Mechatronic approach to inventing a novel kind of deformeter
Апстракт
Stress and strain measurements on frames and structures are mainly conducted by the use of strain gauges. A measuring chain applied in such measurements usually consists of strain gauges, amplifiers and data acquisition and logging device. The applicability of such instrumentation mainly depends on its sensitivity measuring repeatability, accuracy and noiseless operation. The key point of this paper is harmonization of measuring properties for the newly invented deformeter with the measuring electronics. Much alike a standard modeling of Mechatronic items, a very specific CLD (Close Loop Deformeter) is optimized throughout coupled modeling, bridging analysis of 3D virtual model and real design of laboratory prototype. Virtual experiment was developed to correspond with actual measurements on the test rig. The idea of rectification factor is introduced into concept of 3D modelling with an innovative CLD research. The focus of the research was kept on the output linearity, measuring rang...e and resolution of the invented deformeter.
Кључне речи:
transducer / stress / strain gauge / simulation / close loop deformeter / CAD modellingИзвор:
Tehnički vjesnik, 2017, 24, 3, 737-743Издавач:
- Univ Osijek, Tech Fac, Slavonski Brod
DOI: 10.17559/TV-20160711123437
ISSN: 1330-3651
WoS: 000403788500013
Scopus: 2-s2.0-85020909286
Институција/група
Inovacioni centarTY - JOUR AU - Shneba, Giuma Ali AU - Veg, Aleksandar AU - Kozak, Dražan AU - Sedmak, Aleksandar PY - 2017 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2517 AB - Stress and strain measurements on frames and structures are mainly conducted by the use of strain gauges. A measuring chain applied in such measurements usually consists of strain gauges, amplifiers and data acquisition and logging device. The applicability of such instrumentation mainly depends on its sensitivity measuring repeatability, accuracy and noiseless operation. The key point of this paper is harmonization of measuring properties for the newly invented deformeter with the measuring electronics. Much alike a standard modeling of Mechatronic items, a very specific CLD (Close Loop Deformeter) is optimized throughout coupled modeling, bridging analysis of 3D virtual model and real design of laboratory prototype. Virtual experiment was developed to correspond with actual measurements on the test rig. The idea of rectification factor is introduced into concept of 3D modelling with an innovative CLD research. The focus of the research was kept on the output linearity, measuring range and resolution of the invented deformeter. PB - Univ Osijek, Tech Fac, Slavonski Brod T2 - Tehnički vjesnik T1 - Mechatronic approach to inventing a novel kind of deformeter EP - 743 IS - 3 SP - 737 VL - 24 DO - 10.17559/TV-20160711123437 ER -
@article{ author = "Shneba, Giuma Ali and Veg, Aleksandar and Kozak, Dražan and Sedmak, Aleksandar", year = "2017", abstract = "Stress and strain measurements on frames and structures are mainly conducted by the use of strain gauges. A measuring chain applied in such measurements usually consists of strain gauges, amplifiers and data acquisition and logging device. The applicability of such instrumentation mainly depends on its sensitivity measuring repeatability, accuracy and noiseless operation. The key point of this paper is harmonization of measuring properties for the newly invented deformeter with the measuring electronics. Much alike a standard modeling of Mechatronic items, a very specific CLD (Close Loop Deformeter) is optimized throughout coupled modeling, bridging analysis of 3D virtual model and real design of laboratory prototype. Virtual experiment was developed to correspond with actual measurements on the test rig. The idea of rectification factor is introduced into concept of 3D modelling with an innovative CLD research. The focus of the research was kept on the output linearity, measuring range and resolution of the invented deformeter.", publisher = "Univ Osijek, Tech Fac, Slavonski Brod", journal = "Tehnički vjesnik", title = "Mechatronic approach to inventing a novel kind of deformeter", pages = "743-737", number = "3", volume = "24", doi = "10.17559/TV-20160711123437" }
Shneba, G. A., Veg, A., Kozak, D.,& Sedmak, A.. (2017). Mechatronic approach to inventing a novel kind of deformeter. in Tehnički vjesnik Univ Osijek, Tech Fac, Slavonski Brod., 24(3), 737-743. https://doi.org/10.17559/TV-20160711123437
Shneba GA, Veg A, Kozak D, Sedmak A. Mechatronic approach to inventing a novel kind of deformeter. in Tehnički vjesnik. 2017;24(3):737-743. doi:10.17559/TV-20160711123437 .
Shneba, Giuma Ali, Veg, Aleksandar, Kozak, Dražan, Sedmak, Aleksandar, "Mechatronic approach to inventing a novel kind of deformeter" in Tehnički vjesnik, 24, no. 3 (2017):737-743, https://doi.org/10.17559/TV-20160711123437 . .