Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites
Само за регистроване кориснике
2021
Аутори
Vencl, AleksandarKandeva, Mara
Zadorozhnaya, Elena
Svoboda, Petr
Michalec, Michal
Milivojević, Aleksandar
Trdan, Uroš
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Metal matrix nanocomposites represent a relatively new class of material, which is still being extensively investigated. Most of the studies, however, are devoted to aluminium- or magnesium-based nanocomposites. A limited number of studies focus on zinc alloy base nanocomposites, with fewer still concentrating on zinc alloy base micro-nanocomposites. In addition, most of the tribological studies investigate adhesive or abrasive wear resistance, whereas studies of erosive wear resistance lag well behind. It was previously shown that the presence of nanoparticles in ZA-27 alloy-based nanocomposites led to a slight increase in erosive wear resistance. Upon discovering that, the aim became to produce micro-nanocomposites that would retain the positive effect of nanoparticles, while further elevating performance, by combining microparticles with nanoparticles. The ZA-27 alloy-based micro-nanocomposites were reinforced with 3 wt. % Al2O3 microparticles (particle size approx. 36 mu m) and wit...h four different amounts (0.3, 0.5, 0.7 and 1 wt. %) of Al2O3 nanoparticles (particle size 20-30 nm). Tested materials were produced by the compocasting process, with mechanical alloying pre-processing. Solid particle erosive wear testing, with particle impact angle of 90 degrees, showed that all micro-nanocomposites had significantly increased wear resistance in comparison to the reference material.
Кључне речи:
ZA-27 alloy / microstructure / micro-nanocomposites / hardness / erosive wear / compocastingИзвор:
Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applic, 2021, 235, 7, 1509-1518Издавач:
- Sage Publications Ltd, London
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
- National Science Fund of the Ministry of Education and Science, Bulgaria [(sic)H 07/28-15.12.2016]
- Ministry of Education, Youth and Sports of Czech Republic [FSI-S-17-4415]
- state budget by the Slovenian Research Agency Programme [P2-0270]
- CEEPUS network [CIII-BG-0703]
- COST action [CA15102]
- Republic of Serbia [337-00-00111/2020-09/50, BI-RS/20-21-047]
- Republic of Slovenia [337-00-00111/2020-09/50, BI-RS/20-21-047]
DOI: 10.1177/1464420721994870
ISSN: 1464-4207
WoS: 000638755400001
Scopus: 2-s2.0-85100964736
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Vencl, Aleksandar AU - Kandeva, Mara AU - Zadorozhnaya, Elena AU - Svoboda, Petr AU - Michalec, Michal AU - Milivojević, Aleksandar AU - Trdan, Uroš PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3591 AB - Metal matrix nanocomposites represent a relatively new class of material, which is still being extensively investigated. Most of the studies, however, are devoted to aluminium- or magnesium-based nanocomposites. A limited number of studies focus on zinc alloy base nanocomposites, with fewer still concentrating on zinc alloy base micro-nanocomposites. In addition, most of the tribological studies investigate adhesive or abrasive wear resistance, whereas studies of erosive wear resistance lag well behind. It was previously shown that the presence of nanoparticles in ZA-27 alloy-based nanocomposites led to a slight increase in erosive wear resistance. Upon discovering that, the aim became to produce micro-nanocomposites that would retain the positive effect of nanoparticles, while further elevating performance, by combining microparticles with nanoparticles. The ZA-27 alloy-based micro-nanocomposites were reinforced with 3 wt. % Al2O3 microparticles (particle size approx. 36 mu m) and with four different amounts (0.3, 0.5, 0.7 and 1 wt. %) of Al2O3 nanoparticles (particle size 20-30 nm). Tested materials were produced by the compocasting process, with mechanical alloying pre-processing. Solid particle erosive wear testing, with particle impact angle of 90 degrees, showed that all micro-nanocomposites had significantly increased wear resistance in comparison to the reference material. PB - Sage Publications Ltd, London T2 - Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applic T1 - Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites EP - 1518 IS - 7 SP - 1509 VL - 235 DO - 10.1177/1464420721994870 ER -
@article{ author = "Vencl, Aleksandar and Kandeva, Mara and Zadorozhnaya, Elena and Svoboda, Petr and Michalec, Michal and Milivojević, Aleksandar and Trdan, Uroš", year = "2021", abstract = "Metal matrix nanocomposites represent a relatively new class of material, which is still being extensively investigated. Most of the studies, however, are devoted to aluminium- or magnesium-based nanocomposites. A limited number of studies focus on zinc alloy base nanocomposites, with fewer still concentrating on zinc alloy base micro-nanocomposites. In addition, most of the tribological studies investigate adhesive or abrasive wear resistance, whereas studies of erosive wear resistance lag well behind. It was previously shown that the presence of nanoparticles in ZA-27 alloy-based nanocomposites led to a slight increase in erosive wear resistance. Upon discovering that, the aim became to produce micro-nanocomposites that would retain the positive effect of nanoparticles, while further elevating performance, by combining microparticles with nanoparticles. The ZA-27 alloy-based micro-nanocomposites were reinforced with 3 wt. % Al2O3 microparticles (particle size approx. 36 mu m) and with four different amounts (0.3, 0.5, 0.7 and 1 wt. %) of Al2O3 nanoparticles (particle size 20-30 nm). Tested materials were produced by the compocasting process, with mechanical alloying pre-processing. Solid particle erosive wear testing, with particle impact angle of 90 degrees, showed that all micro-nanocomposites had significantly increased wear resistance in comparison to the reference material.", publisher = "Sage Publications Ltd, London", journal = "Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applic", title = "Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites", pages = "1518-1509", number = "7", volume = "235", doi = "10.1177/1464420721994870" }
Vencl, A., Kandeva, M., Zadorozhnaya, E., Svoboda, P., Michalec, M., Milivojević, A.,& Trdan, U.. (2021). Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites. in Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applic Sage Publications Ltd, London., 235(7), 1509-1518. https://doi.org/10.1177/1464420721994870
Vencl A, Kandeva M, Zadorozhnaya E, Svoboda P, Michalec M, Milivojević A, Trdan U. Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites. in Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applic. 2021;235(7):1509-1518. doi:10.1177/1464420721994870 .
Vencl, Aleksandar, Kandeva, Mara, Zadorozhnaya, Elena, Svoboda, Petr, Michalec, Michal, Milivojević, Aleksandar, Trdan, Uroš, "Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites" in Proceedings of The Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applic, 235, no. 7 (2021):1509-1518, https://doi.org/10.1177/1464420721994870 . .