Претраживање
Приказ резултата 1-10 од 21
Editorial
(Elsevier B.V., 2018)
Fracture and fatigue behaviour of implants made of Ti alloys
(Elsevier B.V., 2019)
This paper presents an analysis of Ti alloys used in biomedical applications, such as artificial joint implants and fixation plates, from a fracture mechanics perspective, including fatigue crack initiation and propagation ...
Numerical simulation of fatigue crack growth in AA6156 T6 panels
(Elsevier B.V., 2021)
Fatigue crack growth in a panel with 4 stringers and 3-clips, made of AA6156 T6, was modelled numerically using xFEM. The central crack of the length a=17 mm was propagated in the total of 91 steps (in each step crack ...
Fracture behavior of reactor steel 20MnMoNi 55 in the transition temperature region
(Elsevier B.V., 2021)
The fracture represents the final phase of crack propagation, and the causes of their occurrence or partial crack propagation in the real constructions made of ferritic steels can be different. Along with cracks, influences ...
Crack path direction in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite
(Elsevier BV, 2022)
Plane-strain fracture toughness is one of the main parameters in linear elastic fracture mechanics and its purpose is to show the material capability to withstand load while having a defect. Main validity aspect for such ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Additively manufactured tensile ring-shaped specimens for pipeline material fracture examination - influence of geometry
(ESIS Publishing House (ESIS-PH) European Conference on Fracture, 2022)
Plane-strain fracture toughness is one of the main parameters in linear elastic
fracture mechanics and its purpose is to show the material capability to withstand load while
having a defect. Main validity aspect for such ...
Editorial of the 2nd IRAS conference
(Procedia Structural Integrity, 2023)
The Second International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023) took place between 2-4 April 2023 at the Faculty of Mechanical Engineering of the University of Belgrade. The ...
Layer thickness influence on impact properties of FDM printed PLA material
(Elsevier, 2024)
Polylactic Acid (PLA) is a widely used material in Fused Deposition Modeling (FDM) technology. Additive Manufacturing (AM) parameters are known to have an influence on the mechanical properties of final components. In FDM, ...
Analysis of fatigue behaviour of a bridge welded structure
(Procedia Structural Integrity, 2022)
Results of extensive experiments involving the fatigue behaviour of welded structures which are a part of the “Gazela” bridge in Belgrade, Serbia, are presented in this paper. After non-destructive testing of these structures, ...