed parts replacements - operating at the low load and rotational speed conditions. This is the main goal of this paper - to establish optimal 3D printing parameters (printing direction, layer height and percent of infill) which will allow printed gears to replace failed steel gears, for at least some time, enough for spare steel gears to be produced and delivered on site. Taking into account previously mentioned facts, the application of the 3D printed gears can potentially provide the reduction of maintenance delays in different industrial facilities (factories, workshops, etc.) which will consequently lead to significant energy and financial savings.",
publisher = "Institute of Physics Publishing",
journal = "IOP Conference Series: Materials Science and Engineering",
title = "Determination of optimal parameters for rapid prototyping of the involute gears",
number = "1",
volume = "393",
doi = "10.1088/1757-899X/393/1/012105"
}

Mitrović, R., Mišković, Ž., Ristivojević, M., Dimić, A., Danko, J., Bucha, J.,& Rackov, M.. (2018). Determination of optimal parameters for rapid prototyping of the involute gears. in IOP Conference Series: Materials Science and Engineering
Institute of Physics Publishing., 393(1).
https://doi.org/10.1088/1757-899X/393/1/012105

Mitrović R, Mišković Ž, Ristivojević M, Dimić A, Danko J, Bucha J, Rackov M. Determination of optimal parameters for rapid prototyping of the involute gears. in IOP Conference Series: Materials Science and Engineering. 2018;393(1).
doi:10.1088/1757-899X/393/1/012105 .

Mitrović, Radivoje, Mišković, Žarko, Ristivojević, Mileta, Dimić, Aleksandar, Danko, Jan, Bucha, Jozef, Rackov, M., "Determination of optimal parameters for rapid prototyping of the involute gears" in IOP Conference Series: Materials Science and Engineering, 393, no. 1 (2018),
https://doi.org/10.1088/1757-899X/393/1/012105 . .

TY  - JOUR
AU  - Rackov, M.
AU  - Mitrović, Radivoje
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2977
PB  - Institute of Physics Publishing
T2  - IOP Conference Series: Materials Science and Engineering
T1  - The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018)
IS  - 1
VL  - 393
DO  - 10.1088/1757-899X/393/1/011001
ER  - 

@article{
author = "Rackov, M. and Mitrović, Radivoje",
year = "2018",
publisher = "Institute of Physics Publishing",
journal = "IOP Conference Series: Materials Science and Engineering",
title = "The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018)",
number = "1",
volume = "393",
doi = "10.1088/1757-899X/393/1/011001"
}

Rackov, M.,& Mitrović, R.. (2018). The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018). in IOP Conference Series: Materials Science and Engineering
Institute of Physics Publishing., 393(1).
https://doi.org/10.1088/1757-899X/393/1/011001

Rackov M, Mitrović R. The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018). in IOP Conference Series: Materials Science and Engineering. 2018;393(1).
doi:10.1088/1757-899X/393/1/011001 .

Rackov, M., Mitrović, Radivoje, "The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018)" in IOP Conference Series: Materials Science and Engineering, 393, no. 1 (2018),
https://doi.org/10.1088/1757-899X/393/1/011001 . .

TY  - CONF
AU  - Kuzmanović, Siniša
AU  - Mitrović, Radivoje
AU  - Rackov, M.
AU  - Miltenović, Đorđe
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1735
AB  - This paper deals with the issues of evaluation and choice of conceptual solution for a universal motor gear reducer, usually carried out during its development. It is a known fact that reducers could be delivered with a motor installed or in the so-called motorless version. In case of the delivery version with the motor, they could be equipped either with special reducer electric motors or with standard (IEC) motors. In case of a reducer intended for the special motor, in motorless version it has to be equipped with IEC motor adapter, for the customer’s option to use standard motors, plus it should have a classic input shaft. In case of a reducer delivered with IEC motor, its motor might be connected indirectly, using IEC motor adaptor, or directly onto the reducer, without the use of adaptor. In both cases the reducer has to be delivered with a classic input shaft. This paper conducts the evaluation of some particular solutions by leading reducer manufacturers, with the intention to point out the most satisfactory conceptual solution.
PB  - Springer Netherlands
C3  - Mechanisms and Machine Science
T1  - Evaluation and choice of conceptual solutions for a universal geared engine reducer
EP  - 477
SP  - 467
VL  - 13
DO  - 10.1007/978-94-007-6558-0_37
ER  - 

@conference{
author = "Kuzmanović, Siniša and Mitrović, Radivoje and Rackov, M. and Miltenović, Đorđe",
year = "2013",
abstract = "This paper deals with the issues of evaluation and choice of conceptual solution for a universal motor gear reducer, usually carried out during its development. It is a known fact that reducers could be delivered with a motor installed or in the so-called motorless version. In case of the delivery version with the motor, they could be equipped either with special reducer electric motors or with standard (IEC) motors. In case of a reducer intended for the special motor, in motorless version it has to be equipped with IEC motor adapter, for the customer’s option to use standard motors, plus it should have a classic input shaft. In case of a reducer delivered with IEC motor, its motor might be connected indirectly, using IEC motor adaptor, or directly onto the reducer, without the use of adaptor. In both cases the reducer has to be delivered with a classic input shaft. This paper conducts the evaluation of some particular solutions by leading reducer manufacturers, with the intention to point out the most satisfactory conceptual solution.",
publisher = "Springer Netherlands",
journal = "Mechanisms and Machine Science",
title = "Evaluation and choice of conceptual solutions for a universal geared engine reducer",
pages = "477-467",
volume = "13",
doi = "10.1007/978-94-007-6558-0_37"
}

Kuzmanović, S., Mitrović, R., Rackov, M.,& Miltenović, Đ.. (2013). Evaluation and choice of conceptual solutions for a universal geared engine reducer. in Mechanisms and Machine Science
Springer Netherlands., 13, 467-477.
https://doi.org/10.1007/978-94-007-6558-0_37

Kuzmanović S, Mitrović R, Rackov M, Miltenović Đ. Evaluation and choice of conceptual solutions for a universal geared engine reducer. in Mechanisms and Machine Science. 2013;13:467-477.
doi:10.1007/978-94-007-6558-0_37 .

Kuzmanović, Siniša, Mitrović, Radivoje, Rackov, M., Miltenović, Đorđe, "Evaluation and choice of conceptual solutions for a universal geared engine reducer" in Mechanisms and Machine Science, 13 (2013):467-477,
https://doi.org/10.1007/978-94-007-6558-0_37 . .