Претраживање
Приказ резултата 1-10 од 12
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
Transition temperature and fracture mode of as-castand austempered ductile iron
(Wiley, Hoboken, 2008)
The ductile to brittle transition temperature is a very important criterion that is used for selection of materials in some applications, especially in low-temperature conditions. For that reason, in this paper transition ...
Optimisation of the deposition parameters of thick atmospheric plasma spray coatings
(Journal of the Balkan Tribological Association, 2012)
Plasma spray process is one of the most versatile thermal spray deposition processes. There are great number of parameters that influence the quality and characteristic of deposited coating and their values must be defined ...
Possibility of obtaining favorable mechanical properties of materials for machine elements exposed to wearing and abrasion
(Metalurgia International, 2012)
There are several options for increase resistance to abrasive wear of parts. Inserting the cocoon into the hole of machine part that is exposed to wearing, welding on worn parts, joining by explosion of different materials ...
Laser shock peening of n-155 superalloy after longtime service
(Univ Osijek, Tech Fac, Slavonski Brod, 2013)
Iron base superalloy N-155 samples have been cut from the turbine blade which had been exposed to elevated pressure and temperature during its longtime service. The samples have been irradiated with pulsed laser beam, ...
Impact Toughness of Friction Stir Welded Al-Mg Alloy
(Carl Hanser Verlag, Munich, 2014)
Al-Mg 5083 alloy was friction stir welded by varying welding variables, i.e., rotational speed, traversal speed and tool tilt angle. Welded specimens have been tested by the instrumented Charpy test to evaluate total ...
Selection of the most appropriate welding technology for hardfacing of bucket teeth
(Institute of Metals Technology, 2015)
A possibility of extending the service life of the working parts of construction machinery with particular attention to hardfacing of loader bucket teeth was investigated. In the first part of this paper the tribological ...
Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3
(Taylor & Francis Ltd, Abingdon, 2005)
Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of ...
Optimisation of the deposition parameters of thick atmospheric plasma spray coatings
(Scientific Bulgarian Communications, 2012)
Plasma spray process is one of the most versatile thermal spray deposition processes. There are great number of parameters that influence the quality and characteristic of deposited coating and their values must be defined ...
Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites
(Sage Publications Ltd, London, 2021)
Metal matrix nanocomposites represent a relatively new class of material, which is still being extensively investigated. Most of the studies, however, are devoted to aluminium- or magnesium-based nanocomposites. A limited ...