TY  - JOUR
AU  - Tabasević, Ilija D.
AU  - Jovanović, Rastko D.
AU  - Milanović, Dragan
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3706
AB  - Safe storage of pharmaceutical products is of great importance due to potential hazards for human health. The aim of this study was to assess the ability of phar-maceutical storage to recover design temperature during ventilation system recov-ery. The performed CFD simulations showed good agreement with experimental temperature measurements. Numerical results allowed in-depth analysis of flow field and temperature distribution inside the storage. It was discovered that the flow field is highly non -uniform, which consequently leads to an uneven tempera -ture distribution of pallets with products. However, a high inlet mass-flow rate ensured that all pallets reach the designed temperature.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Experimental and numerical investigation of thermal and flow conditions inside a large pharmaceutical storage after the ventilation system failure
EP  - 814
IS  - 1
SP  - 801
VL  - 26
DO  - 10.2298/TSCI210522346T
ER  - 

@article{
author = "Tabasević, Ilija D. and Jovanović, Rastko D. and Milanović, Dragan",
year = "2022",
abstract = "Safe storage of pharmaceutical products is of great importance due to potential hazards for human health. The aim of this study was to assess the ability of phar-maceutical storage to recover design temperature during ventilation system recov-ery. The performed CFD simulations showed good agreement with experimental temperature measurements. Numerical results allowed in-depth analysis of flow field and temperature distribution inside the storage. It was discovered that the flow field is highly non -uniform, which consequently leads to an uneven tempera -ture distribution of pallets with products. However, a high inlet mass-flow rate ensured that all pallets reach the designed temperature.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Experimental and numerical investigation of thermal and flow conditions inside a large pharmaceutical storage after the ventilation system failure",
pages = "814-801",
number = "1",
volume = "26",
doi = "10.2298/TSCI210522346T"
}

Tabasević, I. D., Jovanović, R. D.,& Milanović, D.. (2022). Experimental and numerical investigation of thermal and flow conditions inside a large pharmaceutical storage after the ventilation system failure. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 26(1), 801-814.
https://doi.org/10.2298/TSCI210522346T

Tabasević ID, Jovanović RD, Milanović D. Experimental and numerical investigation of thermal and flow conditions inside a large pharmaceutical storage after the ventilation system failure. in Thermal Science. 2022;26(1):801-814.
doi:10.2298/TSCI210522346T .

Tabasević, Ilija D., Jovanović, Rastko D., Milanović, Dragan, "Experimental and numerical investigation of thermal and flow conditions inside a large pharmaceutical storage after the ventilation system failure" in Thermal Science, 26, no. 1 (2022):801-814,
https://doi.org/10.2298/TSCI210522346T . .

TY  - JOUR
AU  - Lukić, Jelena
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Borota-Tišma, Ankica
AU  - Janković, Aleksandra
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4062
AB  - The aim of the paper is to determine the risk level of a contract extension with the existing policyholders, which is further propagated to the business effectiveness and long-term sustainability of the company. The uncertainties in the relative importance of risk factors, their values, and risk levels are described by the linguistic forms, which are modeled by using the fuzzy sets theory. The evaluations of the relative importance of risk factors are stated as a fuzzy group decision-making problem. The weights of risk factors are obtained by using a fuzzy analytic hierarchy process. The determination of production rules for the assessment of the risk level is based on fuzzy IF-THAN rules. The verification of the model is performed by using real-life data originating from the insurance company which operates in the Republic of Serbia.
PB  - MDPI
T2  - Mathematics
T1  - Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector
DO  - 10.3390/math10183268
ER  - 

@article{
author = "Lukić, Jelena and Misita, Mirjana and Milanović, Dragan and Borota-Tišma, Ankica and Janković, Aleksandra",
year = "2022",
abstract = "The aim of the paper is to determine the risk level of a contract extension with the existing policyholders, which is further propagated to the business effectiveness and long-term sustainability of the company. The uncertainties in the relative importance of risk factors, their values, and risk levels are described by the linguistic forms, which are modeled by using the fuzzy sets theory. The evaluations of the relative importance of risk factors are stated as a fuzzy group decision-making problem. The weights of risk factors are obtained by using a fuzzy analytic hierarchy process. The determination of production rules for the assessment of the risk level is based on fuzzy IF-THAN rules. The verification of the model is performed by using real-life data originating from the insurance company which operates in the Republic of Serbia.",
publisher = "MDPI",
journal = "Mathematics",
title = "Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector",
doi = "10.3390/math10183268"
}

Lukić, J., Misita, M., Milanović, D., Borota-Tišma, A.,& Janković, A.. (2022). Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector. in Mathematics
MDPI..
https://doi.org/10.3390/math10183268

Lukić J, Misita M, Milanović D, Borota-Tišma A, Janković A. Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector. in Mathematics. 2022;.
doi:10.3390/math10183268 .

Lukić, Jelena, Misita, Mirjana, Milanović, Dragan, Borota-Tišma, Ankica, Janković, Aleksandra, "Determining the Risk Level in Client Analysis by Applying Fuzzy Logic in Insurance Sector" in Mathematics (2022),
https://doi.org/10.3390/math10183268 . .

TY  - CONF
AU  - Milanović, Dragan
AU  - Misita, Mirjana
AU  - Dabić, Svetlana
AU  - Petrović, Nikola
PY  - 2021
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4151
AB  - Posledica globalnih megatrendova jesu značajne strukturne
promene kojima je izložena industrijska proizvodnja. Tema ovog rada jeste
Pametna fabrika, jedna od najpopularnijih i najrevolucionarnijih u oblasti
nauke i inženjerstva, dok je istovremeno i među najkontroverznijim sa
sociološkog, psihološkog, pa i političkog aspekta. Najveći deo analize će biti
usmeren na samu industriju i tehnologije, ali kako se za ovu industrijsku
revoluciju smatra da će najviše od svake do sada uticati na promenu samih
ljudi, biće reči i o tome. Ideja o revolucionarnom pristupu industriji nastala je
kao posledica eksponencijalnog razvoja tehnologija u poslednjih dvadeset
godina. Jednostavno, ljudi žele da sve ono što su otkrili pronađe svoju svrhu,
u punom potencijalu, gde god je to moguće. Taj proces iziskuje korenite
promene u svim sferama društva, a promene, naročito korenite, često
izazivaju mistifikaciju, strepnju ili oduševljenje.
PB  - Zaječar : Fakultet za menadžment
C3  - IV Međunarodna naučna konferencija Regionalni razvoj i prekogranična saradnja : zbornik radova
T1  - Pametna fabrika kao centralna komponenta koncepta Industrije 4.0
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4151
ER  - 

@conference{
author = "Milanović, Dragan and Misita, Mirjana and Dabić, Svetlana and Petrović, Nikola",
year = "2021",
abstract = "Posledica globalnih megatrendova jesu značajne strukturne
promene kojima je izložena industrijska proizvodnja. Tema ovog rada jeste
Pametna fabrika, jedna od najpopularnijih i najrevolucionarnijih u oblasti
nauke i inženjerstva, dok je istovremeno i među najkontroverznijim sa
sociološkog, psihološkog, pa i političkog aspekta. Najveći deo analize će biti
usmeren na samu industriju i tehnologije, ali kako se za ovu industrijsku
revoluciju smatra da će najviše od svake do sada uticati na promenu samih
ljudi, biće reči i o tome. Ideja o revolucionarnom pristupu industriji nastala je
kao posledica eksponencijalnog razvoja tehnologija u poslednjih dvadeset
godina. Jednostavno, ljudi žele da sve ono što su otkrili pronađe svoju svrhu,
u punom potencijalu, gde god je to moguće. Taj proces iziskuje korenite
promene u svim sferama društva, a promene, naročito korenite, često
izazivaju mistifikaciju, strepnju ili oduševljenje.",
publisher = "Zaječar : Fakultet za menadžment",
journal = "IV Međunarodna naučna konferencija Regionalni razvoj i prekogranična saradnja : zbornik radova",
title = "Pametna fabrika kao centralna komponenta koncepta Industrije 4.0",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4151"
}

Milanović, D., Misita, M., Dabić, S.,& Petrović, N.. (2021). Pametna fabrika kao centralna komponenta koncepta Industrije 4.0. in IV Međunarodna naučna konferencija Regionalni razvoj i prekogranična saradnja : zbornik radova
Zaječar : Fakultet za menadžment..
https://hdl.handle.net/21.15107/rcub_machinery_4151

Milanović D, Misita M, Dabić S, Petrović N. Pametna fabrika kao centralna komponenta koncepta Industrije 4.0. in IV Međunarodna naučna konferencija Regionalni razvoj i prekogranična saradnja : zbornik radova. 2021;.
https://hdl.handle.net/21.15107/rcub_machinery_4151 .

Milanović, Dragan, Misita, Mirjana, Dabić, Svetlana, Petrović, Nikola, "Pametna fabrika kao centralna komponenta koncepta Industrije 4.0" in IV Međunarodna naučna konferencija Regionalni razvoj i prekogranična saradnja : zbornik radova (2021),
https://hdl.handle.net/21.15107/rcub_machinery_4151 .

TY  - CONF
AU  - Misita, Mirjana
AU  - Spasojević Brkić, Vesna
AU  - Milanović, Dragan
AU  - Perišić, Martina
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4120
AB  - The paper analyzes the importance of the application of methods and techniques of industrial engineering in the business environment of Industry 4.0. Survey done indicates that in the new business environment, the methods and techniques of industrial engineering come to full expression because cyberphysical systems give a complete insight into the nature of production processes. Accordingly, an example of an IE method application and ways of its integration in I4.0 environment is given and discussed.
PB  - Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad
C3  - X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings, Zrenjanin, 8-9th October 2020
T1  - Industrial engineering methods and techniques in Industry 4.0
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4120
ER  - 

@conference{
author = "Misita, Mirjana and Spasojević Brkić, Vesna and Milanović, Dragan and Perišić, Martina",
year = "2020",
abstract = "The paper analyzes the importance of the application of methods and techniques of industrial engineering in the business environment of Industry 4.0. Survey done indicates that in the new business environment, the methods and techniques of industrial engineering come to full expression because cyberphysical systems give a complete insight into the nature of production processes. Accordingly, an example of an IE method application and ways of its integration in I4.0 environment is given and discussed.",
publisher = "Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad",
journal = "X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings, Zrenjanin, 8-9th October 2020",
title = "Industrial engineering methods and techniques in Industry 4.0",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4120"
}

Misita, M., Spasojević Brkić, V., Milanović, D.,& Perišić, M.. (2020). Industrial engineering methods and techniques in Industry 4.0. in X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings, Zrenjanin, 8-9th October 2020
Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad..
https://hdl.handle.net/21.15107/rcub_machinery_4120

Misita M, Spasojević Brkić V, Milanović D, Perišić M. Industrial engineering methods and techniques in Industry 4.0. in X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings, Zrenjanin, 8-9th October 2020. 2020;.
https://hdl.handle.net/21.15107/rcub_machinery_4120 .

Misita, Mirjana, Spasojević Brkić, Vesna, Milanović, Dragan, Perišić, Martina, "Industrial engineering methods and techniques in Industry 4.0" in X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings, Zrenjanin, 8-9th October 2020 (2020),
https://hdl.handle.net/21.15107/rcub_machinery_4120 .

TY  - CONF
AU  - Tabašević, Ilija
AU  - Milanović, Dragan
AU  - Spasojević Brkić, Vesna
AU  - Misita, Mirjana
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4121
AB  - International Society for Pharmacoepidemiology has recently established a specific interest group Pharma 4.0, with the aim of adjusting the pharmaceutical industry to the Industry 4.0 concept. The aim of this study was to select the best strategy for bringing the temperature mapping in the pharmaceutical warehouses closer to Industry 4.0. For this reason, a temperature mapping was performed. Based on the analysis of the obtained
results, a choice of optimal locations for continual monitoring was enabled. The human role herein was overseeing the process and reacting should the process could be disrupted. Progressing towards the Pharma 4.0 concept
enabled the control of processes guided by the data from the internal sensors, which will in the future guide HVAC system. Relatedly, the way in which the process of controlling environmental conditions in the pharmaceutical
warehouses can be automatized as it is outlined in the paper.
PB  - Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad
C3  - X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings , Zrenjanin, 8-9th October 2020
T1  - Temperature mapping in pharmaceutical warehouse - framework for pharmacy 4.0
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4121
ER  - 

@conference{
author = "Tabašević, Ilija and Milanović, Dragan and Spasojević Brkić, Vesna and Misita, Mirjana",
year = "2020",
abstract = "International Society for Pharmacoepidemiology has recently established a specific interest group Pharma 4.0, with the aim of adjusting the pharmaceutical industry to the Industry 4.0 concept. The aim of this study was to select the best strategy for bringing the temperature mapping in the pharmaceutical warehouses closer to Industry 4.0. For this reason, a temperature mapping was performed. Based on the analysis of the obtained
results, a choice of optimal locations for continual monitoring was enabled. The human role herein was overseeing the process and reacting should the process could be disrupted. Progressing towards the Pharma 4.0 concept
enabled the control of processes guided by the data from the internal sensors, which will in the future guide HVAC system. Relatedly, the way in which the process of controlling environmental conditions in the pharmaceutical
warehouses can be automatized as it is outlined in the paper.",
publisher = "Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad",
journal = "X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings , Zrenjanin, 8-9th October 2020",
title = "Temperature mapping in pharmaceutical warehouse - framework for pharmacy 4.0",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4121"
}

Tabašević, I., Milanović, D., Spasojević Brkić, V.,& Misita, M.. (2020). Temperature mapping in pharmaceutical warehouse - framework for pharmacy 4.0. in X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings , Zrenjanin, 8-9th October 2020
Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad..
https://hdl.handle.net/21.15107/rcub_machinery_4121

Tabašević I, Milanović D, Spasojević Brkić V, Misita M. Temperature mapping in pharmaceutical warehouse - framework for pharmacy 4.0. in X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings , Zrenjanin, 8-9th October 2020. 2020;.
https://hdl.handle.net/21.15107/rcub_machinery_4121 .

Tabašević, Ilija, Milanović, Dragan, Spasojević Brkić, Vesna, Misita, Mirjana, "Temperature mapping in pharmaceutical warehouse - framework for pharmacy 4.0" in X International Conference Industrial Engineering and Environmental Protection (IIZS 2020) : Proceedings , Zrenjanin, 8-9th October 2020 (2020),
https://hdl.handle.net/21.15107/rcub_machinery_4121 .

TY  - CONF
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Borota-Tišma, Ankica
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4155
AB  - This paper presents decision-making model for maintenance strategy selection. Problem of right
maintenance strategy selection is one of the most important problem in manufacturing enterprises, process
industries or enterprises where failure of equipment has major impact on production flow, people, environment
or business costs. Presented decision making model for maintenance strategy selection takes into account risk
exposure to mechanical equipment failure, business costs, people health and environmental safety. At the other
hand each strategy options has its benefits expressed by cost savings. This decision making model for
maintenance strategy selection try to optimize between these opposite influential criteria.
PB  - Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad
C3  - IX International Conference Industrial Engineering and Environmental Protection 2019 (IIZS 2019)
T1  - Risk based maintenance strategy selection
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4155
ER  - 

@conference{
author = "Misita, Mirjana and Milanović, Dragan and Borota-Tišma, Ankica",
year = "2019",
abstract = "This paper presents decision-making model for maintenance strategy selection. Problem of right
maintenance strategy selection is one of the most important problem in manufacturing enterprises, process
industries or enterprises where failure of equipment has major impact on production flow, people, environment
or business costs. Presented decision making model for maintenance strategy selection takes into account risk
exposure to mechanical equipment failure, business costs, people health and environmental safety. At the other
hand each strategy options has its benefits expressed by cost savings. This decision making model for
maintenance strategy selection try to optimize between these opposite influential criteria.",
publisher = "Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad",
journal = "IX International Conference Industrial Engineering and Environmental Protection 2019 (IIZS 2019)",
title = "Risk based maintenance strategy selection",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4155"
}

Misita, M., Milanović, D.,& Borota-Tišma, A.. (2019). Risk based maintenance strategy selection. in IX International Conference Industrial Engineering and Environmental Protection 2019 (IIZS 2019)
Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad..
https://hdl.handle.net/21.15107/rcub_machinery_4155

Misita M, Milanović D, Borota-Tišma A. Risk based maintenance strategy selection. in IX International Conference Industrial Engineering and Environmental Protection 2019 (IIZS 2019). 2019;.
https://hdl.handle.net/21.15107/rcub_machinery_4155 .

Misita, Mirjana, Milanović, Dragan, Borota-Tišma, Ankica, "Risk based maintenance strategy selection" in IX International Conference Industrial Engineering and Environmental Protection 2019 (IIZS 2019) (2019),
https://hdl.handle.net/21.15107/rcub_machinery_4155 .

TY  - JOUR
AU  - Misita, Mirjana
AU  - Milanović, Dragan
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3202
AB  - Key elements of Industry 4.0 are collaborative innovation, comprehensive integration, IoT, data driven and organizational change. This paper focus is analysis organizational change in new business environment. Management system in industry 4.0 can be viewed through three cycles: strategy, element and management cycle. Strategy cycle addresses on developing sustainable competitiveness or new capability. Element cycle is based on data driven-technology, business process and organizational structure. Management cycle is based on leadership role. Element cycle is analyzed, concrete organizational structure transformation to minimum viable organization (MVO) and management support for this process. Steps, phases and concepts for achieving MVO are discussed in this paper.
PB  - Faculty of Engineering, University of Kragujevac
T2  - Proceedings on Engineering Sciences
T1  - Organizational and management change in industry 4.0
EP  - 432
IS  - 2
SP  - 427
VL  - 1
DO  - 10.24874/PES01.02.040
ER  - 

@article{
author = "Misita, Mirjana and Milanović, Dragan",
year = "2019",
abstract = "Key elements of Industry 4.0 are collaborative innovation, comprehensive integration, IoT, data driven and organizational change. This paper focus is analysis organizational change in new business environment. Management system in industry 4.0 can be viewed through three cycles: strategy, element and management cycle. Strategy cycle addresses on developing sustainable competitiveness or new capability. Element cycle is based on data driven-technology, business process and organizational structure. Management cycle is based on leadership role. Element cycle is analyzed, concrete organizational structure transformation to minimum viable organization (MVO) and management support for this process. Steps, phases and concepts for achieving MVO are discussed in this paper.",
publisher = "Faculty of Engineering, University of Kragujevac",
journal = "Proceedings on Engineering Sciences",
title = "Organizational and management change in industry 4.0",
pages = "432-427",
number = "2",
volume = "1",
doi = "10.24874/PES01.02.040"
}

Misita, M.,& Milanović, D.. (2019). Organizational and management change in industry 4.0. in Proceedings on Engineering Sciences
Faculty of Engineering, University of Kragujevac., 1(2), 427-432.
https://doi.org/10.24874/PES01.02.040

Misita M, Milanović D. Organizational and management change in industry 4.0. in Proceedings on Engineering Sciences. 2019;1(2):427-432.
doi:10.24874/PES01.02.040 .

Misita, Mirjana, Milanović, Dragan, "Organizational and management change in industry 4.0" in Proceedings on Engineering Sciences, 1, no. 2 (2019):427-432,
https://doi.org/10.24874/PES01.02.040 . .

TY  - CONF
AU  - Milanović, Dragan
AU  - Misita, Mirjana
AU  - Kefer, Petar
AU  - Borota-Tišma, Ankica
AU  - Milanović, Marija
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4129
AB  - U radu se istražuje strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije. Upravljanje lancima snabdevanja je proces dizajniranja, planiranja, izvršenja, kontrole i nadgledanja aktivnosti lanaca snabdevanja sa svrhom da se kreira neto vrednost, koja izgrađuje konkurentnu infrastrukturu, balansira internacionalnu logistiku, sinhronizuje snabdevanje sa potrebama i meri performansu poslovanja na globalnom nivou. Najbolje kompanije na svetu nalaze novi izvor konkurentne prednosti u upravljanju lancima snabdevanja, koji sadrži veliki broj aktivnosti koje su integrisane, kako bi proizvod ili usluga za što kraće vreme došli na tržište i zadovoljili potrebe kupca. Istraživanje definiše pet osnovnih postavki implementacije strategije upravljanja lancima snabdevanja sa stanovišta Lean distribucije.
PB  - Pirot : UO Privredna komora
C3  - III Međunarodna naučno-stručna konferencija Regionalni razvoj i saradnja : zbornik radova
T1  - Strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4129
ER  - 

@conference{
author = "Milanović, Dragan and Misita, Mirjana and Kefer, Petar and Borota-Tišma, Ankica and Milanović, Marija",
year = "2019",
abstract = "U radu se istražuje strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije. Upravljanje lancima snabdevanja je proces dizajniranja, planiranja, izvršenja, kontrole i nadgledanja aktivnosti lanaca snabdevanja sa svrhom da se kreira neto vrednost, koja izgrađuje konkurentnu infrastrukturu, balansira internacionalnu logistiku, sinhronizuje snabdevanje sa potrebama i meri performansu poslovanja na globalnom nivou. Najbolje kompanije na svetu nalaze novi izvor konkurentne prednosti u upravljanju lancima snabdevanja, koji sadrži veliki broj aktivnosti koje su integrisane, kako bi proizvod ili usluga za što kraće vreme došli na tržište i zadovoljili potrebe kupca. Istraživanje definiše pet osnovnih postavki implementacije strategije upravljanja lancima snabdevanja sa stanovišta Lean distribucije.",
publisher = "Pirot : UO Privredna komora",
journal = "III Međunarodna naučno-stručna konferencija Regionalni razvoj i saradnja : zbornik radova",
title = "Strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4129"
}

Milanović, D., Misita, M., Kefer, P., Borota-Tišma, A.,& Milanović, M.. (2019). Strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije. in III Međunarodna naučno-stručna konferencija Regionalni razvoj i saradnja : zbornik radova
Pirot : UO Privredna komora..
https://hdl.handle.net/21.15107/rcub_machinery_4129

Milanović D, Misita M, Kefer P, Borota-Tišma A, Milanović M. Strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije. in III Međunarodna naučno-stručna konferencija Regionalni razvoj i saradnja : zbornik radova. 2019;.
https://hdl.handle.net/21.15107/rcub_machinery_4129 .

Milanović, Dragan, Misita, Mirjana, Kefer, Petar, Borota-Tišma, Ankica, Milanović, Marija, "Strategijski pristup upravljanja lancima snabdevanja sa stanovišta Lean distribucije" in III Međunarodna naučno-stručna konferencija Regionalni razvoj i saradnja : zbornik radova (2019),
https://hdl.handle.net/21.15107/rcub_machinery_4129 .

TY  - JOUR
AU  - Tabašević, I.
AU  - Milanović, Dragan
PY  - 2019
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/3191
AB  - In the pharmaceutical industry, HVAC system qualification is carried out by applying a risk management model in accordance to relevant GMP requirements.Qualification of these systems is an integral part of quality assurance and represents a systemic approach of data collection and data analysis that will provide documentary evidence that the system works properly and continuously gives the expected results.GMP requires identifying the extent of the qualification required to ensure reliability and compliance with GMP principles based on the outcome of the risk assessment.This paper provides an example of risk assessment approach using the FMEA method.Potential risks were identified, it was estimated which risks were considered acceptable, and risk reduction actions were proposed, from their impact on the HVAC system.
PB  - Faculty of Engineering, University of Kragujevac
T2  - Proceedings on Engineering Sciences
T1  - Research of the scope of testing required for qualification of the hvac system
EP  - 562
IS  - 2
SP  - 553
VL  - 1
DO  - 10.24874/PES01.02.054
ER  - 

@article{
author = "Tabašević, I. and Milanović, Dragan",
year = "2019",
abstract = "In the pharmaceutical industry, HVAC system qualification is carried out by applying a risk management model in accordance to relevant GMP requirements.Qualification of these systems is an integral part of quality assurance and represents a systemic approach of data collection and data analysis that will provide documentary evidence that the system works properly and continuously gives the expected results.GMP requires identifying the extent of the qualification required to ensure reliability and compliance with GMP principles based on the outcome of the risk assessment.This paper provides an example of risk assessment approach using the FMEA method.Potential risks were identified, it was estimated which risks were considered acceptable, and risk reduction actions were proposed, from their impact on the HVAC system.",
publisher = "Faculty of Engineering, University of Kragujevac",
journal = "Proceedings on Engineering Sciences",
title = "Research of the scope of testing required for qualification of the hvac system",
pages = "562-553",
number = "2",
volume = "1",
doi = "10.24874/PES01.02.054"
}

Tabašević, I.,& Milanović, D.. (2019). Research of the scope of testing required for qualification of the hvac system. in Proceedings on Engineering Sciences
Faculty of Engineering, University of Kragujevac., 1(2), 553-562.
https://doi.org/10.24874/PES01.02.054

Tabašević I, Milanović D. Research of the scope of testing required for qualification of the hvac system. in Proceedings on Engineering Sciences. 2019;1(2):553-562.
doi:10.24874/PES01.02.054 .

Tabašević, I., Milanović, Dragan, "Research of the scope of testing required for qualification of the hvac system" in Proceedings on Engineering Sciences, 1, no. 2 (2019):553-562,
https://doi.org/10.24874/PES01.02.054 . .

TY  - CONF
AU  - Tabašević, Ilija
AU  - Milanović, Dragan
AU  - Misita, Mirjana
PY  - 2018
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4115
AB  - In the pharmaceutical industry, BMS qualifications are carried out by applying structures models for risk management, in accordance to relevant GMP requirements. In this paper, the FMEA method of risk analysis for assessing the scope and qualification level of the BMS was applied. FMEA is a desirable method for risk management in the pharmaceutical industry because it involves improved reliability, superior quality, increased security and it is based on understanding the processes and on knowledge of the characteristics of the system itself. Through this paper potential problems are identified, the level of risk is assessed, and actions to reduce or completely eliminate risks from their impact on the BMS are proposed.
PB  - Belgrade: Faculty of Mechanical Engineering
C3  - 7th International Symposium of Industrial Engineering - SIE : Proceedings; 2018, 27th-28th September, 2018, Belgrade
T1  - Assessment of the scope of testing required to qualification the BMS using FMEA methods
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4115
ER  - 

@conference{
author = "Tabašević, Ilija and Milanović, Dragan and Misita, Mirjana",
year = "2018",
abstract = "In the pharmaceutical industry, BMS qualifications are carried out by applying structures models for risk management, in accordance to relevant GMP requirements. In this paper, the FMEA method of risk analysis for assessing the scope and qualification level of the BMS was applied. FMEA is a desirable method for risk management in the pharmaceutical industry because it involves improved reliability, superior quality, increased security and it is based on understanding the processes and on knowledge of the characteristics of the system itself. Through this paper potential problems are identified, the level of risk is assessed, and actions to reduce or completely eliminate risks from their impact on the BMS are proposed.",
publisher = "Belgrade: Faculty of Mechanical Engineering",
journal = "7th International Symposium of Industrial Engineering - SIE : Proceedings; 2018, 27th-28th September, 2018, Belgrade",
title = "Assessment of the scope of testing required to qualification the BMS using FMEA methods",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4115"
}

Tabašević, I., Milanović, D.,& Misita, M.. (2018). Assessment of the scope of testing required to qualification the BMS using FMEA methods. in 7th International Symposium of Industrial Engineering - SIE : Proceedings; 2018, 27th-28th September, 2018, Belgrade
Belgrade: Faculty of Mechanical Engineering..
https://hdl.handle.net/21.15107/rcub_machinery_4115

Tabašević I, Milanović D, Misita M. Assessment of the scope of testing required to qualification the BMS using FMEA methods. in 7th International Symposium of Industrial Engineering - SIE : Proceedings; 2018, 27th-28th September, 2018, Belgrade. 2018;.
https://hdl.handle.net/21.15107/rcub_machinery_4115 .

Tabašević, Ilija, Milanović, Dragan, Misita, Mirjana, "Assessment of the scope of testing required to qualification the BMS using FMEA methods" in 7th International Symposium of Industrial Engineering - SIE : Proceedings; 2018, 27th-28th September, 2018, Belgrade (2018),
https://hdl.handle.net/21.15107/rcub_machinery_4115 .

TY  - JOUR
AU  - Tomić, Branislav
AU  - Spasojević Brkić, Vesna
AU  - Karapetrović, Stanislav
AU  - Pokrajac, Slobodan
AU  - Milanović, Dragan
AU  - Babić, Bojan
AU  - Djurdjević, Tijana
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2582
AB  - Unlike previous studies that have revealed a link between quality improvement programs and organizational culture typologies in individual companies, this study describes organizational culture dimensions that affect the use of quality improvement tools and methodologies and how both affect supply chain company performance. Structural equation modeling methods are applied to a sample of 200 organizations in the supply chain of a Canadian multinational company. The results show that employee promotion and investment constitutes the most influential cultural dimension. Organizational objectives and an employee reward system individually affect Kaizen. When the level of formalization in an organization is high, Kaizen and total quality management tools are used more intensively. When the level of formalization is low, lean manufacturing and internal audits are used more intensively. Superior communication in an organization causes plan-do-check-act approaches, lean manufacturing methods, corrective actions and internal audits to be used less intensively. Generally speaking, most quality improvement tools and methodologies positively influence business performance. These results suggest that organizations can improve business performance levels by selecting appropriate quality improvement programs depending on existing organizational culture dimensions and may thereby develop an organizational culture that enables successful quality improvements in a supply chain context.
PB  - Sage Publications Ltd, London
T2  - Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture
T1  - Organizational culture, quality improvement tools and methodologies, and business performance of a supply chain
EP  - +
IS  - 13
SP  - 2430
VL  - 231
DO  - 10.1177/0954405416629100
ER  - 

@article{
author = "Tomić, Branislav and Spasojević Brkić, Vesna and Karapetrović, Stanislav and Pokrajac, Slobodan and Milanović, Dragan and Babić, Bojan and Djurdjević, Tijana",
year = "2017",
abstract = "Unlike previous studies that have revealed a link between quality improvement programs and organizational culture typologies in individual companies, this study describes organizational culture dimensions that affect the use of quality improvement tools and methodologies and how both affect supply chain company performance. Structural equation modeling methods are applied to a sample of 200 organizations in the supply chain of a Canadian multinational company. The results show that employee promotion and investment constitutes the most influential cultural dimension. Organizational objectives and an employee reward system individually affect Kaizen. When the level of formalization in an organization is high, Kaizen and total quality management tools are used more intensively. When the level of formalization is low, lean manufacturing and internal audits are used more intensively. Superior communication in an organization causes plan-do-check-act approaches, lean manufacturing methods, corrective actions and internal audits to be used less intensively. Generally speaking, most quality improvement tools and methodologies positively influence business performance. These results suggest that organizations can improve business performance levels by selecting appropriate quality improvement programs depending on existing organizational culture dimensions and may thereby develop an organizational culture that enables successful quality improvements in a supply chain context.",
publisher = "Sage Publications Ltd, London",
journal = "Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture",
title = "Organizational culture, quality improvement tools and methodologies, and business performance of a supply chain",
pages = "+-2430",
number = "13",
volume = "231",
doi = "10.1177/0954405416629100"
}

Tomić, B., Spasojević Brkić, V., Karapetrović, S., Pokrajac, S., Milanović, D., Babić, B.,& Djurdjević, T.. (2017). Organizational culture, quality improvement tools and methodologies, and business performance of a supply chain. in Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture
Sage Publications Ltd, London., 231(13), 2430-+.
https://doi.org/10.1177/0954405416629100

Tomić B, Spasojević Brkić V, Karapetrović S, Pokrajac S, Milanović D, Babić B, Djurdjević T. Organizational culture, quality improvement tools and methodologies, and business performance of a supply chain. in Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 2017;231(13):2430-+.
doi:10.1177/0954405416629100 .

Tomić, Branislav, Spasojević Brkić, Vesna, Karapetrović, Stanislav, Pokrajac, Slobodan, Milanović, Dragan, Babić, Bojan, Djurdjević, Tijana, "Organizational culture, quality improvement tools and methodologies, and business performance of a supply chain" in Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 231, no. 13 (2017):2430-+,
https://doi.org/10.1177/0954405416629100 . .

TY  - CONF
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Pavlović, Sofija
AU  - Tadić, Danijela
AU  - Žunjić, Aleksandar
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4114
AB  - U ovom radu izložene su mogućnosti implementacije metoda za ocenu rizika u
lean konceptu upravljanja proizvodnim resursima. Lean upravljanje resursima bazira se na identifikaciji i otklanjanju nepotrebnih i neracionalnih aktivnosti u proizvodnom procesu, a upravo primenom metoda za ocenu rizika mogu da se identifikuju te aktivnosti. U radu je na konkretnom primeru iz proizvodne prakse, prikazana implementacija jedene od metoda za ocenu rizika u lean upravljanju proizvodnim resursima.
PB  - Univerzitet u Beogradu, Fakultet organizacionih nauka
C3  - XI Skup privrednika i naučnika SPIN ’17 Štedljivo (lean) upravljanje resursima u privredi republike Srbije : zbornik radova, Beograd, 09-10. novembar 2017
T1  - Model lean upravljanja proizvodnim resursima na bazi rizika
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4114
ER  - 

@conference{
author = "Misita, Mirjana and Milanović, Dragan and Pavlović, Sofija and Tadić, Danijela and Žunjić, Aleksandar",
year = "2017",
abstract = "U ovom radu izložene su mogućnosti implementacije metoda za ocenu rizika u
lean konceptu upravljanja proizvodnim resursima. Lean upravljanje resursima bazira se na identifikaciji i otklanjanju nepotrebnih i neracionalnih aktivnosti u proizvodnom procesu, a upravo primenom metoda za ocenu rizika mogu da se identifikuju te aktivnosti. U radu je na konkretnom primeru iz proizvodne prakse, prikazana implementacija jedene od metoda za ocenu rizika u lean upravljanju proizvodnim resursima.",
publisher = "Univerzitet u Beogradu, Fakultet organizacionih nauka",
journal = "XI Skup privrednika i naučnika SPIN ’17 Štedljivo (lean) upravljanje resursima u privredi republike Srbije : zbornik radova, Beograd, 09-10. novembar 2017",
title = "Model lean upravljanja proizvodnim resursima na bazi rizika",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4114"
}

Misita, M., Milanović, D., Pavlović, S., Tadić, D.,& Žunjić, A.. (2017). Model lean upravljanja proizvodnim resursima na bazi rizika. in XI Skup privrednika i naučnika SPIN ’17 Štedljivo (lean) upravljanje resursima u privredi republike Srbije : zbornik radova, Beograd, 09-10. novembar 2017
Univerzitet u Beogradu, Fakultet organizacionih nauka..
https://hdl.handle.net/21.15107/rcub_machinery_4114

Misita M, Milanović D, Pavlović S, Tadić D, Žunjić A. Model lean upravljanja proizvodnim resursima na bazi rizika. in XI Skup privrednika i naučnika SPIN ’17 Štedljivo (lean) upravljanje resursima u privredi republike Srbije : zbornik radova, Beograd, 09-10. novembar 2017. 2017;.
https://hdl.handle.net/21.15107/rcub_machinery_4114 .

Misita, Mirjana, Milanović, Dragan, Pavlović, Sofija, Tadić, Danijela, Žunjić, Aleksandar, "Model lean upravljanja proizvodnim resursima na bazi rizika" in XI Skup privrednika i naučnika SPIN ’17 Štedljivo (lean) upravljanje resursima u privredi republike Srbije : zbornik radova, Beograd, 09-10. novembar 2017 (2017),
https://hdl.handle.net/21.15107/rcub_machinery_4114 .

TY  - CONF
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Dragojlović, Predrag
AU  - Žunjić, Aleksandar
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4128
AB  - The paper reports investigation on the integration methods for risk management and multiple criteria decision making (MCDM) of production program for achieving better business results as well as mitigating business risks. Multiple criteria decision making was used to define the business strategy variant of production program. The starting point in defining the model of risk management integration for the choice of production program was to define the objective function and real constraints. It is found that the application of quantitative methods for risk assessment, i.e. Bayesian Network, for calculating total risk score more precisely describe a real state-of-art of the system compared to other risk assessment methods.
Implementation of the integrated model for risk management and MCDM in manufacturing enterprises increases the quality of decision-making, because for all possible production program variant, profit and total risk are calculated and used to conclusively choose the variant with a highest revenue and lowest risk for production loss occurrence.
PB  - Faculty of Engineering, University of Kragujevac
C3  - 2nd International conference on Quality of Life : Conference manual, June 08th -10th 2017, Kragujevac
T1  - Risk management and multiple criteria decision making of entreprise production program
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4128
ER  - 

@conference{
author = "Misita, Mirjana and Milanović, Dragan and Dragojlović, Predrag and Žunjić, Aleksandar",
year = "2017",
abstract = "The paper reports investigation on the integration methods for risk management and multiple criteria decision making (MCDM) of production program for achieving better business results as well as mitigating business risks. Multiple criteria decision making was used to define the business strategy variant of production program. The starting point in defining the model of risk management integration for the choice of production program was to define the objective function and real constraints. It is found that the application of quantitative methods for risk assessment, i.e. Bayesian Network, for calculating total risk score more precisely describe a real state-of-art of the system compared to other risk assessment methods.
Implementation of the integrated model for risk management and MCDM in manufacturing enterprises increases the quality of decision-making, because for all possible production program variant, profit and total risk are calculated and used to conclusively choose the variant with a highest revenue and lowest risk for production loss occurrence.",
publisher = "Faculty of Engineering, University of Kragujevac",
journal = "2nd International conference on Quality of Life : Conference manual, June 08th -10th 2017, Kragujevac",
title = "Risk management and multiple criteria decision making of entreprise production program",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4128"
}

Misita, M., Milanović, D., Dragojlović, P.,& Žunjić, A.. (2017). Risk management and multiple criteria decision making of entreprise production program. in 2nd International conference on Quality of Life : Conference manual, June 08th -10th 2017, Kragujevac
Faculty of Engineering, University of Kragujevac..
https://hdl.handle.net/21.15107/rcub_machinery_4128

Misita M, Milanović D, Dragojlović P, Žunjić A. Risk management and multiple criteria decision making of entreprise production program. in 2nd International conference on Quality of Life : Conference manual, June 08th -10th 2017, Kragujevac. 2017;.
https://hdl.handle.net/21.15107/rcub_machinery_4128 .

Misita, Mirjana, Milanović, Dragan, Dragojlović, Predrag, Žunjić, Aleksandar, "Risk management and multiple criteria decision making of entreprise production program" in 2nd International conference on Quality of Life : Conference manual, June 08th -10th 2017, Kragujevac (2017),
https://hdl.handle.net/21.15107/rcub_machinery_4128 .

TY  - JOUR
AU  - Rusov, Jelena
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Milanović, Dragan
PY  - 2017
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2598
AB  - Za savremenu poslovnu praksu rezultati predviđanja poslovanja su od suštinskog značaja za evaluaciju buduće finansijske efikasnosti preduzeća. Postupak planiranja i predviđanja naročito je značajan za preduzeća koja posluju u uslovima neizvesnosti. U radu je izložen primer planiranja i predviđanja poslovnih rezultata u osiguranju prilikom proračuna trenda premije linearnom i nelinearnom regresijom. Zbog neizvesnosti koja prati trenutak nastanka i iznosa štete neophodno je osigurati dovoljno sredstava za pokriće rizika. Za usklađivanje sredstava i obaveza potrebno je predvideti buduće kretanje premije po vrstama osiguranja, što čini osnovni koncept razvoja i poslovanja osiguravajućih društava.
AB  - In terms of modern business practice, business prediction results are crucially important for evaluation of future financial performance of a company. Planning and prediction procedures are especially important for companies operating under uncertainty. This paper shows an example of planning and prediction of business results in insurance when calculating premium trend by use of linear and nonlinear regression. Due to the uncertainty associated with the moment of claim occurrence and claim amount, it is necessary to secure enough assets to cover the risks. Asset-liability matching requires the prediction of future premium movement per insurance lines which represents the basic concept of development and operation of insurance companies.
PB  - Univerzitet u Beogradu - Mašinski fakultet, Beograd
T2  - FME Transactions
T1  - Predviđanje poslovnih rezultata primenom regresionih modela
T1  - Applying regression models to predict business results
EP  - 202
IS  - 1
SP  - 198
VL  - 45
DO  - 10.5937/fmet1701198R
ER  - 

@article{
author = "Rusov, Jelena and Misita, Mirjana and Milanović, Dragan and Milanović, Dragan",
year = "2017",
abstract = "Za savremenu poslovnu praksu rezultati predviđanja poslovanja su od suštinskog značaja za evaluaciju buduće finansijske efikasnosti preduzeća. Postupak planiranja i predviđanja naročito je značajan za preduzeća koja posluju u uslovima neizvesnosti. U radu je izložen primer planiranja i predviđanja poslovnih rezultata u osiguranju prilikom proračuna trenda premije linearnom i nelinearnom regresijom. Zbog neizvesnosti koja prati trenutak nastanka i iznosa štete neophodno je osigurati dovoljno sredstava za pokriće rizika. Za usklađivanje sredstava i obaveza potrebno je predvideti buduće kretanje premije po vrstama osiguranja, što čini osnovni koncept razvoja i poslovanja osiguravajućih društava., In terms of modern business practice, business prediction results are crucially important for evaluation of future financial performance of a company. Planning and prediction procedures are especially important for companies operating under uncertainty. This paper shows an example of planning and prediction of business results in insurance when calculating premium trend by use of linear and nonlinear regression. Due to the uncertainty associated with the moment of claim occurrence and claim amount, it is necessary to secure enough assets to cover the risks. Asset-liability matching requires the prediction of future premium movement per insurance lines which represents the basic concept of development and operation of insurance companies.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd",
journal = "FME Transactions",
title = "Predviđanje poslovnih rezultata primenom regresionih modela, Applying regression models to predict business results",
pages = "202-198",
number = "1",
volume = "45",
doi = "10.5937/fmet1701198R"
}

Rusov, J., Misita, M., Milanović, D.,& Milanović, D.. (2017). Predviđanje poslovnih rezultata primenom regresionih modela. in FME Transactions
Univerzitet u Beogradu - Mašinski fakultet, Beograd., 45(1), 198-202.
https://doi.org/10.5937/fmet1701198R

Rusov J, Misita M, Milanović D, Milanović D. Predviđanje poslovnih rezultata primenom regresionih modela. in FME Transactions. 2017;45(1):198-202.
doi:10.5937/fmet1701198R .

Rusov, Jelena, Misita, Mirjana, Milanović, Dragan, Milanović, Dragan, "Predviđanje poslovnih rezultata primenom regresionih modela" in FME Transactions, 45, no. 1 (2017):198-202,
https://doi.org/10.5937/fmet1701198R . .

TY  - JOUR
AU  - Misita, Mirjana
AU  - Lapcević, Nebojša
AU  - Tadić, Danijela
AU  - Milanović, Dragan
AU  - Borota-Tisma, Ankica
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2411
AB  - This article presents new model of enterprises resource planning implementation planning process in manufacturing enterprises based on assessment of risk sources. This assessment was performed by applying analytic hierarchy process. Analytic hierarchy process method allows variation of relative importance of specific risk sources dependent on the section from which the risk source originates (organizational environment, technical issues, people issues, adoption process management, and external support). Survey was conducted on 85 manufacturing enterprises involved with an enterprises resource planning solution. Ranking of risk sources assessments returns most frequent risks of enterprises resource planning implementation success in manufacturing enterprises, and representative factors were isolated through factor analysis by risk source origin. Finally, results indicate that there are hidden causes of failed implementation, for example, risk source "top management training and education," from risk origin "adoption process management."
PB  - Sage Publications Ltd, London
T2  - Advances in Mechanical Engineering
T1  - New model of enterprises resource planning implementation planning process in manufacturing enterprises
IS  - 5
VL  - 8
DO  - 10.1177/1687814016646263
ER  - 

@article{
author = "Misita, Mirjana and Lapcević, Nebojša and Tadić, Danijela and Milanović, Dragan and Borota-Tisma, Ankica",
year = "2016",
abstract = "This article presents new model of enterprises resource planning implementation planning process in manufacturing enterprises based on assessment of risk sources. This assessment was performed by applying analytic hierarchy process. Analytic hierarchy process method allows variation of relative importance of specific risk sources dependent on the section from which the risk source originates (organizational environment, technical issues, people issues, adoption process management, and external support). Survey was conducted on 85 manufacturing enterprises involved with an enterprises resource planning solution. Ranking of risk sources assessments returns most frequent risks of enterprises resource planning implementation success in manufacturing enterprises, and representative factors were isolated through factor analysis by risk source origin. Finally, results indicate that there are hidden causes of failed implementation, for example, risk source "top management training and education," from risk origin "adoption process management."",
publisher = "Sage Publications Ltd, London",
journal = "Advances in Mechanical Engineering",
title = "New model of enterprises resource planning implementation planning process in manufacturing enterprises",
number = "5",
volume = "8",
doi = "10.1177/1687814016646263"
}

Misita, M., Lapcević, N., Tadić, D., Milanović, D.,& Borota-Tisma, A.. (2016). New model of enterprises resource planning implementation planning process in manufacturing enterprises. in Advances in Mechanical Engineering
Sage Publications Ltd, London., 8(5).
https://doi.org/10.1177/1687814016646263

Misita M, Lapcević N, Tadić D, Milanović D, Borota-Tisma A. New model of enterprises resource planning implementation planning process in manufacturing enterprises. in Advances in Mechanical Engineering. 2016;8(5).
doi:10.1177/1687814016646263 .

Misita, Mirjana, Lapcević, Nebojša, Tadić, Danijela, Milanović, Dragan, Borota-Tisma, Ankica, "New model of enterprises resource planning implementation planning process in manufacturing enterprises" in Advances in Mechanical Engineering, 8, no. 5 (2016),
https://doi.org/10.1177/1687814016646263 . .

TY  - JOUR
AU  - Kefer, Petar
AU  - Milanović, Dragan
AU  - Misita, Mirjana
AU  - Žunjić, Aleksandar
PY  - 2016
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2308
AB  - The determination of the optimal purchasing strategy in enterprise that is a part of global supply chain could be performed in two steps. In step one, a classification of potential suppliers is performed in order to determine the optimal portfolio of suppliers. This is delivered by using the fuzzy multicriteria proposed ABC classification method. Uncertainties in relative importance of criteria and their values are described by linguistic expressions. Modelling of linguistic expressions is based on the fuzzy sets theory. In the second step, ranking of optimal portfolio of suppliers is performed by using the modified ELECTRE method. The obtained results represent valuable input for determining the long time purchasing strategy and building partnership with the best suppliers. The developed two-step model is verified on real life data. The obtained results indicate good compliance with the opinions management in this type of industry. It is worth to mention that the proposed model can be easily extended and adopted to the analysis of other issues of management which could be applicable in different research areas.
PB  - Hindawi Ltd, London
T2  - Mathematical Problems in Engineering
T1  - Fuzzy Multicriteria ABC Supplier Classification in Global Supply Chain
VL  - 2016
DO  - 10.1155/2016/9139483
ER  - 

@article{
author = "Kefer, Petar and Milanović, Dragan and Misita, Mirjana and Žunjić, Aleksandar",
year = "2016",
abstract = "The determination of the optimal purchasing strategy in enterprise that is a part of global supply chain could be performed in two steps. In step one, a classification of potential suppliers is performed in order to determine the optimal portfolio of suppliers. This is delivered by using the fuzzy multicriteria proposed ABC classification method. Uncertainties in relative importance of criteria and their values are described by linguistic expressions. Modelling of linguistic expressions is based on the fuzzy sets theory. In the second step, ranking of optimal portfolio of suppliers is performed by using the modified ELECTRE method. The obtained results represent valuable input for determining the long time purchasing strategy and building partnership with the best suppliers. The developed two-step model is verified on real life data. The obtained results indicate good compliance with the opinions management in this type of industry. It is worth to mention that the proposed model can be easily extended and adopted to the analysis of other issues of management which could be applicable in different research areas.",
publisher = "Hindawi Ltd, London",
journal = "Mathematical Problems in Engineering",
title = "Fuzzy Multicriteria ABC Supplier Classification in Global Supply Chain",
volume = "2016",
doi = "10.1155/2016/9139483"
}

Kefer, P., Milanović, D., Misita, M.,& Žunjić, A.. (2016). Fuzzy Multicriteria ABC Supplier Classification in Global Supply Chain. in Mathematical Problems in Engineering
Hindawi Ltd, London., 2016.
https://doi.org/10.1155/2016/9139483

Kefer P, Milanović D, Misita M, Žunjić A. Fuzzy Multicriteria ABC Supplier Classification in Global Supply Chain. in Mathematical Problems in Engineering. 2016;2016.
doi:10.1155/2016/9139483 .

Kefer, Petar, Milanović, Dragan, Misita, Mirjana, Žunjić, Aleksandar, "Fuzzy Multicriteria ABC Supplier Classification in Global Supply Chain" in Mathematical Problems in Engineering, 2016 (2016),
https://doi.org/10.1155/2016/9139483 . .

TY  - JOUR
AU  - Spasojević Brkić, Vesna
AU  - Golubović, Tamara
AU  - Milanović, Dragan
AU  - Brkić, Aleksandar
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/2033
AB  - Cilj ovog rada je primena metode zasnovane na viševarijantnoj statističkoj tehnici u cilju određivanja kritičnih dimenzija kabine krana, sa maksimalnom ergonomskom prilagođenošću radi smeštaja što šireg opsega populacije i veće bezbednosti rada. Korišćena je viševarijantna tehnika - faktorska analiza. Rezultati ovog istraživanja sprovedenog na uzorku 83 operatora pokazuju da se faktorskom analizom veći broj faktora raspoređuje u trodimenzionalnom prostoru. Rezultati ovog rada omogućavaju projektantima rešavanje dilema, a zahvaljujući rezultatima ovog rada mogu se projektovati kabine krana sa manje stresnim položajem operatera i povećanom produktivnosti i bezbednosti.
AB  - Purpose of this paper is application of method based on multivariate statistical technique in order to determine critical dimensions of the crane cabin, which would maximize adjustability and ergonomics of the product, resulting in accommodation of wider range of the population and greater safety while operating. Multivariate statistical technique used for this purpose is factor analysis. Results of this research, conducted on a sample consisted of 83 crane cabin operators, showed that while designing a working space critical anthropomeasures take three-dimensional space, while their influence contributions in each dimension are determined with factor analysis. Results of this work are expected to be useful for industry in a way such that crane cabins' designers can troubleshoot the dilemmas they encounter in their job. Using findings of this survey might lead to new designs of cabins that will offer less strenuous postures of operator, which consequently will improve productivity and safety.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Identifikacija faktora antropomera operatera kranova
T1  - Crane operators' anthropomeasures factors identification
EP  - 164
IS  - 2
SP  - 159
VL  - 12
DO  - 10.5937/jaes12-5409
ER  - 

@article{
author = "Spasojević Brkić, Vesna and Golubović, Tamara and Milanović, Dragan and Brkić, Aleksandar",
year = "2014",
abstract = "Cilj ovog rada je primena metode zasnovane na viševarijantnoj statističkoj tehnici u cilju određivanja kritičnih dimenzija kabine krana, sa maksimalnom ergonomskom prilagođenošću radi smeštaja što šireg opsega populacije i veće bezbednosti rada. Korišćena je viševarijantna tehnika - faktorska analiza. Rezultati ovog istraživanja sprovedenog na uzorku 83 operatora pokazuju da se faktorskom analizom veći broj faktora raspoređuje u trodimenzionalnom prostoru. Rezultati ovog rada omogućavaju projektantima rešavanje dilema, a zahvaljujući rezultatima ovog rada mogu se projektovati kabine krana sa manje stresnim položajem operatera i povećanom produktivnosti i bezbednosti., Purpose of this paper is application of method based on multivariate statistical technique in order to determine critical dimensions of the crane cabin, which would maximize adjustability and ergonomics of the product, resulting in accommodation of wider range of the population and greater safety while operating. Multivariate statistical technique used for this purpose is factor analysis. Results of this research, conducted on a sample consisted of 83 crane cabin operators, showed that while designing a working space critical anthropomeasures take three-dimensional space, while their influence contributions in each dimension are determined with factor analysis. Results of this work are expected to be useful for industry in a way such that crane cabins' designers can troubleshoot the dilemmas they encounter in their job. Using findings of this survey might lead to new designs of cabins that will offer less strenuous postures of operator, which consequently will improve productivity and safety.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Identifikacija faktora antropomera operatera kranova, Crane operators' anthropomeasures factors identification",
pages = "164-159",
number = "2",
volume = "12",
doi = "10.5937/jaes12-5409"
}

Spasojević Brkić, V., Golubović, T., Milanović, D.,& Brkić, A.. (2014). Identifikacija faktora antropomera operatera kranova. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 12(2), 159-164.
https://doi.org/10.5937/jaes12-5409

Spasojević Brkić V, Golubović T, Milanović D, Brkić A. Identifikacija faktora antropomera operatera kranova. in Journal of Applied Engineering Science. 2014;12(2):159-164.
doi:10.5937/jaes12-5409 .

Spasojević Brkić, Vesna, Golubović, Tamara, Milanović, Dragan, Brkić, Aleksandar, "Identifikacija faktora antropomera operatera kranova" in Journal of Applied Engineering Science, 12, no. 2 (2014):159-164,
https://doi.org/10.5937/jaes12-5409 . .

TY  - JOUR
AU  - Tadić, Danijela
AU  - Savović, Ivan
AU  - Misita, Mirjana
AU  - Arsovski, Slavko
AU  - Milanović, Dragan
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1998
AB  - Inherent safety is a proactive approach for loss or elimination of hazard values and risk management. Expansion of safety relating to process and production in a supply chain in an uncertain environment has a critical effect on the competitive advantage of each food industrial organization. In this article, the fuzzy rating weights of each pair of the considered hazards and uncertain hazard values are described by linguistic expressions modelled by triangular fuzzy numbers. The fuzzy extent approach for the synthetic extent values of the pairwise comparison for handling fuzzy analytic hierarchical process is used to calculate the weight vector. The proposed fuzzy model is arranged in a hierarchical structure, so that the output of one interference system is used as an input for the second interference step. In the first of interference steps, the total hazard value for each identified process is calculated using the fuzzy algebra rules. In the second interference step, the inherent safety index for each process is determined on the basis of total hazard value, using the IF-THEN fuzzy logic rules. It is shown that the proposed fuzzy model is highly suitable as a decision making tool for making decisions about the inherent safety index of food industrial processes.
PB  - Sage Publications Ltd, London
T2  - Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineer
T1  - Development of a fuzzy logic-based inherent safety index for food industries
EP  - 13
IS  - 1
SP  - 3
VL  - 228
DO  - 10.1177/0954408912466368
ER  - 

@article{
author = "Tadić, Danijela and Savović, Ivan and Misita, Mirjana and Arsovski, Slavko and Milanović, Dragan",
year = "2014",
abstract = "Inherent safety is a proactive approach for loss or elimination of hazard values and risk management. Expansion of safety relating to process and production in a supply chain in an uncertain environment has a critical effect on the competitive advantage of each food industrial organization. In this article, the fuzzy rating weights of each pair of the considered hazards and uncertain hazard values are described by linguistic expressions modelled by triangular fuzzy numbers. The fuzzy extent approach for the synthetic extent values of the pairwise comparison for handling fuzzy analytic hierarchical process is used to calculate the weight vector. The proposed fuzzy model is arranged in a hierarchical structure, so that the output of one interference system is used as an input for the second interference step. In the first of interference steps, the total hazard value for each identified process is calculated using the fuzzy algebra rules. In the second interference step, the inherent safety index for each process is determined on the basis of total hazard value, using the IF-THEN fuzzy logic rules. It is shown that the proposed fuzzy model is highly suitable as a decision making tool for making decisions about the inherent safety index of food industrial processes.",
publisher = "Sage Publications Ltd, London",
journal = "Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineer",
title = "Development of a fuzzy logic-based inherent safety index for food industries",
pages = "13-3",
number = "1",
volume = "228",
doi = "10.1177/0954408912466368"
}

Tadić, D., Savović, I., Misita, M., Arsovski, S.,& Milanović, D.. (2014). Development of a fuzzy logic-based inherent safety index for food industries. in Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineer
Sage Publications Ltd, London., 228(1), 3-13.
https://doi.org/10.1177/0954408912466368

Tadić D, Savović I, Misita M, Arsovski S, Milanović D. Development of a fuzzy logic-based inherent safety index for food industries. in Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineer. 2014;228(1):3-13.
doi:10.1177/0954408912466368 .

Tadić, Danijela, Savović, Ivan, Misita, Mirjana, Arsovski, Slavko, Milanović, Dragan, "Development of a fuzzy logic-based inherent safety index for food industries" in Proceedings of The Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineer, 228, no. 1 (2014):3-13,
https://doi.org/10.1177/0954408912466368 . .

TY  - JOUR
AU  - Tadić, Danijela
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Djukić, Tijana
AU  - Senussi, Galal H.
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1896
AB  - Continuous business process improvement is a well-known strategy referred to as the Japanese approach to industrial production. Nowadays, it presents one of the basic requirements set by the ISO 9004:2000 standard. A new fuzzy model based on the Ishikawa diagram is proposed, whereby the rank of business losses of the main process at the manufacturing company level is determined, respecting the values of identified causes that lead to the formation of business losses, as well as their relative importance. In this article, it is assumed that the relative importance and values of causes are determined by descriptive linguistic expressions. The linguistic expressions are obtained by the fuzzy rating of a management team. The proposed algorithm determines the business losses with the highest possibility of occurrence and calculates the degrees of beliefs that some business losses are more likely to happen than the others. Real-life industrial data on small and medium companies operating in central Serbia and numerical examples are given to illustrate the method.
PB  - Sage Publications Ltd, London
T2  - Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture
T1  - A novel approach to process improvement in small and medium manufacturing enterprises
EP  - 789
IS  - 5
SP  - 777
VL  - 228
DO  - 10.1177/0954405413508768
ER  - 

@article{
author = "Tadić, Danijela and Misita, Mirjana and Milanović, Dragan and Djukić, Tijana and Senussi, Galal H.",
year = "2014",
abstract = "Continuous business process improvement is a well-known strategy referred to as the Japanese approach to industrial production. Nowadays, it presents one of the basic requirements set by the ISO 9004:2000 standard. A new fuzzy model based on the Ishikawa diagram is proposed, whereby the rank of business losses of the main process at the manufacturing company level is determined, respecting the values of identified causes that lead to the formation of business losses, as well as their relative importance. In this article, it is assumed that the relative importance and values of causes are determined by descriptive linguistic expressions. The linguistic expressions are obtained by the fuzzy rating of a management team. The proposed algorithm determines the business losses with the highest possibility of occurrence and calculates the degrees of beliefs that some business losses are more likely to happen than the others. Real-life industrial data on small and medium companies operating in central Serbia and numerical examples are given to illustrate the method.",
publisher = "Sage Publications Ltd, London",
journal = "Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture",
title = "A novel approach to process improvement in small and medium manufacturing enterprises",
pages = "789-777",
number = "5",
volume = "228",
doi = "10.1177/0954405413508768"
}

Tadić, D., Misita, M., Milanović, D., Djukić, T.,& Senussi, G. H.. (2014). A novel approach to process improvement in small and medium manufacturing enterprises. in Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture
Sage Publications Ltd, London., 228(5), 777-789.
https://doi.org/10.1177/0954405413508768

Tadić D, Misita M, Milanović D, Djukić T, Senussi GH. A novel approach to process improvement in small and medium manufacturing enterprises. in Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 2014;228(5):777-789.
doi:10.1177/0954405413508768 .

Tadić, Danijela, Misita, Mirjana, Milanović, Dragan, Djukić, Tijana, Senussi, Galal H., "A novel approach to process improvement in small and medium manufacturing enterprises" in Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 228, no. 5 (2014):777-789,
https://doi.org/10.1177/0954405413508768 . .

TY  - JOUR
AU  - Jovanović, Jelena R.
AU  - Milanović, Dragan
AU  - Djukić, Radisav D.
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1882
AB  - This paper reports the results of investigations on manufacturing cycle times for special-purpose products. The company performs serial production characterized by complex and diverse technologies, alternative solutions and combined modes of workpiece movement in the manufacturing process. Because of various approaches to this problem, an analysis of previous investigations has been carried out, and a theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. The technological and production documentation of the company has been analysed to establish the technological and real manufacturing cycle times, total losses and flow coefficients. This paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization levels and causes of loss, in order to measure their effects and to reduce the flow coefficient to an optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in the company in the period from 2010 to 2012.
PB  - Assoc Mechanical Engineers Technicians Slovenia, Ljubljana
T2  - Strojniski Vestnik-Journal of Mechanical Engineering
T1  - Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration
EP  - 524
IS  - 7-8
SP  - 512
VL  - 60
DO  - 10.5545/sv-jme.2013.1523
ER  - 

@article{
author = "Jovanović, Jelena R. and Milanović, Dragan and Djukić, Radisav D.",
year = "2014",
abstract = "This paper reports the results of investigations on manufacturing cycle times for special-purpose products. The company performs serial production characterized by complex and diverse technologies, alternative solutions and combined modes of workpiece movement in the manufacturing process. Because of various approaches to this problem, an analysis of previous investigations has been carried out, and a theoretical base is provided for the technological cycle and factors affecting the manufacturing cycle time. The technological and production documentation of the company has been analysed to establish the technological and real manufacturing cycle times, total losses and flow coefficients. This paper describes the original approach to production cycle scheduling on the grounds of investigations of manufacturing capacity utilization levels and causes of loss, in order to measure their effects and to reduce the flow coefficient to an optimum level. The results are a segment of complex studies on the production cycle management of complex products, accomplished in the company in the period from 2010 to 2012.",
publisher = "Assoc Mechanical Engineers Technicians Slovenia, Ljubljana",
journal = "Strojniski Vestnik-Journal of Mechanical Engineering",
title = "Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration",
pages = "524-512",
number = "7-8",
volume = "60",
doi = "10.5545/sv-jme.2013.1523"
}

Jovanović, J. R., Milanović, D.,& Djukić, R. D.. (2014). Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration. in Strojniski Vestnik-Journal of Mechanical Engineering
Assoc Mechanical Engineers Technicians Slovenia, Ljubljana., 60(7-8), 512-524.
https://doi.org/10.5545/sv-jme.2013.1523

Jovanović JR, Milanović D, Djukić RD. Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration. in Strojniski Vestnik-Journal of Mechanical Engineering. 2014;60(7-8):512-524.
doi:10.5545/sv-jme.2013.1523 .

Jovanović, Jelena R., Milanović, Dragan, Djukić, Radisav D., "Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration" in Strojniski Vestnik-Journal of Mechanical Engineering, 60, no. 7-8 (2014):512-524,
https://doi.org/10.5545/sv-jme.2013.1523 . .

TY  - JOUR
AU  - Puškarić, Hrvoje
AU  - Tadić, Danijela
AU  - Misita, Mirjana
AU  - Stefanović, Miladin
AU  - Milanović, Dragan
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1742
AB  - Poboljšanje poslovnih procesa ostvaruje se između ostalog poboljšanjem ciljeva kvaliteta koji su definisani na nivou svakog procesa. U praksi nije moguće da se istovremeno izvrši poboljšanje svih identifikovanih ciljeva kvaliteta. Neophodno je da vrednosti ciljeva kvaliteta budu određene primenom odgovarajuće metrike. Prema dobijenim vrednostima ciljeva kvaliteta, menadžment tim određuje redosled poboljšanja ciljeva kvaliteta. U ovom radu, relativan odnos važnosti svakog para identifikovanih ciljeva kvaliteta zadat je u matričnom obliku. Performanse ciljeva kvaliteta su opisane pomoću lingvističkih iskaza. Svi lingvistički iskazi su modelirani trougaonim fazi brojevima. Nov model za ocenu vrednosti ciljeva kvaliteta sa respektovanjem njihove relativne važnosti je predložen. Razvijeni model je testiran ilustrativnim primerom u kome egzistiraju podaci procesa razvoja jednog preduzeća koje funkcioniše u realnom okruženju.
AB  - Improvement of business processes is achieved, among the other, through improvement of quality goals which are defined on the level of each process. In practice, it is not possible to improve all identified quality goals simultaneously. It is assumed that it is necessary that the quality goals values be determined by applying determined metrics. With respect to given values of quality goals, management team determines the order by which quality goals are improved. In this paper, the relative importance of quality goals is stated by fuzzy pair-wise comparison matrix. The performances of quality goals are described by linguistic expressions. All linguistic expressions are modeled by triangular fuzzy numbers. The new model for evaluation of quality goal values with respect to their relative importance is proposed. The developed model is tested by illustrative example with real life data of development process.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Ocena performansi ciljeva kvaliteta na nivou procesa u neizvesnom okruženju
T1  - The evaluation of quality goals at the process level in a uncertain environment
EP  - 38
IS  - 1
SP  - 31
VL  - 11
DO  - 10.5937/jaes11-3271
ER  - 

@article{
author = "Puškarić, Hrvoje and Tadić, Danijela and Misita, Mirjana and Stefanović, Miladin and Milanović, Dragan",
year = "2013",
abstract = "Poboljšanje poslovnih procesa ostvaruje se između ostalog poboljšanjem ciljeva kvaliteta koji su definisani na nivou svakog procesa. U praksi nije moguće da se istovremeno izvrši poboljšanje svih identifikovanih ciljeva kvaliteta. Neophodno je da vrednosti ciljeva kvaliteta budu određene primenom odgovarajuće metrike. Prema dobijenim vrednostima ciljeva kvaliteta, menadžment tim određuje redosled poboljšanja ciljeva kvaliteta. U ovom radu, relativan odnos važnosti svakog para identifikovanih ciljeva kvaliteta zadat je u matričnom obliku. Performanse ciljeva kvaliteta su opisane pomoću lingvističkih iskaza. Svi lingvistički iskazi su modelirani trougaonim fazi brojevima. Nov model za ocenu vrednosti ciljeva kvaliteta sa respektovanjem njihove relativne važnosti je predložen. Razvijeni model je testiran ilustrativnim primerom u kome egzistiraju podaci procesa razvoja jednog preduzeća koje funkcioniše u realnom okruženju., Improvement of business processes is achieved, among the other, through improvement of quality goals which are defined on the level of each process. In practice, it is not possible to improve all identified quality goals simultaneously. It is assumed that it is necessary that the quality goals values be determined by applying determined metrics. With respect to given values of quality goals, management team determines the order by which quality goals are improved. In this paper, the relative importance of quality goals is stated by fuzzy pair-wise comparison matrix. The performances of quality goals are described by linguistic expressions. All linguistic expressions are modeled by triangular fuzzy numbers. The new model for evaluation of quality goal values with respect to their relative importance is proposed. The developed model is tested by illustrative example with real life data of development process.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Ocena performansi ciljeva kvaliteta na nivou procesa u neizvesnom okruženju, The evaluation of quality goals at the process level in a uncertain environment",
pages = "38-31",
number = "1",
volume = "11",
doi = "10.5937/jaes11-3271"
}

Puškarić, H., Tadić, D., Misita, M., Stefanović, M.,& Milanović, D.. (2013). Ocena performansi ciljeva kvaliteta na nivou procesa u neizvesnom okruženju. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 11(1), 31-38.
https://doi.org/10.5937/jaes11-3271

Puškarić H, Tadić D, Misita M, Stefanović M, Milanović D. Ocena performansi ciljeva kvaliteta na nivou procesa u neizvesnom okruženju. in Journal of Applied Engineering Science. 2013;11(1):31-38.
doi:10.5937/jaes11-3271 .

Puškarić, Hrvoje, Tadić, Danijela, Misita, Mirjana, Stefanović, Miladin, Milanović, Dragan, "Ocena performansi ciljeva kvaliteta na nivou procesa u neizvesnom okruženju" in Journal of Applied Engineering Science, 11, no. 1 (2013):31-38,
https://doi.org/10.5937/jaes11-3271 . .

TY  - JOUR
AU  - Ilić, Miroslav
AU  - Kefer, Petar
AU  - Milanović, Dragan
AU  - Misita, Mirjana
AU  - Milanović, Dragan
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1740
AB  - Contemporary conditions of conducting business based on IT and the Internet have essentially changed the philosophy of business in all agents involved in passenger transport. Rail companies have placed the passenger and his wishes in the focus of their business operations, while supply of majority of passenger services, except for transport itself: those companies are grounding on e-commerce and information systems based on the Internet technologies. The existence and strategic positioning of Serbian Railways (SR) on the transport services market and the integration of SR into the system of Europe's railways is possible only if SR becomes oriented to contemporary IT and e-commerce in the domain of passenger rail services. The paper demonstrates how to design Web-oriented information system in domestic passenger traffic, which is based on the latest software solutions and which supports the concept of e-ticketing. The developed system can become a constituent part of the future integrated business information system that will contribute significantly to the accomplishment of SR strategic goals and objectives.
T2  - Metalurgia International
T1  - Web-oriented information systems in domestic passenger traffic on Serbian railways
EP  - 181
IS  - SPEC.4
SP  - 177
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1740
ER  - 

@article{
author = "Ilić, Miroslav and Kefer, Petar and Milanović, Dragan and Misita, Mirjana and Milanović, Dragan",
year = "2013",
abstract = "Contemporary conditions of conducting business based on IT and the Internet have essentially changed the philosophy of business in all agents involved in passenger transport. Rail companies have placed the passenger and his wishes in the focus of their business operations, while supply of majority of passenger services, except for transport itself: those companies are grounding on e-commerce and information systems based on the Internet technologies. The existence and strategic positioning of Serbian Railways (SR) on the transport services market and the integration of SR into the system of Europe's railways is possible only if SR becomes oriented to contemporary IT and e-commerce in the domain of passenger rail services. The paper demonstrates how to design Web-oriented information system in domestic passenger traffic, which is based on the latest software solutions and which supports the concept of e-ticketing. The developed system can become a constituent part of the future integrated business information system that will contribute significantly to the accomplishment of SR strategic goals and objectives.",
journal = "Metalurgia International",
title = "Web-oriented information systems in domestic passenger traffic on Serbian railways",
pages = "181-177",
number = "SPEC.4",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1740"
}

Ilić, M., Kefer, P., Milanović, D., Misita, M.,& Milanović, D.. (2013). Web-oriented information systems in domestic passenger traffic on Serbian railways. in Metalurgia International, 18(SPEC.4), 177-181.
https://hdl.handle.net/21.15107/rcub_machinery_1740

Ilić M, Kefer P, Milanović D, Misita M, Milanović D. Web-oriented information systems in domestic passenger traffic on Serbian railways. in Metalurgia International. 2013;18(SPEC.4):177-181.
https://hdl.handle.net/21.15107/rcub_machinery_1740 .

Ilić, Miroslav, Kefer, Petar, Milanović, Dragan, Misita, Mirjana, Milanović, Dragan, "Web-oriented information systems in domestic passenger traffic on Serbian railways" in Metalurgia International, 18, no. SPEC.4 (2013):177-181,
https://hdl.handle.net/21.15107/rcub_machinery_1740 .

TY  - JOUR
AU  - Bobor, Vojislav
AU  - Milanović, Dragan
AU  - Kefer, Petar
PY  - 2013
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1777
AB  - Poslovne aplikacije i softverske platforme prelaze u cloud okruženje. Ovaj rad ima za cilj analizu nove generacije alata koji se koriste u industrijskoj proizvodnji zajedno sa cloud tehnologijama. Decenije pred nama će obeležiti nov način komunikacije u poslovnim okruženjima telekomunikacija i medicine kao i industrijske proizvodnje i energetske efikasnosti. Standarde poslovne aplikacije i instalacije softvera zahtevaju značajna finansijska sredstva i troškove za hardver. Sa tim u vezi postoji potreba za timovima stručnjaka za instalaciju, testiranje i održavanje sistema. Novi pristup aplikacijama ovoj oblasti donosi nove načine ažuriranja softvera koje je automatsko, sa lakim pristupom aplikacijama bez obzira gde se prostorno nalazite.
AB  - Content - Business applications and software platforms crossing in the cloud environment. This paper analyses new generation of management tools in industrial production with cloud technologies. The decades ahead will be marked by a new way of communication in business environments from telecommunication field to medicine as well as industrial production and energy efficiency. Standard business applications and software with its installation and maintenance require considerable financial resources and significant spending on hardware. To address that requirement there is the need for special teams of experts to install, test and maintain the system. The new approach to cloud applications brings to this field that what is needed, a software update is automatic with an easy access to applications efficiently from anywhere on the planet and spatially are independent where you are located.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Prostorno lokalizovano upravljanje kompanijama upotrebom 'cloud' tehnologija
T1  - Spatially localized management companies using cloud technology
EP  - 80
IS  - 2
SP  - 75
VL  - 11
DO  - 10.5937/jaes11-3344
ER  - 

@article{
author = "Bobor, Vojislav and Milanović, Dragan and Kefer, Petar",
year = "2013",
abstract = "Poslovne aplikacije i softverske platforme prelaze u cloud okruženje. Ovaj rad ima za cilj analizu nove generacije alata koji se koriste u industrijskoj proizvodnji zajedno sa cloud tehnologijama. Decenije pred nama će obeležiti nov način komunikacije u poslovnim okruženjima telekomunikacija i medicine kao i industrijske proizvodnje i energetske efikasnosti. Standarde poslovne aplikacije i instalacije softvera zahtevaju značajna finansijska sredstva i troškove za hardver. Sa tim u vezi postoji potreba za timovima stručnjaka za instalaciju, testiranje i održavanje sistema. Novi pristup aplikacijama ovoj oblasti donosi nove načine ažuriranja softvera koje je automatsko, sa lakim pristupom aplikacijama bez obzira gde se prostorno nalazite., Content - Business applications and software platforms crossing in the cloud environment. This paper analyses new generation of management tools in industrial production with cloud technologies. The decades ahead will be marked by a new way of communication in business environments from telecommunication field to medicine as well as industrial production and energy efficiency. Standard business applications and software with its installation and maintenance require considerable financial resources and significant spending on hardware. To address that requirement there is the need for special teams of experts to install, test and maintain the system. The new approach to cloud applications brings to this field that what is needed, a software update is automatic with an easy access to applications efficiently from anywhere on the planet and spatially are independent where you are located.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Prostorno lokalizovano upravljanje kompanijama upotrebom 'cloud' tehnologija, Spatially localized management companies using cloud technology",
pages = "80-75",
number = "2",
volume = "11",
doi = "10.5937/jaes11-3344"
}

Bobor, V., Milanović, D.,& Kefer, P.. (2013). Prostorno lokalizovano upravljanje kompanijama upotrebom 'cloud' tehnologija. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 11(2), 75-80.
https://doi.org/10.5937/jaes11-3344

Bobor V, Milanović D, Kefer P. Prostorno lokalizovano upravljanje kompanijama upotrebom 'cloud' tehnologija. in Journal of Applied Engineering Science. 2013;11(2):75-80.
doi:10.5937/jaes11-3344 .

Bobor, Vojislav, Milanović, Dragan, Kefer, Petar, "Prostorno lokalizovano upravljanje kompanijama upotrebom 'cloud' tehnologija" in Journal of Applied Engineering Science, 11, no. 2 (2013):75-80,
https://doi.org/10.5937/jaes11-3344 . .

TY  - JOUR
AU  - Dragojlović, Predrag
AU  - Misita, Mirjana
AU  - Milanović, Dragan
AU  - Tadić, Danijela
AU  - Kirin, Snežana
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1608
AB  - The paper presents the integration of risk mamagement methodology and multicriterial optimization of production program. The aim of the research is development an integrated risk management model and multicriterial optimization of production program that will enable reduction of risk of operating losses and increase efficiency of enerprise management in the production program selection Research results indicate that the decision makers in using an integrated model for an optimal production program, rated the model as a significant support in decision making process, shortening decision making time and increase the quality of decisions as it is based on quantitive indicators and and not on subjective evaluation.
T2  - Metalurgia International
T1  - Risk management and multicriteria optimization of production program
EP  - 39
IS  - 6
SP  - 35
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1608
ER  - 

@article{
author = "Dragojlović, Predrag and Misita, Mirjana and Milanović, Dragan and Tadić, Danijela and Kirin, Snežana",
year = "2012",
abstract = "The paper presents the integration of risk mamagement methodology and multicriterial optimization of production program. The aim of the research is development an integrated risk management model and multicriterial optimization of production program that will enable reduction of risk of operating losses and increase efficiency of enerprise management in the production program selection Research results indicate that the decision makers in using an integrated model for an optimal production program, rated the model as a significant support in decision making process, shortening decision making time and increase the quality of decisions as it is based on quantitive indicators and and not on subjective evaluation.",
journal = "Metalurgia International",
title = "Risk management and multicriteria optimization of production program",
pages = "39-35",
number = "6",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1608"
}

Dragojlović, P., Misita, M., Milanović, D., Tadić, D.,& Kirin, S.. (2012). Risk management and multicriteria optimization of production program. in Metalurgia International, 17(6), 35-39.
https://hdl.handle.net/21.15107/rcub_machinery_1608

Dragojlović P, Misita M, Milanović D, Tadić D, Kirin S. Risk management and multicriteria optimization of production program. in Metalurgia International. 2012;17(6):35-39.
https://hdl.handle.net/21.15107/rcub_machinery_1608 .

Dragojlović, Predrag, Misita, Mirjana, Milanović, Dragan, Tadić, Danijela, Kirin, Snežana, "Risk management and multicriteria optimization of production program" in Metalurgia International, 17, no. 6 (2012):35-39,
https://hdl.handle.net/21.15107/rcub_machinery_1608 .

TY  - JOUR
AU  - Senussi, Galal H.
AU  - Misita, Mirjana
AU  - Kirin, Snežana
AU  - Milanović, Dragan
AU  - Tadić, Danijela
PY  - 2012
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/1605
AB  - This paper investigates the effects of the manner of calculating the product cost price on forming the impact criteria in production program optimization in metal working companies by means of genetic algorithms. An algorithm was defined for multi-objective production program optimization using genetic algorithms, with the application of nonlinear function of minimal costs and linear function for maximizing the machinery capacity level. The aim of the paper is to investigate the basic hypothesis that the manner of calculating the product cost price in metalworking companies within the framework of the goal to minimize the business operating costs has significant influence on the results obtained by applying genetic algorithms in production program optimization. The results of investigation indicate significant differences in an optimal production program gained by calculating the product cost price via traditional and activity-based costing approach to defining the nonlinear cost function, depending on the volume of production.
T2  - Metalurgia International
T1  - Analysis of optimal production program in metalworing industry
EP  - 20
IS  - 5
SP  - 14
VL  - 17
UR  - https://hdl.handle.net/21.15107/rcub_machinery_1605
ER  - 

@article{
author = "Senussi, Galal H. and Misita, Mirjana and Kirin, Snežana and Milanović, Dragan and Tadić, Danijela",
year = "2012",
abstract = "This paper investigates the effects of the manner of calculating the product cost price on forming the impact criteria in production program optimization in metal working companies by means of genetic algorithms. An algorithm was defined for multi-objective production program optimization using genetic algorithms, with the application of nonlinear function of minimal costs and linear function for maximizing the machinery capacity level. The aim of the paper is to investigate the basic hypothesis that the manner of calculating the product cost price in metalworking companies within the framework of the goal to minimize the business operating costs has significant influence on the results obtained by applying genetic algorithms in production program optimization. The results of investigation indicate significant differences in an optimal production program gained by calculating the product cost price via traditional and activity-based costing approach to defining the nonlinear cost function, depending on the volume of production.",
journal = "Metalurgia International",
title = "Analysis of optimal production program in metalworing industry",
pages = "20-14",
number = "5",
volume = "17",
url = "https://hdl.handle.net/21.15107/rcub_machinery_1605"
}

Senussi, G. H., Misita, M., Kirin, S., Milanović, D.,& Tadić, D.. (2012). Analysis of optimal production program in metalworing industry. in Metalurgia International, 17(5), 14-20.
https://hdl.handle.net/21.15107/rcub_machinery_1605

Senussi GH, Misita M, Kirin S, Milanović D, Tadić D. Analysis of optimal production program in metalworing industry. in Metalurgia International. 2012;17(5):14-20.
https://hdl.handle.net/21.15107/rcub_machinery_1605 .

Senussi, Galal H., Misita, Mirjana, Kirin, Snežana, Milanović, Dragan, Tadić, Danijela, "Analysis of optimal production program in metalworing industry" in Metalurgia International, 17, no. 5 (2012):14-20,
https://hdl.handle.net/21.15107/rcub_machinery_1605 .