TY  - JOUR
AU  - Cuk, Metod
AU  - Kosel, Franc
AU  - Zrnić, Nenad
AU  - Jerman, Boris
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2643
AB  - Structural sandwich panels made of two thin steel facings that are bonded to a thick mineral wool core are often used as roofing material. This paper explores an application of numerical simulations in the investigation of structural behaviour of long span, continuous roof sandwich panels with profiled faces. Because of the required higher load-bearing capacity and strict deflection limitations, roof sandwich panels usually have one of the cover faces strongly profiled. A finite element analysis and an experimental study of a long span sandwich panel (with an inner strongly profiled and a flat outer face) in two-span configuration with transverse loading were conducted with a special attention given to the failure modes and bearing capacity prediction. The results obtained from the experiment confirmed the finite element analysis results.
PB  - Assoc Mechanical Engineers Technicians Slovenia, Ljubljana
T2  - Strojniski Vestnik-Journal of Mechanical Engineering
T1  - An Analysis of Continuous Sandwich Panels with Profiled Faces
EP  - 753
IS  - 12
SP  - 746
VL  - 63
DO  - 10.5545/sv-jme.2017.4844
ER  - 

@article{
author = "Cuk, Metod and Kosel, Franc and Zrnić, Nenad and Jerman, Boris",
year = "2017",
abstract = "Structural sandwich panels made of two thin steel facings that are bonded to a thick mineral wool core are often used as roofing material. This paper explores an application of numerical simulations in the investigation of structural behaviour of long span, continuous roof sandwich panels with profiled faces. Because of the required higher load-bearing capacity and strict deflection limitations, roof sandwich panels usually have one of the cover faces strongly profiled. A finite element analysis and an experimental study of a long span sandwich panel (with an inner strongly profiled and a flat outer face) in two-span configuration with transverse loading were conducted with a special attention given to the failure modes and bearing capacity prediction. The results obtained from the experiment confirmed the finite element analysis results.",
publisher = "Assoc Mechanical Engineers Technicians Slovenia, Ljubljana",
journal = "Strojniski Vestnik-Journal of Mechanical Engineering",
title = "An Analysis of Continuous Sandwich Panels with Profiled Faces",
pages = "753-746",
number = "12",
volume = "63",
doi = "10.5545/sv-jme.2017.4844"
}

Cuk, M., Kosel, F., Zrnić, N.,& Jerman, B.. (2017). An Analysis of Continuous Sandwich Panels with Profiled Faces. in Strojniski Vestnik-Journal of Mechanical Engineering
Assoc Mechanical Engineers Technicians Slovenia, Ljubljana., 63(12), 746-753.
https://doi.org/10.5545/sv-jme.2017.4844

Cuk M, Kosel F, Zrnić N, Jerman B. An Analysis of Continuous Sandwich Panels with Profiled Faces. in Strojniski Vestnik-Journal of Mechanical Engineering. 2017;63(12):746-753.
doi:10.5545/sv-jme.2017.4844 .

Cuk, Metod, Kosel, Franc, Zrnić, Nenad, Jerman, Boris, "An Analysis of Continuous Sandwich Panels with Profiled Faces" in Strojniski Vestnik-Journal of Mechanical Engineering, 63, no. 12 (2017):746-753,
https://doi.org/10.5545/sv-jme.2017.4844 . .

TY  - JOUR
AU  - Jerman, Boris
AU  - Zrnić, Nenad
AU  - Jenko, Matjaz
AU  - Lerher, Tone
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2581
AB  - Fully automated electrically powered stacker cranes are the most common transportation devices used in automated high bay warehouses. When high throughputs are attained, the amount of the electric energy used is high. Taking this into account, together with relatively high rack configuration the energy saving by employing the regeneration of potential energy during the lowering of the stored goods seems to be a promising choice. In the paper real life data for deployment of four stacker cranes in high bay warehouse of bigger dairy is introduced and analysed. The cranes' working cycles are determined and their energy consumption is estimated. Finally, the probable energy and costs savings are determined taking into account the regenerated energy for crane operations and lower energy consumption for refrigeration purposes.
PB  - Univ Osijek, Tech Fac, Slavonski Brod
T2  - Tehnički vjesnik
T1  - Energy regeneration in automated high bay warehouse with stacker cranes
EP  - 1416
IS  - 5
SP  - 1411
VL  - 24
DO  - 10.17559/TV-20161219112306
ER  - 

@article{
author = "Jerman, Boris and Zrnić, Nenad and Jenko, Matjaz and Lerher, Tone",
year = "2017",
abstract = "Fully automated electrically powered stacker cranes are the most common transportation devices used in automated high bay warehouses. When high throughputs are attained, the amount of the electric energy used is high. Taking this into account, together with relatively high rack configuration the energy saving by employing the regeneration of potential energy during the lowering of the stored goods seems to be a promising choice. In the paper real life data for deployment of four stacker cranes in high bay warehouse of bigger dairy is introduced and analysed. The cranes' working cycles are determined and their energy consumption is estimated. Finally, the probable energy and costs savings are determined taking into account the regenerated energy for crane operations and lower energy consumption for refrigeration purposes.",
publisher = "Univ Osijek, Tech Fac, Slavonski Brod",
journal = "Tehnički vjesnik",
title = "Energy regeneration in automated high bay warehouse with stacker cranes",
pages = "1416-1411",
number = "5",
volume = "24",
doi = "10.17559/TV-20161219112306"
}

Jerman, B., Zrnić, N., Jenko, M.,& Lerher, T.. (2017). Energy regeneration in automated high bay warehouse with stacker cranes. in Tehnički vjesnik
Univ Osijek, Tech Fac, Slavonski Brod., 24(5), 1411-1416.
https://doi.org/10.17559/TV-20161219112306

Jerman B, Zrnić N, Jenko M, Lerher T. Energy regeneration in automated high bay warehouse with stacker cranes. in Tehnički vjesnik. 2017;24(5):1411-1416.
doi:10.17559/TV-20161219112306 .

Jerman, Boris, Zrnić, Nenad, Jenko, Matjaz, Lerher, Tone, "Energy regeneration in automated high bay warehouse with stacker cranes" in Tehnički vjesnik, 24, no. 5 (2017):1411-1416,
https://doi.org/10.17559/TV-20161219112306 . .

TY  - CONF
AU  - Lerher, Tone
AU  - Strmčnik, V.
AU  - Potrč, I.
AU  - Šraml, M.
AU  - Jerman, Boris
AU  - Zrnić, Nenad
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2403
AB  - Order picking is the process of retrieving items from the warehouse in response to a specific customer request. The design of an order picking system is often complicated and complex due to a large spectrum of external and internal factors, which influence the design choices. The most common objective of order picking systems during the design phase is to maximize the service level subject to reduce constraints such as labour, machines and capital. Therefore, the main objective of our paper is to present different policies for routing order pickers in one-block warehouse. Regarding the proposed routing policies, the effects on the order picking system performance will be presented.
PB  - AGH University of Science and Technology
C3  - 13th International Conference on Industrial Logistics, ICIL 2016 - Conference Proceedings
T1  - Simulation-based performance analysis of order picking systems
EP  - 155
SP  - 144
UR  - https://hdl.handle.net/21.15107/rcub_machinery_2403
ER  - 

@conference{
author = "Lerher, Tone and Strmčnik, V. and Potrč, I. and Šraml, M. and Jerman, Boris and Zrnić, Nenad",
year = "2016",
abstract = "Order picking is the process of retrieving items from the warehouse in response to a specific customer request. The design of an order picking system is often complicated and complex due to a large spectrum of external and internal factors, which influence the design choices. The most common objective of order picking systems during the design phase is to maximize the service level subject to reduce constraints such as labour, machines and capital. Therefore, the main objective of our paper is to present different policies for routing order pickers in one-block warehouse. Regarding the proposed routing policies, the effects on the order picking system performance will be presented.",
publisher = "AGH University of Science and Technology",
journal = "13th International Conference on Industrial Logistics, ICIL 2016 - Conference Proceedings",
title = "Simulation-based performance analysis of order picking systems",
pages = "155-144",
url = "https://hdl.handle.net/21.15107/rcub_machinery_2403"
}

Lerher, T., Strmčnik, V., Potrč, I., Šraml, M., Jerman, B.,& Zrnić, N.. (2016). Simulation-based performance analysis of order picking systems. in 13th International Conference on Industrial Logistics, ICIL 2016 - Conference Proceedings
AGH University of Science and Technology., 144-155.
https://hdl.handle.net/21.15107/rcub_machinery_2403

Lerher T, Strmčnik V, Potrč I, Šraml M, Jerman B, Zrnić N. Simulation-based performance analysis of order picking systems. in 13th International Conference on Industrial Logistics, ICIL 2016 - Conference Proceedings. 2016;:144-155.
https://hdl.handle.net/21.15107/rcub_machinery_2403 .

Lerher, Tone, Strmčnik, V., Potrč, I., Šraml, M., Jerman, Boris, Zrnić, Nenad, "Simulation-based performance analysis of order picking systems" in 13th International Conference on Industrial Logistics, ICIL 2016 - Conference Proceedings (2016):144-155,
https://hdl.handle.net/21.15107/rcub_machinery_2403 .

TY  - CONF
AU  - Đorđević, Miloš
AU  - Zrnić, Nenad
AU  - Jerman, Boris
PY  - 2015
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4792
AB  - This paper presents simplified life cycle assessment (LCA) of a bucket
wheel excavator (BWE) belt conveyor. Conducted analysis should provide
insight in most of the issues concerning sustainability and environmental
properties of the belt conveyor. This paper also provides recommendations
for improvement of the belt conveyor based on previous studies and
sumarized results based on analysis of complete conveyor presented here.
It should also serve as a starting point for complete LCA of the belt
conveyor. The aim of complete LCA is to provide more detailed review of
environmental properties of the belt conveyor and possible improvements
of its energy efficiency, energy and cost savings. All of these analysis
should serve as a basis for establishing methodology for LCA studies of
any BWE or similar types of belt conveyors.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of the 21st International Conference on Material Handling Constructions and Logistics MHCL 2015
T1  - Simplified Life Cycle Assessment of a Belt Conveyor
EP  - 206
SP  - 199
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4792
ER  - 

@conference{
author = "Đorđević, Miloš and Zrnić, Nenad and Jerman, Boris",
year = "2015",
abstract = "This paper presents simplified life cycle assessment (LCA) of a bucket
wheel excavator (BWE) belt conveyor. Conducted analysis should provide
insight in most of the issues concerning sustainability and environmental
properties of the belt conveyor. This paper also provides recommendations
for improvement of the belt conveyor based on previous studies and
sumarized results based on analysis of complete conveyor presented here.
It should also serve as a starting point for complete LCA of the belt
conveyor. The aim of complete LCA is to provide more detailed review of
environmental properties of the belt conveyor and possible improvements
of its energy efficiency, energy and cost savings. All of these analysis
should serve as a basis for establishing methodology for LCA studies of
any BWE or similar types of belt conveyors.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of the 21st International Conference on Material Handling Constructions and Logistics MHCL 2015",
title = "Simplified Life Cycle Assessment of a Belt Conveyor",
pages = "206-199",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4792"
}

Đorđević, M., Zrnić, N.,& Jerman, B.. (2015). Simplified Life Cycle Assessment of a Belt Conveyor. in Proceedings of the 21st International Conference on Material Handling Constructions and Logistics MHCL 2015
University of Belgrade, Faculty of Mechanical Engineering., 199-206.
https://hdl.handle.net/21.15107/rcub_machinery_4792

Đorđević M, Zrnić N, Jerman B. Simplified Life Cycle Assessment of a Belt Conveyor. in Proceedings of the 21st International Conference on Material Handling Constructions and Logistics MHCL 2015. 2015;:199-206.
https://hdl.handle.net/21.15107/rcub_machinery_4792 .

Đorđević, Miloš, Zrnić, Nenad, Jerman, Boris, "Simplified Life Cycle Assessment of a Belt Conveyor" in Proceedings of the 21st International Conference on Material Handling Constructions and Logistics MHCL 2015 (2015):199-206,
https://hdl.handle.net/21.15107/rcub_machinery_4792 .

TY  - CONF
AU  - Jerman, Boris
AU  - Hladnik, Jurij
AU  - Gašić, Vlada
AU  - Đorđević, Miloš
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4522
AB  - Truck mounted hydraulic cranes are widely used in the timber and in the waste disposal industry. They have a specific design, where dead weight, size in the folded position and the position of the gripper in the folded position are of particularly importance. Functionality of the crane is therefore expressed with load handling capabilities and also with the functionality during road transportation of the payload, when the crane is in the folded position on the truck. For handling
of heavier loads, nowadays mainly two types of cranes are used - the K cranes and the Z cranes. The main advantage of the K cranes is higher load capacity in comparison with the Z cranes when cranes of approximately the same weight are compared. On the other hand the main advantage of the Z cranes is their capability of folding in position, transvers to truck length. In the paper the kinematics of the mechanisms of the characteristic size K and Z cranes are analysed and mutually compared. The main accent is on the discussion about their load capacity.
PB  - Kraljevo : Faculty of Mechanical and Civil Engineering
C3  - Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”
T1  - Kinematics of the Truck Mounted Hydraulic Cranes
EP  - A150
SP  - A145
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4522
ER  - 

@conference{
author = "Jerman, Boris and Hladnik, Jurij and Gašić, Vlada and Đorđević, Miloš",
year = "2014",
abstract = "Truck mounted hydraulic cranes are widely used in the timber and in the waste disposal industry. They have a specific design, where dead weight, size in the folded position and the position of the gripper in the folded position are of particularly importance. Functionality of the crane is therefore expressed with load handling capabilities and also with the functionality during road transportation of the payload, when the crane is in the folded position on the truck. For handling
of heavier loads, nowadays mainly two types of cranes are used - the K cranes and the Z cranes. The main advantage of the K cranes is higher load capacity in comparison with the Z cranes when cranes of approximately the same weight are compared. On the other hand the main advantage of the Z cranes is their capability of folding in position, transvers to truck length. In the paper the kinematics of the mechanisms of the characteristic size K and Z cranes are analysed and mutually compared. The main accent is on the discussion about their load capacity.",
publisher = "Kraljevo : Faculty of Mechanical and Civil Engineering",
journal = "Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”",
title = "Kinematics of the Truck Mounted Hydraulic Cranes",
pages = "A150-A145",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4522"
}

Jerman, B., Hladnik, J., Gašić, V.,& Đorđević, M.. (2014). Kinematics of the Truck Mounted Hydraulic Cranes. in Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”
Kraljevo : Faculty of Mechanical and Civil Engineering., A145-A150.
https://hdl.handle.net/21.15107/rcub_machinery_4522

Jerman B, Hladnik J, Gašić V, Đorđević M. Kinematics of the Truck Mounted Hydraulic Cranes. in Proceedings of VIII International Conference ”Heavy Machinery - HM 2014”. 2014;:A145-A150.
https://hdl.handle.net/21.15107/rcub_machinery_4522 .

Jerman, Boris, Hladnik, Jurij, Gašić, Vlada, Đorđević, Miloš, "Kinematics of the Truck Mounted Hydraulic Cranes" in Proceedings of VIII International Conference ”Heavy Machinery - HM 2014” (2014):A145-A150,
https://hdl.handle.net/21.15107/rcub_machinery_4522 .

TY  - CONF
AU  - Đorđević, Miloš
AU  - Zrnić, Nenad
AU  - Jerman, Boris
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4791
AB  - This paper is the last in a series of papers which are dealing with partial life cycle assessment (LCA) of a bucket wheel excavator (BWE) belt conveyor components. The electric motor (EM) is the only component of a belt conveyor that consumes electric energy. Simplified LCA was conducted with the Ecodesign Assistant (EA) and the Ecodesign PILOT (EP) software tools. The EM was recognized as D type product, which is "use intensive" product. Analysis with the EP considers suggested strategies for improvement of the product with the emphasis on the electric energy efficiency improvement.
PB  - Vrnjaĉka Banja :  SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd
C3  - Proceedings of the 14th International Conference Research and Development in Mechanical Industry RaDMI 2014
T1  - SIMPLIFIED LIFE CYCLE ASSESSMENT OF A BELT CONVEYOR ELECTRIC MOTOR
EP  - 678
SP  - 671
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4791
ER  - 

@conference{
author = "Đorđević, Miloš and Zrnić, Nenad and Jerman, Boris",
year = "2014",
abstract = "This paper is the last in a series of papers which are dealing with partial life cycle assessment (LCA) of a bucket wheel excavator (BWE) belt conveyor components. The electric motor (EM) is the only component of a belt conveyor that consumes electric energy. Simplified LCA was conducted with the Ecodesign Assistant (EA) and the Ecodesign PILOT (EP) software tools. The EM was recognized as D type product, which is "use intensive" product. Analysis with the EP considers suggested strategies for improvement of the product with the emphasis on the electric energy efficiency improvement.",
publisher = "Vrnjaĉka Banja :  SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd",
journal = "Proceedings of the 14th International Conference Research and Development in Mechanical Industry RaDMI 2014",
title = "SIMPLIFIED LIFE CYCLE ASSESSMENT OF A BELT CONVEYOR ELECTRIC MOTOR",
pages = "678-671",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4791"
}

Đorđević, M., Zrnić, N.,& Jerman, B.. (2014). SIMPLIFIED LIFE CYCLE ASSESSMENT OF A BELT CONVEYOR ELECTRIC MOTOR. in Proceedings of the 14th International Conference Research and Development in Mechanical Industry RaDMI 2014
Vrnjaĉka Banja :  SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd., 671-678.
https://hdl.handle.net/21.15107/rcub_machinery_4791

Đorđević M, Zrnić N, Jerman B. SIMPLIFIED LIFE CYCLE ASSESSMENT OF A BELT CONVEYOR ELECTRIC MOTOR. in Proceedings of the 14th International Conference Research and Development in Mechanical Industry RaDMI 2014. 2014;:671-678.
https://hdl.handle.net/21.15107/rcub_machinery_4791 .

Đorđević, Miloš, Zrnić, Nenad, Jerman, Boris, "SIMPLIFIED LIFE CYCLE ASSESSMENT OF A BELT CONVEYOR ELECTRIC MOTOR" in Proceedings of the 14th International Conference Research and Development in Mechanical Industry RaDMI 2014 (2014):671-678,
https://hdl.handle.net/21.15107/rcub_machinery_4791 .

TY  - CONF
AU  - Đorđević, Miloš
AU  - Zrnić, Nenad
AU  - Jerman, Boris
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4789
AB  - This paper deals with the simplified life cycle assessment (LCA) of a bucket wheel excavator (BWE) conveyor
belting. Belting is the most important component of a belt conveyor. Simplified LCA was conducted with the Ecodesign
Assistant (EA) and the Ecodesign PILOT (EP) software tools. Conveyor belting was recognised as ABE hybrid type
product, whose 'raw material', 'manufacture' and 'end of life' stages are significant in its life cycle. After the second
iteration, the conveyor belting was recognised as a 'raw material' and 'manufacture' intensive product. Further analysis
considered strategies for possible product improvement suggested by the EP tool.
This particular analysis of conveyor belting is part of a complete LCA of the BWE belt conveyor which should
provide a basis for establishment of the methodology for conducting LCA studies of a BWE or similar types of belt
conveyors.
PB  - FACULTY OF MECHANICAL AND CIVIL ENGINEERING IN KRALJEVO UNIVERSITY OF KRAGUJEVAC
C3  - Proceedings of the 8th Triennial International Conference Heavy Machinery 2014 - HM 2014
T1  - Simplified Life Cycle Assessment of a Conveyor Belting
EP  - 170
SP  - 165
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4789
ER  - 

@conference{
author = "Đorđević, Miloš and Zrnić, Nenad and Jerman, Boris",
year = "2014",
abstract = "This paper deals with the simplified life cycle assessment (LCA) of a bucket wheel excavator (BWE) conveyor
belting. Belting is the most important component of a belt conveyor. Simplified LCA was conducted with the Ecodesign
Assistant (EA) and the Ecodesign PILOT (EP) software tools. Conveyor belting was recognised as ABE hybrid type
product, whose 'raw material', 'manufacture' and 'end of life' stages are significant in its life cycle. After the second
iteration, the conveyor belting was recognised as a 'raw material' and 'manufacture' intensive product. Further analysis
considered strategies for possible product improvement suggested by the EP tool.
This particular analysis of conveyor belting is part of a complete LCA of the BWE belt conveyor which should
provide a basis for establishment of the methodology for conducting LCA studies of a BWE or similar types of belt
conveyors.",
publisher = "FACULTY OF MECHANICAL AND CIVIL ENGINEERING IN KRALJEVO UNIVERSITY OF KRAGUJEVAC",
journal = "Proceedings of the 8th Triennial International Conference Heavy Machinery 2014 - HM 2014",
title = "Simplified Life Cycle Assessment of a Conveyor Belting",
pages = "170-165",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4789"
}

Đorđević, M., Zrnić, N.,& Jerman, B.. (2014). Simplified Life Cycle Assessment of a Conveyor Belting. in Proceedings of the 8th Triennial International Conference Heavy Machinery 2014 - HM 2014
FACULTY OF MECHANICAL AND CIVIL ENGINEERING IN KRALJEVO UNIVERSITY OF KRAGUJEVAC., 165-170.
https://hdl.handle.net/21.15107/rcub_machinery_4789

Đorđević M, Zrnić N, Jerman B. Simplified Life Cycle Assessment of a Conveyor Belting. in Proceedings of the 8th Triennial International Conference Heavy Machinery 2014 - HM 2014. 2014;:165-170.
https://hdl.handle.net/21.15107/rcub_machinery_4789 .

Đorđević, Miloš, Zrnić, Nenad, Jerman, Boris, "Simplified Life Cycle Assessment of a Conveyor Belting" in Proceedings of the 8th Triennial International Conference Heavy Machinery 2014 - HM 2014 (2014):165-170,
https://hdl.handle.net/21.15107/rcub_machinery_4789 .

TY  - CONF
AU  - Đorđević, Miloš
AU  - Zrnić, Nenad
AU  - Jerman, Boris
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4787
AB  - This simplified Life Cycle Assessment (LCA) of belt
conveyor drive pulley is part of complete LCA study of belt
conveyor and it will be used for establishment of
methodology for conducting LCA studies of Bucket Wheel
Excavator (BWE) or similar types of belt conveyors. Drive
pulley as all other belt conveyor pulleys is considered as
part of belt conveyor system that doesn’t need electricity to
fulfill its function. The only component of belt conveyor
system that actually consume electricity is electric motor
(EM). Drive pulley is analyzed with Ecodesign Assistant
(EA) and Ecodesign PILOT (EP) software tools. Analysis
had shown that drive pulley manifest the biggest impact on
the environment in raw materials stage of its life cycle.
Accompanying EP strategies suggested possible product
improvements.
PB  - UNIVERSITY OF NIŠ, FACULTY OF MECHANICAL ENGINEERING, Department for material handling systems and logistics
C3  - Proceedings of the 5th International Conference Transport and Logistics 2014 - TIL 2014
T1  - SIMPLIFIED LIFE CYCLE ASSESSMENT OF BELT CONVEYOR DRIVE PULLEY
EP  - 58
SP  - 55
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4787
ER  - 

@conference{
author = "Đorđević, Miloš and Zrnić, Nenad and Jerman, Boris",
year = "2014",
abstract = "This simplified Life Cycle Assessment (LCA) of belt
conveyor drive pulley is part of complete LCA study of belt
conveyor and it will be used for establishment of
methodology for conducting LCA studies of Bucket Wheel
Excavator (BWE) or similar types of belt conveyors. Drive
pulley as all other belt conveyor pulleys is considered as
part of belt conveyor system that doesn’t need electricity to
fulfill its function. The only component of belt conveyor
system that actually consume electricity is electric motor
(EM). Drive pulley is analyzed with Ecodesign Assistant
(EA) and Ecodesign PILOT (EP) software tools. Analysis
had shown that drive pulley manifest the biggest impact on
the environment in raw materials stage of its life cycle.
Accompanying EP strategies suggested possible product
improvements.",
publisher = "UNIVERSITY OF NIŠ, FACULTY OF MECHANICAL ENGINEERING, Department for material handling systems and logistics",
journal = "Proceedings of the 5th International Conference Transport and Logistics 2014 - TIL 2014",
title = "SIMPLIFIED LIFE CYCLE ASSESSMENT OF BELT CONVEYOR DRIVE PULLEY",
pages = "58-55",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4787"
}

Đorđević, M., Zrnić, N.,& Jerman, B.. (2014). SIMPLIFIED LIFE CYCLE ASSESSMENT OF BELT CONVEYOR DRIVE PULLEY. in Proceedings of the 5th International Conference Transport and Logistics 2014 - TIL 2014
UNIVERSITY OF NIŠ, FACULTY OF MECHANICAL ENGINEERING, Department for material handling systems and logistics., 55-58.
https://hdl.handle.net/21.15107/rcub_machinery_4787

Đorđević M, Zrnić N, Jerman B. SIMPLIFIED LIFE CYCLE ASSESSMENT OF BELT CONVEYOR DRIVE PULLEY. in Proceedings of the 5th International Conference Transport and Logistics 2014 - TIL 2014. 2014;:55-58.
https://hdl.handle.net/21.15107/rcub_machinery_4787 .

Đorđević, Miloš, Zrnić, Nenad, Jerman, Boris, "SIMPLIFIED LIFE CYCLE ASSESSMENT OF BELT CONVEYOR DRIVE PULLEY" in Proceedings of the 5th International Conference Transport and Logistics 2014 - TIL 2014 (2014):55-58,
https://hdl.handle.net/21.15107/rcub_machinery_4787 .

TY  - JOUR
AU  - Langerholc, Marko
AU  - Zrnić, Nenad
AU  - Đorđević, Miloš
AU  - Jerman, Boris
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1784
AB  - Conveyors are machines which typically operate continuously during long periods of time. Even a small increase in energy efficiency leads toward considerable energy savings and therefore improved sustainability. The energy is consumed to overcome dissipative effects and for possible lifting of transported goods. It can be saved only by reducing the dissipative effects. In the paper an example is introduced of two designs of the production machine chain conveyor. The effect of the changes of the design on the energy consumption is established. The dissipative effects are defined using analytical approach which is verified by means of measurements. Improved sustainability in the case of the second design is proven and discussed.
PB  - Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek
T2  - Tehnički vjesnik
T1  - Conveyor design optimization as the provision of sustainability
EP  - 846
IS  - 5
SP  - 837
VL  - 20
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1784
ER  - 

@article{
author = "Langerholc, Marko and Zrnić, Nenad and Đorđević, Miloš and Jerman, Boris",
year = "2013",
abstract = "Conveyors are machines which typically operate continuously during long periods of time. Even a small increase in energy efficiency leads toward considerable energy savings and therefore improved sustainability. The energy is consumed to overcome dissipative effects and for possible lifting of transported goods. It can be saved only by reducing the dissipative effects. In the paper an example is introduced of two designs of the production machine chain conveyor. The effect of the changes of the design on the energy consumption is established. The dissipative effects are defined using analytical approach which is verified by means of measurements. Improved sustainability in the case of the second design is proven and discussed.",
publisher = "Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek",
journal = "Tehnički vjesnik",
title = "Conveyor design optimization as the provision of sustainability",
pages = "846-837",
number = "5",
volume = "20",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1784"
}

Langerholc, M., Zrnić, N., Đorđević, M.,& Jerman, B.. (2013). Conveyor design optimization as the provision of sustainability. in Tehnički vjesnik
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek., 20(5), 837-846.
https://hdl.handle.net/21.15107/rcub_machinery_1784

Langerholc M, Zrnić N, Đorđević M, Jerman B. Conveyor design optimization as the provision of sustainability. in Tehnički vjesnik. 2013;20(5):837-846.
https://hdl.handle.net/21.15107/rcub_machinery_1784 .

Langerholc, Marko, Zrnić, Nenad, Đorđević, Miloš, Jerman, Boris, "Conveyor design optimization as the provision of sustainability" in Tehnički vjesnik, 20, no. 5 (2013):837-846,
https://hdl.handle.net/21.15107/rcub_machinery_1784 .

TY  - JOUR
AU  - Vujičić, A.
AU  - Zrnić, Nenad
AU  - Jerman, Boris
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1698
AB  - The goal of this paper is to present and evaluate the latest trends in the cargo handling equipment (CHE) industry, aimed at mitigating the environmental impact of container terminal operations and contributing to the sustainability of ports. The most common machines for handling containers are described and dealt with separately, with a focus on electric CHE, usually referred to as 'zero emission' CHE. In a separate chapter, recommendations on methodologies suitable for investigation of the environmental footprint of CHE without on-site measuring are reviewed. The life cycle assessment (LCA) methodology as a tool for comparison of conventional and 'zero emission' technology is emphasised with examples. The conventional diesel rubber-tired gantry (RTG) crane and utility tractor rig (UTR) are compared with an electric RTG and UTR using an LCA approach.
PB  - Assoc Mechanical Engineers Technicians Slovenia, Ljubljana
T2  - Strojniski Vestnik-Journal of Mechanical Engineering
T1  - Ports Sustainability: A life cycle assessment of Zero Emission Cargo Handling Equipment
EP  - 555
IS  - 9
SP  - 547
VL  - 59
DO  - 10.5545/sv-jme.2012.933
ER  - 

@article{
author = "Vujičić, A. and Zrnić, Nenad and Jerman, Boris",
year = "2013",
abstract = "The goal of this paper is to present and evaluate the latest trends in the cargo handling equipment (CHE) industry, aimed at mitigating the environmental impact of container terminal operations and contributing to the sustainability of ports. The most common machines for handling containers are described and dealt with separately, with a focus on electric CHE, usually referred to as 'zero emission' CHE. In a separate chapter, recommendations on methodologies suitable for investigation of the environmental footprint of CHE without on-site measuring are reviewed. The life cycle assessment (LCA) methodology as a tool for comparison of conventional and 'zero emission' technology is emphasised with examples. The conventional diesel rubber-tired gantry (RTG) crane and utility tractor rig (UTR) are compared with an electric RTG and UTR using an LCA approach.",
publisher = "Assoc Mechanical Engineers Technicians Slovenia, Ljubljana",
journal = "Strojniski Vestnik-Journal of Mechanical Engineering",
title = "Ports Sustainability: A life cycle assessment of Zero Emission Cargo Handling Equipment",
pages = "555-547",
number = "9",
volume = "59",
doi = "10.5545/sv-jme.2012.933"
}

Vujičić, A., Zrnić, N.,& Jerman, B.. (2013). Ports Sustainability: A life cycle assessment of Zero Emission Cargo Handling Equipment. in Strojniski Vestnik-Journal of Mechanical Engineering
Assoc Mechanical Engineers Technicians Slovenia, Ljubljana., 59(9), 547-555.
https://doi.org/10.5545/sv-jme.2012.933

Vujičić A, Zrnić N, Jerman B. Ports Sustainability: A life cycle assessment of Zero Emission Cargo Handling Equipment. in Strojniski Vestnik-Journal of Mechanical Engineering. 2013;59(9):547-555.
doi:10.5545/sv-jme.2012.933 .

Vujičić, A., Zrnić, Nenad, Jerman, Boris, "Ports Sustainability: A life cycle assessment of Zero Emission Cargo Handling Equipment" in Strojniski Vestnik-Journal of Mechanical Engineering, 59, no. 9 (2013):547-555,
https://doi.org/10.5545/sv-jme.2012.933 . .

TY  - JOUR
AU  - Bošnjak, Srđan
AU  - Petković, Zoran D.
AU  - Gnjatović, Nebojša
AU  - Milenović, Ivan Lj.
AU  - Jerman, Boris
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1804
AB  - This paper presents the results of the study dedicated to the problem of the bucket wheel excavator two-wheel bogie (TWB) strength. Two variants of the TWB structure were analysed: the originally designed and the redesigned. Three calculation models for stress state identification were used for each of the variants. The first does not iclude the influence of the track wheel axle on the lateral loads distribution. The second model includes the mentioned influence while the third considers the track wheel axle as a structural part of the TWB. Validation of the FE models is done by FE simulation of the experiment carried out on an originally designed testing bench. The obtained results fully clarify the occurrence of cracks in the original TWB structure, as well as the considerable impact of the track wheel axles on the TWB structure stress state.
PB  - Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek
T2  - Tehnički vjesnik
T1  - Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie
EP  - 810
IS  - 5
SP  - 803
VL  - 20
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1804
ER  - 

@article{
author = "Bošnjak, Srđan and Petković, Zoran D. and Gnjatović, Nebojša and Milenović, Ivan Lj. and Jerman, Boris",
year = "2013",
abstract = "This paper presents the results of the study dedicated to the problem of the bucket wheel excavator two-wheel bogie (TWB) strength. Two variants of the TWB structure were analysed: the originally designed and the redesigned. Three calculation models for stress state identification were used for each of the variants. The first does not iclude the influence of the track wheel axle on the lateral loads distribution. The second model includes the mentioned influence while the third considers the track wheel axle as a structural part of the TWB. Validation of the FE models is done by FE simulation of the experiment carried out on an originally designed testing bench. The obtained results fully clarify the occurrence of cracks in the original TWB structure, as well as the considerable impact of the track wheel axles on the TWB structure stress state.",
publisher = "Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek",
journal = "Tehnički vjesnik",
title = "Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie",
pages = "810-803",
number = "5",
volume = "20",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1804"
}

Bošnjak, S., Petković, Z. D., Gnjatović, N., Milenović, I. Lj.,& Jerman, B.. (2013). Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie. in Tehnički vjesnik
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek., 20(5), 803-810.
https://hdl.handle.net/21.15107/rcub_machinery_1804

Bošnjak S, Petković ZD, Gnjatović N, Milenović IL, Jerman B. Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie. in Tehnički vjesnik. 2013;20(5):803-810.
https://hdl.handle.net/21.15107/rcub_machinery_1804 .

Bošnjak, Srđan, Petković, Zoran D., Gnjatović, Nebojša, Milenović, Ivan Lj., Jerman, Boris, "Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie" in Tehnički vjesnik, 20, no. 5 (2013):803-810,
https://hdl.handle.net/21.15107/rcub_machinery_1804 .

TY  - CONF
AU  - Đorđević, Miloš
AU  - Batina, Darko
AU  - Zrnić, Nenad
AU  - Jerman, Boris
AU  - Hladnik, Jurij
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4781
AB  - This paper describes current status of modeling energy usage patterns for
PCs, provides insight in their energy consumption, energy costs and CO2
emission. It also provides possible solutions for improving energy
efficiency and energy savings. The study involved analysis of two different
mode settings (High Performance and Power Saver mode) of same
computer and gaming test case study. Usage patterns for both modes were
modeled based on Intel®'s EEP methodology. Workload was simulated
with StressMyPC freeware software. PC energy consumption while
executing workload was measured with Trotec® BX11 measuring device
during 15 days testing period, 8 hours a day. Computer and monitor were
separately observed.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of the XX International Conference MHCL’12
T1  - Modeling energy usage patterns of a PC and ways of improving it's energy efficiency
EP  - 324
SP  - 319
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4781
ER  - 

@conference{
author = "Đorđević, Miloš and Batina, Darko and Zrnić, Nenad and Jerman, Boris and Hladnik, Jurij",
year = "2012",
abstract = "This paper describes current status of modeling energy usage patterns for
PCs, provides insight in their energy consumption, energy costs and CO2
emission. It also provides possible solutions for improving energy
efficiency and energy savings. The study involved analysis of two different
mode settings (High Performance and Power Saver mode) of same
computer and gaming test case study. Usage patterns for both modes were
modeled based on Intel®'s EEP methodology. Workload was simulated
with StressMyPC freeware software. PC energy consumption while
executing workload was measured with Trotec® BX11 measuring device
during 15 days testing period, 8 hours a day. Computer and monitor were
separately observed.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of the XX International Conference MHCL’12",
title = "Modeling energy usage patterns of a PC and ways of improving it's energy efficiency",
pages = "324-319",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4781"
}

Đorđević, M., Batina, D., Zrnić, N., Jerman, B.,& Hladnik, J.. (2012). Modeling energy usage patterns of a PC and ways of improving it's energy efficiency. in Proceedings of the XX International Conference MHCL’12
University of Belgrade, Faculty of Mechanical Engineering., 319-324.
https://hdl.handle.net/21.15107/rcub_machinery_4781

Đorđević M, Batina D, Zrnić N, Jerman B, Hladnik J. Modeling energy usage patterns of a PC and ways of improving it's energy efficiency. in Proceedings of the XX International Conference MHCL’12. 2012;:319-324.
https://hdl.handle.net/21.15107/rcub_machinery_4781 .

Đorđević, Miloš, Batina, Darko, Zrnić, Nenad, Jerman, Boris, Hladnik, Jurij, "Modeling energy usage patterns of a PC and ways of improving it's energy efficiency" in Proceedings of the XX International Conference MHCL’12 (2012):319-324,
https://hdl.handle.net/21.15107/rcub_machinery_4781 .