TY  - CONF
AU  - Jerman, Boris
AU  - Hladnik, Jurij
AU  - Gašić, Vlada
AU  - Đorđević, Miloš
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4522
AB  - Truck mounted hydraulic cranes are widely used in the timber and in the waste disposal industry. They have a specific design, where dead weight, size in the folded position and the position of the gripper in the folded position are of particularly importance. Functionality of the crane is therefore expressed with load handling capabilities and also with the functionality during road transportation of the payload, when the crane is in the folded position on the truck. For handling
of heavier loads, nowadays mainly two types of cranes are used - the K cranes and the Z cranes. The main advantage of the K cranes is higher load capacity in comparison with the Z cranes when cranes of approximately the same weight are compared. On the other hand the main advantage of the Z cranes is their capability of folding in position, transvers to truck length. In the paper the kinematics of the mechanisms of the characteristic size K and Z cranes are analysed and mutually compared. The main accent is on the discussion about their load capacity.
PB  - Kraljevo : Faculty of Mechanical and Civil Engineering
C3  - Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”
T1  - Kinematics of the Truck Mounted Hydraulic Cranes
EP  - A150
SP  - A145
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4522
ER  - 

@conference{
author = "Jerman, Boris and Hladnik, Jurij and Gašić, Vlada and Đorđević, Miloš",
year = "2014",
abstract = "Truck mounted hydraulic cranes are widely used in the timber and in the waste disposal industry. They have a specific design, where dead weight, size in the folded position and the position of the gripper in the folded position are of particularly importance. Functionality of the crane is therefore expressed with load handling capabilities and also with the functionality during road transportation of the payload, when the crane is in the folded position on the truck. For handling
of heavier loads, nowadays mainly two types of cranes are used - the K cranes and the Z cranes. The main advantage of the K cranes is higher load capacity in comparison with the Z cranes when cranes of approximately the same weight are compared. On the other hand the main advantage of the Z cranes is their capability of folding in position, transvers to truck length. In the paper the kinematics of the mechanisms of the characteristic size K and Z cranes are analysed and mutually compared. The main accent is on the discussion about their load capacity.",
publisher = "Kraljevo : Faculty of Mechanical and Civil Engineering",
journal = "Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”",
title = "Kinematics of the Truck Mounted Hydraulic Cranes",
pages = "A150-A145",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4522"
}

Jerman, B., Hladnik, J., Gašić, V.,& Đorđević, M.. (2014). Kinematics of the Truck Mounted Hydraulic Cranes. in Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”
Kraljevo : Faculty of Mechanical and Civil Engineering., A145-A150.
https://hdl.handle.net/21.15107/rcub_machinery_4522

Jerman B, Hladnik J, Gašić V, Đorđević M. Kinematics of the Truck Mounted Hydraulic Cranes. in Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”. 2014;:A145-A150.
https://hdl.handle.net/21.15107/rcub_machinery_4522 .

Jerman, Boris, Hladnik, Jurij, Gašić, Vlada, Đorđević, Miloš, "Kinematics of the Truck Mounted Hydraulic Cranes" in Proceedings of VIII International Conference ”Heavy Machinery - HM 2014” (2014):A145-A150,
https://hdl.handle.net/21.15107/rcub_machinery_4522 .

TY  - CONF
AU  - Đorđević, Miloš
AU  - Batina, Darko
AU  - Zrnić, Nenad
AU  - Jerman, Boris
AU  - Hladnik, Jurij
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4781
AB  - This paper describes current status of modeling energy usage patterns for
PCs, provides insight in their energy consumption, energy costs and CO2
emission. It also provides possible solutions for improving energy
efficiency and energy savings. The study involved analysis of two different
mode settings (High Performance and Power Saver mode) of same
computer and gaming test case study. Usage patterns for both modes were
modeled based on Intel®'s EEP methodology. Workload was simulated
with StressMyPC freeware software. PC energy consumption while
executing workload was measured with Trotec® BX11 measuring device
during 15 days testing period, 8 hours a day. Computer and monitor were
separately observed.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of the XX International Conference MHCL’12
T1  - Modeling energy usage patterns of a PC and ways of improving it's energy efficiency
EP  - 324
SP  - 319
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4781
ER  - 

@conference{
author = "Đorđević, Miloš and Batina, Darko and Zrnić, Nenad and Jerman, Boris and Hladnik, Jurij",
year = "2012",
abstract = "This paper describes current status of modeling energy usage patterns for
PCs, provides insight in their energy consumption, energy costs and CO2
emission. It also provides possible solutions for improving energy
efficiency and energy savings. The study involved analysis of two different
mode settings (High Performance and Power Saver mode) of same
computer and gaming test case study. Usage patterns for both modes were
modeled based on Intel®'s EEP methodology. Workload was simulated
with StressMyPC freeware software. PC energy consumption while
executing workload was measured with Trotec® BX11 measuring device
during 15 days testing period, 8 hours a day. Computer and monitor were
separately observed.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of the XX International Conference MHCL’12",
title = "Modeling energy usage patterns of a PC and ways of improving it's energy efficiency",
pages = "324-319",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4781"
}

Đorđević, M., Batina, D., Zrnić, N., Jerman, B.,& Hladnik, J.. (2012). Modeling energy usage patterns of a PC and ways of improving it's energy efficiency. in Proceedings of the XX International Conference MHCL’12
University of Belgrade, Faculty of Mechanical Engineering., 319-324.
https://hdl.handle.net/21.15107/rcub_machinery_4781

Đorđević M, Batina D, Zrnić N, Jerman B, Hladnik J. Modeling energy usage patterns of a PC and ways of improving it's energy efficiency. in Proceedings of the XX International Conference MHCL’12. 2012;:319-324.
https://hdl.handle.net/21.15107/rcub_machinery_4781 .

Đorđević, Miloš, Batina, Darko, Zrnić, Nenad, Jerman, Boris, Hladnik, Jurij, "Modeling energy usage patterns of a PC and ways of improving it's energy efficiency" in Proceedings of the XX International Conference MHCL’12 (2012):319-324,
https://hdl.handle.net/21.15107/rcub_machinery_4781 .