Претраживање
Приказ резултата 1-8 од 8
Modelling of ductile crack growth in welded joints using micromechanical failure criterion
(17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components, 2008)
In this paper, ductile crack growth in strength mismatched welded joints is considered. High-strength low-alloyed (HSLA) steel in quenched and tempered condition is used as the base metal. Two different fillers are selected ...
API J55 Steel Casing Pipe with an Initial Surface Crack under Internal Pressure - Determination of Fracture Parameters
(Trans Tech Publications Ltd, Durnten-Zurich, 2012)
Seam casing pipe used in an oil drilling rig, manufactured by high frequency (HF) contact welding of API J55 steel, is tested. The influence of an initial defect (machined surface crack) is analysed, by performing pressure ...
Model analysis of bucket wheel excavator SchRs 630 strength
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
The possibilities of testing real constructions are often limited, especially in case of large constructions. The idea of model testing is to create a sub-scaled model in order to anticipate the behavior of the real ...
Effect of Exploitation Conditions and Flaw Geometry on the Load Carrying Capacity of Casing Pipes for Oil Drilling Rigs
(Trans Tech Publications Ltd, Durnten-Zurich, 2014)
The subject of this work is examination of API J55 steel casing pipes manufactured by high frequency (HF) contact welding. Since the pipes were withdrawn after about 70 000 hours of service in an oil drilling rig, the ...
Remaining strength of API J55 steel casing pipes damaged by corrosion
(Elsevier Sci Ltd, Oxford, 2020)
Experimental investigation of the integrity of casing pipes, used in the oil drilling rigs, withdrawn after about 70,000 h of service, has been conducted, together with numerical simulation. Pipes were manufactured by the ...
Stress intensity factors numerical calculations for two penny shaped cracks in the elastic solid
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
In the face of enormous costs of developing new aircraft, high fuel prices, increasingly demanding environmental standards, harsh economic race and the fight against competing manufacturers, today's aviation is adapting ...
Human factor risk management procedures applied in the case of open pit mine
(Pergamon-Elsevier Science Ltd, Oxford, 2021)
Risk management aims to provide a controlled work environment to ensure the safe operation of the high-risk systems. It is a dynamic process which work in a continual state of change. The issue of human factor risk and ...
Experimental and numerical analysis of stress-strain field of the modelled boiler element
(Springer, 2021)
Hot water boilers are most commonly used devices in thermal and industrial plants for heat production. Boilers elements are exposed to high pressures and temperatures during boiler operation. Non-stationary working regimes ...