Претраживање
Приказ резултата 11-20 од 27
Usage Of Modern Graphical 3d Presentations In Development Of Technical Systems
(SUGIG, 2012)
In this paper we explain the best way of making specific number of graphical 3D models of technical systems which could as much as it’s possible make 3D model same as real technical system. We use wide palette of modern ...
Аn algorithm for simulation CMM measuring path based on the CAD model
(Mašinski fakultet, Beograd, 2015)
Automated probe path is possible perform CAD-CAI integrating by algorithms. This paper presents an algorithm for simulation CMM measuring path based on the CAD model of the prismatic part. Input information for simulation ...
A New Approach In Lecture Delivery At The Course On Mechanism Design At The Faculty Of Mechanical Engineering, University Of Belgrade
(SUGIG, 2016)
This paper exposes the new and contemporary approach in lectures delivery at the course on Mechanism Design at the Faculty of Mechanical Engineering, University of Belgrade. Since students already obtained and elaborated ...
Simulation And Motion Study Of Mechanical Integrator 3D Model
(SUGIG, 2018)
A Mechanical Integrator is a mechanical device by which the continual integration of the input variable
value can be obtained. This paper explains the operational principles and discloses the simulation and
motion study ...
Design Study of the Different Metamaterial Shapes
(CNN Tech 2018 "International Conference of Experimental and Numerical Investigations and New Technologies", Book of Abstracts, 2018)
Different geometry of metameterials has ability to withstand a certain level of deformation, and is used to replace joints in certain assemblies of technical systems. Using this characteristic of metametrials, all movements ...
MODELING, SIMULATION AND CONTROL OF WINTER REGIME OF AN AIR CONDITIONING SYSTEM IN A CLASSROOM
(44th International HVAC&R Congress, 2013)
This paper presents analysis of control algorithm in HVAC, with an aim to minimize energy needs and to improve dynamic characteristics of plant. For this study a classroom is used, which is located at Automatic Control ...
Simulacija kinematike troosne paralelne mašine sa translatorno pokretnim aktuatorima duž X ose / Simulation of kinematics of three axes parallel kinematics machine tool with linear actuators along X axis
(Univerzitet u Banja Luci, Mašinski fakultet, 2005)
U radu se razmatra simulacija kinematike jedne troosne paralelne mašine. Poznato je da su oblik i veličina radnog prostora slabost većine mašina sa paralelnom kinematikom (MPK). U radu se razmatra razvijeni paralelni ...
A post‐processor for the five‐axis machine MultiProDesk based on inverse kinematic transformation
(University of Banja Luka, Faculty of Mechanical Engineering, 2023)
This paper shows the development of a post‐processor for a five‐axis table tilting machine. Postprocessing software transforms a machining toolpath in CL file into G‐code, which is necessary for the machining process in ...
Virtual Simulator for five axis vertical Turrning Center in Python graphical Environment Integrated with Open Architecture Control System
(Faculty of Technical Sciences, Department of Production Engineering, 2009)
This paper proposes how to simulate five axis vertical turning center in open architecture software
environment EMC2 (Enhanced Machine Controller). It was shown how to integrate functions of direct and inverse kinematics, ...
Computational modeling and simulation of walking mechanism
(Faculty of Civil engineering and Architecture in NišSerbian Society for Geometry and Graphics SUGIG, 2014)
This paper explains the basic principles on which the walker
mechanism for the rehabilitation of injured people is functioning. This
paper presents the mechanism geometry, kinematics of its work as
well as the appropriate ...