Претраживање
Приказ резултата 1-10 од 20
Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2011)
The paper presents PCBN-Ciborit cutting tools life and wear test results. The effects of the machining regime when turning amorphous-crystalline Fe80B20 and Fe79Cr16B5 coating systems applied to conventional workpiece ...
Fatigue Life Estimation of Notched Structural Components
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2010)
This work considers the analytical/numerical methods and procedures for obtaining the stress intensity factors and for predicting the fatigue crack growth life of notched structural components. Many efforts have been made ...
Experimental Equipment Research for Cryogenic Joule-Thompson Cryocoolers Comparison in IR Technology Sensors
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2011)
This paper shows experimental setup for research of Joule-Thompson cryocoolers performances integrated in Dewar vessels with temperature detector simulator of IR sensor Experimental solutions of transient temperature regimes ...
On the Particles Size Distributions of Diatomaceous Earth and Perlite Granulations
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2011)
When filtering products with a high level of non-soluble solids and containing filtration-inhibiting substances, a variety of different filter aids can be used. Among others, kieselguhr and perlite are possible materials ...
Characterisation of High-Carbon Steel Surface Welded Layer
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2010)
In this paper microstructural and mechanical properties of high-carbon steel surface welded layer obtained with self-shielded flux cored wire are presented in standard rails and crossings. The testing results of tensile ...
Nonlinear Approach to Thin-Walled Beams with a Symmetrical Open Section
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2011)
The principle of virtual work is applied to thin-walled beams with a cross-section with the middle line of an arbitrary curvilinear shape and with a continuously varying thickness. Six equilibrium equations and a seventh ...
An Optimal Main Helicopter Rotor Projection Model Obtained by Viscous Effects and Unsteady Lift Simulation
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2010)
This paper presents on airfoil model which provides a method for optimal main helicopter rotor projection by viscous effect and unsteady lift simulation through algorithm and set of program entireties, applicable to the ...
Manufacturing Cycle Time Analysis and Scheduling to Optimize Its Duration
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2014)
This paper reports the results of investigations on manufacturing cycle times for special-purpose products. The company performs serial production characterized by complex and diverse technologies, alternative solutions ...
Ports Sustainability: A life cycle assessment of Zero Emission Cargo Handling Equipment
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2013)
The goal of this paper is to present and evaluate the latest trends in the cargo handling equipment (CHE) industry, aimed at mitigating the environmental impact of container terminal operations and contributing to the ...
Configuring A Mini-Laboratory and Desktop 3-Axis Parallel Kinematic Milling Machine
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2015)
Configuring new machine tools is a complex task that involves the use of a large range of conceptions, methods, models, virtual prototypes and simulations. This paper presents a methodology for configuring a new machine ...