Претраживање
Приказ резултата 1-10 од 44
Thermal-hydraulics of helium cooled First Wall channels and scoping investigations on performance improvement by application of ribs and mixing devices
(Elsevier Science Sa, Lausanne, 2016)
The first wall (FW) of DEMO is a component with high thermal loads. The cooling of the FW has to comply with the material's upper and lower temperature limits and requirements from stress assessment, like low temperature ...
Experimental investigations of flow distribution in coolant system of Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2016)
This paper deals with investigations of flow distribution in the coolant system of the Helium-Cooled Pebble -Bed Test Blanket Module (HCPB TBM) for ITER. The investigations have been performed by manufacturing and testing ...
Assessment of the effect of pitting corrosion on fatigue crack initiation in hydro turbine shaft
(Trans Tech Publications Ltd, 2013)
Energy efficiency is a key issue worldwide, and not confined solely to the realm of engineers. Past failures of mechanical power system components must be examined carefully in order to minimise future occurrences and ...
A Heat Conduction and Convection Analytical Benchmark for Adjoint Solution Verification of Computational Fluid Dynamics Codes Used in Reactor Design
(Amer Nuclear Soc, La Grange Pk, 2016)
This work presents a heat transport benchmark problem when modeling the steady-state radial conduction in a fuel rod coupled to the axial heat convection in a coolant surrounding the rod and flowing along it. This benchmark ...
Nonlinear Dynamics as a Tool in Selection of Working Conditions for Radial Ball Bearing
(Springer, 2020)
This paper contains elements of a comprehensive research devoted to the dynamic behavior of radial ball bearings in real working conditions. The general motivation for this topic comes from the requirements for high ...
Thermohydraulic experimental design for the European Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2008)
The peculiarities of the coolant flow in Helium-Cooled-Pebble-Bed Test Blanket Module (TBM) are (i) very intensive heating of the first wall from the plasma side and (ii) very complicated geometry of How domain consisting ...
Design update, thermal and fluid dynamic analyses of the EU-HCPB TBM in vertical arrangement
(Elsevier Science Sa, Lausanne, 2009)
In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) is developed in Forschungszentrum Karlsruhe (FZK) ...
Efficient helium cooling methods for nuclear fusion devices: Status and prospects
(Elsevier Science Sa, Lausanne, 2009)
Helium-cooled reactors offer several important advantages as the helium is an inert and neutron transparent gas. compatible with high outlet temperatures and all structural and functional materials considered for plasma ...
HETRA experiment for investigation of heat removal from the first wall of helium-cooled-pebble-bed test blanket module
(Elsevier Science Sa, Lausanne, 2011)
This paper presents an experimental test section which has been developed at the Institute for Neutron Physics and Reactor Technique in Karlsruhe Institute of Technology for investigations of heat removal from the first ...
Fem model for calculation of hydro turbine shaft
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2010)
This paper describes the real problem calculation of stress state of hydro turbine shaft with crack appearance on shaft-flange radii. Finite element method (FEM) is used for calculation of shaft stress state and shaft ...