Претраживање
Приказ резултата 1-10 од 32
Mock-up testing facilities and qualification strategy for EU ITER TBMs
(Elsevier Science Sa, Lausanne, 2010)
European test blanket modules (TBM) for both European blanket concepts, namely the Helium Cooled Lithium Lead (HCLL) and the Helium Cooled Pebble Bed (HCPB), and their auxiliary systems have been designed in the last years. ...
Fem model for calculation of hydro turbine shaft
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2010)
This paper describes the real problem calculation of stress state of hydro turbine shaft with crack appearance on shaft-flange radii. Finite element method (FEM) is used for calculation of shaft stress state and shaft ...
Quantification of stress raiser influence on decrease of machine parts fatigue life
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
This paper displays the usage of Theory of Critical Distances (TCD) in the prediction of high-cycle fatigue behaviour in machine parts and systems. It is possible to gain real overview of stresses of machine parts by Finite ...
Prediction of crack initiation in spur gear contact zone
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
The objective of this paper is to give a new viewpoint in contact fatigue prediction in the case of high-cycle fatigue. The presented research is based on up-to-date methods and multidisciplinary approach, and enables ...
HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
(Elsevier Science Sa, Lausanne, 2011)
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first ...
Failure investigation of the bucket wheel excavator crawler chain link
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The high mobility of open pit machines in heavy duty conditions provides fertile ground for the occurrence of various failures of the traveling mechanisms' vital parts such as chain links. The goal of the study presented ...
The fundamental role of fluid dynamic analyses in the design of the solid EU Test Blanket Module
(Elsevier Science Sa, Lausanne, 2012)
In the frame of the activities of the European Test Blanket Module Consortium of Associates, the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM), the so-called solid TBM, is developed in Karlsruhe Institute of ...
Explicit parametric method for optimal spur gear tooth profile definition
(Trans Tech Publications Ltd, 2013)
The gear tooth profile has an immense effect on the main operating parameters of gear pairs (load capacity, working life, efficiency, vibrations, etc). In current engineering research and practice, there is a strong need ...
The influence of corrosion on stress concentration factor at shaft to flange radius
(Springer Netherlands, 2013)
This paper describes the influence of corrosion on stress concentration factor and crack initiation at shaft-flange transition section. The real turbine shaft failure case study is used for research. This case study and ...
Assessment of the effect of pitting corrosion on fatigue crack initiation in hydro turbine shaft
(Trans Tech Publications Ltd, 2013)
Energy efficiency is a key issue worldwide, and not confined solely to the realm of engineers. Past failures of mechanical power system components must be examined carefully in order to minimise future occurrences and ...