TY  - BOOK
AU  - Kalajdžić, Milisav
AU  - Tanović, Ljubodrag
AU  - Babić, Bojan
AU  - Glavonjić, Miloš
AU  - Miljković, Zoran
AU  - Puzović, Radovan
AU  - Kokotović, Branko
AU  - Popović, Mihajlo
AU  - Živanović, Saša
AU  - Tošić, Dragan
AU  - Vasić, Ivan
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4436
AB  - Priručnik iz tehnologije obrade rezanjem namenjen je inženjerima, a posebno studentima kao pomoć pri izradi projektnih i ispitnih zadataka iz predmeta Tehnologija mašinogradnje nekada (do 2008. godine) i danas Tehnologija mašinske obrade, kao i iz drugih uže stručnih predmeta koje slušaju studenti proizvodnog mašinstva na osnovnim i master akademskim studijama Mašinskog fakulteta Univerziteta u Beogradu.
U prvom delu priručnika dat je formalizovan koncept za projektovanje i izbor tehnologije obrade rezanjem metala, koji je ilustrovan odgovarajućim primerima, dok drugi deo sadrži bogat sistem podataka, koji se odnose na:
(i) mašinske materijale i materijale reznih alata,
(ii) sistem kvaliteta i tačnost obrade,
(iii) obradne sisteme,
(iv) sistem podataka koji obuhvata režime obrade i
(v) sistem podataka, koji se odnosi na funkcije obradljivosti.
Ovaj priručnik, u pogledu svog sadržaja, predstavlja ravnotežu između klasičnog pristupa sa pokušajem da se svaki proces determiniše, i savremenog pristupa koji maksimizira izlaze i pojednostavljuje primenu. S druge strane, očekuje se da se znatno pojednostavi rešavanje određenih složenih inženjerskih problema, posebno prilikom projektovanja tehnoloških procesa obrade metala rezanjem.
PB  - Mašinski fakultet Univerziteta u Beogradu
T2  - UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833)
T1  - Технологија обраде резањем : приручник
T1  - CUTTING TECHNOLOGY: handbook
EP  - 453
IS  - IX izdanje
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4436
ER  - 

@book{
author = "Kalajdžić, Milisav and Tanović, Ljubodrag and Babić, Bojan and Glavonjić, Miloš and Miljković, Zoran and Puzović, Radovan and Kokotović, Branko and Popović, Mihajlo and Živanović, Saša and Tošić, Dragan and Vasić, Ivan",
year = "2021",
abstract = "Priručnik iz tehnologije obrade rezanjem namenjen je inženjerima, a posebno studentima kao pomoć pri izradi projektnih i ispitnih zadataka iz predmeta Tehnologija mašinogradnje nekada (do 2008. godine) i danas Tehnologija mašinske obrade, kao i iz drugih uže stručnih predmeta koje slušaju studenti proizvodnog mašinstva na osnovnim i master akademskim studijama Mašinskog fakulteta Univerziteta u Beogradu.
U prvom delu priručnika dat je formalizovan koncept za projektovanje i izbor tehnologije obrade rezanjem metala, koji je ilustrovan odgovarajućim primerima, dok drugi deo sadrži bogat sistem podataka, koji se odnose na:
(i) mašinske materijale i materijale reznih alata,
(ii) sistem kvaliteta i tačnost obrade,
(iii) obradne sisteme,
(iv) sistem podataka koji obuhvata režime obrade i
(v) sistem podataka, koji se odnosi na funkcije obradljivosti.
Ovaj priručnik, u pogledu svog sadržaja, predstavlja ravnotežu između klasičnog pristupa sa pokušajem da se svaki proces determiniše, i savremenog pristupa koji maksimizira izlaze i pojednostavljuje primenu. S druge strane, očekuje se da se znatno pojednostavi rešavanje određenih složenih inženjerskih problema, posebno prilikom projektovanja tehnoloških procesa obrade metala rezanjem.",
publisher = "Mašinski fakultet Univerziteta u Beogradu",
journal = "UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833)",
title = "Технологија обраде резањем : приручник, CUTTING TECHNOLOGY: handbook",
pages = "453-1",
number = "IX izdanje",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4436"
}

Kalajdžić, M., Tanović, L., Babić, B., Glavonjić, M., Miljković, Z., Puzović, R., Kokotović, B., Popović, M., Živanović, S., Tošić, D.,& Vasić, I.. (2021). Технологија обраде резањем : приручник. in UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833)
Mašinski fakultet Univerziteta u Beogradu.(IX izdanje), 1-453.
https://hdl.handle.net/21.15107/rcub_machinery_4436

Kalajdžić M, Tanović L, Babić B, Glavonjić M, Miljković Z, Puzović R, Kokotović B, Popović M, Živanović S, Tošić D, Vasić I. Технологија обраде резањем : приручник. in UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833). 2021;(IX izdanje):1-453.
https://hdl.handle.net/21.15107/rcub_machinery_4436 .

Kalajdžić, Milisav, Tanović, Ljubodrag, Babić, Bojan, Glavonjić, Miloš, Miljković, Zoran, Puzović, Radovan, Kokotović, Branko, Popović, Mihajlo, Živanović, Saša, Tošić, Dragan, Vasić, Ivan, "Технологија обраде резањем : приручник" in UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833), no. IX izdanje (2021):1-453,
https://hdl.handle.net/21.15107/rcub_machinery_4436 .

TY  - CONF
AU  - Kalajdžić, Milisav
AU  - Babić, Bojan
AU  - Miljković, Zoran
AU  - Kokotović, Branko
AU  - Popović, Mihajlo
AU  - Lukić, Ljubomir
AU  - Đapić, Mirko
AU  - Radiša, Radomir
AU  - Uzunović, Slađana
AU  - Slavković, Radomir
PY  - 2008
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6444
AB  - Rad, pored toga što daje rekapitulaciju sprovedenih opsežnih istraživanja koja se odnose na automatizovano projektovanje obradnih sistema i tehnoloških procesa u industriji prerade metala, posebno prezentira naučne rezultate u domenu razvoja automatizovanog tehnološkog prepoznavanja mašinskih delova, zasnovanog na primeni veštačkih neuronskih mreža. Značajan naučni doprinos u ovom radovu odnosi se na implementaciju i verifikaciju softvera sopstvenog razvoja „BPnet_V1.0”, koji je korišćen tokom tehnološkog prepoznavanja tipskih tehnoloških formi na prizmatičnim delovima, čime je potvrđena njegova široka primena, kao i važna upotrebna vrednost u razvoju naučnog podmlatka izražena kroz izradu njihovih magistarskih teza.
AB  - This paper, in addition to giving a recapitulation of the extensive research conducted related to the automated design of machining systems and manufacturing processes in the metal processing industry, especially presents scientific results in the field of the development of automated feature recognition of machine parts, based on the application of artificial neural networks. A significant scientific contribution in this work refers to the implementation and verification of the self-developed software "BPnet_V1.0", which was used during the feature recognition of typical manufacturing forms on prismatic parts, and confirmed its wide application as well as its important use value in the development of scientific research expressed through the preparation of master's theses realization.
PB  - JUPITER Asocijacija, Univerzitet u Beogradu - Mašinski fakultet
C3  - 34. JUPITER Konferencija, 30. simpozijum „NU-ROBOTI-FTS“, Zbornik radova / 34th JUPITER Conference, Proceedings - CD (in Serbian)
T1  - Имплементација аутоматизованог пројектовања обрадних система и процеса у индустрији прераде метала – Рекапитулација укупних резултата на пројекту ТР-6319Б
T1  - Automated Design Implementation of Machining Systems and Processes in Metalworking Industry
EP  - 3.163
SP  - 3.148
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6444
ER  - 

@conference{
author = "Kalajdžić, Milisav and Babić, Bojan and Miljković, Zoran and Kokotović, Branko and Popović, Mihajlo and Lukić, Ljubomir and Đapić, Mirko and Radiša, Radomir and Uzunović, Slađana and Slavković, Radomir",
year = "2008",
abstract = "Rad, pored toga što daje rekapitulaciju sprovedenih opsežnih istraživanja koja se odnose na automatizovano projektovanje obradnih sistema i tehnoloških procesa u industriji prerade metala, posebno prezentira naučne rezultate u domenu razvoja automatizovanog tehnološkog prepoznavanja mašinskih delova, zasnovanog na primeni veštačkih neuronskih mreža. Značajan naučni doprinos u ovom radovu odnosi se na implementaciju i verifikaciju softvera sopstvenog razvoja „BPnet_V1.0”, koji je korišćen tokom tehnološkog prepoznavanja tipskih tehnoloških formi na prizmatičnim delovima, čime je potvrđena njegova široka primena, kao i važna upotrebna vrednost u razvoju naučnog podmlatka izražena kroz izradu njihovih magistarskih teza., This paper, in addition to giving a recapitulation of the extensive research conducted related to the automated design of machining systems and manufacturing processes in the metal processing industry, especially presents scientific results in the field of the development of automated feature recognition of machine parts, based on the application of artificial neural networks. A significant scientific contribution in this work refers to the implementation and verification of the self-developed software "BPnet_V1.0", which was used during the feature recognition of typical manufacturing forms on prismatic parts, and confirmed its wide application as well as its important use value in the development of scientific research expressed through the preparation of master's theses realization.",
publisher = "JUPITER Asocijacija, Univerzitet u Beogradu - Mašinski fakultet",
journal = "34. JUPITER Konferencija, 30. simpozijum „NU-ROBOTI-FTS“, Zbornik radova / 34th JUPITER Conference, Proceedings - CD (in Serbian)",
title = "Имплементација аутоматизованог пројектовања обрадних система и процеса у индустрији прераде метала – Рекапитулација укупних резултата на пројекту ТР-6319Б, Automated Design Implementation of Machining Systems and Processes in Metalworking Industry",
pages = "3.163-3.148",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6444"
}

Kalajdžić, M., Babić, B., Miljković, Z., Kokotović, B., Popović, M., Lukić, L., Đapić, M., Radiša, R., Uzunović, S.,& Slavković, R.. (2008). Имплементација аутоматизованог пројектовања обрадних система и процеса у индустрији прераде метала – Рекапитулација укупних резултата на пројекту ТР-6319Б. in 34. JUPITER Konferencija, 30. simpozijum „NU-ROBOTI-FTS“, Zbornik radova / 34th JUPITER Conference, Proceedings - CD (in Serbian)
JUPITER Asocijacija, Univerzitet u Beogradu - Mašinski fakultet., 3.148-3.163.
https://hdl.handle.net/21.15107/rcub_machinery_6444

Kalajdžić M, Babić B, Miljković Z, Kokotović B, Popović M, Lukić L, Đapić M, Radiša R, Uzunović S, Slavković R. Имплементација аутоматизованог пројектовања обрадних система и процеса у индустрији прераде метала – Рекапитулација укупних резултата на пројекту ТР-6319Б. in 34. JUPITER Konferencija, 30. simpozijum „NU-ROBOTI-FTS“, Zbornik radova / 34th JUPITER Conference, Proceedings - CD (in Serbian). 2008;:3.148-3.163.
https://hdl.handle.net/21.15107/rcub_machinery_6444 .

Kalajdžić, Milisav, Babić, Bojan, Miljković, Zoran, Kokotović, Branko, Popović, Mihajlo, Lukić, Ljubomir, Đapić, Mirko, Radiša, Radomir, Uzunović, Slađana, Slavković, Radomir, "Имплементација аутоматизованог пројектовања обрадних система и процеса у индустрији прераде метала – Рекапитулација укупних резултата на пројекту ТР-6319Б" in 34. JUPITER Konferencija, 30. simpozijum „NU-ROBOTI-FTS“, Zbornik radova / 34th JUPITER Conference, Proceedings - CD (in Serbian) (2008):3.148-3.163,
https://hdl.handle.net/21.15107/rcub_machinery_6444 .

TY  - CONF
AU  - Babić, Bojan
AU  - Bojović, Božica
AU  - Kalajdžić, Milisav
AU  - Miljković, Zoran
PY  - 2008
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4482
AB  - Growing interest in biomaterials manufacturing and surface technology has prompted in an investigation of contact lens (CL) surface based on fractal approach, using JSPM 5200 instrument for measurement and MatLab software for image processing. Topography and phase images were recorded in order to investigate surface roughness and properties after an extended period of CL wearing. Since there is no strong recommendation for RGP CL wear period, wearer's reports on the end-stages when they notice that vision is deteriorated, vary considerably. The authors` aim is to point out that time is merely a commercial category for RGP CL replacement and that only significant changes in surface properties render such replacement necessary.
PB  - The Aristotle University of Thessaloniki
C3  - Proceedings of the 3rd  International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event, 1-3 October 2008, Chalkidiki, Greece
T1  - Topography and Phase Images Investigation of the Used RGP Contact Lens Inner Surface
EP  - 411
SP  - 405
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4482
ER  - 

@conference{
author = "Babić, Bojan and Bojović, Božica and Kalajdžić, Milisav and Miljković, Zoran",
year = "2008",
abstract = "Growing interest in biomaterials manufacturing and surface technology has prompted in an investigation of contact lens (CL) surface based on fractal approach, using JSPM 5200 instrument for measurement and MatLab software for image processing. Topography and phase images were recorded in order to investigate surface roughness and properties after an extended period of CL wearing. Since there is no strong recommendation for RGP CL wear period, wearer's reports on the end-stages when they notice that vision is deteriorated, vary considerably. The authors` aim is to point out that time is merely a commercial category for RGP CL replacement and that only significant changes in surface properties render such replacement necessary.",
publisher = "The Aristotle University of Thessaloniki",
journal = "Proceedings of the 3rd  International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event, 1-3 October 2008, Chalkidiki, Greece",
title = "Topography and Phase Images Investigation of the Used RGP Contact Lens Inner Surface",
pages = "411-405",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4482"
}

Babić, B., Bojović, B., Kalajdžić, M.,& Miljković, Z.. (2008). Topography and Phase Images Investigation of the Used RGP Contact Lens Inner Surface. in Proceedings of the 3rd  International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event, 1-3 October 2008, Chalkidiki, Greece
The Aristotle University of Thessaloniki., 405-411.
https://hdl.handle.net/21.15107/rcub_machinery_4482

Babić B, Bojović B, Kalajdžić M, Miljković Z. Topography and Phase Images Investigation of the Used RGP Contact Lens Inner Surface. in Proceedings of the 3rd  International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event, 1-3 October 2008, Chalkidiki, Greece. 2008;:405-411.
https://hdl.handle.net/21.15107/rcub_machinery_4482 .

Babić, Bojan, Bojović, Božica, Kalajdžić, Milisav, Miljković, Zoran, "Topography and Phase Images Investigation of the Used RGP Contact Lens Inner Surface" in Proceedings of the 3rd  International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event, 1-3 October 2008, Chalkidiki, Greece (2008):405-411,
https://hdl.handle.net/21.15107/rcub_machinery_4482 .

TY  - CONF
AU  - Bojović, Božica
AU  - Kalajdžić, Milisav
AU  - Miljković, Zoran
AU  - Babić, Bojan
PY  - 2008
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4951
AB  - It is well known that bio/non-bio interface between the living tissue and the artificial object is established through its surface. The main physical attribute of these artificial objects made of biocompatible materials is surface roughness. Surface characterization, as a part of the coating characteristics, needs to be defined in order to describe the surface complexity. The roughness of coatings and substrate surface was found to demonstrate fractal properties. This is why fractal dimension is suggested as a parameter for the evaluation of contact lens surface topography
images.
PB  - The Aristotle University of Thessaloniki
C3  - Proceedings of the 3rd International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event
T1  - Fractal Approach for Substrates Surface Topography Image Evaluation
EP  - 452
SP  - 443
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4951
ER  - 

@conference{
author = "Bojović, Božica and Kalajdžić, Milisav and Miljković, Zoran and Babić, Bojan",
year = "2008",
abstract = "It is well known that bio/non-bio interface between the living tissue and the artificial object is established through its surface. The main physical attribute of these artificial objects made of biocompatible materials is surface roughness. Surface characterization, as a part of the coating characteristics, needs to be defined in order to describe the surface complexity. The roughness of coatings and substrate surface was found to demonstrate fractal properties. This is why fractal dimension is suggested as a parameter for the evaluation of contact lens surface topography
images.",
publisher = "The Aristotle University of Thessaloniki",
journal = "Proceedings of the 3rd International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event",
title = "Fractal Approach for Substrates Surface Topography Image Evaluation",
pages = "452-443",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4951"
}

Bojović, B., Kalajdžić, M., Miljković, Z.,& Babić, B.. (2008). Fractal Approach for Substrates Surface Topography Image Evaluation. in Proceedings of the 3rd International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event
The Aristotle University of Thessaloniki., 443-452.
https://hdl.handle.net/21.15107/rcub_machinery_4951

Bojović B, Kalajdžić M, Miljković Z, Babić B. Fractal Approach for Substrates Surface Topography Image Evaluation. in Proceedings of the 3rd International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event. 2008;:443-452.
https://hdl.handle.net/21.15107/rcub_machinery_4951 .

Bojović, Božica, Kalajdžić, Milisav, Miljković, Zoran, Babić, Bojan, "Fractal Approach for Substrates Surface Topography Image Evaluation" in Proceedings of the 3rd International Conference on Manufacturing Engineering (ICMEN 2008) and EUREKA Brokerage Event (2008):443-452,
https://hdl.handle.net/21.15107/rcub_machinery_4951 .

TY  - CONF
AU  - Miljković, Zoran
AU  - Lazarević, Ivan
AU  - Kalajdžić, Milisav
PY  - 2005
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4956
AB  - In recent years, computer-aided engineering (CAE) techniques have been applied increasingly with great success in metal forming research as well as in the forming industry. Possibility to obtain loads, stresses, velocities and other forging process parameters, gives significant role to the finite element analysis. By using one of the most famous contemporary system for nonlinear analysis - DEFORM TM the influence of preformed billet shape in the cold forging process has been analyzed. It is shown that optimization and computer-aided process modeling could lead to
significant reduction of production resources and energy.
PB  - The Aristotle University of Thessaloniki
C3  - Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN 2005) and EUREKA Brokerage Event
T1  - Forging Process Modeling by Using Finite Element Analysis
EP  - 243
SP  - 237
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4956
ER  - 

@conference{
author = "Miljković, Zoran and Lazarević, Ivan and Kalajdžić, Milisav",
year = "2005",
abstract = "In recent years, computer-aided engineering (CAE) techniques have been applied increasingly with great success in metal forming research as well as in the forming industry. Possibility to obtain loads, stresses, velocities and other forging process parameters, gives significant role to the finite element analysis. By using one of the most famous contemporary system for nonlinear analysis - DEFORM TM the influence of preformed billet shape in the cold forging process has been analyzed. It is shown that optimization and computer-aided process modeling could lead to
significant reduction of production resources and energy.",
publisher = "The Aristotle University of Thessaloniki",
journal = "Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN 2005) and EUREKA Brokerage Event",
title = "Forging Process Modeling by Using Finite Element Analysis",
pages = "243-237",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4956"
}

Miljković, Z., Lazarević, I.,& Kalajdžić, M.. (2005). Forging Process Modeling by Using Finite Element Analysis. in Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN 2005) and EUREKA Brokerage Event
The Aristotle University of Thessaloniki., 237-243.
https://hdl.handle.net/21.15107/rcub_machinery_4956

Miljković Z, Lazarević I, Kalajdžić M. Forging Process Modeling by Using Finite Element Analysis. in Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN 2005) and EUREKA Brokerage Event. 2005;:237-243.
https://hdl.handle.net/21.15107/rcub_machinery_4956 .

Miljković, Zoran, Lazarević, Ivan, Kalajdžić, Milisav, "Forging Process Modeling by Using Finite Element Analysis" in Proceedings of the 2nd International Conference on Manufacturing Engineering (ICMEN 2005) and EUREKA Brokerage Event (2005):237-243,
https://hdl.handle.net/21.15107/rcub_machinery_4956 .

TY  - CONF
AU  - Kalajdžić, Milisav
AU  - Miljković, Zoran
AU  - Babić, Bojan
PY  - 2003
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6585
AB  - Današnji razvoj sistema za projektovanje tehnoloških procesa (CAPP), orijentisan je na uvođenje novih ideja baziranih na naprednim tehnikama veštačke inteligencije. Naime, savremeni CAPP sistemi imaju zadatak da uvođenjem veštačke inteligencije u modul za tehnološko prepoznavanje i grubo projektovanje tehnoloških procesa smanje projektantsko vreme. U radu je data analiza ove nove primene veštačkih neuronskih mreža, uz prezentaciju postupka formiranja binarnih vektora koji definišu tipske tehnološke forme, kao i njihove kompleksnije oblike, sa ciljem da se predstavi jedan od modula novog pristupa projektovanju tehnoloških procesa.
PB  - Novi Sad : Faculty of Technical Sciences, Department of Production Engineering
C3  - VIII Međunardona konferencija 'Fleksibilne tehnologije' - MMA 2003 / Proceedings of the 8th International Conference on Flexible Technologies - MMA 2003
T1  - Tehnološko prepoznavanje bazirano na veštačkim neuronskim mrežama
T1  - Feature Recognition Based on Artificial Neural Networks
EP  - 92
SP  - 91
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6585
ER  - 

@conference{
author = "Kalajdžić, Milisav and Miljković, Zoran and Babić, Bojan",
year = "2003",
abstract = "Današnji razvoj sistema za projektovanje tehnoloških procesa (CAPP), orijentisan je na uvođenje novih ideja baziranih na naprednim tehnikama veštačke inteligencije. Naime, savremeni CAPP sistemi imaju zadatak da uvođenjem veštačke inteligencije u modul za tehnološko prepoznavanje i grubo projektovanje tehnoloških procesa smanje projektantsko vreme. U radu je data analiza ove nove primene veštačkih neuronskih mreža, uz prezentaciju postupka formiranja binarnih vektora koji definišu tipske tehnološke forme, kao i njihove kompleksnije oblike, sa ciljem da se predstavi jedan od modula novog pristupa projektovanju tehnoloških procesa.",
publisher = "Novi Sad : Faculty of Technical Sciences, Department of Production Engineering",
journal = "VIII Međunardona konferencija 'Fleksibilne tehnologije' - MMA 2003 / Proceedings of the 8th International Conference on Flexible Technologies - MMA 2003",
title = "Tehnološko prepoznavanje bazirano na veštačkim neuronskim mrežama, Feature Recognition Based on Artificial Neural Networks",
pages = "92-91",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6585"
}

Kalajdžić, M., Miljković, Z.,& Babić, B.. (2003). Tehnološko prepoznavanje bazirano na veštačkim neuronskim mrežama. in VIII Međunardona konferencija 'Fleksibilne tehnologije' - MMA 2003 / Proceedings of the 8th International Conference on Flexible Technologies - MMA 2003
Novi Sad : Faculty of Technical Sciences, Department of Production Engineering., 91-92.
https://hdl.handle.net/21.15107/rcub_machinery_6585

Kalajdžić M, Miljković Z, Babić B. Tehnološko prepoznavanje bazirano na veštačkim neuronskim mrežama. in VIII Međunardona konferencija 'Fleksibilne tehnologije' - MMA 2003 / Proceedings of the 8th International Conference on Flexible Technologies - MMA 2003. 2003;:91-92.
https://hdl.handle.net/21.15107/rcub_machinery_6585 .

Kalajdžić, Milisav, Miljković, Zoran, Babić, Bojan, "Tehnološko prepoznavanje bazirano na veštačkim neuronskim mrežama" in VIII Međunardona konferencija 'Fleksibilne tehnologije' - MMA 2003 / Proceedings of the 8th International Conference on Flexible Technologies - MMA 2003 (2003):91-92,
https://hdl.handle.net/21.15107/rcub_machinery_6585 .

TY  - CONF
AU  - Miljković, Zoran
AU  - Babić, Bojan
AU  - Kalajdžić, Milisav
PY  - 2002
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4959
AB  - This paper carried out exceptional implementation of ART-1 neural network in the analysis of the manufacturing similarity of the cylindrical parts within the group technology design. Established concept of the group technology design begins from the complex part of the group or the group representative. Group representative has all the geometrical elements of the parts in group, and manufacturing procedure may be applied to the machining of any part in the group. The complex part may be realistic or a hypothetical one. The ART-1 artificial neural network provided manufacturing classification according to the geometrical similarities of work-pieces for the group of cylindrical parts. For the manufacturing similarity identification within the group technology design, software "ART-1 Simulator" is developed and presented in this paper.
PB  - The Aristotle University of Thessaloniki
C3  - Proceedings of the 1st International Conference on Manufacturing Engineering (ICMEN 2002) and EUREKA Brokerage Event
T1  - Manufacturing Similarity Identification in Group Technology Design Based on the "ART-1 Simulator"
EP  - 335
SP  - 325
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4959
ER  - 

@conference{
author = "Miljković, Zoran and Babić, Bojan and Kalajdžić, Milisav",
year = "2002",
abstract = "This paper carried out exceptional implementation of ART-1 neural network in the analysis of the manufacturing similarity of the cylindrical parts within the group technology design. Established concept of the group technology design begins from the complex part of the group or the group representative. Group representative has all the geometrical elements of the parts in group, and manufacturing procedure may be applied to the machining of any part in the group. The complex part may be realistic or a hypothetical one. The ART-1 artificial neural network provided manufacturing classification according to the geometrical similarities of work-pieces for the group of cylindrical parts. For the manufacturing similarity identification within the group technology design, software "ART-1 Simulator" is developed and presented in this paper.",
publisher = "The Aristotle University of Thessaloniki",
journal = "Proceedings of the 1st International Conference on Manufacturing Engineering (ICMEN 2002) and EUREKA Brokerage Event",
title = "Manufacturing Similarity Identification in Group Technology Design Based on the "ART-1 Simulator"",
pages = "335-325",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4959"
}

Miljković, Z., Babić, B.,& Kalajdžić, M.. (2002). Manufacturing Similarity Identification in Group Technology Design Based on the "ART-1 Simulator". in Proceedings of the 1st International Conference on Manufacturing Engineering (ICMEN 2002) and EUREKA Brokerage Event
The Aristotle University of Thessaloniki., 325-335.
https://hdl.handle.net/21.15107/rcub_machinery_4959

Miljković Z, Babić B, Kalajdžić M. Manufacturing Similarity Identification in Group Technology Design Based on the "ART-1 Simulator". in Proceedings of the 1st International Conference on Manufacturing Engineering (ICMEN 2002) and EUREKA Brokerage Event. 2002;:325-335.
https://hdl.handle.net/21.15107/rcub_machinery_4959 .

Miljković, Zoran, Babić, Bojan, Kalajdžić, Milisav, "Manufacturing Similarity Identification in Group Technology Design Based on the "ART-1 Simulator"" in Proceedings of the 1st International Conference on Manufacturing Engineering (ICMEN 2002) and EUREKA Brokerage Event (2002):325-335,
https://hdl.handle.net/21.15107/rcub_machinery_4959 .

TY  - CONF
AU  - Kalajdžić, Milisav
AU  - Glavonjić, Miloš
AU  - Vasić, Ivan
AU  - Živanović, Saša
PY  - 1997
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6659
AB  - Sredinom ovog veka za inženjera proizvodnog mašinstva je rečeno da je obrazovan, uvežban i iskusan poslenik u tehnologiji i organizaciji i da je kompetentan da prepozna faktore koji utiču na izradu proizvoda. On vodi tehnološke procese razvijanjem efektivne koordinacije napora kojima treba dostići potrebnu tačnost, proizvodnost i ekonomičnost. Ovde je to interpretirano egzistencijom modernih tehnoloških sistema koje karakterišu: agilnost, sinhronizacija, fleksibilnost i modularnost. Zasnovan im je prapočetak morfološkog prostora, procenjen im je sadašnji status i
popisane su neke njihove osobine. Na jednom primeru je pokazano kako je na Mašinskom fakultetu u Beogradu postavljen metod projektovanja i gradnje komponenata jednog proizvoda.
AB  - In the middle of this century, the production engineer is said to be educated skilled and experienced worker in technology and organization and competent to recognize factors which have effect on manufacture of products. He leads manufacturing processes by developing effective coordination of strengths which are necessary to obtain required accuracy, productivity and
economy. Here, it is interpreted by existence of modern manufacturing systems which are characterized by: agility, synchronization, flexibility and modularity. Its morphological space is defined, their present state is estimated and some characteristics are listed. It is presented on one example how the design method and component building of one product is established at the
Faculty of Mechanical Engineering in Belgrade.
PB  - JURIT Jugoslovensko udruženje za računarstvo , informatiku, Telekomunikacije, automatizaciju i menadžment
PB  - Yugoslav Association for Computers, Information Technologies, Telecommunications, Automation and Management
C3  - XII Naučno-stručni skup, Info - Teh 1997, Zbornik radova, Vrnjačka Banja, 16-20. jun 1997.
T1  - Prilog razvoju novih tehnologija
T1  - Contribution to development of new technologies
EP  - 394
SP  - 389
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6659
ER  - 

@conference{
author = "Kalajdžić, Milisav and Glavonjić, Miloš and Vasić, Ivan and Živanović, Saša",
year = "1997",
abstract = "Sredinom ovog veka za inženjera proizvodnog mašinstva je rečeno da je obrazovan, uvežban i iskusan poslenik u tehnologiji i organizaciji i da je kompetentan da prepozna faktore koji utiču na izradu proizvoda. On vodi tehnološke procese razvijanjem efektivne koordinacije napora kojima treba dostići potrebnu tačnost, proizvodnost i ekonomičnost. Ovde je to interpretirano egzistencijom modernih tehnoloških sistema koje karakterišu: agilnost, sinhronizacija, fleksibilnost i modularnost. Zasnovan im je prapočetak morfološkog prostora, procenjen im je sadašnji status i
popisane su neke njihove osobine. Na jednom primeru je pokazano kako je na Mašinskom fakultetu u Beogradu postavljen metod projektovanja i gradnje komponenata jednog proizvoda., In the middle of this century, the production engineer is said to be educated skilled and experienced worker in technology and organization and competent to recognize factors which have effect on manufacture of products. He leads manufacturing processes by developing effective coordination of strengths which are necessary to obtain required accuracy, productivity and
economy. Here, it is interpreted by existence of modern manufacturing systems which are characterized by: agility, synchronization, flexibility and modularity. Its morphological space is defined, their present state is estimated and some characteristics are listed. It is presented on one example how the design method and component building of one product is established at the
Faculty of Mechanical Engineering in Belgrade.",
publisher = "JURIT Jugoslovensko udruženje za računarstvo , informatiku, Telekomunikacije, automatizaciju i menadžment, Yugoslav Association for Computers, Information Technologies, Telecommunications, Automation and Management",
journal = "XII Naučno-stručni skup, Info - Teh 1997, Zbornik radova, Vrnjačka Banja, 16-20. jun 1997.",
title = "Prilog razvoju novih tehnologija, Contribution to development of new technologies",
pages = "394-389",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6659"
}

Kalajdžić, M., Glavonjić, M., Vasić, I.,& Živanović, S.. (1997). Prilog razvoju novih tehnologija. in XII Naučno-stručni skup, Info - Teh 1997, Zbornik radova, Vrnjačka Banja, 16-20. jun 1997.
JURIT Jugoslovensko udruženje za računarstvo , informatiku, Telekomunikacije, automatizaciju i menadžment., 389-394.
https://hdl.handle.net/21.15107/rcub_machinery_6659

Kalajdžić M, Glavonjić M, Vasić I, Živanović S. Prilog razvoju novih tehnologija. in XII Naučno-stručni skup, Info - Teh 1997, Zbornik radova, Vrnjačka Banja, 16-20. jun 1997.. 1997;:389-394.
https://hdl.handle.net/21.15107/rcub_machinery_6659 .

Kalajdžić, Milisav, Glavonjić, Miloš, Vasić, Ivan, Živanović, Saša, "Prilog razvoju novih tehnologija" in XII Naučno-stručni skup, Info - Teh 1997, Zbornik radova, Vrnjačka Banja, 16-20. jun 1997. (1997):389-394,
https://hdl.handle.net/21.15107/rcub_machinery_6659 .