Search
Now showing items 1-10 of 16
An example of passive micromixer design, simulation and optimization
(Institute of Electrical and Electronics Engineers Inc., 2015)
The paper presents the designing process of the passive micromixer. Design parameters of microfluidic channel's geometry are optimized based on flow simulation results. CAD software Solid Works and application Flo Xpress ...
An Example of Passive Micromixer Design, Simulation and Optimization Biomedical engineering MSc Thesis
(IEEE, New York, 2015)
The paper presents the designing process of the passive micromixer. Design parameters of microfluidic channel's geometry are optimized based on flow simulation results. CAD software Solid Works and application Flo Xpress ...
TDOA approach for target localization based on improved genetic algorithm
(Institute of Electrical and Electronics Engineers Inc., 2017)
This paper presents a target localization problem based on the time difference of arrival (TDOA) measurements by employing an improved genetic algorithm (GA) for estimation. The weighted least square (WLS) technique is ...
Nozzle Optimization of Dual Thrust Rocket Motors
(Springer International Publishing Ag, Cham, 2020)
Optimizing the nozzle of a solid propellant rocket motor plays an essential rule in the overall performance of the motor. In this paper, the investigation of an optimization model of dual thrust propellant rocket motors ...
Optimal tuning of fractional PIDCα controller in the frequency domain
(Institute of Electrical and Electronics Engineers Inc., 2014)
A new frequency-domain algorithm for optimization of PID regulators having a fractional differential compensator connected in series (PIDCα) has been developed. The adjustable parameters of the regulator are: proportional ...
Optimization of Operation Sequencing in CAPP Using Hybrid Genetic Algorithm and Simulated Annealing Approach
(Novi Sad : Faculty of Technical Sciences, 2012)
In any CAPP system, one of the most important process planning functions is selection of the operations and corresponding machines in order to generate the optimal operation sequence. In this paper, the hybrid GA-SA algorithm ...
Forging Process Modeling by Using Finite Element Analysis
(The Aristotle University of Thessaloniki, 2005)
In recent years, computer-aided engineering (CAE) techniques have been applied increasingly with great success in metal forming research as well as in the forming industry. Possibility to obtain loads, stresses, velocities ...
TDOA based approach for accurate target localization based on hybrid genetic algorithm
(International Scientific Conference on Defensive Technologies (OTEH 2022), 2022)
Accurate localization of target based on time difference of arrival (TDOA) measurements is of crucial importance in a large number of different military and civil applications, especially in security systems, radars, sonars ...
Performance Evaluation of Nonlinear Optimization Methods for TOA Localization Techniques
(Belgrade : Military Technical Institute, 2016)
Source localization based on the time of arrival (TOA) measurements is very important in military and civil applications such as Wireless Sensor Networks (WSNs), sonar, radar, security systems, health monitoring, etc. Some ...
Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint
(Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015), 2015)
The purpose of this work is to present a possible approach to the mass minimization of structural thin-walled open section beams of the proposed shapes (I, Z and U-beam), submitted to the stress constraints and multiple ...