Претраживање
Приказ резултата 1-10 од 10
Modelling of dynamic interaction between structure and trolley for mega container cranes
(Taylor & Francis Inc, Philadelphia, 2009)
This article deals with the analysis of trolley impact on the dynamic behaviour of the flexible structure of the mega quayside container crane (QCC) boom, identified as the most relevant structural part. It develops a ...
Design, modelling and motion simulation of the remontoire mechanism
(Transactions of Famena, 2011)
Remontoire mechanisms are subassemblies of mechanical time keepers, frequently seen inside of large tower and public mechanical clocks. The most important purpose of these mechanisms is to supply a secondary, smooth and ...
Laser light scattering in spray system control
(Trans Tech Publications Ltd, 2002)
A technique applicable to spray systems research and control, based on the measurements of the spatial frequency of scattered light intensity, is presented. Phase Doppler anemometry - a frequently used technique in spray ...
Predicting of milling forces in a virtual manufacturing system
(Univ Osijek, Tech Fac, Slavonski Brod, 2013)
Forces prediction along the tool path is one of the basic goal functions of the virtual machining system for CNC milling operations. In this paper, the discussion is limited to the contour milling in the plane z=const, ...
Identification of modular firefighting superstructures' dynamic behaviour
(Vibromechanika, 2016)
Specific functional requirements for firefighting vehicles have resulted in stricter exploitation regimes and frequent off-road use. Current practice appoints the problem of the strength of a superstructure's modules, which ...
Mechatronic approach to inventing a novel kind of deformeter
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
Stress and strain measurements on frames and structures are mainly conducted by the use of strain gauges. A measuring chain applied in such measurements usually consists of strain gauges, amplifiers and data acquisition ...
Geometrical and mechanical characteristics of deformed balance spring obtained by simulation study
(Sage Publications Ltd, London, 2016)
This paper analyzes the geometrical and mechanical characteristics of balance springs, which have the most important influence on the oscillation rate of the balance wheel and, consequently, the most decisive effects on ...
The Eclipses Abacus, the mechanical predictor of the solar and lunar eclipses
(Sage Publications Ltd, London, 2019)
This paper exposes and explains the synthesis of a mechanism, the Eclipses Abacus, by which the date of solar and lunar eclipses can be predicted and determined sufficiently accurately. Moreover, a three-dimensional (3D) ...
Prediction of calcination and sulphation along the sorbent particle trajectories for desulphurisation in coal-fired furnace
(Inderscience Enterprises Ltd, Geneva, 2020)
The furnace sorbent injection is analysed numerically, focusing on its behaviour, in order to estimate CaCO3 sorbent utilisation. Comprehensive presentation of numerical results and profound analysis are provided to better ...
System Approach to Vehicle Suspension System Control in CAE Environment
(Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, 2011)
In recent years, motor vehicles industry has shown a tendency of replacing electromechanical components by mechatronic systems with intelligent and autonomous properties. The integration of hardware components and ...