The influence of corrosion on stress concentration factor at shaft to flange radius
Само за регистроване кориснике
2013
Конференцијски прилог (Објављена верзија)
![](/themes/Miragemashinery//images/creativecommons/arr.png)
Метаподаци
Приказ свих података о документуАпстракт
This paper describes the influence of corrosion on stress concentration factor and crack initiation at shaft-flange transition section. The real turbine shaft failure case study is used for research. This case study and numerical calculations show that the seal box solution led to constant leakage of river water in the zone of critical radius and resulted in corrosion fatigue cracks and turbine shaft failure. Thus, the Finite Element Analysis is performed to calculate the stress concentration factor increase as a result of corrosion occurrence. The corrosion at shaft-flange transition section is modelled in the zone with maximum stresses with a corrosion pit dimensioned to comply with real in situ dimension of pits. The presented research points new trends in stress concentration factor calculation. The obtained numerical results for maximum stress and stress concentration factor in critical zone confirmed failure analysis study outcome.
Кључне речи:
Stress concentration / Shafts / FEA / CorrosionИзвор:
Mechanisms and Machine Science, 2013, 13, 657-666Издавач:
- Springer Netherlands
Финансирање / пројекти:
- Развој методологија за повећање радне способности, поузданости и енергетске ефикасности машинских система у енергетици (RS-MESTD-Technological Development (TD or TR)-35029)
Институција/група
Mašinski fakultetTY - CONF AU - Atanasovska, Ivana AU - Jelić, M. AU - Mitrović, Radivoje AU - Momčilović, Dejan B. PY - 2013 UR - https://machinery.mas.bg.ac.rs/handle/123456789/1734 AB - This paper describes the influence of corrosion on stress concentration factor and crack initiation at shaft-flange transition section. The real turbine shaft failure case study is used for research. This case study and numerical calculations show that the seal box solution led to constant leakage of river water in the zone of critical radius and resulted in corrosion fatigue cracks and turbine shaft failure. Thus, the Finite Element Analysis is performed to calculate the stress concentration factor increase as a result of corrosion occurrence. The corrosion at shaft-flange transition section is modelled in the zone with maximum stresses with a corrosion pit dimensioned to comply with real in situ dimension of pits. The presented research points new trends in stress concentration factor calculation. The obtained numerical results for maximum stress and stress concentration factor in critical zone confirmed failure analysis study outcome. PB - Springer Netherlands C3 - Mechanisms and Machine Science T1 - The influence of corrosion on stress concentration factor at shaft to flange radius EP - 666 SP - 657 VL - 13 DO - 10.1007/978-94-007-6558-0_53 ER -
@conference{ author = "Atanasovska, Ivana and Jelić, M. and Mitrović, Radivoje and Momčilović, Dejan B.", year = "2013", abstract = "This paper describes the influence of corrosion on stress concentration factor and crack initiation at shaft-flange transition section. The real turbine shaft failure case study is used for research. This case study and numerical calculations show that the seal box solution led to constant leakage of river water in the zone of critical radius and resulted in corrosion fatigue cracks and turbine shaft failure. Thus, the Finite Element Analysis is performed to calculate the stress concentration factor increase as a result of corrosion occurrence. The corrosion at shaft-flange transition section is modelled in the zone with maximum stresses with a corrosion pit dimensioned to comply with real in situ dimension of pits. The presented research points new trends in stress concentration factor calculation. The obtained numerical results for maximum stress and stress concentration factor in critical zone confirmed failure analysis study outcome.", publisher = "Springer Netherlands", journal = "Mechanisms and Machine Science", title = "The influence of corrosion on stress concentration factor at shaft to flange radius", pages = "666-657", volume = "13", doi = "10.1007/978-94-007-6558-0_53" }
Atanasovska, I., Jelić, M., Mitrović, R.,& Momčilović, D. B.. (2013). The influence of corrosion on stress concentration factor at shaft to flange radius. in Mechanisms and Machine Science Springer Netherlands., 13, 657-666. https://doi.org/10.1007/978-94-007-6558-0_53
Atanasovska I, Jelić M, Mitrović R, Momčilović DB. The influence of corrosion on stress concentration factor at shaft to flange radius. in Mechanisms and Machine Science. 2013;13:657-666. doi:10.1007/978-94-007-6558-0_53 .
Atanasovska, Ivana, Jelić, M., Mitrović, Radivoje, Momčilović, Dejan B., "The influence of corrosion on stress concentration factor at shaft to flange radius" in Mechanisms and Machine Science, 13 (2013):657-666, https://doi.org/10.1007/978-94-007-6558-0_53 . .