Pretraživanje
Prikaz rezultata 1-10 od 16
An example of passive micromixer design, simulation and optimization
(Institute of Electrical and Electronics Engineers Inc., 2015)
The paper presents the designing process of the passive micromixer. Design parameters of microfluidic channel's geometry are optimized based on flow simulation results. CAD software Solid Works and application Flo Xpress ...
An Example of Passive Micromixer Design, Simulation and Optimization Biomedical engineering MSc Thesis
(IEEE, New York, 2015)
The paper presents the designing process of the passive micromixer. Design parameters of microfluidic channel's geometry are optimized based on flow simulation results. CAD software Solid Works and application Flo Xpress ...
Optimization of Operation Sequencing in CAPP Using Hybrid Genetic Algorithm and Simulated Annealing Approach
(Novi Sad : Faculty of Technical Sciences, 2012)
In any CAPP system, one of the most important process planning functions is selection of the operations and corresponding machines in order to generate the optimal operation sequence. In this paper, the hybrid GA-SA algorithm ...
Nozzle Optimization of Dual Thrust Rocket Motors
(Springer International Publishing Ag, Cham, 2020)
Optimizing the nozzle of a solid propellant rocket motor plays an essential rule in the overall performance of the motor. In this paper, the investigation of an optimization model of dual thrust propellant rocket motors ...
Optimization of sizing, location and orientation of piezoelectric actuator-sensor pairs on composite plate
(Belgrade : Military Technical Institute, 2014)
Piezoelectric actuators and sensors have a wide range of application in the active vibration control of flexible
structures. Control performances of the smart structures depend on the size and position of piezoelectric ...
Optimal tuning of fractional PIDCα controller in the frequency domain
(Institute of Electrical and Electronics Engineers Inc., 2014)
A new frequency-domain algorithm for optimization of PID regulators having a fractional differential compensator connected in series (PIDCα) has been developed. The adjustable parameters of the regulator are: proportional ...
TDOA approach for target localization based on improved genetic algorithm
(Institute of Electrical and Electronics Engineers Inc., 2017)
This paper presents a target localization problem based on the time difference of arrival (TDOA) measurements by employing an improved genetic algorithm (GA) for estimation. The weighted least square (WLS) technique is ...
Forging Process Modeling by Using Finite Element Analysis
(The Aristotle University of Thessaloniki, 2005)
In recent years, computer-aided engineering (CAE) techniques have been applied increasingly with great success in metal forming research as well as in the forming industry. Possibility to obtain loads, stresses, velocities ...
Planetary gear pair design using metaheuristic algorithms
(10th International Scientific Conference on Defensive Technologies OTEH 2022, 2022)
This paper considers the problem of formulating the non-linear optimization model for determining the optimal parameters of planetary gearbox, which is solved using a metaheuristic optimization algorithm. To determine the ...
Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint
(Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015), 2015)
The purpose of this work is to present a possible approach to the mass minimization of structural thin-walled open section beams of the proposed shapes (I, Z and U-beam), submitted to the stress constraints and multiple ...