Vidaković, Jelena

Link to this page

Authority KeyName Variants
2aeff880-51f3-47e6-8ad3-ebde961558ba
  • Vidaković, Jelena (10)

Author's Bibliography

Multifunkcionalna i rekonfigurabilna mašina alatka za brzu izradu prototipova glodanjem, laserskom obradom i dodavanjem materijala u polarno cilindričnim koordinatama

Živanović, Saša; Vorkapić, Nikola; Slavković, Nikola; Dimić, Zoran; Vidaković, Jelena

(Zavod za intelektualnu svojinu, Beograd, Knjeginje Ljubice 5, 2024-04-01)

TY  - PAT
AU  - Živanović, Saša
AU  - Vorkapić, Nikola
AU  - Slavković, Nikola
AU  - Dimić, Zoran
AU  - Vidaković, Jelena
PY  - 2024-04-01
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7790
AB  - Pronalazak se odnosi na multifunkcionalnu i rekonfigurabilnu mašinu alatku za brzu izradu prototipova koja predstavlja novi koncept 3-osne CNC mašine sa horizontalnom obrtnom osom, koja radi u polarno-cilindričnim koordinatama i omogućava jedinstvenu integraciju tri proizvodne tehnologije na jednoj mašini: glodanje, lasersku obradu i dodavanje materijala (3D štampanje). Mašina svoju rekonfigurabilnost ostvaruje zamenom završnih uređaja koji mogu biti glava za glodanje, laserska glava ili glava za 3D štampu, uz razvijeni rekonfigurabilni upravljački softver koji podržava sve tri tehnologije. Mašina se sastoji od nepokretne noseće strukture (1), na kojoj se nalaze horizontalne vođice (10) po kojima je klizno pomerljiv klizač (9) ose X na kome se nalaze vođice (12) po kojima je klizno pomerljiv klizač (11) ose Z, na koji se postavlja ili glavno vreteno (13A) ili laserska glava (13B) ili glava za 3D štampu (13C) kao završni uređaj. Noseća struktura (1) sadrži se i obrtnu osu A’ koju čine pogonski motor (3) koji pomoću kaišnog para (19) prenosi obrtni moment na obrtno vreteno (2), uležišteno nosačima (20) ležaja, sa steznom glavom (21) gde se postavlja obradak. Na nosećoj strukturi (1) se nalaze i vođice (15) po kojima je klizno pomerljiv nosač (14) zadnjeg šiljka koji se koristi kao dodatni oslonac pri stezanju dužih obradaka u cilju povećanja krutosti.
PB  - Zavod za intelektualnu svojinu, Beograd, Knjeginje Ljubice 5
T2  - Broj 1805 U1, Isprava o malom patentu od 01.4.2024.
T1  - Multifunkcionalna i rekonfigurabilna mašina alatka za brzu izradu prototipova glodanjem, laserskom obradom i dodavanjem materijala u polarno cilindričnim koordinatama
EP  - 9
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7790
ER  - 
@misc{
author = "Živanović, Saša and Vorkapić, Nikola and Slavković, Nikola and Dimić, Zoran and Vidaković, Jelena",
year = "2024-04-01",
abstract = "Pronalazak se odnosi na multifunkcionalnu i rekonfigurabilnu mašinu alatku za brzu izradu prototipova koja predstavlja novi koncept 3-osne CNC mašine sa horizontalnom obrtnom osom, koja radi u polarno-cilindričnim koordinatama i omogućava jedinstvenu integraciju tri proizvodne tehnologije na jednoj mašini: glodanje, lasersku obradu i dodavanje materijala (3D štampanje). Mašina svoju rekonfigurabilnost ostvaruje zamenom završnih uređaja koji mogu biti glava za glodanje, laserska glava ili glava za 3D štampu, uz razvijeni rekonfigurabilni upravljački softver koji podržava sve tri tehnologije. Mašina se sastoji od nepokretne noseće strukture (1), na kojoj se nalaze horizontalne vođice (10) po kojima je klizno pomerljiv klizač (9) ose X na kome se nalaze vođice (12) po kojima je klizno pomerljiv klizač (11) ose Z, na koji se postavlja ili glavno vreteno (13A) ili laserska glava (13B) ili glava za 3D štampu (13C) kao završni uređaj. Noseća struktura (1) sadrži se i obrtnu osu A’ koju čine pogonski motor (3) koji pomoću kaišnog para (19) prenosi obrtni moment na obrtno vreteno (2), uležišteno nosačima (20) ležaja, sa steznom glavom (21) gde se postavlja obradak. Na nosećoj strukturi (1) se nalaze i vođice (15) po kojima je klizno pomerljiv nosač (14) zadnjeg šiljka koji se koristi kao dodatni oslonac pri stezanju dužih obradaka u cilju povećanja krutosti.",
publisher = "Zavod za intelektualnu svojinu, Beograd, Knjeginje Ljubice 5",
journal = "Broj 1805 U1, Isprava o malom patentu od 01.4.2024.",
title = "Multifunkcionalna i rekonfigurabilna mašina alatka za brzu izradu prototipova glodanjem, laserskom obradom i dodavanjem materijala u polarno cilindričnim koordinatama",
pages = "9-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7790"
}
Živanović, S., Vorkapić, N., Slavković, N., Dimić, Z.,& Vidaković, J.. (2024-04-01). Multifunkcionalna i rekonfigurabilna mašina alatka za brzu izradu prototipova glodanjem, laserskom obradom i dodavanjem materijala u polarno cilindričnim koordinatama. in Broj 1805 U1, Isprava o malom patentu od 01.4.2024.
Zavod za intelektualnu svojinu, Beograd, Knjeginje Ljubice 5., 1-9.
https://hdl.handle.net/21.15107/rcub_machinery_7790
Živanović S, Vorkapić N, Slavković N, Dimić Z, Vidaković J. Multifunkcionalna i rekonfigurabilna mašina alatka za brzu izradu prototipova glodanjem, laserskom obradom i dodavanjem materijala u polarno cilindričnim koordinatama. in Broj 1805 U1, Isprava o malom patentu od 01.4.2024.. 2024;:1-9.
https://hdl.handle.net/21.15107/rcub_machinery_7790 .
Živanović, Saša, Vorkapić, Nikola, Slavković, Nikola, Dimić, Zoran, Vidaković, Jelena, "Multifunkcionalna i rekonfigurabilna mašina alatka za brzu izradu prototipova glodanjem, laserskom obradom i dodavanjem materijala u polarno cilindričnim koordinatama" in Broj 1805 U1, Isprava o malom patentu od 01.4.2024. (2024-04-01):1-9,
https://hdl.handle.net/21.15107/rcub_machinery_7790 .

Implementation of inverse kinematics algorithm for 6DoF robot arm in Unity

Vidaković, Jelena; Dević, Andrija; Zivković, Nikola; Kvrgić, Vladimir; Lazarević, Mihailo

(Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet, 2024)

TY  - CONF
AU  - Vidaković, Jelena
AU  - Dević, Andrija
AU  - Zivković, Nikola
AU  - Kvrgić, Vladimir
AU  - Lazarević, Mihailo
PY  - 2024
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7791
AB  - In this paper, the implementation of the solution of the
inverse kinematics problem for the 6DoF industrial robot arm in
the Unity game engine is presented. Unity, one of the most
popular game engines, is a very powerful tool and a leading
platform for creating XR applications. Two different methods for
the implementation of the solution of the inverse kinematics
problem have been proposed: 1) Development and
implementation of the inverse kinematics algorithm of a specific
robot, and 2) Using inverse kinematics solvers by integration of
Unity with dedicated robotics development frameworks. For
verification of the proposed procedures, a serial robot with
cylindrical joints RL15 is used.
PB  - Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet
C3  - Zbornik  radova  23rd International Symposium INFOTEH-JAHORINA, 20-22 March 2024
T1  - Implementation of inverse kinematics algorithm for 6DoF robot arm in Unity
EP  - 64
SP  - 60
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7791
ER  - 
@conference{
author = "Vidaković, Jelena and Dević, Andrija and Zivković, Nikola and Kvrgić, Vladimir and Lazarević, Mihailo",
year = "2024",
abstract = "In this paper, the implementation of the solution of the
inverse kinematics problem for the 6DoF industrial robot arm in
the Unity game engine is presented. Unity, one of the most
popular game engines, is a very powerful tool and a leading
platform for creating XR applications. Two different methods for
the implementation of the solution of the inverse kinematics
problem have been proposed: 1) Development and
implementation of the inverse kinematics algorithm of a specific
robot, and 2) Using inverse kinematics solvers by integration of
Unity with dedicated robotics development frameworks. For
verification of the proposed procedures, a serial robot with
cylindrical joints RL15 is used.",
publisher = "Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet",
journal = "Zbornik  radova  23rd International Symposium INFOTEH-JAHORINA, 20-22 March 2024",
title = "Implementation of inverse kinematics algorithm for 6DoF robot arm in Unity",
pages = "64-60",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7791"
}
Vidaković, J., Dević, A., Zivković, N., Kvrgić, V.,& Lazarević, M.. (2024). Implementation of inverse kinematics algorithm for 6DoF robot arm in Unity. in Zbornik  radova  23rd International Symposium INFOTEH-JAHORINA, 20-22 March 2024
Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet., 60-64.
https://hdl.handle.net/21.15107/rcub_machinery_7791
Vidaković J, Dević A, Zivković N, Kvrgić V, Lazarević M. Implementation of inverse kinematics algorithm for 6DoF robot arm in Unity. in Zbornik  radova  23rd International Symposium INFOTEH-JAHORINA, 20-22 March 2024. 2024;:60-64.
https://hdl.handle.net/21.15107/rcub_machinery_7791 .
Vidaković, Jelena, Dević, Andrija, Zivković, Nikola, Kvrgić, Vladimir, Lazarević, Mihailo, "Implementation of inverse kinematics algorithm for 6DoF robot arm in Unity" in Zbornik  radova  23rd International Symposium INFOTEH-JAHORINA, 20-22 March 2024 (2024):60-64,
https://hdl.handle.net/21.15107/rcub_machinery_7791 .

Synthesis of the control unit of the desktop robot arm actuated by stepper motors

Dević, Andrija; Vidaković, Jelena; Živković, Nikola; Lazarević, Mihailo

(Banja Luka: Faculty of Mechanical Engineering Banja Luka, Republic of Srpska, BiH, 2023)

TY  - CONF
AU  - Dević, Andrija
AU  - Vidaković, Jelena
AU  - Živković, Nikola
AU  - Lazarević, Mihailo
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6972
AB  - Small‐size (desktop) robot arms are being increasingly used in research and education, where low cost implementation prevails over the need for high dynamic performance. This paper presents a
design of a control unit for a 6DoF desktop robot arm with cylindrical joints actuated with stepper
motors. Feedforward control, often chosen as a control strategy for stepper motors due to the
simplicity of control algorithms, as well as the cost‐effectiveness of the solution, is selected as the
control method. The applicative software with GUI developed in Matlab is presented. A trajectory
planner based on the solution of the inverse kinematics problem and the user‐selected joint velocity profile is implemented. In order to avoid step skipping occurrence, the torque in joints necessary to  produce the programmed joints motion have to be achievable by the installed stepper motors. As a  part of applicative software, the check on the feasibility of the programmed robot trajectories by numerical simulation of solution of inverse dynamics problem in Simscape Multibody is performed. The microcontroller is used as an interface device that controls the stepper motor drivers. The applicative software communicates with the microcontroller using the TCP protocol.
PB  - Banja Luka: Faculty of Mechanical Engineering Banja Luka, Republic of Srpska, BiH
C3  - 16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING,DEMI 2023, Banja Luka 1-2. June
T1  - Synthesis of the control unit of the desktop robot arm actuated by stepper motors
EP  - 365
SP  - 361
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6972
ER  - 
@conference{
author = "Dević, Andrija and Vidaković, Jelena and Živković, Nikola and Lazarević, Mihailo",
year = "2023",
abstract = "Small‐size (desktop) robot arms are being increasingly used in research and education, where low cost implementation prevails over the need for high dynamic performance. This paper presents a
design of a control unit for a 6DoF desktop robot arm with cylindrical joints actuated with stepper
motors. Feedforward control, often chosen as a control strategy for stepper motors due to the
simplicity of control algorithms, as well as the cost‐effectiveness of the solution, is selected as the
control method. The applicative software with GUI developed in Matlab is presented. A trajectory
planner based on the solution of the inverse kinematics problem and the user‐selected joint velocity profile is implemented. In order to avoid step skipping occurrence, the torque in joints necessary to  produce the programmed joints motion have to be achievable by the installed stepper motors. As a  part of applicative software, the check on the feasibility of the programmed robot trajectories by numerical simulation of solution of inverse dynamics problem in Simscape Multibody is performed. The microcontroller is used as an interface device that controls the stepper motor drivers. The applicative software communicates with the microcontroller using the TCP protocol.",
publisher = "Banja Luka: Faculty of Mechanical Engineering Banja Luka, Republic of Srpska, BiH",
journal = "16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING,DEMI 2023, Banja Luka 1-2. June",
title = "Synthesis of the control unit of the desktop robot arm actuated by stepper motors",
pages = "365-361",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6972"
}
Dević, A., Vidaković, J., Živković, N.,& Lazarević, M.. (2023). Synthesis of the control unit of the desktop robot arm actuated by stepper motors. in 16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING,DEMI 2023, Banja Luka 1-2. June
Banja Luka: Faculty of Mechanical Engineering Banja Luka, Republic of Srpska, BiH., 361-365.
https://hdl.handle.net/21.15107/rcub_machinery_6972
Dević A, Vidaković J, Živković N, Lazarević M. Synthesis of the control unit of the desktop robot arm actuated by stepper motors. in 16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING,DEMI 2023, Banja Luka 1-2. June. 2023;:361-365.
https://hdl.handle.net/21.15107/rcub_machinery_6972 .
Dević, Andrija, Vidaković, Jelena, Živković, Nikola, Lazarević, Mihailo, "Synthesis of the control unit of the desktop robot arm actuated by stepper motors" in 16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING,DEMI 2023, Banja Luka 1-2. June (2023):361-365,
https://hdl.handle.net/21.15107/rcub_machinery_6972 .

SYSTEMATIC DESIGN OF A DESKTOP ROBOT ARM IN SOLIDWORKS AND MATLAB SIMULINK

Dević, Andrija; Vidaković, Jelena; Živković, Nikola; Lazarević, Mihailo

(Belgrade: Serbian Society of Mechanics, 2023)

TY  - CONF
AU  - Dević, Andrija
AU  - Vidaković, Jelena
AU  - Živković, Nikola
AU  - Lazarević, Mihailo
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7235
AB  - Robot arms are complex mechatronic systems whose design is a challenging and time-consuming task. Recently, low-cost small-size desktop robot arms have been increasingly used in education, research, households, etc. This paper presents the systematic design of a 6DoF desktop robot arm with cylindrical joints actuated with stepper motors. Within the design, the main goals were to achieve cost-effectiveness of the construction, to enable the simplicity of the control unit, and to achieve fast dynamics and good repeatability. The virtual simulation system of the manipulator, built using the integration of 3D design and modern multibody simulation environment, improves the robot design and the efficiency of the robot control system. 3D modeling of the robot arm is performed in SolidWorks. The location of each motor as well as the selection of the power transmission method achieve a reduction of the required moments in the joints during the robot movement. Verifying of motors’ dimensioning is performed using numerical simulation of robot inverse dynamics problem based on the SolidWorks 3D robot model for the desired robot operations within the Simulink environment by using Simscape Multibody.
PB  - Belgrade: Serbian Society of Mechanics
C3  - 9 th International Congress of Serbian Society of Mechanics Vrnjačka Banja, Serbia, July 5-7, 2023
T1  - SYSTEMATIC DESIGN OF A DESKTOP ROBOT ARM IN SOLIDWORKS AND MATLAB SIMULINK
EP  - 319
IS  - ID122
SP  - 326
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7235
ER  - 
@conference{
author = "Dević, Andrija and Vidaković, Jelena and Živković, Nikola and Lazarević, Mihailo",
year = "2023",
abstract = "Robot arms are complex mechatronic systems whose design is a challenging and time-consuming task. Recently, low-cost small-size desktop robot arms have been increasingly used in education, research, households, etc. This paper presents the systematic design of a 6DoF desktop robot arm with cylindrical joints actuated with stepper motors. Within the design, the main goals were to achieve cost-effectiveness of the construction, to enable the simplicity of the control unit, and to achieve fast dynamics and good repeatability. The virtual simulation system of the manipulator, built using the integration of 3D design and modern multibody simulation environment, improves the robot design and the efficiency of the robot control system. 3D modeling of the robot arm is performed in SolidWorks. The location of each motor as well as the selection of the power transmission method achieve a reduction of the required moments in the joints during the robot movement. Verifying of motors’ dimensioning is performed using numerical simulation of robot inverse dynamics problem based on the SolidWorks 3D robot model for the desired robot operations within the Simulink environment by using Simscape Multibody.",
publisher = "Belgrade: Serbian Society of Mechanics",
journal = "9 th International Congress of Serbian Society of Mechanics Vrnjačka Banja, Serbia, July 5-7, 2023",
title = "SYSTEMATIC DESIGN OF A DESKTOP ROBOT ARM IN SOLIDWORKS AND MATLAB SIMULINK",
pages = "319-326",
number = "ID122",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7235"
}
Dević, A., Vidaković, J., Živković, N.,& Lazarević, M.. (2023). SYSTEMATIC DESIGN OF A DESKTOP ROBOT ARM IN SOLIDWORKS AND MATLAB SIMULINK. in 9 th International Congress of Serbian Society of Mechanics Vrnjačka Banja, Serbia, July 5-7, 2023
Belgrade: Serbian Society of Mechanics.(ID122), 326-319.
https://hdl.handle.net/21.15107/rcub_machinery_7235
Dević A, Vidaković J, Živković N, Lazarević M. SYSTEMATIC DESIGN OF A DESKTOP ROBOT ARM IN SOLIDWORKS AND MATLAB SIMULINK. in 9 th International Congress of Serbian Society of Mechanics Vrnjačka Banja, Serbia, July 5-7, 2023. 2023;(ID122):326-319.
https://hdl.handle.net/21.15107/rcub_machinery_7235 .
Dević, Andrija, Vidaković, Jelena, Živković, Nikola, Lazarević, Mihailo, "SYSTEMATIC DESIGN OF A DESKTOP ROBOT ARM IN SOLIDWORKS AND MATLAB SIMULINK" in 9 th International Congress of Serbian Society of Mechanics Vrnjačka Banja, Serbia, July 5-7, 2023, no. ID122 (2023):326-319,
https://hdl.handle.net/21.15107/rcub_machinery_7235 .

FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION

Zivković, Nikola; Vidaković, Jelena; Lazarević, Mihailo

(Novi Sad : The Association of Intellectuals for the Development of Science in Serbia – “The Serbian Academic Center”, 2023)

TY  - JOUR
AU  - Zivković, Nikola
AU  - Vidaković, Jelena
AU  - Lazarević, Mihailo
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6978
AB  - Forward kinematics is fundamental to robot design, control, and simulation. Different forward kinematics algorithms have been developed to deal with the complex geometry of a robot. This paper presents a robot forward kinematics algorithm in dual quaternion space. The presented method uses Denavit-Hartenberg (DH) convention for uniform definition of successive rotational and translational transformations in joints along the robot’s kinematic chain. This research aims to utilize the advantages of dual quaternions and DH convection for forward kinematics computation and make the algorithm, which is compact, intuitive, numerically robust, and computationally efficient as it uses the minimal number of parameters required for the computation, suitable for implementation in ROS and similar software. The algorithm is verified on the 6DoF industrial robot RL15, with the symbolic equations and numerical simulation presented.
PB  - Novi Sad : The Association of Intellectuals for the Development of Science in Serbia – “The Serbian Academic Center”
T2  - Applied Engineering Letters
T1  - FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION
EP  - 59
IS  - 2
SP  - 52
VL  - 8
DO  - 10.18485/aeletters.2023.8.2.2
ER  - 
@article{
author = "Zivković, Nikola and Vidaković, Jelena and Lazarević, Mihailo",
year = "2023",
abstract = "Forward kinematics is fundamental to robot design, control, and simulation. Different forward kinematics algorithms have been developed to deal with the complex geometry of a robot. This paper presents a robot forward kinematics algorithm in dual quaternion space. The presented method uses Denavit-Hartenberg (DH) convention for uniform definition of successive rotational and translational transformations in joints along the robot’s kinematic chain. This research aims to utilize the advantages of dual quaternions and DH convection for forward kinematics computation and make the algorithm, which is compact, intuitive, numerically robust, and computationally efficient as it uses the minimal number of parameters required for the computation, suitable for implementation in ROS and similar software. The algorithm is verified on the 6DoF industrial robot RL15, with the symbolic equations and numerical simulation presented.",
publisher = "Novi Sad : The Association of Intellectuals for the Development of Science in Serbia – “The Serbian Academic Center”",
journal = "Applied Engineering Letters",
title = "FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION",
pages = "59-52",
number = "2",
volume = "8",
doi = "10.18485/aeletters.2023.8.2.2"
}
Zivković, N., Vidaković, J.,& Lazarević, M.. (2023). FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION. in Applied Engineering Letters
Novi Sad : The Association of Intellectuals for the Development of Science in Serbia – “The Serbian Academic Center”., 8(2), 52-59.
https://doi.org/10.18485/aeletters.2023.8.2.2
Zivković N, Vidaković J, Lazarević M. FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION. in Applied Engineering Letters. 2023;8(2):52-59.
doi:10.18485/aeletters.2023.8.2.2 .
Zivković, Nikola, Vidaković, Jelena, Lazarević, Mihailo, "FORWARD KINEMATICS ALGORITHM IN DUAL QUATERNION SPACE BASED ON DENAVIT-HARTENBERG CONVENTION" in Applied Engineering Letters, 8, no. 2 (2023):52-59,
https://doi.org/10.18485/aeletters.2023.8.2.2 . .

Design of MULTIPRODESK: Multifunctional rapid prototyping desktop machine

Živanović, Saša; Vorkapić, Nikola; Slavković, Nikola; Dimić, Zoran; Vidaković, Jelena

(University of Belgrade - Faculty of Mechanical Engineering, 2023)

TY  - CONF
AU  - Živanović, Saša
AU  - Vorkapić, Nikola
AU  - Slavković, Nikola
AU  - Dimić, Zoran
AU  - Vidaković, Jelena
PY  - 2023
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7135
AB  - Rapid prototyping technology has emerged as one of the most significant technologies that enable the reduction of the product development and production times. The novel low-cost desktop multifunctional machine tool, able to support additive and subtractive manufacturing of symmetrical and asymmetrical cylindrical parts, is presented. The core of the invention is the new concept of the machine tool with a horizontal rotating device chuck (3-axis rotary CNC) as a multifunctional rapid prototyping machine. The specific concept of the machine’s geometry enabled reconfigurability, i.e., the simple change of tools for the unique combination of three production technologies on one desktop machine: milling, laser engraving, and rotary 3D printing. Open-source control infrastructure enables end-user customization and machine upgradeability and achieves cost-effectiveness. Innovative design enables additional technological advantages in the desktop rapid prototyping machine tools domain, such as: 1) the possibility of the production of a single cylindrical part completely in one clamping by using a combination of additive and subtractive manufacturing (which achieves effective use of material, energy, and reduced time consumption, increased productivity, increased accuracy); 2) modularity and the open architecture control structure which allows for upgradeability and further development of the machine according to end-user needs (possibility to add supplementary axes per users’ demands; 3) digital twin technology. MultiProDesk is a valuable production tool for SMEs in various production technologies where it allows users to adopt mass customization concepts and to reach mass personalization production (as a step to Industry 4.0).
PB  - University of Belgrade - Faculty of Mechanical Engineering
C3  - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2023 - The Book of Abstracts, Zlatibor, Serbia, 04-07 July.
T1  - Design of MULTIPRODESK: Multifunctional rapid prototyping desktop machine
SP  - 12
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7135
ER  - 
@conference{
author = "Živanović, Saša and Vorkapić, Nikola and Slavković, Nikola and Dimić, Zoran and Vidaković, Jelena",
year = "2023",
abstract = "Rapid prototyping technology has emerged as one of the most significant technologies that enable the reduction of the product development and production times. The novel low-cost desktop multifunctional machine tool, able to support additive and subtractive manufacturing of symmetrical and asymmetrical cylindrical parts, is presented. The core of the invention is the new concept of the machine tool with a horizontal rotating device chuck (3-axis rotary CNC) as a multifunctional rapid prototyping machine. The specific concept of the machine’s geometry enabled reconfigurability, i.e., the simple change of tools for the unique combination of three production technologies on one desktop machine: milling, laser engraving, and rotary 3D printing. Open-source control infrastructure enables end-user customization and machine upgradeability and achieves cost-effectiveness. Innovative design enables additional technological advantages in the desktop rapid prototyping machine tools domain, such as: 1) the possibility of the production of a single cylindrical part completely in one clamping by using a combination of additive and subtractive manufacturing (which achieves effective use of material, energy, and reduced time consumption, increased productivity, increased accuracy); 2) modularity and the open architecture control structure which allows for upgradeability and further development of the machine according to end-user needs (possibility to add supplementary axes per users’ demands; 3) digital twin technology. MultiProDesk is a valuable production tool for SMEs in various production technologies where it allows users to adopt mass customization concepts and to reach mass personalization production (as a step to Industry 4.0).",
publisher = "University of Belgrade - Faculty of Mechanical Engineering",
journal = "International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2023 - The Book of Abstracts, Zlatibor, Serbia, 04-07 July.",
title = "Design of MULTIPRODESK: Multifunctional rapid prototyping desktop machine",
pages = "12",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7135"
}
Živanović, S., Vorkapić, N., Slavković, N., Dimić, Z.,& Vidaković, J.. (2023). Design of MULTIPRODESK: Multifunctional rapid prototyping desktop machine. in International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2023 - The Book of Abstracts, Zlatibor, Serbia, 04-07 July.
University of Belgrade - Faculty of Mechanical Engineering., 12.
https://hdl.handle.net/21.15107/rcub_machinery_7135
Živanović S, Vorkapić N, Slavković N, Dimić Z, Vidaković J. Design of MULTIPRODESK: Multifunctional rapid prototyping desktop machine. in International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2023 - The Book of Abstracts, Zlatibor, Serbia, 04-07 July.. 2023;:12.
https://hdl.handle.net/21.15107/rcub_machinery_7135 .
Živanović, Saša, Vorkapić, Nikola, Slavković, Nikola, Dimić, Zoran, Vidaković, Jelena, "Design of MULTIPRODESK: Multifunctional rapid prototyping desktop machine" in International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2023 - The Book of Abstracts, Zlatibor, Serbia, 04-07 July. (2023):12,
https://hdl.handle.net/21.15107/rcub_machinery_7135 .

Flue Gas Heat Recovery in Wood Chip Boiler Used for Chip Drying

Manasijević, Srećko; Komatina, Mirko; Vidaković, Jelena; Stepanić, Pavle; Vasović, Ivana

(2022)

TY  - CONF
AU  - Manasijević, Srećko
AU  - Komatina, Mirko
AU  - Vidaković, Jelena
AU  - Stepanić, Pavle
AU  - Vasović, Ivana
PY  - 2022
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/7277
C3  - SimTerm2022, PROCEEDINGS, 20th International Conference on Thermal Science and Engineering of Serbia
T1  - Flue Gas Heat Recovery in Wood Chip Boiler Used for Chip Drying
UR  - https://hdl.handle.net/21.15107/rcub_machinery_7277
ER  - 
@conference{
author = "Manasijević, Srećko and Komatina, Mirko and Vidaković, Jelena and Stepanić, Pavle and Vasović, Ivana",
year = "2022",
journal = "SimTerm2022, PROCEEDINGS, 20th International Conference on Thermal Science and Engineering of Serbia",
title = "Flue Gas Heat Recovery in Wood Chip Boiler Used for Chip Drying",
url = "https://hdl.handle.net/21.15107/rcub_machinery_7277"
}
Manasijević, S., Komatina, M., Vidaković, J., Stepanić, P.,& Vasović, I.. (2022). Flue Gas Heat Recovery in Wood Chip Boiler Used for Chip Drying. in SimTerm2022, PROCEEDINGS, 20th International Conference on Thermal Science and Engineering of Serbia.
https://hdl.handle.net/21.15107/rcub_machinery_7277
Manasijević S, Komatina M, Vidaković J, Stepanić P, Vasović I. Flue Gas Heat Recovery in Wood Chip Boiler Used for Chip Drying. in SimTerm2022, PROCEEDINGS, 20th International Conference on Thermal Science and Engineering of Serbia. 2022;.
https://hdl.handle.net/21.15107/rcub_machinery_7277 .
Manasijević, Srećko, Komatina, Mirko, Vidaković, Jelena, Stepanić, Pavle, Vasović, Ivana, "Flue Gas Heat Recovery in Wood Chip Boiler Used for Chip Drying" in SimTerm2022, PROCEEDINGS, 20th International Conference on Thermal Science and Engineering of Serbia (2022),
https://hdl.handle.net/21.15107/rcub_machinery_7277 .

Моделовање и управљање манипулатора у системима за тренажу пилота савремених борбених авиона

Vidaković, Jelena; Lazarević, Mihailo; Kvrgić, Vladimir

(Истраживачко-развојни институт Лола д.о.о. Београд, 2020)

TY  - BOOK
AU  - Vidaković, Jelena
AU  - Lazarević, Mihailo
AU  - Kvrgić, Vladimir
PY  - 2020
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6573
AB  - Роботика и пратеће технологије су оствариле изузетан напредак и експанзију последњих неколико деценија. Једна од многобројних области технике у којој је роботика нашла примену је развој система за тренажу пилота. Борбени авиони новије генерације остварују нековенционалне летове при којима су пилоти изложени високим вредностима гравито-инерцијалних сила, брзим променама ових сила, као и брзим променама оријентације летелице. Описани неконвенционални услови лета неповољно утичу на физиологију пилота и смањују његову способност за обављање задатака управљања летелицом.  Обука пилота у тренажним уређајима за симулацију лета је дала велики допринос  безбедности лета, и постала је есенцијални аспект обуке на којем се заснива  економски просперитет многих цивилних и војних организација. Поред тога, употреба  тренажних уређаја за симулацију лета смањује време обуке пилота, омогућава  истраживања везана за развој самих летелица, истраживања људских фактора, и подразумева еколошку алтернативу обуци у авионима. Унапређење тренажних уређаја за симулацију лета борбених авиона је веома важно са аспекта безбедности лета, са  економског, и са еколошког становишта.
Монографија представља научни допринос аутора у области развоја напредних алгоритама моделовања и управљања роботских манипулатора у оквиру два система за тренажу пилота савремених борбених авиона: центрифуге за тренажу пилота (центрифуге), и уређаја за просторну дезоријентацију пилота (УПДП). Представљен рукопис је заокружена целина истраживања на тему развоја нових, као и унапређења постојећих метода и модела за центрифугу и УПДП у домену кинематике робота, динамике робота, развоја алгоритама планера трајекторије, адекватног избора
актуатора, развоја симулационих система, и одабира правилне стратегије управљања кретањем робота. Представљени модели, методе и алгоритми се могу применити и на серијске роботске манипулаторе у општем смислу, тако да је научни допринос представљених истраживања потребно сагледати и из општег контекста индустријске роботике.
         Изложена материја подржава актуелне трендове у роботици, и представља селективан текст који садржи и савремена теоретска знања из области, а све са циљем да се заинтересованом читаоцу омогући лакши и непосреднији приступ овој сложеној проблематици.
PB  - Истраживачко-развојни институт Лола д.о.о.  Београд
T1  - Моделовање и управљање манипулатора у системима за тренажу пилота савремених борбених авиона
EP  - 280
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6573
ER  - 
@book{
author = "Vidaković, Jelena and Lazarević, Mihailo and Kvrgić, Vladimir",
year = "2020",
abstract = "Роботика и пратеће технологије су оствариле изузетан напредак и експанзију последњих неколико деценија. Једна од многобројних области технике у којој је роботика нашла примену је развој система за тренажу пилота. Борбени авиони новије генерације остварују нековенционалне летове при којима су пилоти изложени високим вредностима гравито-инерцијалних сила, брзим променама ових сила, као и брзим променама оријентације летелице. Описани неконвенционални услови лета неповољно утичу на физиологију пилота и смањују његову способност за обављање задатака управљања летелицом.  Обука пилота у тренажним уређајима за симулацију лета је дала велики допринос  безбедности лета, и постала је есенцијални аспект обуке на којем се заснива  економски просперитет многих цивилних и војних организација. Поред тога, употреба  тренажних уређаја за симулацију лета смањује време обуке пилота, омогућава  истраживања везана за развој самих летелица, истраживања људских фактора, и подразумева еколошку алтернативу обуци у авионима. Унапређење тренажних уређаја за симулацију лета борбених авиона је веома важно са аспекта безбедности лета, са  економског, и са еколошког становишта.
Монографија представља научни допринос аутора у области развоја напредних алгоритама моделовања и управљања роботских манипулатора у оквиру два система за тренажу пилота савремених борбених авиона: центрифуге за тренажу пилота (центрифуге), и уређаја за просторну дезоријентацију пилота (УПДП). Представљен рукопис је заокружена целина истраживања на тему развоја нових, као и унапређења постојећих метода и модела за центрифугу и УПДП у домену кинематике робота, динамике робота, развоја алгоритама планера трајекторије, адекватног избора
актуатора, развоја симулационих система, и одабира правилне стратегије управљања кретањем робота. Представљени модели, методе и алгоритми се могу применити и на серијске роботске манипулаторе у општем смислу, тако да је научни допринос представљених истраживања потребно сагледати и из општег контекста индустријске роботике.
         Изложена материја подржава актуелне трендове у роботици, и представља селективан текст који садржи и савремена теоретска знања из области, а све са циљем да се заинтересованом читаоцу омогући лакши и непосреднији приступ овој сложеној проблематици.",
publisher = "Истраживачко-развојни институт Лола д.о.о.  Београд",
title = "Моделовање и управљање манипулатора у системима за тренажу пилота савремених борбених авиона",
pages = "280-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6573"
}
Vidaković, J., Lazarević, M.,& Kvrgić, V.. (2020). Моделовање и управљање манипулатора у системима за тренажу пилота савремених борбених авиона. 
Истраживачко-развојни институт Лола д.о.о.  Београд., 1-280.
https://hdl.handle.net/21.15107/rcub_machinery_6573
Vidaković J, Lazarević M, Kvrgić V. Моделовање и управљање манипулатора у системима за тренажу пилота савремених борбених авиона. 2020;:1-280.
https://hdl.handle.net/21.15107/rcub_machinery_6573 .
Vidaković, Jelena, Lazarević, Mihailo, Kvrgić, Vladimir, "Моделовање и управљање манипулатора у системима за тренажу пилота савремених борбених авиона" (2020):1-280,
https://hdl.handle.net/21.15107/rcub_machinery_6573 .

Прилог моделирању и управљању роботских и адаптронских система

Lazarević, Mihailo; Vidaković, Jelena; Cajić, Milan; Mandić, Petar

(Машински факултет Универзитет у Београду, 2014)

TY  - BOOK
AU  - Lazarević, Mihailo
AU  - Vidaković, Jelena
AU  - Cajić, Milan
AU  - Mandić, Petar
PY  - 2014
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/6755
AB  - Са становишта механике роботски системи/адаптронски системи представљају системе крутих (еластичних) тела и као такви се даље могу егзактно проучавати. При томе, тополошка структура на пример једног уоченог роботског/адаптронског система, може бити представљена у виду отвореног кинематичког ланца без или са гранањем или у облику затвореног кинематичког ланца. У математичком смислу динамички модели таквих система описани су обичним нелинеарним диференцијалним једначинама. У овој монографији представљени су нови научни резултати аутора и она је настала из интезивног бављења првопотписаног аутора овом проблематиком који је успео да тематски заокружи и уобличи пажљиво одабране досадашње резултате из ове области као и његовом евидентном сарадњом са његовим колегама, докторантима који се баве овом проблематиком.
Посебан квалитет у првом делу ове монографије представљају добијени резултати који се односе на проблематику моделирања динамике роботског система (хумане центрифуге) применом теорије кватерниона односно одређивању реакција веза и кинетичких притисака у зглобовима датих
система који се могу одредити и у симболичком облику. Такође, не мањи значај даје чињеница да је по први пут у оквиру динамике адаптронских система за случај где су за два различита тела у систему везан дати пиезо-модификовани вискоеластични/МР (магнетореолошки) добијени изрази у аналитичком облику за генералисане  силе пиезо-вискоеластичног/ МР елемента, где је илустрован утицај промене
параметара датих вискоеластичних елемената на динамику датог адаптронског система.  У другом делу монографије,остварена је примена класичне теорије управљања као и савремене теорије рачуна нецелобројног реда (fractional calculus-a) у задацима управљања кретањем роботског система (ротационим инверзним клатном), као и итеративног управљања путем учења.Такође, приказан је и нови алгоритам управљања у циљу одређивања угаоне брзине крака хумане центрифуге при режиму рада у отвореној петљи.
PB  - Машински факултет Универзитет у Београду
T2  - Машински факултет  Универзитет у Београду   2014
T1  - Прилог моделирању и управљању роботских и адаптронских система
EP  - 211
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_machinery_6755
ER  - 
@book{
author = "Lazarević, Mihailo and Vidaković, Jelena and Cajić, Milan and Mandić, Petar",
year = "2014",
abstract = "Са становишта механике роботски системи/адаптронски системи представљају системе крутих (еластичних) тела и као такви се даље могу егзактно проучавати. При томе, тополошка структура на пример једног уоченог роботског/адаптронског система, може бити представљена у виду отвореног кинематичког ланца без или са гранањем или у облику затвореног кинематичког ланца. У математичком смислу динамички модели таквих система описани су обичним нелинеарним диференцијалним једначинама. У овој монографији представљени су нови научни резултати аутора и она је настала из интезивног бављења првопотписаног аутора овом проблематиком који је успео да тематски заокружи и уобличи пажљиво одабране досадашње резултате из ове области као и његовом евидентном сарадњом са његовим колегама, докторантима који се баве овом проблематиком.
Посебан квалитет у првом делу ове монографије представљају добијени резултати који се односе на проблематику моделирања динамике роботског система (хумане центрифуге) применом теорије кватерниона односно одређивању реакција веза и кинетичких притисака у зглобовима датих
система који се могу одредити и у симболичком облику. Такође, не мањи значај даје чињеница да је по први пут у оквиру динамике адаптронских система за случај где су за два различита тела у систему везан дати пиезо-модификовани вискоеластични/МР (магнетореолошки) добијени изрази у аналитичком облику за генералисане  силе пиезо-вискоеластичног/ МР елемента, где је илустрован утицај промене
параметара датих вискоеластичних елемената на динамику датог адаптронског система.  У другом делу монографије,остварена је примена класичне теорије управљања као и савремене теорије рачуна нецелобројног реда (fractional calculus-a) у задацима управљања кретањем роботског система (ротационим инверзним клатном), као и итеративног управљања путем учења.Такође, приказан је и нови алгоритам управљања у циљу одређивања угаоне брзине крака хумане центрифуге при режиму рада у отвореној петљи.",
publisher = "Машински факултет Универзитет у Београду",
journal = "Машински факултет  Универзитет у Београду   2014",
title = "Прилог моделирању и управљању роботских и адаптронских система",
pages = "211-1",
url = "https://hdl.handle.net/21.15107/rcub_machinery_6755"
}
Lazarević, M., Vidaković, J., Cajić, M.,& Mandić, P.. (2014). Прилог моделирању и управљању роботских и адаптронских система. in Машински факултет  Универзитет у Београду   2014
Машински факултет Универзитет у Београду., 1-211.
https://hdl.handle.net/21.15107/rcub_machinery_6755
Lazarević M, Vidaković J, Cajić M, Mandić P. Прилог моделирању и управљању роботских и адаптронских система. in Машински факултет  Универзитет у Београду   2014. 2014;:1-211.
https://hdl.handle.net/21.15107/rcub_machinery_6755 .
Lazarević, Mihailo, Vidaković, Jelena, Cajić, Milan, Mandić, Petar, "Прилог моделирању и управљању роботских и адаптронских система" in Машински факултет  Универзитет у Београду   2014 (2014):1-211,
https://hdl.handle.net/21.15107/rcub_machinery_6755 .

Forward and inverse kinematics for vertical 5-axis turning center with angular head of non-intersectional axes, with compensation for table moving caused by base thermal dilatation

Kvrgić, Vladimir; Vidaković, Jelena; Kaplarević, Vladimir; Lazarević, Mihailo

(Belgrade: Serbian Society of Mechanics, 2011)

TY  - CONF
AU  - Kvrgić, Vladimir
AU  - Vidaković, Jelena
AU  - Kaplarević, Vladimir
AU  - Lazarević, Mihailo
PY  - 2011
UR  - https://machinery.mas.bg.ac.rs/handle/123456789/4764
AB  - The paper presents the solution for forward and inverse kinematics of the vertical
5-axis turning centers with 2 linear and 3 rotational axes (Cy, X, Z, Bt and Ct) which for the
5-axis milling achieves the motion accomplished by 3 linear and 2 rotational axes (X, Y, Z,
Bt and Cy). It has been done in such a way to provide for machine motion programming as if
machining were performed on a 5-axis gantry milling machine. This has essentially
facilitated machine programming, because tool positions and orientations required for
programming are determined disregarding the workpiece swiveling during machining and
current positions and orientations taken by the tool during machining relative to the
workpiece. Turning center has a 2-rotary-axis head with axes Ct and Bt which do not
intersect. This type of angular head has increased the possibilities of machining and allowed
for performing certain types of machining without machine’s taking the singular positions,
but it has made the machine control algorithm more complex. A high number of rotating of
the table, required for turning, causes heating of the table bearing support and base thermal
dilatation. If milling or drilling is done immediately after turning, the table and X axis
motion control should be corrected to eliminate the error in machining appeared due to
dilatation, as has been done in this paper.
PB  - Belgrade: Serbian Society of Mechanics
C3  - Proceedings of the 3rd International Congress of Serbian Society of Mechanics (IConSSM 2011),Vlasina lake (Serbia), 5-8 July 2011
T1  - Forward and inverse kinematics for vertical 5-axis turning center with angular head of non-intersectional axes, with compensation for table moving caused by base thermal dilatation
EP  - 589
SP  - 574
UR  - https://hdl.handle.net/21.15107/rcub_machinery_4764
ER  - 
@conference{
author = "Kvrgić, Vladimir and Vidaković, Jelena and Kaplarević, Vladimir and Lazarević, Mihailo",
year = "2011",
abstract = "The paper presents the solution for forward and inverse kinematics of the vertical
5-axis turning centers with 2 linear and 3 rotational axes (Cy, X, Z, Bt and Ct) which for the
5-axis milling achieves the motion accomplished by 3 linear and 2 rotational axes (X, Y, Z,
Bt and Cy). It has been done in such a way to provide for machine motion programming as if
machining were performed on a 5-axis gantry milling machine. This has essentially
facilitated machine programming, because tool positions and orientations required for
programming are determined disregarding the workpiece swiveling during machining and
current positions and orientations taken by the tool during machining relative to the
workpiece. Turning center has a 2-rotary-axis head with axes Ct and Bt which do not
intersect. This type of angular head has increased the possibilities of machining and allowed
for performing certain types of machining without machine’s taking the singular positions,
but it has made the machine control algorithm more complex. A high number of rotating of
the table, required for turning, causes heating of the table bearing support and base thermal
dilatation. If milling or drilling is done immediately after turning, the table and X axis
motion control should be corrected to eliminate the error in machining appeared due to
dilatation, as has been done in this paper.",
publisher = "Belgrade: Serbian Society of Mechanics",
journal = "Proceedings of the 3rd International Congress of Serbian Society of Mechanics (IConSSM 2011),Vlasina lake (Serbia), 5-8 July 2011",
title = "Forward and inverse kinematics for vertical 5-axis turning center with angular head of non-intersectional axes, with compensation for table moving caused by base thermal dilatation",
pages = "589-574",
url = "https://hdl.handle.net/21.15107/rcub_machinery_4764"
}
Kvrgić, V., Vidaković, J., Kaplarević, V.,& Lazarević, M.. (2011). Forward and inverse kinematics for vertical 5-axis turning center with angular head of non-intersectional axes, with compensation for table moving caused by base thermal dilatation. in Proceedings of the 3rd International Congress of Serbian Society of Mechanics (IConSSM 2011),Vlasina lake (Serbia), 5-8 July 2011
Belgrade: Serbian Society of Mechanics., 574-589.
https://hdl.handle.net/21.15107/rcub_machinery_4764
Kvrgić V, Vidaković J, Kaplarević V, Lazarević M. Forward and inverse kinematics for vertical 5-axis turning center with angular head of non-intersectional axes, with compensation for table moving caused by base thermal dilatation. in Proceedings of the 3rd International Congress of Serbian Society of Mechanics (IConSSM 2011),Vlasina lake (Serbia), 5-8 July 2011. 2011;:574-589.
https://hdl.handle.net/21.15107/rcub_machinery_4764 .
Kvrgić, Vladimir, Vidaković, Jelena, Kaplarević, Vladimir, Lazarević, Mihailo, "Forward and inverse kinematics for vertical 5-axis turning center with angular head of non-intersectional axes, with compensation for table moving caused by base thermal dilatation" in Proceedings of the 3rd International Congress of Serbian Society of Mechanics (IConSSM 2011),Vlasina lake (Serbia), 5-8 July 2011 (2011):574-589,
https://hdl.handle.net/21.15107/rcub_machinery_4764 .